Professional Documents
Culture Documents
ROAD WORK(PART-A)
Discription Unit Qty. Rate Amount
1-
Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil cum 56958.00 123.10 7011529.80
2-
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) DSR-07/16.1/P-240 Supplying and stacking at site 90mm to 45mm size stone aggregate DSR-07/16.3.1/P-240 63mm to 45mm size stone aggregate DSR-07/16.3.2/P-240 53mm to 22.4mm size stone aggregate DSR-07/16.3.3/P-240 Lying spreading and compacting stone aggregate sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. DSR-07/16.4/P-240 supplying and stacking of moorum at site DSR-07/16.3.10/P-240
sqm
13724
4.55
62444.29
3a) b) c) 4-
cum
9745.64
192.55
1876522.98
5-
cum
724.7
421.85
305714.70
6-
7-
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres: With FPS bricks of class designation 150 DSR-07/16.7.1/PRmt Providing & laying surface dressing as wearing course in single coat using crused stone aggrregate of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8 - 10 tonne smooth wheeled steel roller 80/100 A.R./GNIDA sqm Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 7.50 kg of bitumen for 10 sqm A.R./GNIDA sqm
4687.62
52.35
245396.91
17805.8
44.8
797699.84
8-
17805.8
15.1
268867.58
9Providing & laying mix seal on surface with spicified graded aggregate for wearing course including loading of aggregates with F.E.loader and hot mixing of bitumen filler with aggregate in hot mix plant transporting the mechanical paver finisher to the riquired levels , graded and rolling with power to achieve the drsired density excluding cost of Tack coat 25 mm thick compacted with bitumen CRMB-55 A.R./GNIDA sqm
Providing and carting of following dia R.C.C. hume pipe S & S NP-3 class & specials in site of work lowering the same into trenches in depth upto 1.50m below G.L. true to alignment jointing with 1:2 cement mortar in coarse sand including excavation of earth below invert kevel of pipe . A.R./GNIDA
17805.8
123.38
2196879.60
250 mm NP- 3
Rmt
196
367.6
72049.6
Constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With FPS bricks of class designation 150 Each TOTAL NON DSR ITEM TOTAL DSR -07 ITEM (20414552.88 - 10347027.28 ) ADD 26 % COST INDEX ON DSR -07( 10067525.60 )
24
3388.65
TOTAL
GRAND TOTAL
23032097.85
DRAIN WORK(PART-B)
Discription Unit Qty. Rate Amount
1-
Earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom .lifts upto 1.5 m including geatting out the excavated soil and disposal of surplus excavated soil as dircted within a lead of 50.0m A.R/GNIDA cum Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum Brick work with FPS bricks of class designation 150 in foundation and plinth in: Cement mortar 1:6 (1 cement :6 coarse sand) cum DSR-07/6.1.2/P-79 Brick work with Modular bricks of class designation 75 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR-07/6.2.1/P-99 cum Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR-07/4.1.3/P-79 cum 12mm cement plaster of mix 1 : 6 (1 cement :6 coarse sand) centering & shuttering including suspended floors ,roofs landing Providing & fixing in cement mortar 1: 6(1 cement : 6 fine sand) red sand stone 5900.7 42.4 250190.95
2-
706.09
2449
1729214.41
3-
2069.4
2121.75
4390834.32
4-
122.91
2293.51
281895.31
5-
4.22
3257.45
13746.44
6-
sqm
8786
72.7
638739.29
7a)
sqm
32.4
187.35
6070.14
b)
sqm 8Edges of slabs and breaks in floors and walls Above 20 cm wide DSR-07/5.9.16.2/PProviding and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR-07/4.1.2/P10-
23.76
173.9
4131.86
sqm
47.65
278.25
13258.61
9-
cum
23.85
3732.00
89008.20
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: Cold twisted bars. D.S.R-07/5.22.3/P-92 kg Filling available excavated earth ( excluding rock ) in treanch ,plinth sides of foundation etc . In layers not exceeding 20cm in depth , consolidating each deposited layer by raming and watering ,lead up to 50 m and lift upto 1.50m A.R./GNIDA Total excavated earth -P.C.C -1 : 4 : 8 -Brick work-1 :6 & 1:4 cum TOTAL NON DSR ITEM TOTAL DSR -07 ITEM (7601540.84 - 318857.98 ) ADD 26 % COST INDEX ON DSR -07(7282682.86 )
2808.3
42.70
119916.12
11-
3125.2
20.65
GRAND TOTAL
9495038.38
SEWER WORK(PART-C )
Discription Unit Qty. Rate
1Earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom .lifts upto 1.5 m including geatting out the excavated soil and disposal of surplus excavated soil as dircted within a lead of 50.0m A.R./GNIDA 1.1 0 - 1.50 M.B.G.L. cum 1.2 1.50 -3.00 M.B.G.L. 1.3 3.0 -4.50 M.G.B.L. 2Filling available excavated earth ( excluding rock ) in treanch ,plinth sides of foundation etc . In layers not exceeding 20cm in depth , consolidating each deposited layer by raming and watering ,lead up to 50 m and lift upto 1.50m A.R./GNIDA cum 3Providing & arting of following dia R.C.C. hume pipe S & S NP-2 class & specials in site of work lowering the same into trenches in depth upto alignment jointing with 1 : 2 cement mortar in coarse sand including excavaion of earth below invert levelof pipe .A.R./GNIDA 0.0 -1.50m 250 mm NP-2 Pipe 1.50 - 3.00 m 250 mm NP-2 Pipe 3.00 -4.50 m 250 mm NP-2 Pipe Providing & laying in position cement concrete 1 : 4 : 8 ( 1 cement : 4 course sand : 8graded stone aggregate 40 mm nominal size) in concrete cradle under NP- 2 Pipe of following diameter including centering & shuttering but excluding excavation as per approved. 250 mm dia Rmt 2692 93.92 12758.78 20.65 cum cum
a) b) c) 4-
5-
(A)
Supply of all materials , labour and T & P and constructing circular manholes of following sizes as per type design and drawing Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately). DSR-07/19.9.1.2/PEach Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 55.00 4933.50
6-
1.22m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to IS 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete
7-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centrering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately). DSR-07/19.11.1.2/PEach Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 1.52m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to IS 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately).
