Professional Documents
Culture Documents
D Low Input Bias and Offset Currents D Output Short-Circuit Protection D Low Total Harmonic
Distortion . . . 0.003% Typ
D D D D
High Input Impedance . . . JFET-Input Stage Latch-Up-Free Operation High Slew Rate . . . 13 V/s Typ Common-Mode Input Voltage Range Includes VCC+
description/ordering information
The TL08x JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient. Offset adjustment and external compensation options are available within the TL08x family. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from 40C to 85C. The Q-suffix devices are characterized for operation from 40C to 125C. The M-suffix devices are characterized for operation over the full military temperature range of 55C to 125C. ORDERING INFORMATION
TJ VIOmax AT 255C PDIP (P) PDIP (N) PACKAGE Tube of 50 Tube of 50 Tube of 25 Tube of 75 Reel of 2500 Tube of 75 SOIC (D) 0C to 70C 15 mV SOP (PS) SOP (NS) Reel of 2500 Tube of 50 Reel of 2500 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 150 Reel of 2000 TSSOP (PW) Tube of 90 Reel of 2000 ORDERABLE PART NUMBER TL081CP TL082CP TL084CN TL081CD TL081CDR TL082CD TL082CDR TL084CD TL084CDR TL081CPSR TL082CPSR TL084CNSR TL082CPW TL082CPWR TL084CPW TL084CPWR T084 T082 TL084C T081 T082 TL084 TL082C TL081C TOP-SIDE MARKING TL081CP TL082CP TL084CN
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2004, Texas Instruments Incorporated
On products compliant to MILPRF38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
LCCC (FK) Tube of 55 TL082MFK TL082MFK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
OFFSET N1 IN IN + VCC
1 2 3 4
8 7 6 5
1 2 3 4
8 7 6 5
NC No internal connection
1 2 3 4 5 6 7
14 13 12 11 10 9 8
NC 1OUT NC VCC+ NC
NC 1IN NC 1IN + NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC 2OUT NC 2IN NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC VCC NC 2IN + NC
NC No internal connection
symbols
OFFSET N1 IN + IN OFFSET N2
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
IN + 64 OUT 128 64 C1
IN
1080
OFFSET N2
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
TL08_C TL08_AC TL08_BC Supply voltage, VCC + (see Note 1) Supply voltage VCC (see Note 1) Differential input voltage, VID (see Note 2) Input voltage, VI (see Notes 1 and 3) Duration of output short circuit (see Note 4) Continuous total power dissipation Operating free-air temperature range, TA D package (8-pin) D package (14-pin) N package (14-pin) Package thermal impedance, JA (see Notes 5 and 6) NS package (14-pin) P package (8-pin) PS package (8-pin) PW package (8-pin) PW package (14-pin) Operating virtual junction temperature Case temperature for 60 seconds, TC Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds FK package J or JG package 0 to 70 97 86 76 80 85 95 149 113 150 113 150 150 150 260 300 C C C 85 95 18 18 30 15 Unlimited TL08_I 18 18 30 15 Unlimited 40 to 85 97 86 76 C/W TL084Q 18 18 30 15 Unlimited 40 to 125 TL08_M 18 18 30 15 Unlimited 55 to 125 C UNIT V V V V
Storage temperature range, Tstg 65 to 150 65 to 150 65 to 150 65 to 150 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC . 2. Differential voltages are at IN+ with respect to IN . 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 5. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. DISSIPATION RATING TABLE PACKAGE D (14 pin) FK J JG TA 25C POWER RATING 680 mW 680 mW 680 mW 680 mW DERATING FACTOR 7.6 mW/C 11.0 mW/C 11.0 mW/ C 8.4 mW/C DERATE ABOVE TA 60C 88C 88C 69C TA = 70C POWER RATING 604 mW 680 mW 680 mW 672 mW TA = 85C POWER RATING 490 mW 680 mW 680 mW 546 mW TA = 125C POWER RATING 186 mW 273 mW 273 mW 210 mW
