Professional Documents
Culture Documents
Preferred Device
http://onsemi.com
1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%.
1 Drain 2 Gate Y WW
3 Source
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
BS107, BS107A
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
ZeroGateVoltage Drain Current (VDS = 130 Vdc, VGS = 0) DrainSource Breakdown Voltage (VGS = 0, ID = 100 Adc) Gate Reverse Current (VGS = 15 Vdc, VDS = 0) IDSS V(BR)DSX IGSS VGS(Th) rDS(on) 4.5 4.8 28 14 6.0 6.4 200 0.01 30 10 nAdc Vdc nAdc
SMALLSIGNAL CHARACTERISTICS
Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Forward Transconductance (VDS = 25 Vdc, ID = 250 mAdc) Ciss Crss Coss gfs 200 60 6.0 30 400 pF pF pF mmhos
SWITCHING CHARACTERISTICS
TurnOn Time TurnOff Time 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%. ton toff 6.0 12 15 15 ns ns
RESISTIVE SWITCHING
+25 V 23 PULSE GENERATOR 50 Vin 40 pF 1M 20 dB 50 ATTENUATOR TO SAMPLING SCOPE 50 INPUT Vout ton 90% toff 90% 10% 90% 50% 10% PULSE WIDTH 50%
50
http://onsemi.com
2
BS107, BS107A
10 VDS , DRAIN-SOURCE VOLTAGE (VOLTS) 5.0 2.0 1.0 0.5 0.2 0.1 -55 -35 -15 85 105 65 +5.0 25 45 TJ, JUNCTION TEMPERATURE (C) 125 145 100 mA 200 180 160 C, CAPACITANCE (pF) VGS = 10 V 250 mA 140 120 100 80 60 40 20 0 0 Crss Coss 40 10 20 30 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 50 Ciss VGS = 0 V
0.8 ID(on) , DRAIN CURRENT (AMPS) VGS = 10 V I D(on) , DRAIN CURRENT (AMPS) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1.0 5.0 6.0 7.0 8.0 2.0 3.0 4.0 VGS, GATE-SOURCE VOLTAGE (VOLTS) 9.0 10
10 V
5.0 V
4.0 V
10 V 5.0 V
4.0 V
http://onsemi.com
3
BS107, BS107A
ORDERING INFORMATION
Device
BS107 BS107RLRA BS107RL1 BS107A BS107ARLRM BS107ARLRP BS107ARL1
Package
TO92 TO92 TO92 TO92 TO92 TO92 TO92
Shipping
1000 Unit/Box 2000 Tape & Reel 2000 Tape & Reel 1000 Units/Box 2000 Ammo Pack 2000 Ammo Pack 2000 Tape & Reel
http://onsemi.com
4
BS107, BS107A
PACKAGE DIMENSIONS
TO92 CASE 2911 ISSUE AL
A R P L
SEATING PLANE
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 ---
X X G H V
1
D J C SECTION XX N N
DIM A B C D G H J K L N P R V
http://onsemi.com
5
BS107, BS107A
Notes
http://onsemi.com
6
BS107, BS107A
Notes
http://onsemi.com
7
BS107, BS107A
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com
8
BS107/D