You are on page 1of 8

OPERATING LIMITS

Flow rates up to: 25 m3/h Head up to: 70 m CE Max. operating pressure: 10 bar Max.suction pressure: 6 bar Temperature range: 15 to + 110C Max. ambient temperature: + 40C ND of ports: G11/4 to G2

MULTi-H
STAINLESS STEEL MULTI-STAGE HORIZONTAL PUMPS 2 pole - 50 Hz 2 ranges: stainless steel 304 and 316L

240 70 H m MULTi-H MULTi-V

APPLICATIONS
Pumping of clear non-loaded fluids in the housing. agricultural and industrial sectors: Conveyance - Overpressure Sprinkling - Irrigation Washing station Draining - Filling (ponds, pools, etc.) Heating - Air conditioning Water treatment (demineralization, filtering, etc.). And incorporation in all modular systems. Catchment from a well, spring, river, pond, etc. Pumped fluids: 304 range: clear non-aggressive liquids (drinking water, glycol water, etc.). 316L range: aggressive liquids (sea water, demineralized water, chlorinated water, etc.).

25

3 Qm/h

100

Hydraulic assembly ALL STAINLESS STEEL

MULTI-H with single-phase motor

MULTI-H with three-phase motor

N.T. No 141-1/ENG - Ed.6/05-05

MULTi-H

ADVANTAGES
Monobloc pump, compact, economical and silent. Hydraulic assembly in stainless steel: anti-corrosive safety and increased pump service life. Motor rolling bearing fitted in the front endshield, amply dimensioned and leaktight. Suction rings between very thick cellsinsensitive to thermal expansion, elimination of risks of seizing up. Maximum reliability - high efficiency due to impeller profile limiting the number of stages, shaft size and axial thrust. Standardized mechanical seals, +110C maximum, maintenance free. Easy installation.

HYDRAULIC PRESELECTION CHARTS


Imp.gpm Hm

10

15

20

30

40

50

70 60 50

MULTi-H
2 POLE-50 Hz

Hft

200

150 40

30

100

MULTi-H200
20

MULTi-H400 MULTi-H800 MULTi-H1600


75

15

50

DESIGN
Hydraulic part ALL STAINLESS STEEL Horizontal, centrifugal, not self-priming. Multi-stage from 2 to 6 stages. Axial suction, vertical discharge upwards. Impellers mounted directly on the motor shaft extension. Shaft leaktightness by standardized mechanical seal. Hydraulic assembly mounted at 8 points on a lantern bracket. Motor Standard ventilated. Extended shaft end. Single-phase motor with integrated thermal protection, automatic reset. Capacitor incorporated in the terminal box. Guiding rolling bearings of the impeller shaft lubricated for life. Speed of rotation Windings three-phase Single-phase Frequency Insulating class Protection index : 2900 rpm : 230-400 V : 230 V : 50 Hz (option 60 Hz) :F : IP 54
10
Qm3/h Ql/min Ql/s

1 30 0.5

2 40

3 50 1

4 70

5 1.5

6 100 2

10 150 3 200 4

25 400

STANDARD CONSTRUCTION
Main parts Materials non-aggressive aggressive liquids liquids Body casing 304 st. steel 316L st. steel Impellers 304 st. steel 316L st. steel Cells (stage shell) 304 st. steel 316L st. steel Pump shaft 316L st. steel 316L st. steel Cell centring 304 st. steel 316L st. steel Mecanical seal Carbon/ Tungsten carbide/ Ceramic Carbon Orings EPDM Ethylene Propylene VITON Plugs 316L st. steel 316L st. steel Fixing-support bearing Aluminium Aluminium * Except MULTi-H1600 series
NB: 304 stainless steel (X5CrNi18-10) or 316L stainless steel (X2CrNiMo17-12) recommended materials offering very considerable resistance to corrosion. Clean, clear, fibreless liquids conveyed and only slightly loaded in sand/silica (40g/m3 maximum concentration).

PUMP IDENTIFICATION

MULTi-H 206 -

SE-M XV-T
T : Three-phase motor M : Single-phase motor E : EPDM V : VITON S : 304 Stainless steel X : 316L Stainless steel Nomber of stages Niminal flow in m /h Pump code STAINLESS STEEL MULTI-STAGE HORIZONTAL
3