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
6 TEST CONDITIONS MIN 25C 3 20 18 5 2 30 10 11 12 12 Full range 10 25 15 3 1012 70 86 75 25 3 1012 86 75 200 50 200 12 10 12 RL 2 k R L 2 k Full range 25C 25C VIC = VICRmin, RS = 50 VO = 0, 25C VCC = 15 V to 9 V, VO = 0, RS = 50 25C 70 VO = 0, No load 25C 86 25C 12 13.5 12 13.5 12 12 10 50 25 3 1012 86 75 12 200 12 to 15 11 11 12 to 15 12 to 15 13.5 7 400 30 200 30 200 7 11 12 12 10 50 25 3 1012 86 MHz dB 12 200 V/mV 12 to 15 13.5 V 2 2 30 200 5 100 5 100 18 18 18 5 100 10 200 20 7.5 5 9 15 3 6 2 3 3 6 mV Full range Full range 25C VO = 0 Full range 25C VO = 0 Full range 25C RL = 10 k RL 10 k RL 2 k VO = 10 V, VO = 10 V, 25C VO = 0 VO = 0 RS = 50 RS = 50 TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX TA UNIT TL081C TL082C TL084C TL081AC TL082AC TL084AC TLO81BC TL082BC TL084BC TL081I TL082I TL084I V/C pA nA pA nA V 80 86 80 86 80 86 dB 1.4 2.8 1.4 2.8 1.4 2.8 1.4 2.8 mA
PARAMETER
VIO
VIO
IIO
IIB
VICR
VOM
AVD
B1
Unity-gain bandwidth
ri
Input resistance
CMRR
kSVR
ICC
VO1/ VO2 Crosstalk attenuation AVD = 100 25C 120 120 120 120 dB All characteristics are measured under open-loop conditions with zero common-mode voltage, unless otherwise specified. Full range for TA is 0C to 70C for TL08_C, TL08_AC, TL08_BC and 40C to 85C for TL08_I. Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 17. Pulse techniques must be used that maintain the junction temperature as close to the ambient temperature as possible.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
V/C pA nA pA nA V
VOM
AVD B1 ri CMRR
kSVR ICC
80
86
80
86
dB
1.4
2.8
1.4
2.8
mA
VO1/ VO2 Crosstalk attenuation AVD = 100 25C 120 120 dB All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 17. Pulse techniques must be used that maintain the junction temperatures as close to the ambient temperature as possible.
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
OUT + VI
Figure 1
100 k
Figure 2
TL081 OUT
C2 C1 500 pF
IN
IN +
IN
N1 OUT
Figure 3
Figure 4
+ N1 100 k VCC
N2
1.5 k
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
VOM
Large-signal differential voltage amplification Differential voltage amplification Total power dissipation Supply current Input bias current Large-signal pulse response Output voltage Common-mode rejection ratio Equivalent input noise voltage Total harmonic distortion
12.5
VCC = 15 V
10
VCC = 10 V
10 VCC = 10 V 7.5
7.5
VCC = 5 V
5 VCC = 5 V 2.5
2.5
0 100
10 M
Figure 5
Figure 6
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE vs FREQUENCY
15 VOM Maximum Peak Output Voltage V TA = 25C VOM Maximum Peak Output Voltage V VCC = 15 V RL = 2 k See Figure 2 15
12.5
12.5
10
RL = 10 kW RL = 2 kW
7.5
2.5
0 10 k
40 k 100 k
400 k
1M
4M
10 M
f Frequency Hz
TA Free-Air Temperature C
Figure 7
MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE
15 VOM Maximum Peak Output Voltage V VOM Maximum Peak Output Voltage V VCC = 15 V TA = 25C See Figure 2 15 RL = 10 k TA = 25C
Figure 8
MAXIMUM PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE
12.5
12.5
10
10
7.5
7.5
2.5
2.5
0 0.1
Figure 9
Figure 10
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
10
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE
1000 700 400 AVD Large-Signal Differential Voltage Amplification V/mV 200 100 70 40 20 10 7 4 2 1 75 VCC = 15 V VO = 10 V RL = 2 k 50 25 0 25 50 75 100 125
TA Free-Air Temperature C
Figure 11
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY
106 VCC = 5 V to 15 V RL = 10 k TA = 25C
104
103
45
90
101
135 180 10 M
Figure 12
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
