Professional Documents
Culture Documents
PRODUCT CATALOGUE
High
Pressure PVC
Fittings
For Use
with
UPVC Pipes
PROUDLY IMPORTED BY
DPI Trading
90
www.dpitrading.co.za
www.incledon.co.za
GENERAL PROPERTIES
EN ISO9001:2008
General Properties
APPLICATIONS
1. USE
3. RANGE
A wide range of fittings are available for solvent jointing in metric
sizes (16 to 400mm) and BSP threaded fittings ( 8 (10mm) to 4"
(100mm)
A range of adaptor fittings are available to join pipe using the solvent
cement system to, valves and other accessories with BSP threads.
4. STANDARDS
2. MATERIALS
DIN 8063
UNI 7442/75, KIWI 54, NFT 54/028
BS 4346/1
BS21
PN 16
16
14
12
227,6
199,1
170,7
PN 10
10
142,2
08
113,8
06
85,3
04
02
00
56,9
-40
PSI
Pressure - Temperature Relationship According to DIN 3441 BLATT 1 and UNI 7442-75
28,4
-20
20
40
60
80
6 MECHANICAL PROPERTIES
Max working pressure in Kg / cm2
SERIES
Solvent jointing
Threaded
Adaptor Set
DIMENSIONS
from D 16 to D 160
from D 8 to G 4
from D 16 to 110
PN
NP
HOURS
1
HOURS
1000
Corresponding
to 50 years life
16
up to 16
up to 16
10 Bar
16 Bar
6,7
4,2
5,1
3,2
4,0
2,5
7.
ABBREVIATIONS
D -
D DN-
G -
CHARACTERISTICS
METHOD
UNITS
PVC
Density
DIN 53479
g/cm
1,40
Elongation
ISO R527
125
Modulus to traction
ISO R527
Kg/cm
Resistance to traction
ISO R527
N/mm
55
Tensile Strength
ISO R527
Kg/cm
520
ASTMD256
Kg
3,5 4,5
ISO R306
76
KcaL
mhc
Thermal conductivity
ASTM C177
ASTM D696
ASTM D696
Water absorption
ISO R527
ISO R527
Flammability
30,000 *
0,15
8 x 10
<4
self extinguishing M1
GENERAL PROPERTIES
EN ISO9001:2008
Assembling Instructions
PVC FITTINGS IN METRIC SIZES
1. METRIC SERIES
Can be solvent cemented to each other and to pipes in the same material type and size provided
that the tolerances are in accordance with the standards on page 3.
A strong, dense type of solvent cement recommended especially for large diameter fittings where the clearance
may be tight due to the ovaling effect. Such tolerances anyhow, in order to guarantee a perfect seal should
never exceed 0.6 mm using dense-type solvent cement and 0.3mm with a fluid-type solvent cement.
In order to obtain a perfect joint, it is recommended that the manufacturers instruction are strictly followed.
b. Mark the depth of entry on the pipe and using a suitable sized brush
apply solvent cement to both the fitting and the pipe
c. Immediately insert the pipe into the fitting and hold securely for a
minute to allow etching to occur
d. Clean away any excess solvent cement from the newly jointed fitting and
pipe surfaces
THREADED SERIES
Fittings in rigid PVC of the threaded series or of the adaptor series can be screwed to each other or to pipes and
other threaded parts.
In order to obtain easy screwing and perfect seal, the use of high quality PTFE tape is recommended.
The use of hemp, tow and lint, usually employed for metal fittings, is to be absolutely avoided. Such materials,
contrary to what happens with PTFE, are not rejected by coupling even when used in excess, cause female fitting
to expand in such a way as to cause breakage both during the assembly and later during operation.
GENERAL PROPERTIES
EN ISO9001:2008
Dimensions Data
Tolerance for Solvent Weld Jointing according to:
Fittings - ISO 727/- UNI 7442 - DIN 8063 - KIWA 54 NF T54-028
Pipes -
NOMINAL
DIAMETER
DN
10
15
20
25
32
40
50
65
80
100
110
125
150
175
200
225
Mean outside
diameter of pipes
Min.
16
20
25
32
40
50
63
75
90
110
125
140
160
200
225
250
16
20
25
32
40
50
63
75
90
110
125
140
160
200
225
250
Mean inside
diameter of fittings
Max.
