Professional Documents
Culture Documents
1.
Cement -
The rate for cement is inclusive of all taxes, freight charges up to Dealers
Godown, loading and unloading charges. Necessary lead charges (i.e. excluding
loading and unloading charges) as applicable as per conveyance table may be
allowed from the Dealers Godown to the site of work, if duly certified by an officer not
below the rank of Assistant Executive Engineer.
2.
Dealers Godown. Necessary lead charges (i.e. excluding loading and unloading
charges) as applicable as per conveyance table may be allowed from the Stockyard/
Dealers Godown to the site of work, if duly certified by an officer not below the rank
of Assistant Executive Engineer.
However, in the case, if the source is specified as Stockyard the same shall
be decided and approved by the Superintending Engineers concerned.
The above rates for cement and steel are with effect from 01.04.2010 for
adoption in the estimate.
(The above rates is subjected to revision as and when revised by the PWD
authorities)
BUILDING MATERIALS
Sl. No.
3.
a.
b.
4.
Description
Bricks-II Class Table Moulded (Chamber
burnt)
9 x 4 x 3
9 x 4 3/8 x 2
Bricks-II Class (Ground Moulded Chamber
a.
b.
c.
8.
a.
b.
9.
a.
b.
10.
a.
b.
11.
a.
b.
Burnt)
9x4 x3
9x4 3/8 x 2
Bricks-III Class (country bricks, Kiln burnt)
22 x 11 x 5 cm (8 x 4 x 2)
22 x 11 x 5.7 cm (8 x 4 x 2 )
22 x 11 x 7cm (8 x 4 x 2 )
Fly Ash bricks
230 x 110 x 70mm
Bricks country (specially moulded for well
steining
8 x 4 x 2
Perforated Bricks 19 x 9 x 9cm
Terrace Bricks 15 x 7.5 x 2.5cm
Flat Tiles
15cm x 15cm x 12mm
15cm x 15cm x 20mm
Brick Jelly
40mm Size
20mm size
Pressed Tiles
20cm x 20cm x 2cm
23cm x 23cm x 2cm
Pan Tiles
23cm x 8cm x 1.7cm
16.5cm x 8cm x 1.7cm
12.
a.
b.
c.
d.
e.
f.
g.
13.
a.
b.
14.
a.
b.
c.
d.
a.
b.
5.
a
b.
c.
6.
a.
7.
Unit
Rates
(in Rs.)
1000 Nos.
1000 Nos.
3170.00
3085.00
1000 Nos.
1000 Nos.
2760.00
2685.00
1000 Nos.
1000 Nos.
1000 Nos.
1755.00
1830.00
2330.00
1000 Nos.
2480.00
1000 Nos.
1000 Nos.
1000 Nos.
1035.00
1790.00
460.00
1000 Nos.
1000 Nos.
515.00
610.00
cu.m.
cu.m.
308.00
335.00
1000 Nos.
1000 Nos.
6000.00
8500.00
1000 Nos.
1000 Nos.
270.00
223.00
1000 Nos.
1000 Nos.
1000 Nos.
1000 Nos.
Each
Each
Each
6415.00
6540.00
18735.00
3945.00
187.00
29.00
36.00
1000 Nos.
1000 Nos.
8650.00
5510.00
1000 Nos.
1000 Nos.
1000 Nos.
1000 Nos.
11895.00
7030.00
8650.00
13525.00
Sl. No.
e.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24. (A)
a.
b.
24.(B)
25.
26.
27.
28.
29.
a.
b.
30.
31.
32.
33.
34.
a.
b.
c.
35.
a.
b.
c.
d.
e.
f.
g.
i)
Description
Unit
1000 Nos.
Rates
(in Rs.)
10815.00
cu.m.
262.00
cu.m.
cu.m.
Each
cu.m.
cu.m.
cu.m.
cu.m.
228.00
251.00
99.00
68.00
89.00
210.00
228.00
Each
Each
105.00
95.00
Each
cu.m.
cu.m.
cu.m.
73.00
3728.00
2580.00
2840.00
cu.m.
210.00
cu.m.
cu.m.
cu.m.
2710.00
2460.00
3020.00
cu.m.
cu.m.
Each
3020.00
360.00
260.00
Each
73.00
Each
Each
135.00
130.00
Each
Each
Each
Each
Each
63.00
65.00
42.00
52.00
73.00
Each
34.00
Each
84.00
faces
Flooring stone SS size (not less than 10cm
thick)
Stone slab for culvert (3 faces, one line
dressed)
Above 1.2m
Up to 1.2m
Stone slab for culvert (3 faces, Two line
dressed)
For lintel coping (3 faces, Two line dressed)
Bond stones
Kilometre stone 1.65 x 0.45 x 0.15m
Hecta metre stone
0.90 x 0.10 x 0.10m
Sl. No.
ii)
36. a.
Each
Each
Rates
(in Rs.)
61.00
97.00
b.
Each
103.00
Each
97.00
c.
d.
e.
37
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
38.a.
i.
ii.
iii.
iv.
38.b.
i.
ii.
39
i.
ii.
40.
41.
42.a.
b.
43.a.
b.
c.
44.a.
b.
Description
Unit
Each
68.00
Each
50.00
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
240.00
270.00
310.00
360.00
560.00
480.00
780.00
720.00
530.00
360.00
325.00
cu.m.
cu.m.
cu.m.
cu.m.
