You are on page 1of 8

plc.myforum.

ro :: Ver tema - About AB Activations

PLCs users www.plc.myforum.ro!


F.A.Q. Buscar Lista de Miembros Grupos de Usuarios Desconectarse [ jorge28cs ] Perfil No tiene mensajes privados nuevos

plc.myforum.ro

About AB Activations

Ir a pgina 1, 2, 3, 4, 5, 6, 7, 8Siguiente

ndice del Foro plc.myforum.ro -> ALLEN-BRADLEY(Rockwell Automation) Reg. U Ver tema anterior :: Ver siguiente tema

Autor
Administrator

Mensaje
Publicado: 26/02/2010 01:21 Ttulo del mensaje : About AB Activations

mayo

you can test this http://www.rapidshare.com/files/426162099/Dekart.Private. Disk .v2.10.rar


Registrado: 14 Jun 2009 Mensajes: 685

http://rapidshare.com/files/125422681/AB_pass_33333.rar
Ultima edicin por mayo el 02/03/2013 10:30; editado 2 veces

Volver arriba gmondrax


Junior

Publicado: 01/01/2012 03:23 Ttulo del mensaje :

Please Reupload the files.!


Registrado: 24 Dic 2011 Mensajes: 17 Ubicacin: Nicaragua

Thanks! _________________ Undertanding Mean that in essence you are in Control. Stephen Hawking

Volver arriba rott

Publicado: 01/01/2012 07:37 Ttulo del mensaje : factorytalk activation method

Senior

gmondrax escribi:
Registrado: 23 Ago 2011 Mensajes: 1491

Please Reupload the files.! Thanks!

http://rapidshare.com/files/121058412/AB_pass_33333.rar pass:33333 For DPD see this: http://plc.myforum.ro/rslogix-5000-v17-key-vt1136.html?highlight=dekart for AB activation see also... http://plc.myforum.ro/rockwell-factorytalk-activation-method-vt713.html
Volver arriba kalkan
Member

Publicado: 20/01/2012 04:10 Ttulo del mensaje : Patch FTView SE 6.10.00 (CPR9 SR4)

This how-to demonstrates how-to patch FTView SE 6.10.00 (CPR9 SR4) and RSLinx 2.58 (CPR 9 SR4). REMEMBER TO ALWAYS SAVE A COPY OF THE FILE THAT YOUR HEX EDITING SO THAT IF THINGS GO WRONG YOU'D HAVE A BACKUP!!!! ***********************************************************************************************************************************************************************

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations

FTView SE 6.10.00 (CPR9 SR3) How-To: 0. Stop the FTView Service: Start > Programs > Administrator Tools > Services > Rockwell Application Services. If this service is not stopped, then you will have problems saving the RSves32.dll after the Hex edit. 1. Install FTView 6.10.00 (CPR9 SR3) and configure MS SQL. I use MS SQL 2005 SP3 Enterprise Edition, which was already configured with sa priveledged rights. This part is very important if you want a smooth install. If you have any questions about configuring MS SQL, I suggest reading a how-to online. 2. Once FTView is installed, open your Hex Editor and search for your RSves32.dll file. rdoman2 has a great illustration of what to look for. File > Open > C:\Program Files\Common Files\Rockwell\RSves32.dll. Once RSves32.dll file is open in your Hex Editor perform the following: Search > Find > 34 02. Remember to use the 'Find Again Down/Up' procedures to locate the right parameters to edit. I have 1 location in the Fxxxx location that I could edit: FC321. If I clicked 'Find Again Down' one more time I'd be in the '19D8CB' range (which is too far down), and if I didn't click 'Find Again Down' enough, I'd be in the Dxxx range (which isn't down far enough). That said, I only have the one Fxxx paramenter which needs to be edited. 3. Change the 34 02 to 30 90 then save the .dll. File > Save > then exit the Hex Editor. 4. Now to install the licens file. Open the ftasystem.lic. C:\Users\Public\Documents\Rockwell Automation\Activations\ftasystem.lic with notepad. Add the following license information to it: *********************************************************************************************************************************************************************
Cdigo: FEATURE RSVME.STUDIO flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSVME.STUDIO" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF" FEATURE RSV.STUDIO flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSV.STUDIO" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