Min.
Max.
16,20
20,20
25,20
32,20
40,20
50,20
63,20
75,30
90,30
110,30
125,30
140,40
160,40
200,50
225,50
250,50
16,10
20,10
25,10
32,10
40,10
50,10
63,10
75,10
90,10
110,10
125,10
140,20
160,20
200,30
225,30
250,30
16,30
20,30
25,30
32,30
40,30
50,30
63,30
75,30
90,30
110,40
125,40
140,50
160,50
200,60
225,60
250,60
Diameter
Diameter
nominal
of Screw
G
"
"
1"
1"
1"
2"
2"
2"
2"
3"
4"
5"
6"
-
16,66
20,95
26,44
33,25
41,91
47,80
59,61
65,71
75,18
81,53
87,88
113,03
138,43
163,83
-
PITCH
Nof
threads/1"
mm
19
14
14
11
11
11
11
11
11
11
11
11
11
11
-
1,337
1,814
1,814
2,309
2,309
2,309
2,309
2,309
2,309
2,309
2,309
2,309
2,309
2,309
-
Depth of
thread
Length of
thread
assembling
0,856
1,162
1,162
1,479
1,479
1,479
1,479
1,479
1,479
1,479
1,479
1,479
1,479
1,479
-
11,4
15,0
16,3
19,1
21,4
21,4
25,7
30,2
33,3
39,2
43,6
43,6
-
GENERAL PROPERTIES
EN ISO9001:2008
Reactives
Acetaldehyde
Acetaldehyde
Acetic acid
Acetic acid
Acetic acid
Acetic anhydride
Acetone
Adipic acid
Allyl alcohol
Aluminum chloride
Aluminum potassium sulphate
Aluminum sulphate
Ammonia, dry gas
Ammonia, liquid
Ammonia, aqueous
Ammonium chloride
Ammonium fluoride
Ammonium nitrate
Ammonium sulphate
Amyl acetate (1-Pentanol acetate)
Amyl alcohol (1-Pentanol)
Aniline
Aniline
Aniline hydrochloride
Antimony (III) chloride
Anthraquinone sulphonic acid
Arsenic acid
Arsenic acid
Benzaldehyde
Benzene
Benzoic acid
Borax
Boric acid
Bromic acid
Bromine, liquid
Butadiene
Butane, gas
Butanols
Butyl acetate
Butyl phenol
Butyric acid
Butyric acid
Calcium chloride
Calcium nitrate
Carbon dioxide (aqueous solution)
Carbon dioxide, dry gas
Carbon dioxide, wet gas
Carbon disulphide
Carbon tetrachloride
Chlorine, dry gas
Chlorine, aqueous
Chloroacetic acid
Chlorosulphonic acid
Chromic acid
Citric acid
Copper (II) Chloride
Copper (II) Fluoride
Concentration
40%
100%
Glacial
25%
60%
100%
100%
Sat. sol.
96%
Sat. sol.
Sat. sol.
Sat. sol.
100%
100%
DIL.Sol.
Sat. sol.
20%
Sat. sol.
Sat. sol.
100%
100%
100%
Sat. sol.
Sat. sol.
90%
DIL.Sol.
Sol.
Sat. sol.
0.10%
100%
Sat. sol.
Sat. sol.
Dil. sol.
10%
100%
100%
100%
Up to 100%
100%
100%
20%
98%
Sat. sol.
50%
Sat. sol.
100%
100%
100%
100%
Sat. sol.
Sol.
100%
From 1% to 50%
Sat. sol.
Sat. sol.
