Professional Documents
Culture Documents
| Slide 2
Introduction
| Slide 3
Introduction
Power Electronics: Application of solid-state electronics for conversion of electrical power efficient control and
Often employed whenever there is a need to modify a form of electrical energy (either changing its voltage, current or frequency) Potential to make a huge contribution to the low carbon economy Technology where Malaysia has a high growth and high value, making a significant contribution to exports and the wealth of the nation, as well as providing high-quality employment.
| Slide 4
Technical
| Slide 5
| Slide 6
Use a Squirrel Cage Induction Generator Directly connected to grid (through a soft starter) Needs capacitor banks for reactive power compensation
| Slide 7
Doubly Fed Technology Doubly fed asynchronous generator Stator directly connected to the grid, power converter in the rotor circuit Allows for variable speed, hence better caption of energy from wind
| Slide 8
Full Scale Converter Technology Many type of generators can be used, e.g. (PM) Synchronous generator, Asynchronous generator With and without gearbox depending on generator design Full power converter between the generator and the grid
| Slide 9
| Slide 10
| Slide 11
| Slide 12
Shunt Compensation
TCR TSC SVC STATCOM
Series Compensation
TSSC TCSC FCSC SSVC SSTATCOM
Phase-Angle Compensation
UPFC
| Slide 13
| Slide 14
| Slide 15
| Slide 16
| Slide 17
| Slide 18
| Slide 19
Ugrid=Upoc Ucompensator=Uconv
| Slide 20
| Slide 21
| Slide 22
| Slide 23
| Slide 24
| Slide 25
| Slide 26
* Offshore Application
| Slide 27
| Slide 28
| Slide 29
| Slide 30
| Slide 31
| Slide 32
| Slide 33
| Slide 34
| Slide 35
| Slide 36
| Slide 37
| Slide 38
| Slide 39
| Slide 40
| Slide 41
| Slide 42
| Slide 43
Conclusion
| Slide 44
Conclusion
STATCOM must be installed in order for wind turbine farm before can get connected to national grid due to stringent Grid Code applied. STATCOM have vital roles to enable the renewable energy generation combination on national grid. Without STATCOM, wind turbine can only work in isolated network. STATCOM offer optimisation of power output, reduce harmonic and ensure continuous stability to power system regardless the compensation demand whether static response or dynamic response. The effectiveness of STATCOM can be further improved by introducing the energy storage devices such as BESS or DynaPeaQ system.
| Slide 45
Question?
| Slide 46