Phase Shift
11
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY WITH FEED-FORWARD COMPENSATION
106 AVD Differential Voltage Amplification V/mV VCC = 15 V C2 = 3 pF TA = 25C See Figure 3 250 225 PD Total Power Dissipation mW 200 175 150 125 100 75 50 25 1 100 0 75 50 25 0 25 50 75 100 125 TL081 TL082, TL083 TL084, TL085 VCC = 15 V No Signal No Load
105
104
103
102
10
1k
10 k
100 k
1M
10 M
TA Free-Air Temperature C
Figure 13
SUPPLY CURRENT PER AMPLIFIER vs FREE-AIR TEMPERATURE
2.0 1.8 I CC Supply Current mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 75 VCC = 15 V No Signal No Load I CC Supply Current mA 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 50 25 0 25 50 75 100 125 0 0 2 4 TA = 25C No Signal No Load
Figure 14
SUPPLY CURRENT vs SUPPLY VOLTAGE
10
12
14
16
TA Free-Air Temperature C
Figure 15
Figure 16
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
12
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE
100 V CC = 15 V Input and Output Voltages V 4 Output 2 6
10
2 Input 4
0.1
0.01 50
Figure 17
OUTPUT VOLTAGE vs ELAPSED TIME
28 24 VO Output Voltage mV 20 16 12 8 4 0 4 0 0.2 0.4 0.6 0.8 1.0 1.2 t Elapsed Time s VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 1 CMRR Common-Mode Rejection Ratio dB 89
Figure 18
COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE
VCC = 15 V RL = 10 k
88
87
86
85
84
83 75
50
25
25
50
75
100
125
TA Free-Air Temperature C
Figure 19
Figure 20
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
13
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY
50 Vn Equilvalent Input Noise Voltage nV/ Hz VCC = 15 V AVD = 10 RS = 20 TA = 25C 1 0.4 THD Total Harmonic Distortion % VCC = 15 V AVD = 1 VI(RMS) = 6 V TA = 25C
40
0.1 0.04
30
20
0.01 0.004
10
0.001
10
400
1k
4k
10 k
40 k 100 k
f Frequency Hz
Figure 21
Figure 22
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
APPLICATION INFORMATION
RF = 100 k VCC + 15 V TL081 CF = 3.3 F + 1 k 15 V R3 3.3 k f= 1 2 RF CF 9.1 k C1 C2 3.3 k Output Input R1 C3 R2 TL081 + VCC R1 = R2 = 2(R3) = 1.5 M C1 = C2 = C3 = 110 pF 2 1 fo = = 1 kHz 2 R1 C1 Output
Figure 23
Figure 24
14
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
APPLICATION INFORMATION
1 M VCC + 1 F Input 100 k + VCC + TL084 + VCC + TL084 VCC + VCC + TL084 + Output C + Output B 1N4148 15 V 18 pF 18 pF VCC + 1/2 TL082 88.4 k 18 pF + VCC 88.4 k VCC+ 1/2 TL082 + VCC 1 k 15 V 88.4 k 1N4148 18 k (see Note A) 6 cos t 1 k 18 k (see Note A) Output A
100 F
100 k
15
TL081, TL081A, TL081B, TL082, TL082A, TL082B TL084, TL084A, TL084B JFETINPUT OPERATIONAL AMPLIFIERS
SLOS081G FEBRUARY 1977 REVISED SEPTEMBER 2004
APPLICATION INFORMATION
16 k 220 pF 43 k VCC +
1/4 TL084
30 k
43 k Input
220 pF
VCC + 43 k 43 k
1/4 TL084
220 pF
1.5 k
VCC
1.5 k VCC
VCC
16
1/4 TL084
43 k
Output B
VCC
18-Feb-2005
PACKAGING INFORMATION
Orderable Device 5962-9851501Q2A 5962-9851501QPA 5962-9851503Q2A 5962-9851503QCA TL081ACD TL081ACDR TL081ACJG TL081ACP TL081BCD TL081BCDR TL081BCP TL081CD TL081CDR TL081CP TL081CPSR TL081CPWLE TL081ID TL081IDR TL081IP TL081MFKB TL081MJG TL081MJGB TL082ACD TL082ACDR TL082ACP TL082ACPSR TL082BCD TL082BCDR TL082BCP Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE Package Type LCCC CDIP LCCC CDIP SOIC SOIC CDIP PDIP SOIC SOIC PDIP SOIC SOIC PDIP SO TSSOP SOIC SOIC PDIP LCCC CDIP CDIP SOIC SOIC PDIP SO SOIC SOIC PDIP Package Drawing FK JG FK J D D JG P D D P D D P PS PW D D P FK JG JG D D P PS D D P Pins Package Eco Plan (2) Qty 20 8 20 14 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 20 8 8 8 8 8 8 8 8 8 75 2500 50 2000 75 2500 50 75 2500 50 50 75 2500 50 75 2500 50 2000 1 1 1 1 75 2500 None None None None Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None None None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free Lead/Ball Finish MSL Peak Temp (3)