2%
Temperature
20 C
NS
NS
NS
S
S
NS
NS
S
L
S
S
S
S
L
S
S
S
S
S
NS
S
NS
NS
NS
S
S
S
S
NS
NS
L
S
S
S
NS
S
S
S
NS
NS
S
NS
S
S
L
S
S
NS
NS
L
L
S
L
S
S
S
S
60 C
_
NS
L
L
NS
NS
L
NS
S
S
S
S
NS
L
S
L
S
S
NS
L
NS
NS
NS
S
L
L
NS
NS
NS
L
L
NS
S
L
NS
NS
L
NS
S
S
L
S
S
NS
NS
NS
NS
L
NS
L
S
S
S
GENERAL PROPERTIES
EN ISO9001:2008
Reactives
Copper (III) sulphate
Cresols
Cresylic acid (Methyl benzoic acid)
Crotonaldehyde
Cyclohexanol
Cyclohexanone
Developers (photographic)
Dextrin
Dichloroethane
Dichloromethane
Diethyl either
Diglycolic acid
Dimenthylamine
Ethanediol (Ethylene-glycol)
Ethanol
Ethyl acetate
Ethyl acrylate
Fluosilicic acid
Formaldehyde
Formaldehyde
Formic acid
Furfurly alcohol
Gasoline (Aliphatic hydrocarbons)
Glucose
Glycerol
Glycolic acid
Hexadecanol
Hydrobromic acid
Hydrobromic acid
Hydrochloric acid
Hydrochloric acid
Hydrofluoric acid
Hydrofluoric acid
Hydrofluoric acid, gas
Hydrogen
Hydrogen Peroxide
Hydrogen sulphide, gas
Iron (III) chloride
Lactic acid
Lactic acid
Lead acetate
Lead acetate
Lead tetraethyl
Magnesium chloride
Magnesium sulphate
Maleic acid
Methanol
Methyl methacrylate
Milk
Molasses
Nickel sulphate
Nicotinic acid
Nitric acid
Concentration
Sat. sol.
Sat. sol.
Sat. sol.
100%
100%
100%
Work. sol.
Sat. sol.
100%
100%
100%
18%
30%
Work. sol.
95%
100%
100%
32%
Dil. sol.
40%
From 1% to 50%
100%
.
Sat. sol.
100%
30%
100%
10%
50%
20%
Greater than 30%
40%
60%
100%
100%
30%
100%
Sat. sol.
10%
From 10% to 90%
Dil. sol.
Sat. sol.
100%
Sat. sol.
Sat. sol.
Sat. sol.
100%
100%
Work. sol.
Sat. sol.
Work. sol.
Up to 45%
Temperature
20 C
S
NS
NS
NS
S
S
NS
NS
NS
S
S
S
S
NS
NS
S
S
S
S
NS
S
S
S
S
S
S
S
S
S
L
L
L
S
S
S
S
S
L
S
S
S
S
S
S
S
NS
S
S
S
S
S
60 C
S
NS
NS
NS
NS
NS
S
L
NS
NS
L
S
L
NS
NS
S
L
S
L
NS
S
L
S
S
S
L
L
L
S
NS
NS
NS
S
S
S
S
L
NS
S
S
S
S
L
L
NS
S
L
S
S
L
GENERAL PROPERTIES
EN ISO9001:2008
Reactives
Concentration
Temperature
20 C
60 C
Nitric acid
NS
NS
Oleic acid
100%
Oleum
10% of So3
NS
NS
30%
Oxalic acid
DIL.Sol.
Oxalic acid
Sat. sol.
Oxygen
100%
Ozone
100%
Perchloric acid
10%
Perchloric acid
70%
NS
80/20
NS
NS
Phenol
90%
NS
NS
Phenylhydrazine
100%
NS
NS
Phenylhydrazine hydrochloride
97%
NS
NS
Phosphine
100%
100%
NS
Picric acid
Sat. sol.
Potassium bromide
Sat. sol.
Potassium chloride
Sat sol.
Potassium chromate
40%
Potassium cyanide
Sol.
Potassium dichromate
40%
Sat. sol.
Sat. sol.
Potassium hydroxide
Sol.
Potassium nitrate
Sat. sol.
Potassium permanganate
20%
Potassium persulphate
Sat. sol.
