Professional Documents
Culture Documents
LC-42/46D85U
SERVICE MANUAL
No. S98Q9LC42D85U
MODELS
LC-42D85U LC-46D85U
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the LC-52D85U and is changed some parts. This Service Manual covers the modifications alone. For the other points, refer to the LC-52D85U (No. S88N8LC52D85U) Service Manual.
CONTENTS
OUTLINE AND DIFFERENCES FROM BASE MODEL OUTLINE.................................................................... i DIFFERENCES FROM BASE MODEL...................... i SAFETY PRECAUTION IMPORTANT SERVICE SAFETY PRECAUTION........................................................... ii PRECAUTIONS A PRENDRE LORS DE LA REPARATION ...........................................................iii PRECAUTIONS FOR USING LEAD-FREE SOLDER .................................................................. iv PRECAUTIONS IN SERVICING THE HDCPKEY ROM.................................................................. v CHAPTER 1. SPECIFICATIONS [1] SPECIFICATIONS .................................................1-1 CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL ..........................................2-1 CHAPTER 3. DIMENSIONS [1] DIMENSIONS ........................................................3-1 CHAPTER 4. REMOVING OF MAJOR PARTS [1] REMOVING OF MAJOR PARTS (LC-42D85U) .....4-1 [2] REMOVING OF MAJOR PARTS (LC-46D85U) .....4-7 CHAPTER 5. ADJUSTMENT [1] ADJUSTMENT PROCEDURE ...............................5-1 CHAPTER 6. OVERALL WIRING DIAGRAM [1] OVERALL WIRING DIAGRAM (LC-42D85U) ........6-1 [2] OVERALL WIRING DIAGRAM (LC-46D85U) ........6-2 Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-42/46D85U
LC-42/46D85U
PRINTED WIRING BOARD ASSEMBLIES KEY Unit MAIN Unit R/C, LED Unit POWER Unit LCD PANEL 42LCD Panel Module Unit 46LCD Panel Module Unit 52LCD Panel Module Unit MAIN Unit D1306 R601 R602
R1LK520D3LW50Z
CABINET AND MECHANICAL PARTS Please refer to a Parts list PACKING PARTS AND ACCESSORIES Please refer to a Parts list
LC-42/46D85U
LC-42/46D85U
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRECAUTION
Service Manual
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing.
Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15F capacitor in series with all exposed metal cabinet parts and a known earth ground, such as electrical conduit or electrical ground connected to an earth ground. Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resistor. Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used only for the purpose of completing these checks.) Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner.
C A U T I O N : F O R C O N T I N U E D PROTECTION AGAINST A RISK OF FIRE REPLACE ONLY WITH SAME TYPE FUSE.
F7000 (250V T6.3AH) (LC-46D85U) F7000 (250V T5AH) (LC-42D85U)
DVM AC SCALE
1.5k ohm 10W
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by " " and shaded areas in the Replacement Parts List and Schematic Diagrams. /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// For continued protection, replacement parts must be identical to those used in the original circuit. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards.
ii
AVERTISSEMENT
1. N'entreprendre aucune modification de tout circuit. C'est dangereux. 2. Dbrancher le rcepteur avant toute rparation.
A l'aide de deux fils pinces, brancher une rsistance de 1.5 k 10 watts en parallle avec un condensateur de 0.15F en srie avec toutes les pices mtalliques exposes du coffret et une terre connue comme une conduite lectrique ou une prise de terre branche la terre. Utiliser un voltmtre CA d'une sensibilit d'au moins 5000/V pour mesurer la chute de tension en travers de la rsistance. Toucher avec la sonde d'essai les pices mtalliques exposes qui prsentent une voie de retour au chssis (antenne, coffret mtallique, tte des vis, arbres de commande et des boutons, cusson, etc.) et mesurer la chute de tension CA en-travers de la rsistance. Toutes les vrifications doivent tre refaites aprs avoir invers la fiche du cordon d'alimentation. (Si ncessaire, une prise d'adpatation non polarise peut tre utilise dans le but de terminer ces vrifications.) La tension de pointe mesure ne doit pas dpasser 0.75V (correspondante au courant CA de pointe de 0.5mA). Dans le cas contraire, il y a une possibilit de choc lectrique qui doit tre supprime avant de rendre le rcepteur au client.