45.00
40.00
35.00
31.00
cu.m.
cu.m.
58.00
59.00
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
45.00
50.00
58.00
58.00
68.00
110.00
97.00
86.00
63.00
58.00
73.00
Sl. No.
c.
45
46.
47.
48. i)
ii)
iii)
Description
Unit
cu.m.
cu.m.
cu.m.
cu.m.
sq.m
sq.m
sq.m
Rates
(in Rs.)
57.00
110.00
110.00
23.00
270.00
260.00
240.00
cu.m.
cu.m.
cu.m.
890.00
655.00
59.00
cu.m.
76950.00
52.
53.
rafters) Malabar
Teakwood scantlings for tie beams and
cu.m.
75500.00
54.
cu.m.
73500.00
cu.m.
65400.00
cu.m.
cu.m.
81000.00
75200.00
cu.m.
70400.00
cu.m.
67600.00
cu.m.
65800.00
cu.m.
62500.00
cu.m.
61300.00
cu.m.
cu.m.
cu.m.
60150.00
60150.00
56800.00
RM
RM
51.00
41.00
cu.m.
cu.m.
cu.m.
22680.00
23835.00
23835.00
cu.m.
cu.m.
24990.00
10340.00
cu.m.
cu.m.
26090.00
26090.00
49.
50.
51.
55.
56.
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
57.
i)
ii)
58.
i)
ii)
59.
60.
61.
62.
i)
ii)
in length) - Malabar
Teakwood scantlings (below 2m in length )
Malabar
Teakwood planks
Over 45cm wide and 12mm thick.
Over 30cm and up to 45cm wide and 12mm
thick
Over 30cm and up to 45cm wide and 12mm to
25mm thick
Over 30cm and up to 45cm wide and 25mm
to 40mm thick
Over 15cm and up to 30cm wide and 12mm
thick
Over 15cm and up to 30cm wide and 12mm to
25mm thick
Over 15cm and upto 30cm wide and 25mm to
40mm thick
Up to 15cm wide and 12mm thick
Up to 15cm wide and 12mm to 25mm thick
Up to 15cm wide and 25mm to 40mm thick
Teak wood reepers
50mm x 25mm
50mm x 12mm
Country wood Scantlings
Up to 4m in length
Over 4m in length
Country wood scantlings for tie beam and
principal rafter for trusses
Jack wood scantlings up to 4m
Silver Oak scantling
Country wood planks
40mm thick- upto 30cm wide
25mm thick - up to 30cm wide
Sl. No.
iii)
iv)
63.a.
b.
c.
64.
a.
b.
65.
66.a.
Description
40mm thick - over 30cm wide
25mm thick - over 30cm wide
Jack wood planks 25 to 40mm thick
Silver Oak plank 40mm thick
Blue gum plank
Country wood reepers
50mm x 25mm
50mm x 12mm
Mango Plank
Palmyrah rafter (50mm to 60mm wide and
125mm depth)
b.
c.
Palmyrah leaves
Palmyrah leaves (Labour for cutting)
67.
a.
b.
c.
d.
68.
A
B
C
D
E
69.
Casurina Poles
13cm to 15cm diameter
10cm to 13cm diameter
8cm to 10cm diameter
5cm to 8cm diameter
Eucalyptus Poles
13cm to 15cm dia
10cm to 13 cm dia
8 cm to 10 cm dia
5 cm to 8 cm dia
Below 5 cm
Eucalyptus Bullies 4cm to 5 cm dia & cross
70.
71.
i)
ii)
72.
73.
74.a)
b)
75.
76.
i)
ii)
iii)
77.
78.
ties
Casurina bullies 4cm to 5cm dia & cross ties
Bamboo large
10cm diameter and above
7.5cm to 10cm diameter
METAL AND IRON ITEMS
Mild steel plates or sheets BG 10
Mild Steel Angles 25mm x 25mm x 3mm
Binding wire (Black 18G)
Binding wire (Galvanised 18G)
G.I. sheets 30cm wide and 1.6mm thick
Weld mesh
7.5 x 2.5cm, 10 gauge
7.5cm x 5cm, 10 gauge
10cm x 10cm, 10 gauge
Chicken Mesh
Fly Proof Mesh
Unit
cu.m.
cu.m.
cu.m.
cu.m.
cu.m.
Rates
(in Rs.)
26090.00
26090.00
27300.00
11800.00
12000.00
RM
RM
cu.m.
RM
23.00
17.00
11200.00
33.00
100 Nos.
100 Nos.
170.00
27.00
RM
RM
RM
RM
22.00
17.00
13.00
11.00
RM
RM
RM
RM
RM
RM
22.00
16.00
13.00
11.00
10.00
8.00
RM
9.00
RM
RM
8.00
7.00
Kg.
Kg.
Kg.
Kg.
sq.m.
36.50
36.50
38.50
38.50
264.00
sq.m.
sq.m.
sq.m.
sq.m.
sq.m.
258.00
231.00
126.00
28.00
80.00
Note: 1. For Road works, the Schedule of rates of Highways Department may be
adopted, in respect of materials for which rates are not available in this
schedule of rates.
2. For all the materials viz. Bricks and tile products, stone jelly, gravel,
sand, lime stone etc., necessary incidental charges, loading charges,
and unloading charges have been included. Hence no separate
incidental charges, loading and unloading charges shall be allowed for
the above materials.
3.