100%
Pyridine
Up to 100%
NS
"
KEY
S - Excellent resistance
L - Limited resistance
NS - No resistance
GENERAL PROPERTIES
EN ISO9001:2008
Code
030443
405300
405301
405302
405303
405304
405305
405306
405307
405308
405309
405310
405312
405309
405310
405311
405312
16
20
25
32
40
50
63
75
90
110
160
200
315
160
200
250
315
355
400
**
**
14
16
19
22
26
31
38
44
51
61
86
105
162
86
105
131.5
162
184
206
9
11
14
17
23
28
34
40
48
58
81
102
240
81
102
187.5
240
177
202
PN
Mass/gr
23.5
26.5
32.5
41
50
60
75
89
106
129
188
232
358
188
232
286
358
393
439
16
16
16
16
16
16
16
16
16
16
16
10
10
16
10
10
10
6
6
13
20
35
50
90
135
247
375
620
1,060
3,200
5,850
23,500
3,200
5,850
12,160
23,500
20,850
26,350
PN
Mass/Gr
16
16
16
16
16
16
16
16
16
16
16
16
16
10
10
10
6
6
10
17
30
47
77
115
190
310
485
835
1,065
1,640
2,100
4,540
7,681
14,490
16,000
20,200
d E
45 ELBOW
Code
030485
405330
405331
405332
405333
405334
405335
405336
405337
405338
405339
405340
405341
405342
405343
405344
16
20
25
32
40
50
63
75
90
110
125
140
160
200
250
315
355
400
14
16
19
22
26
31
38
44
51
61
69
76
86
105
131.5
166
184
206
5.5
5.5
6
8
10
12
15
18
21
25
27
32
36
43
58
66
77
83
23.5
28
34
42
51
61
75
89
106
128
145
164
184
233
288
360
393
439
**
**
** Available on request
NB: All measurements in mm
E
d
Z
L
GENERAL PROPERTIES
EN ISO9001:2008
Code
dxd1
030530
030531
030532
030533
030534
030535
030536
030537
030538
030539
030543
030540
030541
030542
030544
030557
030545
030621
030546
405600
030547
030548
030549
030556
030550
030551
030552
030625
030624
030623
030622
030629
030628
030627
030626
030560
030553
030554
030630
**
**
**
**
**
**
**
**
**
25 x 20
32 x 20
32 x 25
40 x 20
40 x 25
40 x 32
50 x 20
50 x 25
50 x 32
50 x 40
63 x 20
63 x 25
63 x 32
63 x 40
63 x 50
75 x 32
75 x 40
75 x 50
75 x 63
90 x 40
90 x 50
90 x 63
90 x 75
110 x 50
110 x 63
110 x 75
110 x 90
125 x 63
125 x 75
125 x 90
125 x 110
140 x 75
140 x 90
140 x 110
140 x 125
160 x 90
160 x 110
160 x 125
160 x 40
200 x 90
200 x 110
200 x 160
250 x 110
250 x 160
250 x 200
315 x 160
315 x 200
315 x 250
L
19
22
22
26
26
26
31
31
31
31
38
38
38
38
38
44
44
44
44
51
51
51
51
61
61
61
61
69
69
69
69
76
76
76
76
86
86
86
86
106
106
106
129
129
129
164
164
164
** Available on request
NB: All measurements in mm
L1
16
16
19
16
16
22
26
16
19
22
26
31
22
26
33
22
26
31
38
26
31
38
44
31
38
44
51
44
44
51
61
44
51
61
69
51
61
69
76
52
63
87
63
63
87
86
106
131
Z
14
17
17
21
21
21
26
26
26
26
33
33
33
33
33
39
39
39
39
47
47
47
47
57
57
57
57
66
66
66
66
72
72
72
72
82
82
82
82
58
58
87
61
61
55
88
102
127
Z1
14
17
17
21
21
21
26
26
26
26
33
33
33
33
33
39
39
39
39
47
47
47
47
57
57
57
57
66
66
66
66
72
72
72
72
82
82
82
82
102
113
106
128
128
129
161
179
160
E1
PN
33.5
42
42
51
51
51
61
61
61
61
75
75
75
75
75
89
89
89
89
106
106
106
106
129
129
129
129
148
148
148
148
163
163
163
163
154
184
184
184
228
228
228
284
284
284
355
355
355
28
28
34
28
34
42
28
34
42
51
28
34
42
51
61
42
51
51
75
51
61
75
89
61
75
89
106
75
89
106
129
89
106
129
148
106
129
148
163
112
137
185
134
134
189
195
228
255
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
10