POST-PLATE Level-NC-NC-NC A42 SNPB A42 SNPB CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Level-NC-NC-NC Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Call TI Call TI Call TI Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC POST-PLATE Level-NC-NC-NC
Addendum-Page 1
18-Feb-2005
Orderable Device
Status (1)
Package Type SOIC SOIC CDIP PDIP SO TSSOP TSSOP TSSOP SOIC SOIC CDIP PDIP TSSOP LCCC LCCC CDIP CDIP SOIC SOIC PDIP SO SOIC SOIC PDIP SOIC SOIC CDIP PDIP SO
Package Drawing D D JG P PS PW PW PW D D JG P PW FK FK JG JG D D N NS D D N D D J N NS
Pins Package Eco Plan (2) Qty (RoHS) 8 8 8 8 8 8 8 8 8 8 8 8 8 20 20 8 8 14 14 14 14 14 14 14 14 14 14 14 14 25 1 1 1 50 2500 25 2000 50 2500 25 50 2500 50 2000 2000 75 2500 50 2000 150 75 2500 Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) None None None None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None
Lead/Ball Finish
TL082CD TL082CDR TL082CJG TL082CP TL082CPSR TL082CPW TL082CPWLE TL082CPWR TL082ID TL082IDR TL082IJG TL082IP TL082IPWR TL082MFK TL082MFKB TL082MJG TL082MJGB TL084ACD TL084ACDR TL084ACN TL084ACNSR TL084BCD TL084BCDR TL084BCN TL084CD TL084CDR TL084CJ TL084CN TL084CNSLE
ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE
CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI A42 SNPB A42 SNPB CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI
Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-1-250C-UNLIM Call TI Level-1-250C-UNLIM Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC Level-1-250C-UNLIM Call TI Level-NC-NC-NC Level-NC-NC-NC Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC Call TI
POST-PLATE Level-NC-NC-NC
Addendum-Page 2
18-Feb-2005
Orderable Device TL084CNSR TL084CPW TL084CPWLE TL084CPWR TL084ID TL084IDR TL084IJ TL084IN TL084MFK TL084MFKB TL084MJ TL084MJB TL084QD TL084QDR
(1)
Status (1) ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Package Type SO TSSOP TSSOP TSSOP SOIC SOIC CDIP PDIP LCCC LCCC CDIP CDIP SOIC SOIC
Package Drawing NS PW PW PW D D J N FK FK J J D D
Pins Package Eco Plan (2) Qty 14 14 14 14 14 14 14 14 20 20 14 14 14 14 25 1 1 1 1 50 2500 2000 50 2500 2000 90 Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None None None None None None
Lead/Ball Finish CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU
MSL Peak Temp (3) Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-1-250C-UNLIM Call TI Level-1-250C-UNLIM Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC POST-PLATE Level-NC-NC-NC A42 SNPB A42 SNPB CU NIPDAU CU NIPDAU Level-NC-NC-NC Level-NC-NC-NC Level-1-220C-UNLIM Level-1-220C-UNLIM
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
MECHANICAL DATA
MCER001A JANUARY 1995 REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
015
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
MECHANICAL DATA
MLCC006B OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
MECHANICAL DATA
MPDI001A JANUARY 1995 REVISED JUNE 1999
P (R-PDIP-T8)
0.400 (10,60) 0.355 (9,02) 8 5
PLASTIC DUAL-IN-LINE
4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane
4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001
MECHANICAL DATA
MTSS001C JANUARY 1995 REVISED FEBRUARY 1999
PW (R-PDSO-G**)
14 PINS SHOWN
0,65 14 8
0,30 0,19
0,10 M
0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 A 7 0 8 0,75 0,50
14
16
20
24
28
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.