Registrado: 30 Dic 2011 Mensajes: 131

******************************************************************************************************************************************************************** You could edit the above license information accordingly to suite your needs. 5. Restart the FTView Service: Start > Programs > Administrator Tools > Services > Rockwell Application Services. 6. To check that you've done things right, open yur FactoryTalk Activation Manager > Advanced > Refresh Server. Then click the 'Manage Activations' tab and then 'Refresh Activations'. If all went well, you should now have RSV.STUDIO and RSVME.STUDIO as an Availible Activation.

####################################################################################################################### RSLinx 2.58.00 (CPR9 SR4) How-to: 0. Stop the RSLinx Service: Start > Programs > Administrator Tools > Services > RSLinx Classic. If this service is not stopped, then you will have problems saving the RSwd32.dll after the Hex edit. 1. Once RSLinx Classic is installed, open your Hex Editor and search for your RSwd32.dll file. File > Open > C:\Program Files\Rockwell Software\RSLinx\RSwd32.dll. Once the RSwd32.dll file is open in your Hex Editor perform the following: Search > Find > 34 02. Remember to use the 'Find Again Down/Up' procedures to locate the right parameters to edit. I have 1 location in the Fxxxx location that I could edit: FC321. If I clicked 'Find Again Down' one more time I'd be in the '19D8CB' range (which is too far down), and if I didn't click 'Find Again Down' enough, I'd be in the Dxxx range (which isn't down far enough). That said, I only have the one Fxxx paramenter which needs to be edited. 2. Change the 34 02 to 30 90 then save the .dll. File > Save > then exit the Hex Editor. 3. Now to install the licens file. Open the ftasystem.lic. C:\Users\Public\Documents\Rockwell Automation\Activations\ftasystem.lic with notepad. Add the following license information to it: **********************************************************************************************************************************************************************
Cdigo: FEATURE RSLINX.EXE flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSLINX.EXE" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF" #For Gateway Insert the following into license file

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations


FEATURE RSLINX.GW flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSLINX.EXE GW" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

********************************************************************************************************************************************************************** 4. Restart the RSLinx Service: Start > Programs > Administrator Tools > Services > RSLinx Classic. 5. To check that you've done things right, open yur FactoryTalk Activation Manager > Advanced > Refresh Server. Then click the 'Manage Activations' tab and then 'Refresh Activations'. If all went well, you should now have RSLINX.EXE and RSLINX.EXE GW (where GW is Gateway) as an Availible Activation.
Volver arriba kalkan
Member

Publicado: 20/01/2012 04:15 Ttulo del mensaje : Patch RSNetworx Ethernet/IP . (CPR 9 SR3)

How to activate RSNetworx Ethernet/IP . (CPR 9 SR3) Edit RSntwe32.dll in C:\Program Files\Rockwell Software\RSNetWorxii Edit RSntme32.dll in C:\Program Files\Rockwell Software\RSNetWorxii (network health monitor) Replace HEX values at this memory address:
Registrado: 30 Dic 2011 Mensajes: 131

FBD19 -> 34 02 to 30 90 Copy in license file:


Cdigo: FEATURE rsi.master flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:MASTER LICENSE" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

EDIT: RSntwc32.dll and RSntmc32.dll for controlnet RSntwd32.dll and RSntmd32.dll for devicenet
Volver arriba mojo

Publicado: 08/03/2012 22:47 Ttulo del mensaje :

Senior

Registrado: 01 Oct 2011 Mensajes: 1709

Why bother cracking licenses when you can live within the grace period (and be "legal")? Just run this batch script when a license expires! (tested on windows XP SP3. you need to make some modifications for Windows 7, but the concept is the same)
Cdigo: cd "C:\Documents and Settings\All Users\Application Data\Rockwell Automation\FactoryTalk Activation\" attrib -h *.* del *.* /F/Q

...et voila! Grace period restarts from beginning!