Mass/Gr
42
69
70
112
115
118
155
166
170
178
268
270
275
288
300
463
465
465
478
702
740
740
760
1250
1200
1220
1250
1660
1700
1750
1830
2480
2490
2530
2590
3790
3840
3890
3940
5200
5200
6200
8300
8300
9900
16150
16600
18500
E1
d1
L1
d E
Z1
GENERAL PROPERTIES
EN ISO9001:2008
Code
405550
405551
405552
405553
405554
405555
405556
405557
405558
405561
405562
405564
405566
**
**
20
25
32
40
50
63
75
90
110
160
200
250
315
355
400
16
19
22
26
31
38
44
51
61
86
106
132.5
165
184
206
11
14
17
21
26
33
39
47
57
81
102
127
159
294
280
PN
Mass/Gr
16
16
16
16
16
16
16
16
16
16
10
10
10
6
6
25
44
75
125
183
315
495
790
1,330
4,100
7,200
12.070
24,350
35,900
39,900
PN
Mass/Gr
28
34
42
51
61
75
88
106
129,5
188
232
286
360
386
432
d E
SOCKET
Code
030379
405250
405251
405252
405253
405254
405255
405256
405257
405258
030389
030390
405259
405260
405261
405262
**
**
16
20
25
32
40
50
63
75
90
110
125
140
160
200
250
315
355
400
14
16
19
22
26
31
38
44
51
61
69
76
86
106
132
165
185
206
3
3
3
3
3
3
3
4
5
6
7
8
8
11
10
12
11
12
23.5
28
34
42
51
61
75
88
106
129
145
161
181
226
287
355
386
432
16
16
16
16
16
16
16
16
16
16
16
16
16
10
10
10
6
6
9
15
23
36
60
85
45
22
53
605
840
1,100
1,400
2,660
5,800
9,830
11,200
12,900
REDUCING SOCKET
Code
130451
130455
130458
130462
130466
130474
130478
130486
030597
**
**
dxd1
25 x
32 x
40 x
50 x
63 x
75 x
90 x
110 x
140 x
160 x
160 x
20
25
32
40
50
63
75
90
110
110
140
** Available on request
All measurements in mm
L1
19
22
26
31
38
44
51
61
76
86
86
16
19
22
26
31
38
44
51
61
61
76
6
6
6
6
6
6
6
6
25
28
8
34
42
51
61
75
89
106
129
160
180
184
E1
28
33
41
50
60,5
75
88
106
129
129
164
PN
Mass/Gr
16
16
16
16
16
16
16
16
16
16
16
25
35
58
80
120
210
300
510
970
1250
1350
d1
L1
E1
GENERAL PROPERTIES
EN ISO9001:2008
Code
PN
Mass/Gr
030672
405400
16
20
14
16
22
27
23
28
16
16
7
10
405401
25
19
31
33
16
18
405402
405403
405404
405405
405406
405406
405408
030683
405410
405411
405412
32
40
50
63
75
90
110
125
140
160
200
22
28
32
39
44
51
61
69
77.5
86
106
36
43
49
57
67
80
95
102
114
126
145
41
50
60.5
75
89
106
129
145
161
181
227
16
16
16
16
16
16
16
16
16
16
10
30
45
70
120
188
295
490
680
927
1,146
2,048
L
H
REDUCING BUSH
Code
405100
405105
405106
405110
405111
405112
405116
405117
405118
030561
405122
405123
405124
**
405128
405129
405130
405139
405140
405141
405150
405151
405152
405160
405161
405162
405171
405172
405173
405182
405183
405184
405195
405205
405216
405229
dxd1
25 x
32 x
32 x
40 x
40 x
40 x
50 x
50 x
50 x
63 x
63 x
63 x
63 x
75 x
75 x
75 x
75 x
90 x
90 x
90 x
110 x
110 x
110 x
125 x
125 x
125 x
140 x
140 x
140 x
160 x
160 x
160 x
200 x
250 x
250 x
315 x
20
20
25
20
25
32
25
32
40
25
32
40
50
32
40
50
63
50
63
75
63
75
90
75
90
110
90
110
125
110
125
140
160
160
200
250
** Available on request
All measurements in mm
L1
19
22
22
26
26
26
31
31
31
38
38
38
38
44
44
44
44
51
51
51
61
61
61
69
69
69
76
76
76
86
86
86
106
134
134
165
16
16
19
16
19
22
19
22
26
19
22
26
31
22
26
31
38
31
38
44
38
44
51
44
51
61
51
51
69
61
69
76
86
87
107
132
Z
3
6
3
10
7
4
12
9
5
19
16
12
7
22
18
13
6
20
13
7
23
17
10
25
18
8
25
15
7
25
17
10
20
47
27
33
Fig.