35
8946.25
8-
DSR-07/19.13.1.2/PAddition or substraction due to variation in shaft for following sizes of manholes. Extra depth of 0.91 dia manhole 1.67m deep with SFRC cover and frame (heavy dutyb HD-20 grade designation) 560 mm internal dia meter conforming to IS 12592 Total weight of cover and frame not less than 182 kg fixed in cement concrete 1 :2 :4 (1 cement :2 course sand : 4graded stone aggregate 20mm nominal size) including centering & shuttering , supply and fixing poly propelene foot rest but excluding excavation all complete.
Each
20.00
18281.600
Rmt 9Extra depth of 1.22 dia manhole 2.29 m deep with SFRC cover and frame (heavy dutyb HD-20 grade designation)
102.53
2289.75
560 mm internal dia meter conforming to IS 12592 Total weight of cover and frame not less than 182 kg fixed in cement concrete 1 :2 :4 (1 cement :2 course sand : 4graded stone aggregate 20mm nominal size) including centering & shuttering , supply and fixing poly propelene foot rest but excluding excavation all complete. Rmt 10Extra depth of1.52dia manhole 2.30 m deep with SFRC cover and frame (heavy dutyb HD-20 grade designation) 560 mm internal dia meter conforming to IS 12592 Total weight of cover and frame not less than 182 kg fixed in cement concrete 1 :2 :4 (1 cement :2 course sand : 4graded stone aggregate 20mm nominal size) including centering & shuttering , supply and fixing poly propelene foot rest but excluding excavation all complete. Rmt 11Brick work with FPS bricks of class designation 150 in foundation and plinth in Cement mortar 1:6 (1 cement :6 coarse sand) DSR-07/6.1.2/P-99 1212mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) DSR-07/13.4/P-201 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR-07/4.1.3/P-79 14Providing and fixing VENT SHAFT pipe for releasing gasesnfrom sewer line with all necessary T & P etc . Required for complition of work Each TOTAL NON DSR ITEM TOTAL DSR -07 ITEM (3473783.89 - 20655832.45 ) ADD 26 % COST INDEX ON DSR -07(1407951.44 ) 4 9583.43 TOTAL cum 5 2121.75 14.82 6956.05 34.69 2954.75
50.00
72.70
13-
cum
3257.45
GRAND TOTAL
NT AUTHORITY
26 % EXTRA
Amount
53.42
263468.81
252832.64
271342.50
313118.75
365632.00
234768.07
102500.28
103088.66
10608.75
3635.00
3257.45
3839851.26
S.no 1-
DSR-07
Discription Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil
Unit
Qty.
Rate
cum 2Carriage of material by mechanical transport including loading, unloading and stacking Earth 1.1`.2 3Lead 3.00 k.m. Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) cum
128710.80
41.50
5341498.2
128710.80
42.80
5508822.24
16.2 cum 4Preparation and consolidaton of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and disposal of surplus earth lead upto 50 metres. 16.1 5(a) 16.3.1 b) 16.3.2 Supplying and stacking at site 90mm to 45mm size stone aggregate Supplying and stacking at site 63mm to 45mm size stone aggregate cum 19846.19 768.45 15250806.45 cum 7484.92 742.3 5556054.327 sqm 58764.00 33.90 1992099.6 4.50
c) 16.3.3 616.3.1 7-
Supplying and stacking at site 53mm to 22.4mm size stone aggregate Supplying and stacking of moorum at site cum Lying spreading and compacting stone aggregate sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 810 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. 16.4 2977.49 421.85 1256055.591 cum 5924.24 810.55 4801889.895
8-
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres: 16.7.1
9-
With FPS bricks of class designation 75 mtr Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.
7920
52.35
414612
4.1.8 10-
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Brick work with FPS bricks of class designation 150 in foundation and plinth in:
cum
134.55
2449
329512.95
Cement mortar 1:4 (1 cement, : 4 coarse sand) 12mm cement plaster of mix:
cum
206.31
2121.75
437738.2425
1:4 (1 cement : 4 coarse sand) sqm Providing & carting of following dia R.C.C hume pipe S & S NP3 class & specials in site of work lowering the same into trenches in depth upto 1.50 m below G.L. true to alignment jointing with 1:2 cement mortar in coarse sand including excavation of earth below invert level of pipe . 250 mm dia NP- 3 Pipe Rmt
291.00
72.70
21155.7
1074.04
367.6
394817.104
13-
Providing & laying in position cement concrete 1 : 4 : 8 ( 1 cement : 4 course sand : 8graded stone aggregate 40 mm nominal size) in concrete cradle under NP- 3 Pipe of following diameter including centering & shuttering but excluding excavation A.R./GNIDA 250 mm dia NP-3 Concrete cradle Rmt Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-charge). 1074.04 95.47 102538.5988
14-
16.69 cum
15Providing &laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder 80/100@ 1.20 liad on prepared surface and rolling with 8 - 10 tonne smooth wheeled steel roller. A.R./GNIDA sqm Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 5.00 kg of bitumen for 10 sqm 75714.00 44.8 3391987.2 448.50 4247.70 1905093.45
16-
17-
MOST/A.R./GNIDA sqm Providing laying & rolling of close - graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity ,and finishing to required level and gread.
75714
15.1
1143281.4
MOST/A.R./GNIDA
sqm
75714
123.38
9341593.32
18-
Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
18.34.1 1913.37.1
With F.P.S. brick White washing with lime to give an even shade: New work (three or more coats)
Each
40.00
6147.95
245918
2691.00
6.75 TOTAL
18164.25
Grand Total
45149364.85
21620809.27 66770174.13
Discription
Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil
No.
Qty.
