Professional Documents
Culture Documents
They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1646-1811, Rev 0. A4 297 x 210.
ITEM NO.
DESCRIPTION
1 2 3 4 5 6 7 8 9 10 11
03-VV-00-041 04-VV-00-042 05-CC-00-507 05-CC-00-505 05-VV-VI-505 05-VV-VI-506 05-VV-VI-525 05-VV-VI-526 05-VV-VI-527 20-V-101 20-V-102
PREFRACTIONATOR REFLUX DRUM VENT GAS CAUSTIC SCRUBBER LPG AMINE TREATER KEROSENE STRIPPER CAUSTIC WASH TOWER SAND FILTER PRE FLASH DRUM AMINE WASH WATER BREAK TANK SOUR GAS KNOCKOUT DRUM HYDROPROCESSING SOUR WATER SURGE DRUM HYDROSTRIPPER REBOILER CONDENSATE POT CLOSED BLOWDOWN DRUM ACID GAS KO DRUM SWS ACID GAS KO DRUM I CONVERTER 2nd CONVERTER 1 /2 AND FINAL CONDENSER SEAL POTS
st nd st
1 1 1 1 1 1 1 1 1 1 1
H V V V V V V V V H V
SADDLE ANGLE LEG SKIRT SKIRT SKIRT SKIRT SKIRT ANGLE LEG ANGLE LEG SADDLE ANGLE LEG BURRIED SKIRT SKIRT SADDLE SADDLE BRACKET
3832 1212 1156 2324 1256 1256 2232 412 1124 2228 457
14850 2400 18000 10400 6100 4200 11800 1500 2400 6900 2070
* * * * * * * * * * *
Refer Note 1 Refer Note 1 Refer Note 1,2 Refer Note 1,7 Refer Note 1
Refer Note 2
Refer Note 1 Refer Note 9 WITH SUMP OF 624 O.D.X560 Ht. Refer Note 1,2 Refer Note 3,10, 11 Refer Note 3, 11
12 13 14 15 16 17
1 1 1 1 1 3
H V V H H V
* * * * * *
B A
NO
11.11.08 21.04.06
DATE
TK AT
BY
KA RKT
CHK
AKM AKM
APPD
REV B
The drawing, design and details given on this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1646-1811, Rev 0. A4 297 x 210.
SL. NO.
ITEM NO.
DESCRIPTION
QTY. (Nos.)
SUPPORT TYPE
OUTSIDE DIA.(mm)
TL TO TL (mm)
OVERALL LENGTH (mm) 8600 1000 22400 24800 3940 9800 4260 11850 30000 2500
UNIT ERECTION WT.(Kgs) Only) 2650 100 (For 1 No. Eqpt. Only) 29000 30500 3100 7400 1350 33400 516000 (For 1 No. Eqpt. Only) 650 (For 1 No. Eqpt. Only) 650 (For 1 No. Eqpt. Only) 650
APPLICABLE REMARKS
18 19 20 21 22 23 24 25 26
25-LZ-102 25-LZ-103 A/B/C 26-C-101 26-C-102 26-V-101 26-V-102 26-V-103 26-R-101 72-R-003/004
DEGASSING SEAL POT 1 /2 AND FINAL CONDENSER SEAL POT LOOK BOXES QUENCH COLUMN ABSORBER HYDROGENATION REACTOR PREHEATER FLASH DRUM REGENERATOR REFLUX DRUM REGENERATOR REBOILER CONDENSATE POT HYDROGENATION REACTOR HDT REACTOR 1ST TRAIN /2ND TRAIN QUENCH WATER FILTERS RICH SOLVENT FILTERS LEAN SOLVENT FILTER
st nd
1 3 1 1 1 1 1 1 2
V V V V V V V H V
BRACKET SKIRT SKIRT PIPE LEG SKIRT ANGLE LEG SADDLE SKIRT ANGLE LEG ANGLE LEG ANGLE LEG
416 220 2778 3320 960 1828 1016 3736 4528 406
8600 1000 14000 16300 2000 5600 2600 10000 19000 1575
* * * * * * * * * Refer Note 3, 10, 11 Refer Note 6, 8, 11,13,14,15,16 Refer Note 1,12 Refer Note 1,12 Refer Note 1,12 Refer Note 1,2 Refer Note 1, 11 Refer Note 1,2
27
26-G-101 A/B
2 2 1
V V V
* * *
28 29
406 406
1575 1575
2500 2500
30
26-G-104
406
1575
2500
650
31
04-GF-00-105 A/B
HVGO IR STRAINERS
406
1575
2500
B A
NO
11.11.08 21.04.06
DATE
TK AT
BY
KA RKT
CHK
AKM AKM
APPD
REV B
The drawing, design and details given on this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1646-1811, Rev 0. A4 297 x 210.
SL. NO.
ITEM NO.
DESCRIPTION
QTY. (Nos.)