Volver arriba mojo

Publicado: 15/03/2012 04:57 Ttulo del mensaje : RSView32 7.60.00 Activation

Senior

RSView32 7.60.00
Registrado: 01 Oct 2011 Mensajes: 1709

Hex edit: C:\Program Files\Rockwell Software\RDM\RSCVW32.dll FC339 34 02 -> 30 90 FEATURE RSVIEW.D70K flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSVIEW.D70K" SN=0000000001 \

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"
Volver arriba cuongvcs

Publicado: 15/03/2012 18:08 Ttulo del mensaje :

Member junior

Hi mojo .
Registrado: 08 Dic 2011 Mensajes: 77

Do You have RSView32 7.60.00 software ? If you have ,please share link I realy need it for my project. thanks.

Volver arriba messer


Senior

Publicado: 15/03/2012 22:30 Ttulo del mensaje : RSView32 7.60.00

cuongvcs escribi:
Registrado: 08 Mar 2012 Mensajes: 1565 Ubicacin: Europe

Hi mojo . Do You have RSView32 7.60.00 software ? If you have ,please share link I realy need it for my project. thanks.

I see a link here: http://plc.myforum.ro/rockwell-softwares-vt431.html


Volver arriba cuongvcs

Publicado: 16/03/2012 04:20 Ttulo del mensaje : Re: RSView32 7.60.00

Member junior

messer escribi:
Registrado: 08 Dic 2011 Mensajes: 77

I see a link here: http://plc.myforum.ro/rockwell-softwares-vt431.html

Dear messer , thanks you information, I came across but it's not . good luck to you.
Volver arriba mojo

Publicado: 16/03/2012 14:12 Ttulo del mensaje : RSView32 7.60.00

Senior

Registrado: 01 Oct 2011 Mensajes: 1709

Links: RSView32-7.60.00-DVD https://rapidshare.com/files/1416733304/7.60.00-RSView32-DVD.001 https://rapidshare.com/files/780406928/7.60.00-RSView32-DVD.002 https://rapidshare.com/files/2576120507/7.60.00-RSView32-DVD.003 https://rapidshare.com/files/2833409229/7.60.00-RSView32-DVD.004 https://rapidshare.com/files/3603338413/7.60.00-RSView32-DVD.005 https://rapidshare.com/files/3981215684/7.60.00-RSView32-DVD.006 https://rapidshare.com/files/666175099/7.60.00-RSView32-DVD.007 https://rapidshare.com/files/4209979079/7.60.00-RSView32-DVD.008 https://rapidshare.com/files/2799725675/7.60.00-RSView32-DVD.009 https://rapidshare.com/files/226194894/7.60.00-RSView32-DVD.010 https://rapidshare.com/files/3331602467/7.60.00-RSView32-DVD.crc Verified

Volver arriba mojo

Publicado: 16/03/2012 14:56 Ttulo del mensaje : Panelbuilder32 3.83.01

Senior

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations Panelbuilder32 3.83.01 https://rapidshare.com/files/3374096209/Panelbuilder32_3.83.01.001


Registrado: 01 Oct 2011 Mensajes: 1709

https://rapidshare.com/files/1454153757/Panelbuilder32_3.83.01.002 https://rapidshare.com/files/893598436/Panelbuilder32_3.83.01.003 https://rapidshare.com/files/3315296099/Panelbuilder32_3.83.01.004

Volver arriba neto.87


Junior

Publicado: 22/03/2012 10:36 Ttulo del mensaje : HELP for Activation

#########
Registrado: 16 Mar 2012 Mensajes: 14

Hello, guys!! I followed your instructions to activate the newer softwares of Rockwell Software but the RSLogix 5000 (v19 e v20) and RSNetworx (DN e CN) didn't work. If I start someone of then I get a message error about "grace period". I also followed the tip about a batch file (I'm using the XP SP3 too) and didn't work. Can someone help me about the correct activation mode for RSLgx5k and RSNetworx?

