You are on page 1of 1

15. 15.2.

1-GB

Sensors Differential pressure sensor for gaseous media

Type:

DSG...

Equipment / Functions
Sensor with a membrane system suitable for measuring differential or negative pressure of non-aggressive gas. The differential pressure to be measured takes effect on a silicone membrane, changes in position of which are compensated by a measuring spring, dependent on the degree of travel. Changes in position of the membrane are detected by a differential transformer and converted into an output signal of 0-10 V by an electronics unit in SMD technology. The differential pressure sensor supplies an output signal (0-10 V) when the pressure at the + connection exceeds the pressure at the - connection. Examples of applications in conjunction with controllers for fans: Pressure control for central extraction systems and variable air volume systems (VVS) Air volume control together with centrifugal fans (by means of a measuring device in the inlet duct) DSG DSGA

Versions / Technical data


Type Article-No. Measuring range [Pa] Overload protection (static pressure) DSG50 00155595 0 - 50 500 Pa (max. 0.2 bar) DSG200 00150229 0 - 200 0.2 bar (max. 0.2 bar) DSG200* 00155589 0 - 200 0.2 bar (max. 0.2 bar) DSG500 00150230 0 - 500 0.2 bar (max. 0.2 bar) DSG1000 00150231 0 - 1000 0.2 bar (max. 0.2 bar) DSG2000 00150684 0 - 2000 0.2 bar (max. 0.2 bar) DSG4000 00150685 0 - 4000 0.2 bar (max. 0.2 bar) DSG6000 00150694 0 - 6000 0.2 bar (max. 0.2 bar) Design with integrated digital display (LCD, 3-digit (mbar / Pa)), height of numerals 9 mm) available on request DSG50A* 384001 0 - 50 500 Pa (max. 0.2 bar) DSG1000A* 384005 0 - 1000 0.2 bar (max. 0.2 bar) DSG4000A* 384038 0 - 4000 0.2 bar (max. 0.2 bar) Interference emission EN 50081-1 Voltage supply 15 V ... 30 V = / 24 15 % Interference immunity EN 50082-2 Current consumption approx. 12 mA Fault limits Output voltage 0-10 V, Imax = 2 mA Use position: vertical, deviation of measuring value on Zero point deviation 0.75 % Total of linearity and hysteresis 90 turning 25 Pa: DSG50 ... DSG200 40 Pa: DSG500 ... DSG6000 for measuring range 50 Pa (DSG50): 1.0 % Lead length approx. 0.5 m for measuring range 200Pa (DSG200): 0.5 % Connection sockets ("+, -") 5 mm Temperature drift zero point: 0.3 %/10 K Housing protection IP65 Temperature drift measurement range: 0.2 %/10 K Permissible ambient temperature -10+50 C

*inclusive test certificate

Dimension sheet [mm]

Connection diagram

Ziehl-Abegg AG Heinz-Ziehl-Strae D-74653 Knzelsau


TIL99_48 1225

Tel.: +49 (0) 7940 16-0 Fax: +49 (0) 7940 16-504 info@ziehl-abegg.de http://www.ziehl-abegg.de

You might also like