You are on page 1of 61

Vol.

06

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

CONTENTS
Precautions Before Use Notes on Design Notes of Caution on Handling and Usage Terms and Definitions High-B Compound Standard Material Characteristics High- Compound Standard Material Characteristics E Type Ferrite Cores FEI-Type Cores FEE-Type Cores FEER Type Ferrite Cores FEER-Type Cores FPQ Type Ferrite Cores FPQ-Type Cores FQK Type Ferrite Cores FQK-Type Cores FEP Type Ferrite Cores FEP-Type Cores P Type Ferrite Cores P-Type Cores RM Type Ferrite Cores RM-Type Cores Toroidal Cores BH2 Compound Technical Data 3 3 4 5 8 11 12 13 15 16 17 18 19 20 21 23

Ferrite Cores VOL.06

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 4

Precautions Before Use


Notes on Design
1) When selecting the material and shape for the ferrite core, strictly observe the limits given in the catalog (product manual) regarding such things as the L value, maximum saturation, magnetic flux density, and core loss. 2) Select a ferrite core having temperature and frequency properties for the core loss that meet the demands of the equipment to be used. 3) Abnormal heat release may result if used under high frequencies or in strong magnetic fields. Select a ferrite core that has the appropriate properties such as a low core loss. 4) In an environment where the Curie point is exceeded, the ferrite core may lose its intrinsic properties, causing the equipment to malfunction. Use only in a temperature range that stays below the Curie point. 5) Give careful consideration to the balance of the ferrite core's thickness when designing a shape. 6) When designing a bobbin, set measurements and select bobbin materials that meet the requirements (frame class, thickness, HWI, HAI, HVTR, CTI, and D495) of safety standards such as UL. 7) Working on the coil could destroy the ferrite core owing to the coil's thickness or damage the coil itself, so designs should provide adequate clearance between the core and coil. 8) For inserting the ferrite core into a case, designs should provide adequate clearance between the core and case. The core may break unnecessary force is applied. 9) The insulation resistance of the ferrite core is not high. Do not use it as an insulator. Also, do not use it for other purposes (such as electrical circuit element). 10) For ferrite cores that have low resistivity such as Mn-Zn cores, make sure to provide sufficient insulation with insulation protection covers and tape, etc. 11) When resins such as adhesives, saturants, and coatings are used, excessive stress may arise in the ferrite core owing to the difference in coefficients of thermal expansion, resulting in the core breaking. It is best not to use such resins, but if their use cannot be avoided, use one with a coefficient of thermal expansion that is close to that of the core. In addition, select non-corrosive resin for the core and members to be used.
Ferrite Cores VOL.05
Ferrite Cores VOL.06
3

12) Take note of the following information when selecting members (bobbin, metal fittings, tape, adhesives, saturants, and coatings) to use in combination with the ferrite core.
1 2

Members that do not corrode or react. Members with coefficients of thermal expansion as close as possible to ferrite. Members that do not add thermal shock (such as casting chemicals). Members that can withstand transformer heat genera tion, and particularly those that do not were down wires.

13) The coefficients of thermal expansion for the ferrite core and bobbin differ greatly. Securing the core and bobbin with saturants and adhesives will cause the bobbin to expand from heating when the adhesive hardens or heat release during operation. This will place stress on the core, possibly causing it to break. Allow sufficient clearance between the core and bobbin.

14) When there is unbalance from a circuit being split two or more times, the flux will concentrate on the side where the flow is the easiest and may result in abnormal heating and even fire.

15) When a bifilar wiring is made by, for example, a wire container, and the wire gage and length is different or the number of coils are different, the electrical current will tend to flow in only the easiest way, resulting in heating and fire. 16) Designs should keep abnormal current resulting from a problem in another circuit from flowing into the transformer.

17) When used as a transformer, heat will be released. Designs should ensure that surrounding parts will not deteriorate or be destroyed by that heat.

18) Regarding equipment where the user is able to touch the core, make sure to provide extensive warnings and instructions to the user so they will not get shocked or burned by touching the core.

19) Since leakage flux may cause equipment to malfunction, check in advance for its effects on the equipment you are using and ueardy equipment, and then take the appropriate actions.

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 5

Notes of Caution on Handling and Usage


1) The ferrite core is a sinter. Make sure to handle it carefully as it has low tolerance for impact such as being knocked or dorpped, which may cause it to break or chip. Using it without realizing that it is broken will result in degradation of its properties and heat release. In addition, chipped fragments may result in injury or even get into the eye. 2) The ferrite core is a magnetic substance. When there is a strong magnet nearby, the core will be quickly attracted to it, and there is the possibility that the core will be destroyed by the impact. There is also the danger that a finger or the like may be crushed between the two. 3) The ground surface of the ferrite core has sharp edges because it is not beveled so as to prevent decreased performance. In addition, there may be a minute amount of burr. Carelessly touching it may lead to injury. 4) Do not apply force to the ferrite core beyond the prescribed amount. Otherwise, the core may break or chip the core. 5) Do not allow the ferrite core and jigs or two cores to collide. Failing to observe this may destroy the core(s). 6) When securing the ferrite core, do not apply stress beyond the necessary amount. Failing to observe this may break or chip the core, reducing its properties. 7) Do not expose the ferrite core to rapid temperature extremes (thermal shock). Failing to observe this may break or chip the core. 8) When performing molding or such, the core may break or chip on account of rapid changes in humidity and expansion differences between resins. Carefully evaluate the materials you iutend using. 9) There are some ferrite cores that are heavy. Packing boxes may fall over if stacked too high. Limit the height when stacking them. 10) There are some ferrite cores that are heavy. backache. 11) Since there is the possibility of damage by vibration, falling, or other sources of physical shock when transporting ferrite cores and transformers that use these cores, take care to provide adequate packing to prevent such damage.
Ferrite Cores VOL.06