PN
A
A
A
B
A
A
B
B
A
B
B
B
A
B
B
B
A
B
B
A
B
B
A
B
B
A
B
B
A
B
B
A
B
B
B
B
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
10
10
10
10
Mass/Gr
6
15
10
28
29
19
45
45
35
56
83
83
61
130
125
122
85
210
180
140
372
335
262
440
365
260
600
450
335
820
745
565
1,360
2,784
2,700
4,100
d1
Z
L1
L
d1
Z
L1
L
GENERAL PROPERTIES
EN ISO9001:2008
405649
405650
405651
405652
405653
405654
405655
405656
405657
405658
16
20
25
32
40
50
63
75
90
110
Z1
Z2
14
16
19
22
26
31
38
44
51
61
3
3
3
3
3
3
3
3
5
5
10
10
10
10
12
14
18
18
18
18
G1
"
34
1"
42
1" 52
1" 59
2"
72
2" 79
2" 96
3" 119
4
134
5
163
O-ring PN
3062
4081
4112
4131
6162
6187
6237
6312
6362
6450
Mass/Gr
16
16
16
16
16
16
16
16
16
16
30
42
70
97
155
216
340
580
760
1280
d G1 E
Z1
Z2
STUB
Code
030795
030796
030797
030798
030799
030800
030801
030802
030803
030804
030805
030806
030807
030808
**
**
**
25
32
40
50
63
75
90
110
125
140
160
200
250
315
355
400
450
DN
E1
PN
Mass/Gr
20
25
32
40
50
65
80
100
110
125
150
190
225
300
350
400
450
19
22
26
31
38
44
51
61
69
76
86
106
131
162
184
206
156
3
3
3
3
3
3
5
5
5
5
5
7
10
11
8
12
8
7
7
8
8
9
10
11
12
13
14
16
18
20
27
30
30
30
33
41
50
61
76
90
108
131
147
165
188
231
273
346
386
432
487
41
50
61
73
90
106
125
150
168
188
213
253
307
379
431
483
538
16
16
16
16
16
16
16
16
16
16
16
10
10
10
6
6
6
16
25
40
60
113
160
263
425
540
750
1,045
1,746
2,320
4,578
6050
8100
7400
E1
LOOSE FLANGE
Code
DN
030812
25
20
34
105
030813
32
25
42
115
030814
40
32
51
030815
50
40
62
030816
63
50
030817
75
030818
90
Drill
N-Fori
4
Bolts
PN
Bulloni
M12x 60 16
Mass/Gr
12
75
14
14
85
14
M12x 60 16
120
142
15
100
18
M16x 70 16
195
152
16
110
18
M16x 75 16
230
78
165
18
125
18
M16x 80 16
280
65
92
185
19
145
18
M16x 90 16
355
80
110
200
20
160
18
M16x 90 16
430
030819 110
100
133
220
22
180
18
M16x100 16
520
030820 125
110
149
230
24
190
18
M16x100 16
585
030821 140
125
167
250
25
210
18
M16X110 16
700
030822 160
150
190
285
28
240
22
M20X120 16
930
030823 200
190
235
340
30
295
22
M20X120 16
1200
030824 250
90
225
280
385
34
350
22
12
M20X120 10
1650
**
315
300
349
445
31
400
22
12
M20X120 10
2700
**
355
350
385
434
34
460
22
16
M20X120
3550
**
400
400
438
572
34
515
25
16
M20X120
4500
**
450
450
488
614
32
585
25
20
M20X120
4100
** Available on request
NB: All measurements in mm
H I
GENERAL PROPERTIES
EN ISO9001:2008
Code
PN
Mass/Gr
130220
130221
130222
130223
130224
130225
130226
130227
130228
20
25
32
40
50
63
75
90
110
16
20
22
26
31
38
44
52
61
40
50
65
80
100
126
150
180
220
28
35
42
51
63