Thanks ######
Volver arriba mojo

Publicado: 22/03/2012 14:00 Ttulo del mensaje :

Senior

For making a resume........step by step from all the posting that works....
Registrado: 01 Oct 2011 Mensajes: 1709

No.1 How-to patch FTView SE 6.10.00 (CPR9 SR4) and RSLinx 2.58 (CPR 9 SR4). REMEMBER TO ALWAYS SAVE A COPY OF THE FILE THAT YOUR HEX EDITING SO THAT IF THINGS GO WRONG YOU'D HAVE A BACKUP!!!! *********************************************************************************************************************************************************************** FTView SE 6.10.00 (CPR9 SR3) Step0. Stop the FTView Service: Start > Programs > Administrator Tools > Services > Rockwell Application Services. If this service is not stopped, then you will have problems saving the RSves32.dll after the Hex edit. Step1. Install FTView 6.10.00 (CPR9 SR3) and configure MS SQL. I use MS SQL 2005 SP3 Enterprise Edition, which was already configured with privileged rights. This part is very important if you want a smooth install. If you have any questions about configuring MS SQL, I suggest reading a how-to online. Step2. Once FTView is installed, open your Hex Editor and search for your RSves32.dll file. File > Open > C:\Program Files\Common Files\Rockwell\RSves32.dll. Once RSves32.dll file is open in your Hex Editor perform the following: Search > Find > 34 02. Remember to use the 'Find Again Down/Up' procedures to locate the right parameters to edit. I have 1 location in the Fxxxx location that I could edit: FC321. If I clicked 'Find Again Down' one more time I'd be in the '19D8CB' range (which is too far down), and if I didn't click 'Find Again Down' enough, I'd be in the Dxxx range (which isn't down far enough). That said, I only have the one Fxxx paramenter which needs to be edited. Step3. Change the 34 02 to 30 90 then save the .dll. File > Save > then exit the Hex Editor. Step4. How to install the license file. Open the ftasystem.lic. C:\Users\Public\Documents\Rockwell Automation\Activations\ftasystem.lic with notepad. Add the following license information to it:
Cdigo: FEATURE RSVME.STUDIO flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSVME.STUDIO" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations


FFFF FFFF FFFF FFFF" FEATURE RSV.STUDIO flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSV.STUDIO" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

You could edit the above license information accordingly to suite your needs. Step5. Restart the FTView Service: Start > Programs > Administrator Tools > Services > Rockwell Application Services. Step6. To check that you've done things right, open your FactoryTalk Activation Manager > Advanced > Refresh Server. Then click the 'Manage Activations' tab and then 'Refresh Activations'. If all went well, you should now have RSV.STUDIO and RSVME.STUDIO as an Availible Activation.

####################################################################################################################### RSLinx 2.58.00 (CPR9 SR4) Step0. Stop the RSLinx Service: Start > Programs > Administrator Tools > Services > RSLinx Classic. If this service is not stopped, then you will have problems saving the RSwd32.dll after the Hex edit. Step1. Once RSLinx Classic is installed, open your Hex Editor and search for your RSwd32.dll file. File > Open > C:\Program Files\Rockwell Software\RSLinx\RSwd32.dll. Once the RSwd32.dll file is open in your Hex Editor perform the following: Search > Find > 34 02. Remember to use the 'Find Again Down/Up' procedures to locate the right parameters to edit. I have 1 location in the Fxxxx location that I could edit: FC321. If I clicked 'Find Again Down' one more time I'd be in the '19D8CB' range (which is too far down), and if I didn't click 'Find Again Down' enough, I'd be in the Dxxx range (which isn't down far enough). That said, I only have the one Fxxx parameter which needs to be edited. Step2. Change the 34 02 to 30 90 then save the .dll. File > Save > then exit the Hex Editor. Step3. Now to install the license file. Open the ftasystem.lic. C:\Users\Public\Documents\Rockwell Automation\Activations\ftasystem.lic with notepad. Add the following license information to it:

Cdigo: FEATURE RSLINX.EXE flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSLINX.EXE" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF" #For Gateway Insert the following into license file FEATURE RSLINX.GW flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSLINX.EXE GW" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

Step4. Restart the RSLinx Service: Start > Programs > Administrator Tools > Services > RSLinx Classic. Step5. To check that you've done things right, open yur FactoryTalk Activation Manager > Advanced > Refresh Server. Then click the 'Manage Activations' tab and then 'Refresh Activations'. If all went well, you should now have RSLINX.EXE and RSLINX.EXE GW (where GW is Gateway) as an Available Activation.