PRECAUTION: POUR LA PROTECTION CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE
DVM ECHELLE CA
1.5k ohm 10W
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
iii
Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing PARTS CODE ZHNDAi123250E ZHNDAi126500E ZHNDAi12801KE PRICE RANK BL BK BM PART DELIVERY J J J DESCRIPTION 0.3mm 250g (1roll) 0.6mm 500g (1roll) 1.0mm 1kg (1roll)
iv
The HDCP-KEY ROM shall be protected and managed for its information inside. In servicing this ROM, therefore, take the following information protection/management measures. 1) When disposing of the component parts and PWBs, destruct the IC itself in a proper way. (For repairing or replacing the component parts and PWBs as well as clearing those in stock) 2) In storing the component parts, protect and manage them against theft and disclosure. (For storing the service parts, service units, etc.)
LC-42/46D85U
CHAPTER 1. SPECIFICATIONS
LC-42/46D85U
Service Manual
[1] SPECIFICATIONS
Item LCD panel Resolution TV-standard (CCIR) VHF/UHF CATV TV Function Receiving Channel Model: LC-42D85U Model: LC-46D85U
46" Class (45 63/ 64 " Diagonal) 42" Class (42 1/ 64 " Diagonal) Advanced Super View & BLACK TFT LCD Advanced Super View & BLACK TFT LCD 2,073,600 pixels (1,920 1,080) American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-135ch (non-scrambled channel only)
1-135ch (non-scrambled channel only) BTSC System 10W 2 AV in, COMPONENT in COMPONENT in, S-VIDEO in ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in ( 3.5 mm jack) HDMI in with HDCP, Audio in ( 3.5 mm jack) HDMI in with HDCP HDMI in with HDCP HDMI in with HDCP 75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) 1 (PCM/Dolby Digital) Audio in ( 3.5 mm jack) Optical Digital audio output Audio out 9-pin D-sub male connector AV in HDMI in with HDCP Software update English/French/Spanish AC 120 V, 60 Hz (FOR NORTH AMERICA) AC 110-240 V, 50/60 Hz (FOR OTHERS) 225 W (0.4 W Standby with AC 120 V) 46.3 lbs./21.0 kg 39.7 lbs./18.0 kg 40 11/ 64 40 / 64
11
Audio multiplex Audio out INPUT 1 INPUT 2 INPUT 4 INPUT 6 INPUT 7 Rear Terminals INPUT 8 INPUT 9 ANT/CABLE AUDIO DIGITAL AUDIO OUTPUT OUTPUT RS-232C INPUT 3 Side OSD language Power Requirement Power Consumption Weight Dimension (W H D)
*1 *2 *2
INPUT 5 SERVICE
27 9/ 16 25 / 16
9
43 53/ 64 43 / 64
53
29 45/ 64 27 / 64
47
Operating temperature
Emergency alert messages via Cable are unreceivable. The dimensional drawings are shown on the inside back cover. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
11
LC-42/46D85U
Service Manual
Part Names
TV (Front)
Remote control sensor OPC sensor *
TV (Rear/Side)
POWER button
AC INPUT terminal
INPUT 8 terminal (HDMI) ) DIGITAL AUDIO OUTPUT terminal AUDIO OUTPUT terminals
Antenna/Cable in
INPUT 1 terminals INPUT 3 terminals INPUT 4 terminal (PC-IN) SERVICE terminal AUDIO terminal (shared for INPUT 4 and INPUT 6) INPUT 6 terminal (HDMI) INPUT 2 terminals RS-232C terminal
The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations. The examples used throughout this manual are based on the LC-42D85U model.
21
LC-42/46D85U
Part Names
1 2 3 4
TV POWER: Switch the TV power on or enters standby. DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off. External equipment operational buttons: Operate the external equipment. 0_9: Set the channel. (DOT): INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT 8, INPUT 9) VOL / : Set the volume.