Qty as per calculation sheet 21.1 1.1.2 416.1 Earth Lead 3.00 k.m. Preparation and consolidaton of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and disposal of surplus earth lead upto 50 metres. 1x2 1x2 Qty same as item no. -1 Carriage of material by mechanical transport including loading, unloading and stacking
128710.80 cum
128710.80 cum
970 2020
5(a)
16.3 16.3.1
Supplying and stacking at site 90mm to 45mm size stone aggregate Road No - 4 (45.00 M wide Road ) Road No - 5 (60.00 M wide Road ) 1x2 1x2 970 2020 7.8 10.8 0.135 0.135 2042.82 cum 5890.32 7933.14 cum ADD 2.00% FOR Curve 158.66 cum 8091.80 cum Less 7.50 % Voides (-) TOTAL -606.89 cum 7484.92 cum
b) 16.3.2
Supplying and stacking at site 63mm to 45mm size stone aggregate Road No - 4 (45.00 M wide Road ) 1x2 2x2 Road No - 5 (60.00 M wide Road ) 1x2 2x2 970.0 970.0 2020.0 2020.0 10.50 10.50 10.50 10.50 0.135 0.10 0.135 0.10 2749.95 cum 4074.0 cum 5726.7 cum 8484 cum 21034.65 cum ADD 2.00% FOR Curve 420.69 cum 21455.343 cum Less 7.50 % Voides (-) TOTAL -1609.15 cum 19846.19 cum
C)
16.3.3
Supplying and stacking at site 53mm to 22.4mm size stone aggregate Road No - 4 (45.00 M wide Road ) Road No - 5 (60.00 M wide Road ) 1X2 1x2 970.0 2020.0 10.50 10.50 0.10 0.10 2037 cum 4242 cum
6279.00 cum ADD 2.00% FOR Curve 125.58 cum 6404.58 cum Less 7.50 % Voides (-) TOTAL 616.3.10 Supplying and stacking of moorum at site 63 - 45 mm 53 - 22.4 mm 716.4 Lying spreading and compacting stone aggregate sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. Qty same as item no. -5(a) Qty same as item no. -5(b) Qty same as item no. -5( c ) TOTAL 816.7.1 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres: With FPS bricks of class designation 75 1x2x2 1x2 9Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4.1.8 1X2 1x2 10Brick work with FPS bricks of class designation 150 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement, : 4 coarse sand) 1X2 1x2 970 2020 0.23 0.23 0.15 0.15 TOTAL 1113.4 13.4.1 12mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand) 1X2 1X2 12Providing & carting of following dia R.C.C hume pipe S & S NP-3 class & specials in site of work lowering the same into trenches in depth upto 1.50 m below G.L. true to alignment jointing with 1:2 cement mortar in coarse sand including excavation of earth below invert level of pipe . 250 mm dia NP- 3 Pipe 1x1 3704/300 11.00 3.00 407.44 Mtr 970 2020 0.15 0.15 TOTAL 291.00 sqm 606.00 sqm 291.00 sqm 66.93 Cum 139.38 Cum 206.31 Cum 970 2020 0.3 0.3 0.075 0.075 TOTAL 43.65 Cum 90.90 Cum 134.55 Cum 970 2020 TOTAL 3880 Rmt 4040 Rmt 7920 Rmt 7484.92 cum 19846.19 cum 5924.24 cum 33255.35 cum 7089.27x22% 7089.27 x20 % TOTAL 1559.64 cum 1417.85 cum 2977.49 cum -480.34 cum 5924.24 cum
a)
1x2 13Providing & laying in position cement concrete 1 : 4 : 8 ( 1 cement : 4 course sand : 8graded stone aggregate 40 mm nominal size) in concrete cradle under NP- 3 Pipe of following diameter including centering & shuttering but excluding excavation A.R./GNIDA 250 mm dia NP-3 Concrete cradle
2020/200
11.00
3.00 TOTAL
a)
14-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 16.69
A.R./GNIDA 1X2 1x2 970.00 2020.00 0.375 0.375 0.20 0.20 TOTAL 145.50 Mtr 303.00 Mtr 448.50 Mtr
15-
Providing &laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder 80/100@ 1.20 liad on prepared surface and rolling with 8 - 10 tonne smooth wheeled steel roller.
A.R./GNIDA
TOTAL 16Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 5.00 kg of bitumen for 10 sqm
75714.00 Mtr
MOST/A.R./GNIDA
17-
Providing laying & rolling of close - graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity ,and finishing to required level and gread. MOST/A.R./GNIDA Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. Qty same as item no. -15 75714.0 sqm
18
18.34.1
With F.P.S. brick White washing with lime to give an even shade:
1X20X2 -
TOTAL
1913.37.1
New work (three or more coats) 1x2 1x2 970 2020 0.45 0.45 TOTAL 873.0 sqm 1818.0 sqm 2691.0 sqm
NAME OF WORK:- C/O 448 No G+3 STOREYED HOUSES OF 101.77 Sqm SUPER AREA IN
SECTOR-OMICRON IIIrd GREATER NOIDA
S.no DSR-07 Discription Unit Qty. Rate AMOUNT BASED ON BASED ON DSR-07 AR/GNIDA
Earth work
2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directid ,withen a lead of 50 m.
2.6.1 2.10
All kinds of soil Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth induding consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a Iead of 5Om:
cum
846.0
56.70
47968.20
All kind of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. cum 37.0 301.50 11155.50 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor. metre 0.0 115.05 0.00
cum 2.27
625.0
27.80
17375.00
2.34
2.34.1 2.35.3
litre
202.1
174.30
35226.03
2.35.3.1
E.C.
20%
with
CONCRETE WORK
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : Ggraded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth Sqm REINFORCED CEMENT CONCRETE 110.0 222.65 24491.50
4.1.10 4.17
cum
170.0
2237.75
380417.50
5.33
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete. All work up to floor V level.
up to plinth level Above plinth to floor v level Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. Suspended floors, roofs, landings, balconies and access platform. Shelves (Cast in situ) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Columns, Pillars, Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral-staircases. Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Edges of slabs and breaks in floors and walls. Under 20 cm wide
cum
cum
60.0 1070.0
4147.40
4147.40
248844.00 4437718.00
5.9.16 5.9.16.1
metre
600.0
61.10
36660.00
Weather shade, Chajjas, corbels etc., including edges. Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.
sqm sqm
290.0 50.0
258.60 70.20
74994.00 3510.00
5.22.6 5.28
Kg
148400.0
42.70
6336680.00
Providing and fixing in position 12mm thick bitumen per cm impregnated fibre board conforming to IS: 1838 depth including cost of primer, sealing compound in per cm expansion joints. width per 100m Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour I shade of wall treatment. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 200mm wide.