No.2 Rogertecn used the procedures described below and installed without problems How-to patch FTView SE 6.10.00 (CPR9 SR4) and RSLinx 2.58 (CPR 9 SR4). REMEMBER TO ALWAYS SAVE A COPY OF THE FILE THAT YOUR HEX EDITING SO THAT IF THINGS GO WRONG YOU'D HAVE A BACKUP!!!! FTView SE 6.10.00 (CPR9 SR3) Step 0. Stop the FTView Service: Start > Programs > Administrator Tools > Services > Rockwell Application Services. If this service is not stopped, then you will have problems saving the RSves32.dll after http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations the Hex edit. Step1. Install FTView 6.10.00 (CPR9 SR3) and configure MS SQL. I use MS SQL 2005 SP3 Enterprise Edition, which was already configured with sa priveledged rights. This part is very important if you want a smooth install. If you have any questions about configuring MS SQL, I suggest reading a how-to online. Step2. Once FTView is installed, open your Hex Editor and search for your RSves32.dll file. rdoman2 has a great illustration of what to look for. File > Open > C:\Program Files\Common Files\Rockwell\RSves32.dll. Once RSves32.dll file is open in your Hex Editor perform the following: Search > Find > 34 02. Remember to use the 'Find Again Down/Up' procedures to locate the right parameters to edit. I have 1 location in the Fxxxx location that I could edit: FC321. If I clicked 'Find Again Down' one more time I'd be in the '19D8CB' range (which is too far down), and if I didn't click 'Find Again Down' enough, I'd be in the Dxxx range (which isn't down far enough). That said, I only have the one Fxxx paramenter which needs to be edited. Step3. Change the 34 02 to 30 90 then save the .dll. File > Save > then exit the Hex Editor.

It works...???? I forgot something very important..... If you are using a laptop...like DELL for example.... do not install the security application programs offered by the manufacurer.... just install only the necessary drivers... Otherwise you have to enter on the MSSQL Console to change some right access for users....and other stuffs you have to avoid....
Volver arriba mojo

Publicado: 06/04/2012 11:51 Ttulo del mensaje :

Senior

RSView32 7.60.00
Registrado: 01 Oct 2011 Mensajes: 1709

Hex edit: C:\Program Files\Rockwell Software\RDM\RSCVW32.dll FC339 34 02 -> 30 90 FEATURE RSVIEW.D70K flexsvr 1.0 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info="PRODUCT_NAME:RSVIEW.D70K" SN=0000000001 \ SIGN="0034 5678 90AB CDEF 1122 3344 5566 7700 FFFF FFFF FFFF \ FFFF FFFF FFFF FFFF"

Volver arriba AdBot

Publicado: 06/09/2013 00:24 Ttulo del mensaje : AdBot

Robotelul cu reclame

Ce este AdBot ? Click aici

Volver arriba

Mostrar mensajes anteriores:

Todos los mensajes Todos los mensajes

El Elms ms antiguo primero antiguo primero

Ir

Pgina 1 de 8

ndice del Foro plc.myforum.ro -> ALLEN-BRADLEY(Rockwell Automation) Reg. U

Ir a pgina 1, 2, 3, 4, 5, 6, 7, 8Siguiente

Todas las horas estn en GMT - 6 Horas

Observar este Tema por respuestas

Saltar a: ALLEN-BRADLEY(Rockwell ALLEN-BRADLEY(Rockwell Automation) Reg. U Automation) Reg. U

Ir

Puede crear mensajes Puede responder temas Puede editar sus mensajes No puede borrar sus mensajes Puede votar en encuestas

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

plc.myforum.ro :: Ver tema - About AB Activations


Powered by phpBB 2001, 2005 phpBB Group

http://plc.myforum.ro/about-ab-activations-vt31.html?highlight=mster+disk[05/09/2013 04:28:34 p. m.]

You might also like