2 3 4
18
6 7
19
8 9
5 6 7 8 9 10 20 21 22 23 24 25 11 12 13 14 15 16 26 27 28 29 30
10 FREEZE: Set the still image. Press again to return to normal screen. 11 EXIT: Turn off the menu screen. 12 OPTION: Display the AQUOS LINK MENU screen. This button will function only when AQUOS LINK is used. 13 REC STOP: Stops one touch recording. This button will function only when AQUOS LINK is used. 14 SLEEP: Set the sleep timer. 15 SURROUND: Select Surround settings. 16 AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts. 17 FUNCTION: Switches the remote control for TV, CBL/SAT, VCR, DVD and AUDIO operation. Indicator lights up for the current mode. * To enter the code registration mode, you need to press FUNCTION and DISPLAY at the same time. 18 LIGHT : When this button is pressed, some buttons (for example, VOL / and CH / ) on the remote control unit will light. The lighting will turn off if no operations are performed within about 5 seconds. This button is used for performing operations in low-light situations. 19 VIEW MODE: Select the screen size. 20 ENT: Jumps to a channel after selecting with the 0_9 buttons. 21 FLASHBACK: Return to the previous channel or external input mode. 22 CH / : Select the channel. 23 MUTE: Mute the sound. 24 MENU: Display the menu screen. 25 / / / ,ENTER: Select a desired item on the screen. 26 RETURN: Return to the previous menu screen. 27 FAVORITE CH A, B, C, D: Select 4 preset favorite channels in 4 different categories. While watching, you can toggle the selected channels by pressing A, B, C and D. 28 FAVORITE: Set the favorite channels. 29 CC: Display captions from a closed-caption source. 30 AV MODE: Select an audio or video setting. (When the input source is TV, INPUT 1, 2 or 3: STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the input source is INPUT 4, 5, 6, 7, 8 or 9: STANDARD, MOVIE, GAME, PC, USER, DYNAMIC (Fixed), DYNAMIC)
22
LC-42/46D85U
QUICK REFERENCE
Attaching the Stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confirm that there are 8 screws (4 short screws and 4 long screws) and a hex key supplied with the stand unit.
3 Insert the stand into the openings on the bottom of the TV.
Insert and tighten the 4 short screws into the 4
2 Attach the supporting post for the stand unit onto the base using the box for the stand unit as shown below.
The supporting post attaches to the base at an off-centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.
Long screws Hex key
Short screws
Soft cushion
1 1
23
LC-42/46D85U
Appendix
Removing the Stand
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching the stand Before performing work, make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Hex key
Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)
This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV You can ask a qualified service professional about using an optional AN-52AG4 bracket to mount the TV on the wall. Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-52AG4 wall mount bracket. (See the bracket instructions for details.)
About setting the TV angle
/ 15/ 20 0/ 5/ 10
The " b" position is at the center of the display. Refer to the operation manual of AN-52AG4 for details.
Vertical mounting
Angular mounting
Detach the cable clamp on the rear of the TV when using the optional mount bracket. To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
24
LC-42/46D85U
Appendix
Troubleshooting
Problem No power Possible Solution Check if you pressedTV POWER on the remote control unit. If the indicator on the TV does not light up, press POWER on the TV. Is the AC cord disconnected? Has the power been turned on? External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. Is the FUNCTION set correctly? Set it to the TV setting position. Are batteries inserted with polarity ( , ) aligned? Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting? Is a fluorescent light illuminated near the remote control sensor? Is the image position correct? Are screen mode adjustments such as picture size made correctly? Adjust the picture tone. Is the room too bright? The picture may look dark in a room that is too bright. Check the input signal setting. Is the sleep timer set? Check the power control settings. The unit's internal temperature has increased. Remove any objects blocking vent or clean. Is connection to other components correct? Is correct input signal source selected after connection? Is the correct input selected? Is picture adjustment correct? Is "On" selected in "Audio Only"? Is a non-compatible signal being input? Is the volume too low? Is "Variable" selected in "Output Select"? Have you pressed MUTE on the remote control unit? This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance.
Picture is cut off/with sidebar screen. Strange color, light color, or color misalignment Power is suddenly turned off.
No picture
No sound
Troubleshooting-Digital Broadcasting
The error message about reception of broadcast
The example of an error message displayed on a screen Failed to receive broadcast. No broadcast now. Error code E202 E203 Possible Solution Check the antenna cable. Check that the antenna is correctly setup. Check the broadcast time in the program guide.
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: 4F to 140F ( 20C to 60C)
25
LC-42/46D85U
Audio Menu Treble Bass Balance Surround Bass Enhancer Reset Power Control Menu Power Saving No Signal Off No Operation Off Setup Menu Input Skip Input Signal Auto Sync. Input Label Fine Sync. Position Language Reset
Option Menu AQUOS LINK Setup Audio Only HDMI Setup PC Audio Select Output Select Game Play Time Operation Lock Out Demo Mode
Some menu items may not be displayed depending on the selected input source.