12) The ferrite core should be kept away from rapid temperature changes, corrosive gases, dust, and humidity. Care should also be taken to isolate it from vibration when transporting and storing it. 13) Impact may cause the inductance of ferrite cores to change. 14) If the ferrite core is magnetized once by a strong magnet, it may lose its prescribed properties. 15) If the ferrite core is used for a coil, wrap the wire with the tension appropriate for the core's thickness and the tapering shape. Applying tension beyond the prescribed amount when wrapping the coil may break or chip the core. 16) When the ferrite core is directly used for a coil, the wire may be damaged by the burr on the core's surface, resulting in a short circuit. Select a core that has had its burr removed or has been coated. 17) When the ferrite core is directly used for a coil, the wire may be damaged by tension or friction, resulting in a short circuit. The wire may also be damaged by kinks or the jigs and tools used when adjusting the transformer. Take adequate care when performing work. 18) When wrapping a coil or during assembly, adjust the equipment so that the core is not struck hard and no excessive stress is applied, and make sure to handle it as delicately as possible. 19) The ferrite core should not be placed in the mouth. Make sure to keep it away from young children. 20) Use the ferrite core under normal temperatures and in normal surroundings. 21) If core fragments or other debris get in the ferrite core's ground surface, inductance will lower and howling will result. 22) When cutting the ferrite core, take measures to prevent injury such as providing a cover or protector so that debris and chips will not fly in all directions. In addition, note the following information to prevent the core from breaking or chipping.
1

When

Select a grindstone with the properties for the core's quali ties. Adjust cooling agents and their conditions (amount, tem perature, and quality). For shapes that require a large amount of grinding, do not grind all at once. Instead, grind a little bit at a time. Use an exhaust system to prevent the aspiration of dust produced when cutting the ferrite core.
Ferrite Cores VOL.05

movingtheir packing boxes, take due care to prevent injury or

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 6

Terms and Definitions


Alternating current initial magnetic permeability i At the initial magnetization curve's origin point, the magnetic permeability of the magnetic core is used as shown in the formula below.
m i m = tan m

i = 1 0

lim
H0

B H

i = tan i

Here 0 : vacuum magnetic permeability H : alternating current magnetic field strength (A/m) B : alternating current magnetic flux density (T) Effective magnetic permeability e In the magnetic core of a closed magnetic circuit (one in which flux leakage can be ignored), this refers to the magnetic permeability indicated in the following formula through the effective self-inductance.
L 10 9 R A 4 N 2 R R / A A

e =

e =

Here L : effective self-inductance (H) N : Number of all windings : Magnetic path lengths (cm) of each of the same materi als and same cross-section areas A : Each of the cross-section areas (cm2)

: Each of the materials' magnetic permeabilities Note : The first formula is used in measurement and the second
in calculating when the dimensions and magnetic permeabilities of each part of the magnetic core are given. Effective saturation magnetic flux density Bms(G ; T) This refers to the saturation magnetic flux density in actual use. B10 : Bms with magnetic field 10 Oe (796A/m) B15 : Bms with magnetic field 15 Oe (1194A/m) Effective saturation residual coercive force Brms(G ; T) This refers to the magnetic flux density when the magnetic field is removed from the condition of effective saturation magnetic flux density. Effective saturation coercive force Hcms(Oe ; A/m) When the magnetic field is removed from the condition of effective saturation magnetic flux density and further magnetized in the opposite direction, this refers to the strength of the magnetic field in which the magnetic flux becomes 0. Loss factor tan This refers to the hysteresis loss factor, vortex current loss factor and residual loss factor. The hysteresis loss coefficient (h1),vortex current loss coefficient (e1) and residual loss coefficient (r1) are represented by the following formula.
Hcs Hc Hcms Hc Hm Hcms Hms H H B Bs Brs Bms Brms Bm Br

Ba : saturation magnetic flux density Bms : effective saturation magnetic flux density Bm : maximum magnetic flux density Brs : saturation residual magnetic flux density Brms : effective saturation residual magnetic flux density Br : residual magnetic flux density Hcs : saturation coercive force Hcms : effective saturation coercive force Hc : coercive force Hms : effective saturation magnetic field strength Hm : maximum magnetic field strength

Ferrite Cores VOL.05

Ferrite Cores VOL.06

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 7

tan =

Rm Reff---Rw = L L

= tan h + tan e + tan r = h1 L i + e1f + r1 V

Here Rm: loss resistance () of the magnetic core alone Reff: loss resistance () of the coil including the mangetic core Rw: loss resistance () of the windings alone L: inductance (H) of the coil including the magnetic core V: magnetic core volume (mm) i: current (A)

: angular frequency 2 f(rad/s) f: frequency (Hz) tan h: hysteresis loss factor tan e: vortex current loss factor tan r: residual loss factor h1: hysteresis loss coefficient e1: vortex current loss coefficient r1: residual loss coefficient However with ferrite, separate calculation of tan e and tan r is difficult, so it is convenient to express them together as follows.
tan = tan h + tan f Relative loss factor tan / i This refers to the value of the loss factor divided by the alternating current initial magnetic permeability. tan "s = i ('s)2 Note: The following formula applies when the magnetic circuit gap is small. tan with gap e tan without gap i

Relative hysteresis loss factor h10 As shown in the next formula, this refers to the value when h1=1000. 1000 h10 = h1
3 2

Relative temperature factor for initial magnetic permeability "Relative temperature factor for initial magnetic permeability" refers to the "temperature factor for initial magnetic permeability" divided by "initial magnetic permeability"1.

