Professional Documents
Culture Documents
Main features
I
Benefits
I I
Constant-current, constant-voltage charger I Dual charging source (main adaptor or USB cable) I Fast charger current control: I up to 1A for main adaptor I up to 500mA for USB I Internal power device and sense resistor, option for external component for current higher than 1A I Programmable charger voltage (4.1V, 4.2V, 4.3V, 4.35V) I Battery over-voltage protection at 4.7V I Thermal regulation I Trickle charge mode at low battery voltage I Main adaptor voltage up to 16V I Gas gauge with 13-bit AD converter 2 I I C interface for gas gauge monitoring and device control I Charger status output pin I Power detection output pin I Programmable watchdog security timer I 4.7V LDO regulator (external pmos) I Package: VFQFPN 24, 4 x 4 x 1mm
Extended battery management solution High current charge for faster charging I Flexible charging solution (main adaptor or PC with USB) I Fully-integrated solution for optimized PCB size and bill-of-material cost
Applications
I
Cellular phones (GSM,CDMA,WCDMA,PDA, MP3 players and cordless phones) I Digital cameras I USB appliances I Bluetooth
www.st.com/mobile
STw4102
USB power device (500 mA) Main power device (1A max)
Driver
Thermal regulation
LDO
Gas gauge
Accumulator register control I2C interface AD converter
Battery monitoring
Control register AD converter
Application highlight
The STw4102 contains an accurate gas gauge based on a 13-bit AD converter. External resistor is used between battery and ground to sense a charge/discharge current. With a typical 30 resistor, current can be up to 2.5A. A thermal regulation circuitry limits the charge current against die high dissipation or high ambient temperature. An end-of-charge output pin indicates the charge termination. The STw4102 offers a wide range of flexibility with programmable battery over-voltage protection, power detection, watchdog, soft-start current and charge current monitoring.
R sense