175.0
334.55
58546.25
5.29
metre
25.0
93.80
2345.00
BRICK WORK
Brick work with F.P.S. bricks of class designation 150 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with F.P.S. bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) Half brick masonry with F.P.S. bricks of class designation150 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Brick tile cladding with an under base of 12 mm thich cement plaster 1:4 ( 1cement : 4 coarse sand ) and fixing tiles as per approved samples with cement paste backing and finishing the grooves with coloured pig ments as per manufactures specification complete sqm 155.0 867.00 134385 sqm 2125.0 302.80 643450.00 cum 662.0 2430.25 1608825.50 cum 67.0 2121.75 142157.25
6.1.2 6.4
6.4.2 6.13
6.13.2 6.15
sqm
2125.0
47.80
101575.00
NS
16.7
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With F.P.S. bricks of class designation150 MARBLE WORK metre 0.0 52.35 0.00
16.7.1
8.2
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
Granite of any colour and shade Area of slab upto 0.50 sqm Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge. sqm 65.00 2575.10 167381.50
8.3.2 8.4
Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size & shape for wash basins? kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. WOOD AND P.V.C. WORK Providing wood work in frames of doors , windows, and clerestory windows and other frames, wrought framed and fixed in position : Kiln seasoned and chemically treated chaap wood
metre
95.0
97.60
9272.00
metre
95.0
106.80
10146.00
8.5
each
48.0
151.00
7248.00
9NS
cum 9.9 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled lSl marked M.S butt hinges with necessary screws. Kiln seasoned and chemically treated Hollock wood 30 mm thick NS Providing and fixing float glass panes 4 mm thick in doors,window and clerestory window shutters .(Area of oppening for glass panes excluding portion inside rebate shall be measured). sqm sqm
14.0
45806.55
641291.70
NS
135.0
2000.58
270078.30
20.0
400.33
8006.60
9.20
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board constwction with frame of 1St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 35 mm thick including ISl marked Stainless Steel butt hinges with necessary screws. Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square. Providing & fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average 1.4 mm with wire of dia 0.63 mm for doors ,windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws.
9.20.2
sqm sqm
250.7 2.20
1415.45 1473.50
354867.47 3241.70
9.20.1 9.24
9.24.1
sqm
30.0
99.90
2997.00
NS Kiln seasoned and chemically treated Marandi wood Providing & fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze of average 1.4 mm with wire of dia 0.63 mm for doors ,windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws.
sqm
102.0
1055.48
107658.96
NS
Kiln seasoned and chemically treated Marandi wood Providing and fixing wooden moulded beading to door and window frames with iron screws plugs and priming coat on unexposed surface etc. complete:
sqm
135.0
945.38 127626.30
NS 2nd class teak wood 35x12 mm 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with MS. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x1 OxI 5cm 1:3:6 mix (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) each 0.0 61.50 0.00 kg 1350.0 64.40 86940.00 metre 2420.0 44.59 107907.80
9.48.2 9.53
9.96
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:
300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm 150x10 mm Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
each each
1.00 160.0
158.50 134.10
158.50 21456.00
each each
451.0 1568.0
62.20 42.75
28052.20 67032.00
125 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
each each
491.0 960.0
48.80 28.35
23960.80 27216.00
9.101.2 9.102
each each
162.0 480.0
53.90 47.55
8731.80 22824.00
9.103
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).
each
16.0
435.90
6974.40
10
STEEL WORK
10.18
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ MS. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia MS. bar bent to shape as per standard drawing.
each 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
96.0
81.20
7795.20
10.25.2 10.26
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S. tube.
kg
2750.0
51.20
140800.00
10.26.1 1111.3
kg
550.0
60.15
33082.50
FLOORING
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. sqm 65.0 192.95 12541.75 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)
11.3.1 11.26
11.26.1 11.25
25 mm thick. Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre
sqm
446.0
694.40
309702.40
sqm 11.27 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. sqm
122.0
122.35
14926.70
40.0
676.75
27070.00
11.36
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
sqm 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. sqm 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
715.0
556.60
397969.00
sqm
135.0
598.65
80817.75
11.39
70.0
759.90
53193.00
11.41.2 11.39
Size of Tile 60x60 cm Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
sqm
135.0
598.65
80817.75
sqm
70.0
759.90
53193.00
11.41
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm sqm 1035.0 1031.85 1067964.75
11.41.2 12
ROOFING
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet lmxlmx400micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. each 9.00 108.00 972.00
12.22
12.41
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter Providing and fixing on wall face uriplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion. metre 125.0 163.40 20425.00
12.41.2 12.42
Coupler 110 mm 110mm bend Shoe (Plain) 110mm Shoe Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 5Ox5Ox5Omm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the waIl etc. complete. each 9.0 263.10 2367.90 each each 9.0 9.0 101.65 134.20 914.85 1207.80
12.43.2 12.44
110 mm Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
each
36.0
96.90
3488.40
each
9.0
23.40
210.60
FINISHING
13.4 12 mm cement plaster of mix:
1:6 (1 cement: 6 coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) 6 mm cement plaster of mix: 1:3 (1 cement: 3 fine sand) Providing and applying plaster of paris putty of 2 mm thickness ov plastered surface to prepare the surface even and smooth complete Making plaster of paires cornice 100 mm as per approved sample and as per direction of Engineer -in -Charge
sqm
3930.0
72.70
285711.00
sqm
3930.0
84.55
332281.50
sqm
3410.0
62.15
211931.50
sqm
1350.0
47.20
63720.00
NS
metre Providing and applying two coats of white based ready mixed putty over plastered surface and grinding the surface smooth with sand paper to get an evenand smooth finish including cost a nd cartage of materials , labour charges, scafolding ,shuttering etc. NS 13.47
1800.0
114.39
205902.00
0.0 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). sqm 1530.0 1390.0
86.99
0.00
13.47.1
60.10 16.55
91953.00 23004.50
13.50 13.50.1
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work French spirit polishing: Two or more coats on new works including a coat of wood filler. 22 WATER PROOFING sqm 30.0 75.60 2268.00 sqm
13.50.3 13.61
sqm
135.0
12.65
1707.75
sqm
1510.0
33.35
50358.50
22.3
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
ii) llnd course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IlIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) lVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) Sqm 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs C) After two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done order and as directed specified the With in average thickness of and 120mm andbyminimum thickness at khurra as 65 mm. Sqm 430.0 541.50 232845.00 250.0 272.50 68125.00
22.7.1
1679355.36
27012146.76
GREATERNOIDA INDUSTRIAL DEVELOPMENT AUTHORITY 169,CHITVAN ESTATE,SECTOR-GAMMA,GREATER NOIDA CITY NAME OF WORK:- C/O 448 No G+3 STOREYED HOUSES OF 101.77 Sqm SUPER AREA IN
SECTOR-OMICRON IIIrd GREATER NOIDA
AMOUNT S.no
DSR-07
Discription
Unit
Qty.
