Professional Documents
Culture Documents
Indicator Sizes: There are four sizes of EN Image Quality Indicators. Size 1 contains wire numbers 1 to 7 and used for material thicknesses in the range of 40 to 160mm Size 6 contains wire numbers 6 to 12 and used for material thicknesses in the range of 12.5 to 50mm Size 10 contains wire numbers 10 to 16 and used for material thicknesses in the range of 5 to 20mm Size 13 contains wire numbers 13 to 19 and used for material thicknesses in the range 2.5 to 10mm All sizes are available in Steel (Fe), Aluminium (Al), and Copper (Cu.) Titanium (Ti) Image Quality Indicators are only available in sizes 10 and 13. As an illustration the identification (i.e. lead monogram) for, say Size 1 (Wire numbers 1 to 7) in steel (Fe) would be 1 FE EN All EN Image Quality Indicators are individually numbered and supplied with a Certificate of Conformity, with or without wallets. (Please specify) Product Codes (10mm long): F00.2001 to F00.2014 Product Codes (25mm long): DIN 54 109 Wire Type Image Quality Indicators are similar to the EN 462-1:1994 I.Q.Is, the wire diameters are the same, and there are the same wire numbers in each size of Indicator. The only difference being that the lead monogram reads DIN rather than EN. Example; Size 1 (Wire numbers 1 to 7) in Steel (Fe) would be 1 FE DIN. DIN 54 109 Wire Type Image Quality Indicators are only available in Steel (Fe), Aluminium (Al) and Copper (Cu) but can be supplied with either 10mm, 25mm or 50mm long wires. All indicators have a serial number for Quality Assurance purposes, from which can be traced to the measured wire diameters and date of manufacture. A Certificate of Conformity is optionally available at additional cost. Product Codes (50mm long): F00.1980 to F00.1994
Set No. A Wire No 1 2 3 4 5 6 Dia. mm 0.08 0.10 0.13 0.16 0.20 0.25 F00.2101 Dia. Ins 0.0032 0.0040 0.0050 0.0063 0.0080 0.0100
Available for Fe, Cu, Al & Ti. For material 6.35 to 19mm thick.
F00.2111
Set No.
Wire No. 1 2 3 4 5 6
Available for Fe, Cu, Al & Ti. For material 19 to 44.5mm thick.
F00.2041 to F00.2052
Product Code 25mm:
B F00.2102 Dia. mm 0.81 1.02 1.27 1.60 2.03 2.50 F00.2103 Set No.
Product Code 50mm: Dia. Ins 0.032 0.040 0.050 0.063 0.080 0.100
F00.2061 to F00.2072
Set No. C
Wire N 1 2 3 4 5 6
F00.2081 to F00.2092
Available for Fe, Cu & Al. For material 44.5 to 102mm thick.
ASTM E747-84a / ASME SE747-97a wire type penetrameters consists of a series of six parallel wires of different thicknesses, 25 or 50mm long, encapsulated between two thin sheets of transparent, flexible PVC. Lead characters identify the thickness of the thickest wire, and the material group. The letters ASTM are also included. Sets A, B and C are available with wires either 25 or 50mm long. Set D is only available with wires 50mm long A Certificate of Conformity is available for each of the above Wire Type I.Q.I.s.
Product Code 50mm: Wire N 1 2 3 4 5 6 Dia. mm 2.50 3.20 4.06 5.10 6.40 8.00
F00.2113 Dia. Ins 0.100 0.128 0.160 0.200 0.250 0.320 F00.2114
PAGE 12