MULTi-H

SECTION DRAWING

1111

6521

4610A

1160

1150

2250

2410

2520 9902A 4610C

4213

9860

9825

9460 3011A 9944

9822

9820 9902C

POMPE 6 PUMP TAGES 6 STAGE

4 STAGE POMPE 4 PUMP TAGES

9902B 9942

2911

6515 4610B 2460A 1154

6545 2460B 4220 4240

3180

2540 3011B 8110

9220 9966

3134

6571

9831

MECHANICAL SEAL

PARTS LIST
1111 - Pump casing 1150 - Stage casing with return vane 1154 - Stage centring 1160 - Stage casing without return vane 2250 - Impeller 2410 - Impeller spacer 2460 A - Impeller adjusting washer 2460 B - Mechanical seal tapered ring 2520 - Impeller back-up ring 2540 - Thrower 2911 - Shaft end washer 3011 A - Rolling bearing - fan side 3011 B - Rolling bearing - pump side 3134 - Motor support foot 3180 - Lantern bracket 4213 - Ring casing 4220 - Rotating part Mechanical 4240 - Stationary part seal 4610 A - Round section joint ring (filling cap) 4610 B - Round section joint ring (draining cap) 4610 C - Round section joint ring (lantern casing bracket) 6515 - Draining cap 6521 - Purging and filling cap 6545 - Circlip (back-up ring) 6571 - Motor tie bolt 8110 - Electric motor casing 9220 - Impeller shaft 9460 - Terminal cover seal 9820 - Fan 9822 - Fan cover 9825 - Motor terminal cover 9831 - Motor rear bearing 9860 - Capacitor 9902 A - Lantern casing bracket screw 9902 B - Shaft end screw 9902 C - Cle aning screw 9942 - Fan-type washer 9944 - Spring washer 9966 - Elastic pin

4220

4240

() Recommended spare parts

MULTi-H

HYDRAULIC PERFORMANCE 200 AND 400 SERIES

Imp.gpm 80 Hm 70 206

13

17

Imp.gpm
80

15

22

29

MULTi-H200 2 POLE - 50Hz

Hft

Hm
70 406

Hft

MULTi-H400 2 POLE - 50Hz

60 205

200

60

200 405

50 204 40 203 30 202 20 50 10 100 150

50 404 40 403 30 402 20 50 10 100 150

0 50 40 30 20 10 0 1.0 0.8

Qm3/h
%

6
NPSH

Qm3/h 1
%

9
NPSH

m 8 6 4

(20

5)

60 40 20

) 405

m 6 4 2

NPSH (205)

2 0 0 1.5 3 4 5 206 1.2 205 0.9 204 203 202 0.6 0.3 0.0 6

NPSH (405)

Qm3/h
kW

Qm3/h 1
kW

406 405 404 403 402

0.6 0.4 0.2 0.0

Qm3/h

Qm3/h 1
Ql/min 25 Ql/s 0.2

Ql/min 0.2 Ql/s

30 0.6

50

70 1.1

90
1.5

50 0.6 1.1

75 1.5

100 1.9

125 2.3

Hydraulic performance at actual speed


4

MULTi-H

HYDRAULIC PERFORMANCE 800 AND 1600 SERIES

Imp.gpm Hm 55 50
804

20

30

40

50

Imp.gpm 20 Hft Hm 55 50
1604

40

60

80

100

805

Hft

MULTi-H800 2 POLE - 50Hz

180

MULTi-H1600 2 POLE - 50Hz

180

160

160

45 140 40 35
30 25 802 20 803

45 140 40 120 35 30 25 20 60 15 40 40 10 20 5 0 Qm 3 /h 4 80 60 40 20 0 Qm 3 /h 4
kW

1603

120

100

100

80

1602

80

60

15
10

5
0

20

Qm 3 /h 2 80 60 40 20 0 Qm 3 /h 2 2.0 1.5
kW

5
)

10 11 12 13 14 15 16 m
NPSH

12

16

20

24

28
NPSH

32 m

%
02 % (8

%
603 % (1 )

6 4

6 4

NPSH (802) 3 4 5 6 7 8 9

2 0 10 11 12 13 14 15 16

NPSH 1604
8 12 16 20 24 28

2 0 32

805 804

2.5 2.0 1.5 1.0 0.5


1604 1603 1602

1.0 0.5 0 Qm 3 /h 2 Ql/min Ql/s 3


50 1

803 802

0 4 5 6
100 2

9
150

10 11 12 13 14 15 16
200 3 250 4

Qm 3 /h 4 Ql/min Ql/s
100 2

12
200

16
300 4

20

24
400 6

28
500 8

32

Hydraulic performance at actual speed


5

MULTi-H

SECTIONAL VIEW OF THE INSTALLATION


Suction pump Maximum suction head (Ha) and minimum pump head (Hc) at nominal pump flow rate. Fluid temperature + 20C + 50C + 80C + 110C MULTi-H 200 MULTi-H 400/800/1600 Ha mCL Hc mCL Ha mCL Hc mCL 7 --7 --6 --6 --2.2 --3 ----8.1 --7

MIN.

High level Ha

These figures do not take into account load losses in the suction duct.