77
95
113
133
16
16
16
16
16
16
16
16
16
45
75
125
201
318
510
1,016
1,790
2,860
E
L
Code
405450
405455
405460
405465
405470
405475
405480
405490
405495
dxG
20 x
25 x
32 x
40 x
50 x
63 x
75 x
90 x
110 x
"
"
1"
1"
1"
2"
2"
3"
4"
L1
PN
Mass/Gr
16
19
22
26
31
38
44
51
61
15,0
16,3
19,1
21,4
21,4
25,7
30,2
33,3
39,3
28
34
42
51
58
75
89
103
130
24
27
30
36
41
48
58
65
76
30
36
46
55
60
75
90
95
130
16
16
16
16
16
16
16
16
16
20
25
43
65
80
135
125
310
480
G E
L1
Z
L1
Code
dxG
L1
L2
PN
Mass/Gr
405000
405005
405010
405015
405020
405025
405033
405035
405040
**
20/25 x "
25/32 x "
32/40 x 1"
40/50 x 1"
50/63 x 1"
63/75 x 2"
75/90 x 2"
90 x 110 x 3"
110/125 x 4"
160/110 x 6"
16
19
22
26
31
38
44
51
61
75
19
22
26
31
38
44
51
61
69
80
15,0
16,3
19,1
21,4
21,4
25,7
30,2
33,3
39,3
45.0
46
50
57
66,5
74
84
99
110
120
200
27
50
57
55
65
75
95
115
130
130
16
16
16
16
16
16
16
16
16
16
15
26
40
75
113
150
270
490
490
740
** Available on request
NB: All measurements in mm
d1
L2
GENERAL PROPERTIES
EN ISO9001:2008
REDUCING SOCKETS
REDUCING BUSHES
20mm - 110mm
32x25x20mm - 315x280x200mm
20x16mm, 50x20mm,160x90mm
CAPS
CROSSES
250mm
20mm - 110mm
20mm - 250mm
BLANK FLANGE
PIPE CLIPS
ADAPTOR ELBOWS
Plain to Threaded
20mm - 200mm
20mm - 200mm
20mmx to 110mmx4"
ADAPTOR TEES
Plain to Threaded
ADAPTOR UNIONS
Plain to Threaded
ADAPTOR NIPPLES
Female (plain to threaded)
20mmx to 110mmx4"
20mmx to 110mmx4"
20mmx16mmx to
110mmx90mmx4"
ADAPTOR NIPPLES
Male/Female (male threaded)
HOSE ADAPTOR
Plain
THREADED ELBOWS
Female
16mm x12mm x to
125mmx110mmx4"
16mm to 63mm
to 4"(15mm to 100mm)
** Available on request
NB: All measurements in mm
GENERAL PROPERTIES
EN ISO9001:2008
THREADED TEES
Female
THREADED SOCKETS
Female
THREADED UNIONS
Female
to 4"(15mm to 100mm)
to 4"(15mm to 100mm)
to 4"(15mm to 100mm)
THREADED CAPS
Female
NIPPLES THREADED
Male
PLUGS THREADED
Male
to 4"(15mm to 100mm)
to 4"(15mm to 100mm)
to 4"(15mm to 100mm)
HOSE ADAPTOR
Male Threaded
REDUCER THREADED
Male to Female
REDUCING NIPPLE
Male Threaded
x to 4"x3"
x to 4"x3"
REDUCING SOCKET
Female Threaded
TANK CONNECTORS
BACKNUTS
Female Threaded
x to 4"x3"
x3"
to 2"
CHECK VALVES
75mm to 200mm
20mm to 110mm
to 4"(15mm to 100mm)
to 2"(10mm to 50mm)
BUTTERFLY VALVES
75mm to 250mm
** Available on request
NB: All measurements in mm
EN ISO9001:2008
PRODUCT CATALOGUE
INCLEDON
BLOEMFONTEIN Tel: 051 408 9200 BURGERSFORT
GERMISTON
KLERKSDORP
NELSPRUIT
POLOKWANE
DURBAN
KATHU
NORTHRIDING
SECUNDA
Tel: 017 631 4200 WELKOM
PORT ELIZABETH Tel: 041 404 1800