= =

i 2---1 1 . = (T2 > T1) i 1 T2---T1 2---1 1 . (T2 > T1) 2 1 T2---T1

1 : initial magnetic permeability at temperature T1 2 : initial magnetic permeability at temperature T2

Ferrite Cores VOL.06

Ferrite Cores VOL.05

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 8

Curie temperature Tc ( C) This refers to the ambient temperature at which the magnetic core shifts from strong magnetism to paramagnetism. In actual practice, to obtain the Curie temperature, the specimen's initial magnetic permeability is measured and the relationship of this to temperature is drawn in a diagram. At the bottom, the extension of the line linking the 80% of maximum point and the 20% of maximum point is taken as the Curie temperature. Disaccommodation factor D F This factor applies when the fluctuation of magnetic permeability over time seems to be mostly linear with the time logarithm. It is expressed by the following formula. DF =
20% of the maximum value for i Temp [ C]

maximum value for i 80% of the maximum value for i

Curie temperature (Tc)

1---2
log10 t2 t1

. 1 (t > t ) 2 1 2 1

Here

1 : following complete demagnetization, the magnetic permeability after the passage of t 1 seconds. 2 : following complete demagnetization, the magnetic permeability after the passage of t 2 seconds. Induction factor AL As shown in the following formula, this refers to self-inductance that occurs per unit winding in a coil of constant shape and dimensions wound around the magnetic core.
AL = Here L N2 L: Self-inductance (H) in the coil when there is a magnetic core N: Number of all the coil's windings Resistance (m) This refers to the electrical resistance per unit cross-section area and unit length.

Density d (kg/m2) This is calculated as follows from the magnetic core volume and weight. d= W (kg/m3) V

Here W: magnetic core weight (kg) V : magnetic core volume (m3) For the most part the preceding definitions are based on JIS C2560 "Ferrite Magnetic Core Regulations."

Ferrite Cores VOL.05

Ferrite Cores VOL.06

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 9

High-B Compound Standard Material Characteristics


Material Model Initial permeability Relative hysteresis loss factor BH1 BH2 BH3 BH5 BH7 B40

i tan/ i

106 100kHz 200mT 23C 60C 80C 100C 23C 60C 80C 100C 60C 80C 60C 80C 23C 100C 23C 100C 23C

Core loss

Pcv

kW/m3

300kHz 100mT 500kHz 100mT 1MHz 50mT

Curie temperature Effective saturation magnetic flux density Effective saturation residual coercive force Effective saturation coercive force Density

Tc Bms Brms Hc d

C mT mT A/m kg/m3

230020% 230020% 180020% 230020% 160020% 150020% <5 <6 <5 <5 <8 <3 550 600 600 600 1250 400 450 430 430 1100 320 430 380 400 300 410 370 450 1350 680 730 500 500 520 330 430 470 300 400 450 340 790 780 360 380 220 220 260 220 350 240 520 510 540 520 600 530 410 400 440 410 490 430 100 100 200 120 185 250 55 55 80 70 220 120 13 14.3 15 19 17.0 43.6 4.8103 4.8103 4.8103 4.8103 4.9103 4.9103

800 700 600

Core loss vs. Temperature

100kHz,Bm=200mT

800 700

Core loss vs. Temperature

300kHz,Bm=100mT

Pcv(kW/m3)

Pcv(kW/m3)

BH5 BH2 BH1

600 500 400 300 200 100 0 BH5 BH1 BH2

500 400 300 200 100 0

20

40

Temperature(C)

60

80

100

120

140

20

40

Temperature(C)

60

80

100

120

140

400 350 300

Core loss vs. Temperature


BH1

200kHz,Bm=100mT

2000 1800 1600

Core loss vs. Temperature

500kHz,Bm=100mT
BH2 BH1 BH5

Pcv(kW/m3)

250 200 150 100 50 0 0 20 40 60 80 100 BH5

Pcv(kW/m3)

BH2

1400 1200 1000 800 600 400 200

Temperature(C)

120

0 140

20

40

Temperature(C)

60

80

100

120

140

1500

B40 type core loss vs. Temperature

600

Saturation magnetic flux density vs. Temperature

500

Pcv (kW/m3)

750

500kHz 100mT

Bm (mT)

B40 BH3 400 BH1,BH2,BH5

1MHz 50mT 0

300

20

40

Temperature (C)

60

80

100

120

140

200

20

40

Temperature (C)

60

80

100

120

140

160

Ferrite Cores VOL.06

Ferrite Cores VOL.05

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 10

10000

Characteristics of i vs. Frequency


B40

12000 10000 8000

Characteristics of i vs. Temperature

1000

BH1,BH2,BH5

BH3
100

6000 4000 2000

BH1,BH2 BH5 BH3 B40

10

10

Frequency(kHz)

100

1000

10000

50

100

Temperature(C)

150

200

250

300

600 500 400

BH1 type B-H Curves at DC Magnetic field


23C 60C 100C

600 500 400

BH2 type B-H Curves at DC Magnetic field


23C 60C 100C 120C

B (mT)

B (mT)

120C 300 200 100 0

300 200 100 0

200

400

H (A/m)

600

800

1000

1200

200

400

H (A/m)

600

800

1000

1200

600 500 400

BH3 type B-H Curves at DC Magnetic field


23C 60C 100C

600 500 400

BH5 type B-H Curves at DC Magnetic field


23C 60C 100C 120C

B (mT)

B (mT)

120C

300 200 100 0

300 200 100 0

200

400

H (A/m)

600

800

1000

1200

200

400

H (A/m)

600

800

1000

1200

600 500 400

B40 type B-H Curves at DC Magnetic field


23C 60C 100C

B (mT)

120C

300 200 100 0

200

400

H (A/m)

600

800

1000

1200

Ferrite Cores VOL.05

Ferrite Cores VOL.06

10

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 11

10000

BH1 type Core loss vs. Flux density

f=100kHz

10000

BH1 type Core loss vs. Frequency

Bm=200mT

1000

1000

Pcv (kW/m3)

Pcv (kW/m3)

100

60C

100

25C

100C

10

25C

100C

10

60C

1 10

100

1000

10

Bm (mT)
10000

Frequency (kHz)

