Professional Documents
Culture Documents
Topic
Avamar Software Download Links
Selections
Select Software Option for Download Links: 6.1.0.402
REPORT PROBLEMS
If you find any errors in this procedure or have comments regarding this application, send email to
SolVeFeedback@emc.com
EMC CONFIDENTIAL
version: 1.5.0
1 of 7
Contents
Obtaining Required Software Files.....................................................................................4
Download Links for Avamar 6.1 Installation on RHEL systems............................................................4
Download Links for Avamar 6.1 Installation on SLES systems............................................................4
Download Links for 6.1 Maintenance Workflows..................................................................................4
This workflow is no longer supported as of March 6th, 2013. Please use the manual add node
procedure for Avamar 6.1 currently available in Avamar Procedure Generator version 1.4.4 and
higher. 4
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av1855134760/maintenanceWF/ReplaceStora
geNode-6.48-0.0.avp ............................................................................................................................. 4
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av1855134760/maintenanceWF/ReplaceStora
geNode-6.48-0.0.avp.md5sum............................................................................................................... 5
Download Links for Avamar 6.1 Optional Workflows............................................................................5
ftp://avamar_ftp:anonymous@ftp.avamar.com/autoupdate/EMCRepository/fAxev2TU88Nu6H/Upgrade
ClientDownloads-6.1.0-402.avp............................................................................................................. 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/autoupdate/EMCRepository/fAxev2TU88Nu6H/Upgrade
ClientDownloads-6.1.0-402.avp.md5sum............................................................................................... 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/autoupdate/EMCRepository/fAxev2TU88Nu6H/InstallAv
fs-6.1.0-402.avp..................................................................................................................................... 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/autoupdate/EMCRepository/fAxev2TU88Nu6H/InstallAv
fs-6.1.0-402.avp.md5sum....................................................................................................................... 5
Download Links for Avamar 6.1 AVE Software....................................................................................5
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av896803039/AVE6.1.0.402/EMC_Avamar_Vi
rtual_Edition_OVF10.ovf........................................................................................................................ 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av896803039/AVE6.1.0.402/EMC_Avamar_Vi
rtual_Edition_OVF10.ovf.md5sum.......................................................................................................... 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av896803039/AVE6.1.0.402/system.vmdk...5
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av896803039/AVE6.1.0.402/system.vmdk.md
5sum
5
Download Links for Avamar 6.1 Client Only ........................................................................................ 5
ftp://avamar_ftp:anonymous@ftp.avamar.com/software/av896803039/v6.1.100.402-client.tar.gz.......5
EMC CONFIDENTIAL
version: 1.5.0
2 of 7
The above command is to be entered all on one line with no carriage return.....................6
Note:
.b
.c
1. [ ]
Download the required software to your laptop using the download links in the previous
section......................................................................................................................................................... 6
2. [ ]
On your service laptop with the Avamar Procedure Generator installed, Click Start Run
and type cmd on the command line then click OK.......................................................................................6
Figure 1
Command....................................................................................................................... 7
3. [ ]
In the DOS box that opens, change directory location to the directory where the PG is
located. By default, the EMC Avamar Procedure Generator installation location is as follows:
C:\AvamarProcedureGenerator................................................................................................................... 7
Note:
If the Procedure Generator is installed to a location other than the default, adjust your path
accordingly.................................................................................................................................................. 7
4. [ ]
Copy and paste the following command to your DOS window to prevent errors in syntax: 7
5. [ ]
Using pscp to copy files onto the Avamar Utility node by typing the following command:...7
IMPORTANT:
All .AVP (workflow) files should use PATH of /data01/avamar/repo/packages. All
other files should use PATH of /data01/avamar/src/. .................................................................................7
EMC CONFIDENTIAL
version: 1.5.0
3 of 7
version: 1.5.0
4 of 7
EMC CONFIDENTIAL
version: 1.5.0
5 of 7
105k
% Received % Xferd
100
105k
Average Speed
Time
Time
Time Current
Dload Upload
Total
Spent
Left Speed
854k
0 --:--:-- --:--:-- --:--:-- 3196k
Download the required software to your laptop using the download links in the previous
2. [ ]
On your service laptop with the Avamar Procedure Generator installed, Click Start Run
and type cmd on the command line then click OK.
Example:
EMC CONFIDENTIAL
version: 1.5.0
6 of 7
Figure 1
Command
3. [ ]
In the DOS box that opens, change directory location to the directory where the PG is
located. By default, the EMC Avamar Procedure Generator installation location is as follows:
C:\AvamarProcedureGenerator
Note: If the Procedure Generator is installed to a location other than the default, adjust your path
accordingly.
4. [ ]
Copy and paste the following command to your DOS window to prevent errors in syntax:
cd c:\AvamarProcedureGenerator\Repository\Tools
Example:
cd c:\AvamarProcedureGenerator\Repository\Tools
C:\AvamarProcedureGenerator\Repository\Tools>
5. [ ]
Using pscp to copy files onto the Avamar Utility node by typing the following command:
Where:
PASSWORD = the root password of the Avamar Server
LOCAL_FILENAME = the absolute path of the file on you laptop (for example C:\myfiles\filename)
IP_ADDRESS = the IP address of the Utility Node or Single Node Server
PATH = the directory on the Avamar Server to copy the file to.
IMPORTANT: All .AVP (workflow) files should use PATH of /data01/avamar/repo/packages.
All other files should use PATH of /data01/avamar/src/.
Example:
C:\AvamarProcedureGenerator\Repository\Tools> pscp -pw changeme C:\myfiles\File1
root@10.10.10.1:/data01/avamar/src/
File1
69 kB |
EMC CONFIDENTIAL
version: 1.5.0
7 of 7