Low level min . 0.70m 0.10m Strainer foot valve

On-load pump on storage tank or town water network (with dry running protection kit)

Strainer

Hc

Town water

MULTi-H

ELECTRICAL DATA AND DIMENSIONS


3~ filling 1/4 NDD** H 3 ph. 9 9 45 52 L2 L 108 190 24 24 draining 1/4 8.5 L1 L3 1~ 106 3~ 1~

H2

NDS*

H1

* suction ** discharge

ORDER REFERENCE

MOTOR P2 kW 1x 3x 230 V 230 V 3.8 3.8 3.8 4.8 6.3 3.8 3.8 4.8 6.3 9.5 4.8 6.3 9.5 2.8 2.8 2.8 3.1 4.5 2.8 2.8 3.1 4.5 6.1 3.1 4.5 6.1 8.0 6.6 8.55 10.1 3x Capacitor 400 V F 1.6 1.6 1.6 1.8 2.6 1.6 1.6 1.8 2.6 3.5 1.8 2.6 3.5 4.6 3.8 4.95 5.85 12 12 12 16 30 12 16 16 20 30 16 20 40 Ports L suction discharge NDA NDR mm G1 G1 G1 G1 G1 G11/4 G11/4 G11/4 G11/4 G11/4 G11/2 G11/2 G11/2 G11/2 G2 G2 G2 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G11/4 G11/4 G11/4 472 G11/4 G11/2 G11/2 G11/2 472 477 477 515 375 375 423 423 472 447 375 375 423 448 423 472 472 387 412 387 H mm 216 192 216 192 216 192 216 192 224 192 216 192 216 192 216 192 224 192 224 206 216 192 224 192 224 206 206 206 206 221

PUMP H1 mm 90 90 90 90 90 90 90 90 90 90 90 90 90

Mass L1 mm 205 205 253 253 277 205 205 253 253 277 217 217 277 L2 mm 88 88 88 88 104 88 88 88 88 104 83 104 104 88 104 88 104 277 236 236 236 104 104 104 137 182 138 138 138 L3 mm 110 110 158 158 182 110 110 158 158 182 122 122 182 kg 09.8 08.9 09.8 08.9 10.6 09.7 12.2 11.3 15.7 12.9 09.8 08.9 10.7 09.8 12.2 11.3 15.2 12.9 17.8.0 15.2 15.8 10.6 14.5 12.2 16.0 15.8 17.0 15.3 17.16 21.1

MULTi-H202-M MULTi-H202-T MULTi-H203-M MULTi-H203-T MULTi-H204-M MULTi-H204-T MULTi-H205-M MULTi-H205-T MULTi-H206-M MULTi-H206-T MULTi-H402-M MULTi-H402-T MULTi-H403-M MULTi-H403-T MULTi-H404-M MULTi-H404-T MULTi-H405-M MULTi-H405-T MULTi-H406-M MULTi-H406-T MULTi-H802-M MULTi-H802-T MULTi-H803-M MULTi-H803-T MULTi-H804-M MULTi-H804-T MULTi-H805-T MULTi-H1602-T MULTi-H1603-T MULTi-H1604-T

0.55 0.55 0.55 0.75 1.10 0.55 0.55 0.75 1.10 1.50 0.75 1.10 1.50 1.85 1.50 1.85 2.50

90 90 90 90 100

H 1 ph.

104

MULTi-H

ACCESSORIES

FEATURES
a) Electrical - T types: Three-phase 230-400 V - 50 Hz - M types: Single-phase 230 V - 50 Hz with capacitor integrated in terminal box. - Motor protection by overload cut-out essential for three-phase motor. - Connections to the motor terminal by stuffing-box. b) Installation - On the solid base with fixing by foundation bolts. - Suction pump assembly with compulsory strainer foot valve, or on-load pump on storage tank or on town water network with protection system against lack of water. - Pump connection through flexible or rigid piping. c) Packaging Pump supplied in cardboard packaging, without connection accessories. d) Maintenance Replacement of recommended spare parts () subject to wear and tear.

Three-phase motor protection overload cut-out

ACSON: ON/OFF control device and protection against lack of water

Strainer foot valve

Check valve

Shut-off valve

Anti-vibratory sleeves

OPTIONS & ACCESSORIES


Shut-off valves Check valves Strainer foot valve Anti-vibratory sleeves Suction kit Bladder or galvanized tanks Water hammer tanks ME dry running protection kit ACSON: ON/OFF control device and protection against lack of water 3-phase overload cut-out motor protection, etc.

Water hammer tank

Bladder tank

8 53 bd de la Rpublique - Espace Lumire - Bt. 6 - 78403 Chatou Cedex FRANCE Tel: +33 (0) 820 873 624 - Fax: +33 (0)1 30 09 82 34 - www.salmson.com

You might also like