100

1000

BH2 type Core loss vs. Flux density

f=100kHz

10000

BH2 type Core loss vs. Frequency

Bm=200mT

1000

1000

Pcv (kW/m3)

Pcv (kW/m3)

100

100

25C 60C

10

25C

60C

10

100C

100C 1 10 100 1000 1 10

Bm (mT)

Frequency (kHz)

100

1000

100000

B40 type Core loss vs. Flux density

f=500kHz

100000

B40 type Core loss vs. Frequency

Bm=100mT

10000

60C

10000

Pcv (kW/m3)

1000 25C

Pcv (kW/m3)

1000 25C 100 100C 60C

100

10 100C

10

1 10

Bm (mT)

100

300

100

Frequency (kHz)

1000

Ferrite Cores VOL.06

Ferrite Cores VOL.05

10

11

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 12

High-Compound Standard Material Characteristics


Material Model Initial permeability Effective saturation magnetic flux density 5H 7H 700025% 460 (H=800A/m) 75 5.0 <10 (100kHz) >130 <2.0 4.9103 10H 1000030% 430 (H=800A/m) 100 3.5 <7 (10kHz) >120 <2.0 4.9103 12H 1200030% 420 (H=800A/m) 100 3.2 <7 (10kHz) >125 <2.0 4.9103 15H 1500030% 430 (H=800A/m) 80 2.0 <7 (10kHz) >120 <2.0 5.0103

i Bms

23C 23C 23C

mT mT A/m 10-6 C 10-6 kg/m3

Effective saturation residual coercive force Brms Effective saturation coercive force Hcms Relative loss factor tan/ i Curie temperature Disaccommodation factor Density Tc DF d

500025% 460 (H=800A/m) 75 7.0 <10 (100kHz) >130 <3.0 4.9103

100000

Characteristics of i vs. Frequency


15HUnder development 12H 10H

30000 25000

Initial permeability vs. Temperature

10000

7H 5H

20000

15000 10000 5000

15HUnder development development

10H 12H

1000

7H 5H

100

10

Frequency (kHz)

100

1000

10000

0 -40

600 500 400

5H type B-H Curves at DC Magnetic field


-30C 0C 20C 40C 70C 100C

600 500 400

12H type B-H Curves at DC Magnetic field


-30C 0C 23C 60C

Temperature (C)

40

80

120

160

B (mT)

B (mT)

300 200 100 0 0 200 400

300 200 100 0 100C

H (A/m)

600

800

1000

200

400

H (A/m)

600

800

1000

Ferrite Cores VOL.05

Ferrite Cores VOL.06

12

11

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 14

FEI-Type Cores

Cores

JIS

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

Acp (mm2)

Acw (mm2)

AL(nH) BH1,BH2

Weight (g)

FEI12.5 FEI16 FEI19 FEI22 FEI22S FEI25 FEI28 FEI30 FEI33 FEI35 FEI35S FEI40 FEI44 FEI50 FEI60

FEI12.5 FEI16 FEI19 FEI22 FEI25.4 FEI28 FEI30 FEI33 FEI35A FEI35C FEI40 FEI44 FEI50 FEI60

1.42 1.79 1.74 0.95 1.16 1.14 0.57 0.52 0.57 0.68 0.56 0.52 0.46 0.41 0.44

15.2 19.4 22.7 41.7 36.2 41.2 85.1 111 118.1 99.9 120 140 190 230 247

21.6 34.6 39.8 39.3 42.1 47 48.6 58.1 66.9 67.3 67.3 76.8 86.5 94.7 109

328 670 910 1639 1525 1934 4139 6457 7909 6700 8090 11378 16400 21780 27148

12 19.2 22.5 33.1 33.1 43.9 77 115 124 97 117 135.7 176 231.2 243.4

17 40 57 40 57 99 71 77 136 127 137 163 224 249 409

140025% 120025% 130025% 240025% 200025% 200025% 400025% 470025% 430025% 365025% 440025% 475025% 540025% 595025% 550025%

1.9 3.2 4.4 8.8 7.7 11.0 24.0 35.0 41.5 36.2 41.5 61.0 82.7 110.0 140.0

Shape and Dimensions

F B I C

FEI12.5 FEI16 FEI19 FEI22 FEI22S FEI25 FEI28 FEI30 FEI33 FEI35 FEI35S FEI40 FEI44 FEI50 FEI60

Cores

FEI12.5 FEI16 FEI19 FEI22 FEI25.4 FEI28 FEI30 FEI33 FEI35A FEI35C FEI40 FEI44 FEI50 FEI60

JIS

12.50.2 160.3 19.10.3 220.3 220.4 25.30.5 280.5 300.5 330.5 +0.8 350.5 +0.8 350.5 400.5 440.6 500.7 600.8

+0.2 7.30 +0.4 120 +0.4 13.30 +0.5 14.30 +0.5 14.40 +0.5 15.30 +0.5 16.50 +0.5 210 23.30.3 +0.7 23.80 +0.7 23.80 +0.5 270 +0.5 300 +0.7 330 +0.7 35.50

50.2 5+0 0.4 5.2+0 0.4 +0 6 0.5 +0 6 0.5 7+0 0.5 11+0 0.6 +0 11 0.6 +0 13 0.6 +0 100.5 12+0 0.6 12+0 0.7 15.3+0 0.6 15+0 0.8 16+0 0.8

2.5+0 0.2 40.2 +0 4.70.4 6+0 0.5 6+0 0.5 6.8+0 0.6 7.5+0 0.6 +0 11 0.6 +0 10 0.6 +0 10.30.6 10.3+0 0.6 12+0 0.7 +0 12 0.6 15+0 0.8 16+0 0.8

E(min)