Rate
BASED ON DSR07
BASED ON AR/GNIDA
3696
210.98
779782.08
17.2.1 17.1
448
2152.5
964320.00
17.1.1
448
2304.65
1032483.20
N.S.
896 896
1176 16.45
14739.20
1053696.00
17.29
Each 17.10
17.10.2 Kitchen sink without drain board 17.10.2. 470x420 mm bowl depth 178 mm. 3
each
448.00
2161.55
968374.40
17.28
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
each
448.00
49.10
21996.80
N.S. 18.10
Providing and laying in position cement concrete1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).) alround CI soil and waste of 75 mm thich (A.V) under floor a) 100 mm diameter pipe Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. Internal work Exposed on wall. meter
2352.00
80.00
188160.00
18.10.4 32 mm dia. nominal bore metre 18.10.6 50 mm dia. nominal bore metre
1882.00 2352.00
226.10 342.90
425520.20 806500.80
4233934.6
2021638.08
Concealed work including cutting chases and making good the walls etc., 18.5.2 18.6 PN - 16 Pipe, 20 mm OD Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including trenching refilling & testing of joints complete as per direction of Engineer in Charge. metre
9860.00
153.10
1509566.00
External work 18.6.4 18.15 PN - 16 Pipe, 32 mm OD (SDR 7.4) Providing and fixing brass bib cock of approved quality: each 18.16 Providing and fixing brass stop cock of approved quality: each 18.16.2 20 mm nominal bore each 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore each 18.17 Providing and fixing gun metal gate valve with Cl. wheel of approved quality (screwed end): 18.17.1 25 mm nominal bore 18.29 18.53 Supplying pig lead at site of work. quinal Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confoming to IS:8931 metre
620.00
194.40
120528.00
2464.00
191.70
472348.80
493.00 1344.00
191.70 235.20
94508.10 316108.80
18.18.3
493.00
385.90
190248.70
each
616.00 0.00
285.50 6742.20
175868.00 0.00
18.53.1 15mm nominal bore each 18.74 Providing and fixing unpiasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour.
4032.00
347.65
1401724.80
18.74.2 15mm nominal bore with 45cm length. each 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for per litre tank
0.00
52.90
0.00
224000
5.25
1176000.0
6876010.00
1787762.6 8663772.60
GRAND TOTAL
N.S. 19.2
432.00
650.00
280800.00
19.2.1 19.4
432.00
331.20
143078.40
19.4.3.1 With F.P.S. bricks class designation 150 each 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth induding consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a Iead of 5Om: All kind of soil
230.00
1036.00
238280.00
2.10.1
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre Add 26 % cost index
0.00
115.05
0.00
280800.00
761311.58
1382052.576 /101.77
13580.16
AMOUNT
16957.04
1382052.576 /101.77
13580.16
S.No.
1 2 3 4 CIVIL WORK SAINATARY WORK WATER SUPPLY WORK DRAINAGE WORK Add 2 % contingencies
DESCRIPTION OF WORK
AMOUNT
1688259.17 16420.53 19338.78 1699.36 1725717.83 34514.36 GRAND TOTAL 1760232.19
Prepared by
Technical sanction Accorded for Rs.17.60 lacs ( Rupeees Seventeen lacs sixty thousand only )
O.S.D. (Proj.)
G.M.(Proj.)
G.M.( Plg.)
S.No.
1 2 3 4 CIVIL WORK SAINATARY WORK WATER SUPPLY WORK DRAINAGE WORK
DESCRIPTION OF WORK
AMOUNT
27012146.76 7356395.68 8663772.60 761311.58 43793626.62 875872.53 44669499.15 446.69 LACS
TOTAL
Add 2 % contingencies
GRAND TOTAL
say
Prepared by
MANAGER (WC-4)
Technical sanction Accorded for Rs.446.69 lacs ( Rupeees Four crore fourty six lacs sixty nine thousand only )
O.S.D. (Proj.)
G.M.(Proj.)
G.M.( Plg.)
G.M.(Fin.)
G.M.(Fin.)
GREATER NOIDA
INDUSTRIAL DEVELOPMENT AUTHOURTY
169,CHITVAN ESTATE,SECTOR-GAMMA,GREATER NOIDA CITY
ESTIMATE
NAME OF WORK:- C/O 45.00Mtr & 24.00Mtr. WIDE ROAD IN SECTOR -16 C GREATER NOIDA
YEAR 2010 - 11
316.66
LAC
2-
3-
BUILDING PLANS DETILLED SPECIFICATIONS SHEET IN BUILDING UNDER CONSTRUCTION. N.A. PROVISION OF ELECTRIC AND TELEPHONE LINES IN BUILDINGS. N.A. PROVISION OF SITE DELVELOPMENT . N.A. DURING COMPLETION : PROVISION OF PATRI DRESSING FINISHED CLEANING OF BRICKS & OTHER ROAD CONSTRUCTION MATERIAL.
4-
Yes Yes
5-
IN ELECTRICAL ESTIMATES : ROAD SECTION SHOWING ILL & LL CABLE LUX LEVEL ON INDIVIDUAL ROADS. LOCATION OF POLES LENGTH OF ROADS & DISTANCE OF POLE. N.A. N.A. N.A. N.A.
NAME OF WORK:- C/O 45.00Mtr & 24.00Mtr. WIDE ROAD IN SECTOR -16 C GREATER NOIDA GENERAL ABSTRACT OF COST
S.No.
1
DESCRIPTION OF WORK
Cost of 45m,24M wide Road
AMOUNT
Rs.
0.00
2-
Add 2 % contingencies
Rs.
0.00
Prepared by
ASST.MANAGER (WC-1)
MANAGER (WC-1)
Technical sanction Accorded for Rs.316.66 lacs ( Rs Three crore Sixteen lacs & Sixty six Thousand six thouand only
O.S.D. (Proj.)
G.M.(Proj.)
G.M.( Plg.)
G.M.(Fin.)