26
LC-42/46D85U
CHAPTER 3. DIMENSIONS
LC-42/46D85U
Service Manual
[1] DIMENSIONS
LC-42D85U
40 11/ 64 (1020)
36 3/4 (933.2)
27 9 /16 (700) 25 9 /16 (649)
20 23 /32 (526)
15 3 /4 (400)
21
21/32 (550)
2 1 / 64 (51)
4 57/ 64 (124)
3 25/ 32 (96)
15 3 /4 (400)
15 3 / 4 (400)
7 7/ 8 (200)
12 61/ 64 (329)
LC-46D85U
43 53/ 64 (1113)
29 45/ 64 (754)
27 47/ 64 (704)
40 19/ 64 (1023.4)
16 25/ 32 (426)
22 43/ 64 (575.6)
21 21/ 32 (550)
1 63/ 64 (50)
15 3/ 4 (400)
4 47/ 64 (120)
3 29/ 32 (99)
15 3/ 4 (400)
6 3/ 4 (174.3)
12 61/ 64 (329)
31
LC-42/46D85U
Manual
Rear Cabinet
Front Cabinet
Stand
41
LC-42/46D85U
5. Remove the 1 lock screw and detach the Bottom Cover. 6. Disconnect SP-Wire. 7. Remove the 2 lock screws and detach the Speaker-LR. 8. Detach the R/C, LED Unit, and disconnect RA-Wire. 9. Detach the KEY Unit Ass'y. 10.Detach the KEY Unit from the KEY Button Cover, and disconnect KM-Wire.
KEY Unit
10
KM
8
RA SP
RA
8
R/C, LED Unit
6
Speaker-L
SP
7
Bottom Cover
42
LC-42/46D85U
11.Remove the 2 lock screws and detach the Side AV Cover. 12.Remove the 11 lock screws, 4 lock shafts, 4 lock screws, 2 lock screws and detach the Main Shield.
12 12 12 12
Main Shield
11
Side AV Cover
43
LC-42/46D85U
13.Disconnect all the connectors from all the PWBs.
LB2 LB1 LP PD PD PL
LB2 LA
13
LA
13
KM LW
13
LP LW PL
13
44
LC-42/46D85U
14.Remove the 7 lock screws and detach the MAIN Unit, Heat Sink Ass'y. 15.Remove the 4 lock screws and detach the POWER Unit Ass'y.
15
MAIN Unit POWER Unit
14
Heat Sink Ass'y
14
45
LC-42/46D85U
16.Remove the 4 lock screws and detach the Control Shield. 17.Remove the 16 lock screws and detach the Panel Support Angle. 18.Remove the 10 lock screws and detach the LCD Panel Module.
17
17
18
18
Control Shield
16
46
LC-42/46D85U
Rear Cabinet
Front Cabinet
Stand
47
LC-42/46D85U
5. Remove the 1 lock screw and detach the Bottom Cover. 6. Disconnect SP-Wire and detach the Speaker-LR. 7. Detach the R/C, LED Unit, and disconnect RA-Wire. 8. Detach the KEY Unit Ass'y. 9. Detach the KEY Unit from the KEY Button Cover, and disconnect KM-Wire.
KEY Unit
9
KM
8
KEY Button Cover
7
RA SP
RA
7
Speaker-R
SP
SP
Speaker-L
48
LC-42/46D85U
10.Remove the 2 lock screws and detach the Side AV Cover. 11.Remove the 11 lock screws, 4 lock shafts, 4 lock screws, 2 lock screws and detach the Main Shield.
11 11 11 11
Main Shield
Side AV Cover
10
49
LC-42/46D85U
12.Disconnect all the connectors from all the PWBs.
LB2
12
LB2 LB1 PD PL PD LW
LA
12
LA
LP KM
12
LP LW
PL
12
4 10
LC-42/46D85U
13.Remove the 7 lock screws and detach the MAIN Unit, Heat Sink Ass'y. 14.Remove the 6 lock screws and detach the POWER Unit Ass'y.