9.0 11.8 14.4 13.0 16.0 19.2 18.8 19.8 23.2 25.0 25.0 27.2 31.2 34.0 44.1

+0.2 50 +0.4 100 +0.5 110 +0.5 10.30 +0.4 10.60 +0.4 12.20.1 +0.5 120 +0.5 160 +0.5 18.80 +0.6 180 +0.6 180 +0.5 200 +0.5 230 +0.5 24.50 +0.7 27.50

1.50.1 1.50.1 2.30.1 4.50.2 40.2 2.70.2 3.50.3 5.50.2 50.2 5.50.2 5.50.2 7.50.3 7.00.3 90.3 8.50.3
[mm]

Numbering System

FEI22 - BH2

Core size FEI : FEI-type Core material

FEE : FEE-type

Ferrite Cores VOL.06 VOL.05

12 14

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 15

FEE-Type Cores

Cores

JIS

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

Acp (mm2)

Acw (mm2)

AL(nH) BH1,BH2

Weight (g)

FEE10/11 FEE12.5W FEE16 FEE16W FEE19 FEE19W FEE19/16/5 FEE22 FEE22W FEE22SW FEE25Z FEE25W FEE28/12.5/10.9 FEE28W FEE28S FEE30W FEE33W FEE34/28/9 FEE35W FEE35SW FEE40/44.6/11 FEE40W FEE41/33/12 FEE42/15 FEE42/20 FEE44W FEE50W FEE60W

FEE16A FEE19A E187

E375

E21

2.16 2.1 1.8 2.9 1.73 2.78 1.75 0.98 1.48 1.82 1.20 1.73 0.72 0.83 0.564 0.829 0.886 0.850 1.06 0.88 0.67 0.817 0.517 0.563 0.417 0.717 0.626 0.68

12.1 14.9 19 19 23 22.4 22.8 41 40 35 41.4 41.7 82.6 87.7 87 111 118 81.6 100 120 145 148 149.8 176 237 190 230 247

26.1 31.4 34.8 55.1 39.8 62.2 39.9 39.8 59.2 63.6 49.8 72.1 59.3 73.2 49.3 90.2 104.7 69.37 105.2 105.2 97.2 117 77.38 98.8 98.3 132.9 142.3 165.2

315 469 670 1048 910 1393 907 1620 2370 2220 2060 3010 4893 6421 4310 9820 12380 5660 10410 12560 14110 16770 11591 17300 23200 24700 32350 40140

11.6 12 19 19.2 23 22.5 22.2 33 33.1 33.1 43.9 43.9 84.5 77 78 115 124 85.7 97 117 136 136 155.0 183 242 176 213 243

22.9 34.7 40 82.6 57 114 54.9 40 79.7 114 87.1 159 108 146 73 154 271 162.6 282 274 244 326 175.7 275 275 448 498 818

85025% 95025% 120025% 75025% 125025% 80025% 125025% 220025% 150025% 125025% 209025% 140025% 350025% 300025% 445025% 300025% 283025% 295025% 236025% 280025% 375025% 307025% 485025% 446025% 600025% 350025% 400025% 370025%

1.5 2.4 3.3 5.2 4.8 7.0 7.0 8.8 11.9 11.1 10.3 15.0 24.5 32.1 21.5 49.1 61.9 36.0 52.1 62.8 70.5 83.9 60.0 97.5 130.0 123.3 161.8 200.7

Ferrite Ferrite Cores Cores VOL.05 VOL.06

13 15

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 16

Shape and Dimensions

F B

F B C

FEE10/11 FEE12.5W FEE16 FEE16A FEE16W FEE19 FEE19A FEE19W FEE19/16/5 E187 FEE22 FEE22W FEE22SW FEE25Z FEE25W FEE28/12.5/10.9 FEE28W FEE28S FEE30W FEE33W FEE34/28/9 FEE35W FEE35SW FEE40/44.6/11 FEE40W FEE41/33/12 FEE42/15 FEE42/20 FEE44W FEE50W FEE60W

Cores

JIS

10.20.2 +0.4 12.50.2 160.3 160.3 19.10.3 19.10.3 19.30.3 220.3 220.3 +0.6 220.3 +0.6 25.30.5 +0.6 25.30.5 280.5 +0.7 280.5 28.00.4 30.00.5 +1.0 33.00.5 34.40.5 +0.8 35.00.5 +0.8 35.00.5 +0.9 40.00.5 40.00.5 40.640.6 42.00.5 42.00.5 44.00.6 50.00.7 60.00.8

5.50.1 +0.2 7.30 +0.3 70 +0.4 120 +0.3 7.80 +0.4 13.30 +0.26 7.920 +0.3 9.20 +0.5 14.30 +0.5 14.40 9.950.2 +0.5 15.30 12.50.2 +0.5 16.50 10.50.5 +0.5 21.00 23.30.3 +0.3 13.970 +0.7 23.80 +0.7 23.80 22.30.3 +0.5 27.00 +0.35 16.310 +0.6 21.00 +0.6 21.00 +0.5 30.00 +0.7 33.00 +0.7 35.50

4.750.15 50.2 5+0 0.4 5+0 0.4 5.2+0 0.4 5.2+0 0.4 4.750.13 +0 6 0.5 6+0 0.5 6+0 0.5 +0 7 0.5 +0 7 0.5 10.9+0 0.4 11+0 0.6 +0 11.0 0.6 11.0+0 0.6 13.0+0 0.6 9.20.3 +0 10.0 0.6 12.0+0 0.6 12.0+0 0.7 12.0+0 0.7 12.450.25 +0 15.2 0.6 20.0+0 0.5 15.3+0 0.6 +0 15.0 0.8 +0 16.0 0.8

2.450.15 2.5+0 0.2 4.2+0 0.4 40.2 +0 4.7 0.4 4.7+0 0.4 4.680.15 +0 6 0.5 6+0 0.5 6+0 0.5 6.8+0 0.6 6.8+0 0.6 +0.1 80.3 7.5+0 0.6 7.5+0 0.5 +0 11.0 0.6 +0 10.0 0.6 9.320.2 10.3+0 0.6 10.3+0 0.6 12.0+0 0.7 12.0+0 0.7 12.450.25 +0 12.5 0.5 12.5+0 0.5 12.0+0 0.6 +0 15.0 0.8 +0 16.0 0.8