NAME OF WORK:- C/O 45.00Mtr & 24.00Mtr. WIDE ROAD IN SECTOR -16 C
GREATER NOIDA
REPORT
THIS ESTIMATE AMOUNTING TO Rs-316.66 LACS BEING THE PROBABLE COST PROPOSED WORK HAS BEEN PREPARED FOR OBTAINING ADMINISTRATIVE APPROVAL AND EXPENDITURE
1- HISTORY As Sector -16C has been proposed in Greater Noida, This Estimate is made to Develop this Sector
2- SCOPE OF WORK FOLLOWING WORK HAVE BEEN PROPOSED IN THIS ESTIMATE (1) 45.00 Mtr. Wide road in secotr 16-C (2) 24.00Mtr. Wide road in sector 16-C as per marked in sector layout by planning deptt.
3- SPECIFICATION :
WORK SHELL BE CARRIED OUT AS PER DSR-O7 /GNIDA & MORTH 4- RATE : BASED ON DSR -07 /AND GNIDA APPROVED RATES 5- METHOD OF EXECUTION : BY CONTRACT THROUGH CALL OF TENDER . 6- T.& P. : ALL THE T & P SHELL BE ARRANGED BY THE CONTRACTOR . 7 - WORK CHARGED ESTABLISHMENT : SHELL BE MET FROM CONTINGENCIES .
8- TIME OF COMPLETION
9- ESTIMATE COST
: 06 MONTH
: RS 316.66 LACS
ASST.MANAGER (WC-1)
MANAGER ( WC-1)
SR.MANAGER (WC-1)
NAME OF WORK:- C/O 45.00M & 24.00M WIDE ROAD IN SECTOR -16C, GREATER NOIDA
S.N. DSR No.
1 2.32
Discription
Clearing grass and removal of the rubbish up to a distance of 50 m Outside the periphery of the area cleared. 45.00 M wide Road 24.00 M wide Road
No.
Qty.
1x1 1x1
1000.00 857.00
45.00 24.00
TOTAL
A.R./GN Earth work in rough excavation,banking excavated earth in IDA layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil Lead upto 8.00 k.m. 16.2 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
73050.89 cum
Qty same as item no. -2 4 MORT construction of granular sub- base by providing corse graded H-401 material ,spreading in uniform layers with motar grader on prepared surface , mixing by mix in place mothed with rotavator at OMC,and compcting with vibratory roller to achieved the desired density ,complete as per MORTH Clause 401 M wide Road 45.00 ADD 2.00% FOR Curve TOTAL 5 MORT Providing ,Laying ,Spreading & compcting graded stone H-406 aggregate to wet mix macadam specification including Premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site ,laying in uniform layers with paver in sub -base / bace course on well prepared surface & compacting with vibratory roller to achieved the desired density 45.00 M wide Road
73050.89 cum
1x2
1000.00
7.80
0.100
1x2x1 1x2x1
1000.00 1000.00
7.50 7.50
ADD 2.00% FOR Curve 6 Supplying and stacking at site. 16.3.1 a) 90mm-45mm size stone aggregate 24.00 M wide Road ADD 2.00% FOR Curve Less for voids 7.5% TOTAL 16.3.2 b) 63mm-45mm size stone aggregate 24.00 M wide Road ADD 2.00% FOR Curve Less for voids 7.5% TOTAL 16.3.3 c)53mm-22.4mm size stone aggregate 24.00 M wide Road 1x1 857.00 7.00 0.10 1x1x2 857.00 7.00 0.10 1x1 857.00 7.30 0.135
599.90
ADD 2.00% FOR Curve Less for voids 7.5% TOTAL 7 16.3.10 Supplying and stacking moorum at site. 24.00 M wide Road 8 16.4 Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road
20% of qty of IInd inter and top coat (1109.82/2 +554.91) cum
226.40 cum
vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening I binding material to fill up interstices of coarse aggregate watering and compacting to the required 24.00 M wide Road density. (DSR-07/16.4/P-240) Qty of Item No. 7(a)+7(b)+7(c)
9 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. 16.7.1 With F.P.S. bricks of class designation 75 45.00 M wide Road 24.00 M wide Road ) 1x2 1x2 1000.00 857.00 TOTAL 10 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 45.00 M wide Road 16.7
2494.87 cum
4.1.8
1X2
1000.00
0.30
0.075 TOTAL
11
6.1 6.1.1
Brick work with FPS bricks of class designation 150 in foundation and plinth in: Cement mortar 1:4 (1 cement, : 4 coarse sand) 45.00 M wide Road 1X2 1000.00 0.23 0.15 TOTAL 69.00 Cum 69.00 Cum
12
13.4
13.4.1 1:4 (1 cement : 4 coarse sand) 45.00 M wide Road 1X2 1000.00 0.15 TOTAL 13 300.00 Sqm 300.00 Sqm
Following Size inculding Carting & loading & unloading at near inculding all takes and laives and rubber rings
19.6.3 250 mm dia. R.C.C. pipe
a) 45.00 M wide Road 24.00 M wide Road 1x2x5 1x2x5 12.50 8.00 TOTAL 13(B) 125.00 Mtr 80.00 Mtr 205.00 Mtr
Laying NP3 R.C.C. S & S Pipes Jointed with shift mixture of cement mortar in the proporation of 1:2 (1 cement:2fine sand) inculding testing of joints Etc.
250 mm dia. R.C.C. pipe
45.00 M wide Road 24.00 M wide Road 1x2x5 1x2x5 12.50 8.00 TOTAL 125.00 Mtr 80.00 Mtr 205.00 Mtr
14
16.69 Providing and laying at or near ground level factory made kerb
stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 45.00 M wide Road
1X2
1000.00
0.345
0.13+0.08/2 TOTAL
15
A.R./GN Providing &laying surface dressing as wearing course in single IDA coat using crushed stone aggregates of specified size on a layer of bituminous binder 80/100@ 1.20 liad on prepared surface and rolling with 8 - 10 tonne smooth wheeled steel roller. 24.00 M wide Road Add 2% for curve TOTAL 1x1 857.00 7.00 5999.00 Sqm 119.98 Sqm 6118.98 Sqm
16
MOST503
Providing and applying Primer coat with bitumen emulsion on prepared surface of granular base inculding cleanning of road surface and spraying primer @ 7.50kg/10Sqm using mechanical (Morth 502)
45.00 M wide Road Add 2% for curve 1x2 1000.00 7.50 15000.00 Sqm 300.00 Sqm 15300.00 Sqm
17
MOST Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 5.00 kg of bitumen for 10 sqm 24.00 M wide Road Qty same as item no. -16 TOTAL 6118.98 Sqm 6118.98 Sqm
18
MOST Providing laying & rolling of close - graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity ,and finishing to required level and gread.
