Professional Documents
Culture Documents
Why use a harmonic filter reactor in a power factor correction capacitor bank?
1. Capacitor are required to improve power factor, and possible system interaction may occur with the installation of a plain capacitor bank. 2. Permissible distortion limits of the local utility or IEEE !1" are e#ceeded, and filters are required to reduced them. $. % combination of 1 & 2 above, whereby capacitor are required to improve power factor and with the addition of the capacitors, permissible distortion limits are e#ceeded.
Benefit of using
De-tuned reactor.
1. Pro lon' the life of power factor capacitor by reducin' overheatin', or fuse failure. 2. Prevent nuisance input fuse blowin' or circuit breaker trippin'. $. (educe over heatin' of transformer. ). (educe the harmonic current in the electrical supply system. !. %ddressin' the harmonic problems created by non linear load such as %*+,s, %C +C converter, +C drives, weldin' m-c etc. ** The use of specific filtering factor requires careful system analysis. As a general rule, filtering factor p=7% is used where imported harmonics from the power source is the main concern.
Specification of
1. .he reactor is desi'ned to be able to handle 1!/0 rated current. 2. 1armonic current handlin' capacity 2for p340 de tuned reactor56 I1 3 1./7 Ic 2 fundamental current 5 I$ 3 1./) # I1 2 $rd harmonic. 5 I! 3 1.$1 # I1 2 !th harmonic. 5 I4 3 1.1$ # I1 2 4th harmonic. 5 I ma# 31.! # I1 $. Inductance tolerance is manufactured to be less than 8 $0, for admissible capacitor tolerance of 8 !0. ). (eactor 9inearity (eactors still have 1//0 of their nominal inductance at 1!/0 of their rated current. .his assures ma#imum filterin' of distortion even in the presence of severe harmonics and best absorption of sur'es. !. :aturation of iron core6 .he reactor will not saturated 2a drop of 1/0 of the inductance value5 at 14!0 of rated current. 7. +esi'n6 comply to IEC 2;". 4. Insulation class Class 1 1;/<C. ;. =peratin' temperature6 "/>C ma#. temperature rise at ambient temperature of )/>C. .hermostat at 1$!>C is fitted to the coil windin's for overload protection. ". .estin'6 Insulation stren'th tested at 2.!k?. 1/.@oise level6 below )/db. reactor will not harm. AAA =ther specification available upon request.
Below apply to p !" reactor to be used with #$#% #&'( capacitor at )*#% #&'( only. AA *ilterin' 0p is only achieved by usin' a detuned reactor with the specified correspondin' capacitor only. Bse of other non matchin' value capacitor with the reactor voids all warranty.
1. (ated volta'e6 Br 3 7//? !/1C. 2. +e tunin' 2filterin' factor56 p34./0 or *res. 3 1;"1C. $. Coolin'6 natural coolin'. E#haust fan may be needed in totally enclosed casin'. ). Protection class6 IP3// 2open type5 !. Installation6 %ppro#imated !/mm 22D5 is needed to adEacent part. .his is due to the ma'netic flu# line caused by the reactor. 7. ?ibration6 (eactor are subEected to vibration due to its ma'netic flu#. :tron' support and sometimes vibration pad may be needed.
P./ma01 Watt ;/ 1/; 114 12/ 1!! 17/ 14/ 14! 1;/ 1;! 2/! 22/ 2)/ 2;/
2 mm 22! 22! 22! 22! 2// 2// 2// 2!! 2!! 2!! 2!! 2!! $1/ $$!
B mm 21/ 21/ 21/ 21/ 2)/ 2)/ 2)/ $/7 $/7 $/7 $/7 $/7 $/7 $;/
+ mm 1$/ 1$$ 1$; 1)/ 1)/ 1)! 1!! 21/ 2$! 2)! 27/ 2"/ $$/ $$/
D mm 74 7" 4) ;/ ;4 1// 1/$ 11$ 12$ 1$4 1!$ 1;2 2!) 2")
3 mm 117 117 117 117 1$7 1$7 14/ 14/ 14/ 14/ 14/ 14/ 1!$ 17;
'-holes mm 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 12 12
Design type .ype % .ype % .ype % .ype % .ype F .ype F .ype F .ype F .ype F .ype F .ype F .ype F .ype C .ype C