E(min)

7.7 9.0 11.8 11.8 14.4 14.3 14.05 13.0 12.8 15.6 19.2 19 20 18.6 18.6 19.5 23.0 25.4 24.6 24.6 26.8 27.2 28.55 30.0 30.0 31.2 34.0 44.1

4.20.15 +0.2 50 +0.2 50 +0.4 100 +0.3 5.50 +0.5 110 +0.25 5.570 +0.3 5.20 +0.5 10.30 +0.4 10.60 6.750.2 +0.4 12.20.1 +0.4 8.50 +0.5 120 6.20.2 +0.5 16.00 +0.5 18.80 +0.2 9.70 +0.6 18.00 +0.6 18.00 15.30.3 +0.5 20.00 +0.24 10.420 +0.5 15.50 +0.5 15.50 +0.5 23.00 +0.5 24.50 +0.7 27.50
[mm]

Numbering System

FEI22 - BH2

Core size FEI : FEI-type Core material

FEE : FEE-type

Ferrite Cores VOL.06 VOL.05

14 16

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 19

FEER-Type Cores

Cores
FEER22S FEER22 FEER25.5 FEER28 FEER28L FEER29 FEER34 FEER35 FEER35L FEER39 FEER39L FEER40 FEER4042 FEER42 FEER42L FEER42A FEER44 FEER49

JIS

C1 (mm-1)
0.301 1.665 1.16 0.78 0.95 0.99 0.86 0.72 0.87 0.79 0.80 0.67 0.63 0.56 0.48 0.44 0.63 0.42

Ae (mm2)
35.0 37.5 43.2 85.3 84.7 75.0 96.6 110.1 108.4 123.2 131.9 152.8 15.0 182.5 239.0 232.5 172.0 229.1

Re (mm)
55.4 62.4 50.0 66.8 78.3 74.3 83.0 79.0 94.5 97.1 106.1 102.4 100.0 101.8 113.6 101.4 108.7 97.2

Ve (mm3)
1940 2340 2157 5702 6635 5590 8014 8695 10248 11970 13993 15637 15756 18574 27180 23572 18707 22263

Acp (mm2)
35.0 34.7 44.2 77.0 77.0 71.0 91.6 100.3 100.3 122.7 128.7 138.9 153.9 181.5 235.0 235.1 172.0 232.4

Acw (mm2)
68.0 97.9 80.3 114.8 149.1 145.0 186.3 160.9 220.5 259.9 280.5 247.9 256.5 241.0 232.7 228.8 306.7 245.5

AL(nH) BH1,BH2
170025% 140025% 205025% 300025% 254025% 250025% 293025% 350025% 290025% 320025% 315025% 375025% 400025% 455025% 530025% 570025% 400025% 600025%

Weight (g)
10.0 12.0 10.8 28.5 33.2 27.0 41.5 45.0 50.7 60.0 70.0 78.1 72.1 87.6 135.9 118.0 88.6 110.0

FEER25.5A FEER28.5A FEER28.5B FEER34.2 FEER35A FEER39.1 FEER39

FEER44

Shape and Dimensions

B F

Cores FEER22S FEER22 FEER25.5 FEER28 FEER28L FEER29 FEER34 FEER35 FEER35L FEER39 FEER39L FEER40 FEER4042 FEER42 FEER42L FEER42A FEER44 FEER49

JIS

FEER25.5A FEER28.5A FEER28.5B FEER34.2 FEER35A FEER39.1 FEER39

FEER44

A 22.00.4 22.00.3 25.50.5 +0.6 28.50.5 +0.6 28.50.5 30.6+0 1.6 35.0+0 1.6 35.00.7 35.00.5 +1.1 38.90.7 39.00.6 40.00.5 40.00.5 42.00.6 +0.8 42.00.5 42.00.5 +1.2 43.80.8 49.00.8

B 11.1 14.70.15 9.30.2 14.00.2 16.90.25 15.80.2 17.30.2 16.80.3 20.70.3 20.0+0 0.4 22.20.3 22.40.2 21.00.2 21.20.2 25.40.2 21.20.2 22.5+0 0.4 +0.5 18.80.1

C 6.650.25 6.650.15 7.50.2 11.40.25 11.40.25 9.8+0 0.6 11.1+0 0.6 11.30.25 11.30.25 12.8+0 0.6 12.80.25 13.30.25 15.00.2 15.20.2 17.30.25 20.0+0 0.8 15.2+0 0.8 17.20.2

D 6.650.25 6.650.1 7.50.15 9.90.25 9.90.25 9.8+0 0.6 11.1+0 0.6 11.30.25 11.30.25 12.8+0 0.6 12.80.2 13.30.25 14.00.25 15.20.2 17.30.25 17.30.25 15.2+0 0.8 17.20.2

E(min) 15.5 15.5 19.8 21.2 21.2 22.0 25.5 25.6 25.6 29.3 28.7 29.0 30.7 30.5 29.8 31.8 32.5 36.5

F +0.3 7.10 10.70.15 6.20.2 +0.3 9.60.2 +0.3 12.50.25 11.00.13 +0.6 11.80 10.80.3 14.70.3 +0.8 14.20 17.00.25 15.40.25 15.00.2 +0.5 15.00 17.90.2 +0.5 15.00 +0.6 16.10 +0.4 12.20
[mm]

Numbering System

FEER 28L BH2


Core size Core material

Ferrite Ferrite Cores Cores VOL.05 VOL.06

15 19

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 22

FPQ-Type Cores

Cores

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

Acp (mm2)

Acw (mm2)

AL(nH) BH1,BH2

Weight (g)