19
MOST503
Bitumen Tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 2.50 kg of bitumen for 10 sqmt.
1x2 Add 2% for curve TOTAL 1000.00 7.50 15000.00 Sqm 300.00 Sqm 15300.00 Sqm
20
MOST- Providing & laying semi-dense bituminous concrete with 100506 120TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bitumen binder CRMB-55 @ 5.0% of mix and filler transporting the hot mix to site, laying with hydrostatic paver finisher with sensor control to the required level, grade and alingment and rolling with smooth, wheeled, vibratory and tandom rollers to achieve the desired compaction as per MORTH specification clause 508 complete in all respects. (25mm thick) MOST/ A.R./ GNIDA 45.00 M wide Road Add 2% for curve TOTAL 1x2 1000.00 7.50 15000.00 Sqm 300.00 Sqm 15300.00 Sqm
21
18.34 Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 18.34.1 With F.P.S. brick 45.00 M wide Road 24.00 M wide Road
1x3x1000/200
TOTAL
1x2x857/200
22
13.37 White washing with lime to give an even shade: 13.37.1 New work (three or more coats) 45.00 M wide Road 1x2 1000 0.45 TOTAL 900.00 Sqm 900.00 Sqm
DSR-07
Amount
Clearing grass and removal of the Per rubbish up to a distance of 50 m Outside 100sqm the periphery of the area cleared. Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil Lead upto 8.00 k.m. Cum Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the Cum maximum dry density (proctor density). Supplying and stacking at site. a) 90mm-45mm size stone aggregate b) 63mm-45mm size stone aggregate c)53mm-22.4mm size stone aggregate Cum Cum Cum Cum
7 8
Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road I vibratory roller 810 tonne in stages to proper grade and camber, applying and brooming requisite type of screening I binding material to fill up interstices of coarse aggregate watering and compacting to the required density. Brick edging in full brick width and half 9 brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With F.P.S. bricks of class designation 75 13(a) Supply of ISI Marked R.C.C. NP3 pipe of Following Size inculding Carting & loading & unloading at near inculding all takes and laives and rubber rings
Cum
Rmt
250 mm dia. R.C.C. pipe 13(b) Laying NP3 R.C.C. S & S Pipes Jointed with shift mixture of cement mortar in the proporation of 1:2 (1 cement:2fine sand) inculding testing of joints tack Etc. coat over painted surface 17 Bitumen including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 5.00 kg of bitumen for 10 sqm 18 MOST/A.R./GNIDA Providing laying & rolling of close graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity ,and finishing to required level MOST/A.R./GNIDA
Rmt
Rmt
Sqm
Sqm
TOTAL
19.6
Providing and laying non-pressure NP3 class (light duty) R.C.C. S & S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 250 mm dia. R.C.C. pipe Description Details of cost for 10 metre MATERIALS Unit Quantity Rate
19.6.2 Code
1701 1715 2281 367 2209 983 2261 123 124 114 101
250 mm dia pipe (in 2 m. length = 5 nos.) Collars 5 Nos. carriage of pipes Cement of 5 joints = 5/2x0.0012 = 0.003 cum =0.0045 tonne Carriage of cement
10.00 5.00 10.00 0.0045 0.0045 0.06 0.06 0.54 0.54 1.37 1.37 1.50 0.17
247.22 0.00 0.00 4 500.00 47.29 600.00 53.21 151.50 141.60 135.25 138.45
coarse sand sand for 5 joint = 0.0024x5/2 = 0.06 cum cum Carriage of sand cum LABOUR Mason 1 st class Mason 2nd class Beldar Bhishti TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost for 10 metre Cost for 1 metre SAY Day Day Day Day
Amount
2472.20 0.00 0.00 20.25 0.21 36.00 3.19 0.00 81.81 76.46 277.94 32.25 528.11 5.28 533.39 80.01 613.40 61.34
348.50
PART - A Discription
S.N. 1DSR No. 2.32 Clearing grass and removal of the rubbish up to a distance of 50 m Outside the periphery of the area cleared. 100 sqm 2Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil Lead 8.00 k.m. cum 307086.99 112.26 164850.00 135.65 UNIT QTY RATE
4-
16.1
Preparation and consolidaton of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and disposal of surplus earth lead upto 50 metres. sqm 65123.94 33.90
5-
MORTH-401 construction of grnular sub- base by providing corse graded material ,spreading in uniform layers with motar grader on prepared surface , mixing by mix in place mothed with rotavator at OMC,and compcting with vibratory roller to achieved the desired density ,complete as per MORTH Clause 401 cum 10112.94 1902.9
6-
MORTH-406 Providing ,Laying ,Spreading & compcting graded stone aggregate to Wet Mix Macadam specification including Premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site ,laying in uniform layers with paver in sub -base / bace course on well prepared surface & compacting with vibratory roller to achieved the desired density
cum 716.7 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres: With FPS bricks of class designation 150 Rmt
14156.33
2079.4
16.7.1
11960.00
52.35
8-
4.1
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 134.55 2449.00
4.1.8
9-
6.1 6.1.1
Brick work with FPS bricks of class designation 150 in foundation and plinth in: Cement mortar 1:4 (1 cement, : 4 coarse sand) cum 12mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand) sqm
206.31
2293.40
10-
13.4 13.4.1
897.00
82.55
A.R.
11-
Supply of I.S.I. marked RCC NP- - 3 pipes of following sizes including ,carting loading ,unlodaing at near including all taxes and laives & rubber rings Mtr Laying NP-3 R.C.C S& S Pipes jointed with stift mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2fine sand )including testing of joints etc. complete . 448.50 287.15
Providing & laying in position cement concrete 1 : 4 : 8 ( 1 cement : 4 course sand : 8graded stone aggregate 40 mm nominal size) in concrete cradle under NP- 3 Pipe of following diameter including centering & shuttering but excluding excavation A.R./GNIDA 250 mm dia NP-3 Concrete cradle Mtr 448.5 169.90
a) 1416.69
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
cum 15Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spaying primer at the rate of 0.75 kg /sqm (Slow Setting )using mechanical means MORTH 502 sqm 16A.R. Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 2.50 kg of bitumen for 10 sqm MORTH 503
448.50
4247.70
58109.40
17.80
sqm 17Providing & laying semi-dense butuminous concrete with 100-120 TPH batch type HMP Producting an average output of 75 tonnes per hour using crushed aggregate of specified grading, premixed with bituminous binder @ 4.50 to 5.00 per cent of mix and filler to achieve desired density. For 25 mm thick MORTH 511
58109.40
5.70
sqm 18Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
58109.40
124.25
18.34.1
Each
45.00
6148.00
1913.37.1
White washing with lime to give an even shade: New work (three or more coats) sqm 2691.00 6.75
GRAND TOTAL
(PART -A ) GRAND TOTAL OF SCHEDULE + N.S.