MAIN Unit
14 13
Heat Sink Ass'y POWER Unit
13
4 11
LC-42/46D85U
15.Remove the 4 lock screws and detach the Control Shield. 16.Remove the 16 lock screws and detach the Panel Support Angle. 17.Remove the 8 lock screws and detach the LCD Panel Module.
16
16
17
17
Control Shield
15
4 12
LC-42/46D85U
CHAPTER 5. ADJUSTMENT
LC-42/46D85U
Service Manual
Output
51
LC-42/46D85U
MEMO
52
LC-42/46D85U
Service Manual
12
13 14 15 16 17 18 19 20 21 22
10
11
61
LC-42/46D85U
12
13 14 15 16 17 18 19 20 21 22
10
11
62
PartsGuide
LC-42/46D85U
PARTS GUIDE
No. S98Q9LC42D85U
Note: The reference numbers on the PWB are arranged in alphabetical order.
MODELS
CONTENTS
LC-42D85U LC-46D85U
[1] [2]
PRINTED WIRING BOARD ASSEMBLIES LCD PANEL (NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.) DUNTKE716FM01 (MAIN Unit) CABINET AND MECHANICAL PARTS (LC-42D85U) CABINET AND MECHANICAL PARTS (LC-46D85U)
[6] [7]
SUPPLIED ACCESSORIES PACKING PARTS (NOT REPLACEMENT ITEM) (LC-42D85U) PACKING PARTS (NOT REPLACEMENT ITEM) (LC-46D85U) SERVICE JIG (USE FOR SERVICING)
[8]
[3] [4]
[9]
[5]
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-42/46D85U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
[2] LCD PANEL (NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.)
N N D1306 R601 R602 R1LK420D3LW50Z R1LK460D3LW50Z EA EH N N J J 42" LCD Panel Module Unit (LC-42D85U) 46" LCD Panel Module Unit (LC-46D85U)
LC-42/46D85U
48 3 6 41 21 49 21 8 42 33 1-5 2 28 52 7 9 1-6 40 5 1-2 1 1-7 1-4 1-1 2-2 44 6-2 6-1 32 6-3 51
1-6
48
1-5
KEY Unit
5-1 5-2 2-1 49 52
34
39 53 51 10 37 35
36
45 51 47 22
46 31 24 29 11 26
14 14
POWER Unit 23
51
38 27 25
54
51
30 51 4-1 4-2
12 13 19 17 12
51 17 18
MAIN Unit
57
55 57 55
15
56 55
19 20 43 16
LC-42/46D85U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N N N N N N N N N N N N
N N N N
N N N
N N N
LC-42/46D85U
41 3
KEY Unit
1-5 5-1 5-2 2-1
2-2
POWER Unit
15 11 44
33
MAIN Unit
54
52 54 52
12
13 47 13 36 14
53 52
14
14 49 48 49
LC-42/46D85U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N
N N
N N N N
N N N N N
LC-42/46D85U
X2
Cable Clamp
X3
AC Cord
X4
X8
Operation Manual
X9
Stand Unit
X10
X10-1
X5 X6 X7
NO.
PARTS CODE
PART DELIVERY
DESCRIPTION
X1 X2 X3 X4 X5 X6 X7 X8 X8 X9 X10 X10-1
LHLDWA083WJ00 LHLDWA173WJKZ QACCDA039WJPZ RRMCGA724WJSA TCADEA243WJZZ Not Available Not Available TINS-D813WJN2 TINS-D813WJN1 Not Available CDAI-A499WJ31 CX-BZA208WJ01
AD AE AQ AX AD AN AN BR AM
N N N N
J J J X X X X X X
Cable Band Cable Clamp AC Cord Remote Control Unit Enquete Card Transition Note Extend Warranty Operation Manual (LC-42D85U) Operation Manual (LC-46D85U) "AAA" Size Battery Stand Unit Stand Screw Ass'y
LC-42/46D85U
S6
S5
S7
S5 S2 S4 S8
S3
S5
S5 S9
S1
LC-42/46D85U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
LC-42/46D85U
S7 S6
S8
S6
S6
S1
S5 S9 S3 S4
S6 S6 S10
S6
S2
10
LC-42/46D85U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
11
LC-42/46D85U
COPYRIGHT
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
SHARP CORPORATION Nov. 2008 TQ2646-S MI. KD AV Systems Group CS Promotion Center Yaita, Tochigi 329-2193, Japan