FPQ2016 FPQ2020 FPQ2620 FPQ2625 FPQ3220 FPQ3230 FPQ3535 FPQ4040

0.58 0.70 0.36 0.44 0.31 0.44 0.46 0.49

65 65 124 123 157 156 172 189

37.3 45.3 44.5 53.7 48.9 68.4 79.6 92.9

2420 2920 5510 6620 76980 10700 13700 17600

61 61 113 113 142 142 162 174

47.4 65.8 60.4 84.5 80.8 149.6 220.6 326

380025% 315025% 600025% 500025% 731025% 515025% 490025% 470025%

13.0 15.0 31.0 36.0 42.0 55.0 73.0 95.0

Shape and Dimensions


A E D I

FPQ2016 FPQ2020 FPQ2620 FPQ2625 FPQ3220 FPQ3230 FPQ3535 FPQ4040

Cores

20.9+0 0.8 20.9+0 0.8 26.95+0 0.9 26.95+0 0.9 +0 32.5 1.0 32.5+0 1.0 35.7+0 1.2 +0 41.4 1.8

8.2+0 0.2 10.2+0 0.2 10.2+0 0.2 +0 12.5 0.25 +0 10.4 0.25 15.3+0 0.25 17.5+0 0.25 +0 20.0 0.25

14.4+0 0.8 14.4+0 0.8 19.45+0 0.9 19.45+0 0.9 +0 22.5 1.0 22.5+0 1.0 26.5+0 1.0 +0 28.6 1.2

9.0+0 0.4 9.0+0 0.4 12.2+0 0.4 +0 12.2 0.4 +0 13.7 0.5 13.7+0 0.5 14.6+0 0.5 +0 15.2 0.5

17.6+0.8 0 17.6+0.8 0 22.05+0.9 0 22.05+0.9 0 +1.0 27.00 27.0+1.0 0 31.5+1.0 0 +1.2 36.40

5.0+0.3 0 7.0+0.3 0 5.6+0.3 0 +0.3 7.90 +0.3 5.60 10.5+0.3 0 12.35+0.3 0 +0.3 14.60

I (min)

12.0 12.0 15.5 15.5 19.0 19.0 23.5 28.0

[mm]

Numbering Systems

FPQ 2016 - BH2


Core size Core material

Ferrite Cores VOL.06 VOL.05

16 22

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

003~025_E_5 12.10.10 9:35 AM 25

FQK-Type Cores

Cores

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

Acp (mm2)

Acw (mm2)

AL(nH) BH1,BH2

Weight (g)

FQK1623 FQK2522 FQK2532

1.41 0.72 0.91

31.3 67.9 70.3

44.1 49.0 64.0

1377 3327 4498

24.6 58.1 58.1

31.9 48.0 73.8

170025% 320025% 250025%

9.6 21.0 30.0

Shape and Dimensions


I H
F B

D E A

FQK1623 FQK2522 FQK2532

Cores

16.50.3 25.00.4 25.00.4

11.8+0 0.2 11.3+0 0.2 16.0+0 0.2

8.70.2 12.90.3 12.90.3

F B

5.8+0 0.2 8.8+0 0.4 8.8+0 0.4

12.50.3 19.00.3 19.00.3

+0.25 8.60 +0.3 8.050 +0.3 11.90

3.0 3.0 3.0

9.00.5 13.50.5 13.50.5


[mm]

I (min)

Numbering System

FQK 1623 - BH2


Core size Core material

Ferrite Ferrite Cores Cores VOL.05 VOL.06

17 25

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

026~032_E_5 12.10.10 9:36 AM 27

FEP-Type Cores

Cores

JIS

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

Acp (mm2)

Acw (mm2)

AL (nH)

Weight (g)

FEP7

EP7

1.52

10

15.7

160

11

FEP10

EP10

1.7

11

19.2

220

23

FEP13

EP13

1.24

20

24.2

470

15

26

FEP17

EP17

0.84

34

28.5

970

25

36

FEP20

EP20

0.51

78

39.8

3120

60

55

>550 >1100 >3000 >4000 >5200 >850 >1080 >2800 >3600 >4000 >1250 >1700 >3800 >5000 >6000 >2500 >5800 >8000 >9600 >4200 >9600 >13500 >16200

(BH2) (5H) (7H) (10H) (12H) (BH2) (5H) (7H) (10H) (12H) (BH2) (5H) (7H) (10H) (12H) (5H) (7H) (10H) (12H) (5H) (7H) (10H) (12H)

1.4

2.8

5.1

11.8

27.6

Shape and Dimensions

D
F B

FEP7 FEP10 FEP13 FEP17 FEP20

Cores

EP7 EP10 EP13 EP17 EP20

JIS

9.20.2 11.50.3 12.50.3 18.00.4 24.00.5

3.75+0 0.1 5.2+0 0.2 6.5+0 0.15 8.5+0 0.2 +0 10.8 0.2

6.5+0 0.3 7.85+0 0.4 9.0+0 0.4 +0 11.25 0.5 15.3+0 0.7

3.4+0 0.2 3.45+0 0.3 4.5+0 0.3 +0 5.85 0.35 9.0+0 0.5

7.40.2 9.40.2 10.00.3 12.00.4 16.50.4

+0.2 2.50 +0.2 3.60 +0.2 4.50 +0.3 5.50 +0.3 7.00

[mm]

Numbering System

FEP 10 - 12H

Core size Core material

Ferrite Cores VOL.06

Ferrite Cores VOL.05

18

27

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

P-Type Cores

Cores FP0905-I-22 FP1107-I-22 FP1408-I-22

C1 1.25 1.00 0.80

Ae (mm-1) 10.0 15.9 25.0

e (mm2) 12.5 15.9 20.0

Ve (mm3) 125 252 500

AL (nH) 1100nom. 157025% 1700nom. 232025% (BH2) (5H) (BH2) (5H)

