Professional Documents
Culture Documents
% RPM (list) K K
478.5 kW 562. kW
total power consumption coeff. of performance (cooling) side load oil specifications oil inlet temperature total oil flow oil density oil specific heat capacity oil dynamic viscosity oil heat conductivity oil weight percentage
109.7 kW 4.36 none PAO3 (P68) 354 50.0 deg.C 4.4 m3/h 815.2 kg/m3 2.20 kJ/kgK 32.291 Cpoise 0.141 W/m.K 100.00 % -6.6 deg.C 2.70 bar_a 63.48 deg.C 0.5978 m3/kg 4.20
economiser type none oil cooling system refrig. cooling oil cooler load - actual 30.2 kW oil cooler load - min. cap. 10.0 % 45.0 kW oil separator: OHU4131/3226D2 oil separator load: 76.9 %
motor: Schorch - 132 kW - 50Hz - IP23 start-up: star/delta - 2.9 sec. equalization temp.(max) operating conditions: suction pressure 0.64 bar_a discharge pressure suction temperature -37.00 deg.C discharge temperature suction specific volume 1.7569 m3/kg discharge specific volume enthalpy difference (ref.) 1257.49 kJ/kg pressure ratio (p2/p1) suction side mass flow 0.3805 kg/s errors and warnings: WARNING - please compute oil cooler separately (as evaporator)! WARNING - no oil cooler type selected - see log ! WARNING - internal RE < 20 - results not reliable ! The tolerance of all full load performance data issued for the products is according to EN-12900. Performance measurements according to ISO-917
SABROE Refrigeration
Refrigeration Plant Computation
File User : CPD2 : YORK REFRIG. - THAILAND Ref : WYU Page : 1
% RPM (list) K K
562.0 kW 780. kW
181.2 kW 3.10 none PAO3 (P68) 354 50.0 deg.C 6.4 m3/h 815.2 kg/m3 2.20 kJ/kgK 32.291 Cpoise 0.141 W/m.K 100.00 % 0.0 deg.C 14.70 80.73 0.1078 587.4 5.44 bar_a deg.C m3/kg kg/m3
economiser type none oil cooling system refrig. cooling oil cooler load - actual 99.8 kW oil cooler load - min. cap. 10.0 % 74.1 kW oil separator: OHU4123/2716D1 oil separator load: 36.8 %
motor: Schorch - 280 kW - 50Hz - IP23 start-up: star/delta equalization temp.(inp) operating conditions: suction pressure 2.71 bar_a discharge pressure suction temperature -6.76 deg.C discharge temperature suction specific volume 0.4577 m3/kg discharge specific volume enthalpy difference (ref.) 1084.33 kJ/kg liquid density pressure ratio (p2/p1) suction side mass flow 0.5183 kg/s errors and warnings: NB: starting torque check - motor data in error - no check ! WARNING - please compute oil cooler separately (as evaporator)! WARNING - no oil cooler type selected - see log ! WARNING - internal RE < 20 - results not reliable ! The tolerance of all full load performance data issued for the products is according to EN-12900. Performance measurements according to ISO-917
NH3 2-Stage compressor Cooling Capacity = 478.5 kW Total Power consumption = 109.7+181.2 = 290.9 kW EUROTEK Fluidize Bed Line 5 Cooling load requirement = 425 kW Total Power consumption = (425x290.9/478.5) = 258.4 kW