SUPPORT TYPE
OUTSIDE DIA.(mm)
TL TO TL (mm)
APPLICABLE REMARKS
32 33 34 35 36 37 38 39 40
FEED FILTER WASTE HEAT EXCHANGER STEAM DRUM SILENCER FIRST STAGE SUCTION DRUM SECOND STAGE SUCTION DRUM THIRD STAGE SUCTION DRUM HYDROPROCESSING SOUR WATER STRIPPER DEGASSING CONTACTOR SOLVENT REGENERATOR FEED COALESCER DE-ETHANIZER REBOILER CONDENSER POT MP -CONDENSATE FLASH DRUM LEAN SOLVENT CARBON BED
1 1 1 1 1 1 1 1 2
V V V V V V V V H
SKID MOUNTED ANGLE LEG ANGLE LEG ANGLE LEG SKIRT SKIRT SKIRT SADDLE ANGLE LEG PIPE LEG SKIRT
L=12000 X W =3000 X H=3000 1000 813 813 813 2122/1590 2024 2224 1536 2000 2500 2500 2500 32400 7900 27800 7800 2000 3800 3800 3800 38300 14050 36050 8400(approx)
20000 1000 1900 2700 3900 34000 18200 33100 10000(for one equipment only) 1800 3600 10850
* * * * * * * * *
Refer Note 12 Refer Note 12 Refer Note 1,2 Refer Note 1,2 Refer Note 1,2 Refer Note 1 Refer Note 1,2, 3,11 Refer Note 1 Refer Note 2,12
41 42 43
1 1 1
V V V
* * *
NOTES :
1. 2.
Erection of vessels/ columns includes pipe davit (supplied loose by others). Installation of demisters/V-Profile Screens in vessels / columns (supplied loose by others) wherever specified in REMARKS column shall be carried out as per instructions of Engineer-in-Charge. B A
NO
11.11.08 21.04.06
DATE
TK AT
BY
KA RKT
CHK
AKM AKM
APPD
REV B
The drawing, design and details given on this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1646-1811, Rev 0. A4 297 x 210.
Installation of grating in vessels / columns (supplied loose by others) wherever specified in REMARKS column shall be carried out as per instructions of Engineer-inCharge. Grating details shall generally be as per attached vessel design data sheets. Erection contractor shall carry out other minor works, such as tack welding of washers above anchor chairs and any other work required to complete the job as per instruction of Engineer-in-Charge. H - Horizontal ; V - Vertical The lifting of Reactor shall be carried out by lifting cover on top flange. Loading & Procurement of sand shall be carried out as per instructions of Engineer-in-Charge. The specification & quantity shall be as per Engg. Datasheet enclosed in the Tender. Installation of reactor bed thermocouples, skin point thermocouple, removal of temporary attachments & wedges for transportation, liquid penetrant test at all local removal points and installation of loose internals (if any) shall be carried out under Reactor suppliers supervision and as per instructions of Engineer in Charge RCC Pit shall be filled with sand, packed with vibro compression and 100 mm lean concrete shall be provided on top as per instructions of Engineer-in-Charge. The equipment shall be refractory lined (Refer spec. 6-79-0008) as per instructions of Engineer-in-Charge. Loading of Packing/Catalyst/Alumina/Ceramic balls in the equipment shall be carried out as per instructions of Engineer-in-Charge. The dimensions, details and weight are approximate only. Final data shall be given later. Contractor to submit the erection scheme for individual reactors and get the same approved by EIl/IOCL prior to the erection. Removal of necessary structures at all elevations to facilitate erection of the reactors and reinstallation of the same (including painting/touch-up for damages, if any) after erection is to be carried out by the contractor. Hard stand, if required, is to be prepared by the contractor. The superstructure around the reactors to be installed is already in position. The same shall be considered while selecting the Crane capacity for reactor installation. The contractor, if required , to visit the site in advance (before award of contract) to get himself acquainted about the actual constraints regarding the above.
B A
NO
11.11.08 21.04.06
DATE
TK AT
BY
KA RKT
CHK
AKM AKM
APPD
REV B
The drawing, design and details given on this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1646-1811, Rev 0. A4 297 x 210.
BIDDER TO NOTE THE FOLLOWING FOR SOR NO. 6698-03-16-46-SR-06A, APPLICABLE EQUIPMENTS TAG NO. START WITH 03 OR 04 FOR SOR NO. 6698-05-16-46-SR-06B, APPLICABLE EQUIPMENTS TAG NO. START WITH 05 FOR SOR NO. 6698-25-16-46-SR-06C, APPLICABLE EQUIPMENTS TAG NO. START WITH 20,25 OR 26 FOR SOR NO. 6698-72-16-46-SR-06E, APPLICABLE EQUIPMENTS TAG NO. START WITH 72 FOR SOR NO. 6698-78-16-46-SR-06D, APPLICABLE EQUIPMENTS TAG NO. START WITH 78
B A
NO
11.11.08 21.04.06
DATE
TK AT
BY
KA RKT
CHK
AKM AKM
APPD
REV B