Rs Rs
UTHORITY
AMOUNT
BASED ON DSR -07 BASED ON A.R/GNIDA
223619.03
34473585.50
2207701.57
19243919.23
29436662.21
626106.00
329512.95
473151.35
74047.35
128786.78
27515.48
76200.15
1905093.45
1034347.32
331223.58
7220092.95
276660
18164.25
NAME OF WORK:- C/O 24 .00M WIDE ROAD IN SECTOR -16 B GREATER NOIDA ( PART - B )
S.N. 1DSR No.
Unit
Qty.
Rate
Discription
2.32 Clearing grass and removal of the rubbish up to a distance of 50 m Outside the periphery of the area cleared. 100 sqm 2Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood bank or filling up ground depressions, all leads as per (MOST /A.R./GNIDA) For all kinds of soil Lead 8.00 k.m. cum Preparation and consolidaton of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and disposal of surplus earth lead upto 50 metres. Road No 1 ,2, & 3 (700.0 + 770.0 + 394 ) sqm Supplying and stacking at site 90mm to 45mm size stone aggregate cum b) C) 616.3.2 16.3.3 16.3.10 Supplying and stacking at site 63mm to 45mm size stone aggregate Supplying and stacking at site 53mm to 22.4mm size stone aggregate Supplying and stacking of moorum at site cum cum cum 1733.18 2462.16 1231.08 517.054 742.30 768.45 810.55 421.85
44736.00
135.65
59552.05
112.26
3-
16.1
13607.20
33.90
4(a)
16.3 16.3.1
7-
16.4 Lying spreading and compacting stone aggregate sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. cum 5426.42 192.55
8-
16.7.1
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres: With FPS bricks of class designation 150 Rmt Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 83.88 2449.00 3728.00 52.35
9-
4.1.8 10-
Brick work with FPS bricks of class designation 150 in foundation and plinth in: Cement mortar 1:4 (1 cement, : 4 coarse sand) cum 12mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand) Sqm 128.62 559.20 2293.40 82.55
A.R. 13
Supply of I.S.I. marked RCC NP- - 3 pipes of following sizes including ,carting loading ,unlodaing at near including all taxes and laives & rubber rings 250 mm dia NP-3 Rmt Laying NP-3 R.C.C S& S Pipes jointed with stift mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2fine sand )including testing of joints etc. complete . Rmt 250 mm dia NP-3
186.40
287.15
a)
19.6.3
186.40
61.35
14Providing & laying in position cement concrete 1 : 4 : 8 ( 1 cement : 4 course sand : 8graded stone aggregate 40 mm nominal size) in concrete cradle under NP3 Pipe of following diameter including centering & shuttering but excluding excavation A.R./GNIDA Rmt 250 mm dia NP-3 Concrete cradle 15Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). A.R./GNIDA cum Providing &laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder 80/100@ 1.20 liad on prepared surface and rolling with 8 10 tonne smooth wheeled steel roller. A.R./GNIDA SQM Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specification no 502 and as per direction of engineer incharge with 5.00 kg of bitumen for 10 sqm MOST/A.R./GNIDA SQM
186.40
169.90
16.69 16-
279.60
4247.70
13308.90
44.80
17-
13308.90
15.10
18Providing laying & rolling of close - graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity ,and finishing to required level and gread. SQM 1913308.90 123.38
18.34.1 2013.37.1
Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With F.P.S. brick Each White washing with lime to give an even shade: New work (three or more coats) SQM
36.00
6148.00
1677.6
6.75 TOTAL
(PART -B ) 24.00 m Wide Road (PART -A ) 60.00 M & 45.00 Wide road
UTHORITY
TER NOIDA
60684.38
6685313.5
461284.08
1044857.07
195160.80
205422.12
294967.93 46161.96
53524.76
11435.64
31669.36
1187656.92
596238.72
200964.39
1642052.08
221328.00
11323.80
DSR-07
Amount
Clearing grass and removal of the rubbish up to a distance of 50 m Outside the periphery of the area cleared. Per 100sqm
Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering ,rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in Lead upto 8.00 k.m. Cum Extra for compaction of earth work in embankme nt under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Cum Supplying and stacking at site.
a) 90mm45mm size stone aggregate b) 63mm45mm size stone aggregate c)53mm22.4mm size stone aggregate Supplying and stacking moorum at site. Laying spreading and compacting stone aggregate of specified sizes to WBM specificatio ns including spreading in uniform thickness, hand picking, rolling with 3 wheeled road I vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of
Cum
Cum
Cum
Cum
Cum
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With F.P.S. bricks of class designation 75 Supply of ISI Marked R.C.C. NP3 pipe of Following Size inculding Carting & loading & unloading at near inculding all takes and laives and rubber rings 250 mm dia. R.C.C. pipe
Rmt
13(a)
Rmt
13(b)
Laying NP3 R.C.C. S & S Pipes Jointed with shift mixture of cement mortar in the proporatio n of 1:2 (1 cement:2fi ne sand) inculding testing of joints Etc.
17
Rmt Bitumen tack coat over painted surface including cost of bitumen including maintence of sides parries and watering then during opration including supply of labour machine ,fuil t & p requird for proper completion of work as per most specificatio n no 502 and as per direction of engineer incharge MOST/A.R./GNIDA Sqm
18
Providing laying & rolling of close graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.09 mm ( Type -a ) or 13.2 mm to 0.09mm (Type -b) aggregate using penetration grade bitumen CRMB -55 to the required line grade and level to same as wearing course on a previously MOST/A.R./GNIDA Sqm
TOTAL
Karan Singh Kapil Dev Singh (ASST. MANAGER) ( MANAGER) (WC-I) (WC-I)