Weight (g) 0.8 1.6 2.9

2520nom. (BH2) 300025% (5H) 1130030% (12H) 3450nom. (BH2) 450025% (5H) 1200030% (12H) 590025% 780025% 980025% (5H) (5H) (5H)

FP1811-I-22

0.60

43.2

25.9

1120

6.4

FP2213-I-22 FP2616-I-22 FP3019-I-22 FP3622-I-22

0.50 0.40 0.33 0.26

63.3 93.0 136 202

31.6 37.2 44.8 52.4

2000 3460 6100 10600

12.4 21.6 36.2 60

1330025% (5H)

Shape and Dimesions

A B

Cores FP0905-I-22 FP1107-I-22 FP1408-I-22 FP1811-I-22 FP2213-I-22 FP2616-I-22 FP3019-I-22 FP3622-I-22

A 9.30 +0 0.35 11.30 +0 0.40 14.10 +0 0.40 +0 18.00 0.50 22.00 +0 0.60 26.00 +0 1.00 +0 30.50 1.00 36.00 +0 1.00

B 7.50 +0.35 0 9.00 +0.40 0 11.60 +0.40 0 +0.50 14.90 0 17.90 +0.60 0 21.20 +0.80 0 +0.80 25.00 0 29.90 +0.80 0

2H

2I

C +0 3.90 0.20 +0 4.70 0.20 +0 6.00 0.20 +0 7.60 0.30 +0 9.40 0.40 +0 11.50 0.40 +0 13.50 0.40 +0 16.20 0.40

D +0.15 2.00 0 +0.15 2.00 0 +0.15 3.00 0 +0.15 3.00 0 +0.20 4.40 0 +0.20 5.50 0 +0.20 5.50 0 +0.20 5.50 0

2H +0 5.40 0.30 +0 6.60 0.30 +0 8.40 0.40 +0 10.60 0.40 +0 13.60 0.40 +0 16.30 0.40 +0 19.00 0.40 +0 22.00 0.40

2I +0.50 3.60 0 +0.30 4.40 0 +0.50 5.60 0 +0.60 7.20 0 +0.60 9.20 0 +0.40 11.00 0 +0.40 13.00 0 +0.40 14.60 0
[mm]

Numbering System

FP1811 I- 2 2 5H

Core size Number of slots of cores Cores material

Ferrite Cores VOL.06

19

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

026~032_E_5 12.10.10 9:36 AM 29

RM-Type Cores

Cores

Type

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

AL (nH)

Weight (g)

FQ0910-RM4

1.62

1.40

22.7

318

FQ1210-RM5

1.02

21.0

21.4

450

FQ1412-RM6

0.86

31.0

27.0

837

FQ1916-RM8

0.67

52.0

35.1

1825

FQ2418-RM10

0.45

98.0

44.0

4312

124025% (5H) 310025% (7H) 410030% (10H) 495030% (12H)* 1350min (BH2) 222025% (5H) 580025% (7H) 880030% (10H) 910030% (12H)* 1720min (BH2) 330025% (5H) 600025% (7H) 850030% (10H) 1150030% (12H)* 2200min (BH2) 430025% (5H) 980025% (7H) 1380030% (10H) 1520030% (12H)* 662025% (5H) 1380025% (7H) 1880030% (10H)

1.7

2.8

4.6

10.4

23

*1kHz 0.5mA

Shape and Dimensions Type1


E
A A
G

Type2
E
A

Type3
E
A A
G

D C B F

D C B F

C B F

2I 2H

2I 2H

Cores FQ0910-RM4 FQ1210-RM5 FQ1412-RM6 FQ1916-RM8 FQ2418-RM10

A 9.600.20 12.050.25 14.400.30 19.350.35 24.150.55

B 8.150.20 10.400.20 12.650.25 17.300.30 21.650.45

C 3.800.10 4.800.10 6.300.10 8.400.15 10.700.20

E 5.80 2.050.05 6.00 3.050.05 8.40 4.500.10 9.80 11.30

2H

2I

F 10.800.20 14.650.25 17.600.30 22.750.45 27.850.65

G 4.450.15 6.600.20 8.100.10 (11.0) 13.250.25

2H 10.400.10 10.400.10 12.400.10 16.400.10 18.600.10

2I 7.200.25 6.500.20 8.200.20 11.000.20 12.700.30


[mm]

Numbering System

FQ1412-RM6 - 12H

Core size Core material

Ferrite Cores VOL.06

Ferrite Cores VOL.05

20

29

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

026~032_E_5 12.10.10 9:36 AM 31

Toroidal Cores

Standard material characteristics (See of page12.) 11

Cores

C1 (mm-1)

Ae (mm2)

Re (mm)

Ve (mm3)

AL(nH) 5H 7H 10H 12H

FR8.6/4.5/3.2 FR10/5/5 FR11/6/3 FR12.7/7.6/6 FR14/7/5 FR16/7/4 FR19/10/10 FR20/10/5 FR25/15/12 FR38/19/13 FR47/27/15

3.07 1.85 3.49 2.07 1.84 1.92 0.96 1.83 1.03 0.72 0.76

6.3 11.4 7.2 14.8 16.6 16.8 43.1 23.8 58.5 116 145

19.2 20.9 25.1 30.5 30.5 32.3 41.6 43.6 60.2 82.8 110

120 238 181 450 506 543 1794 1037 3521 9584 16064

158030% 247030% 240030% 265030% 247030% 597030% 264030% 573030% 857030% 817030%

250030% 480030% 226030% 390030% 466030% 482030% 952030% 474030% 850030% 1210030% 1150030%

636030% 630030% 1100030% 640030% 1150030% 1370030%

460035% 730035% 420035% 660035% 770035% 720035% 1400035% 740035% 1300035%

Note: These can be coated with melamine resin.

Shape and Dimensions


C or R

D2

D1

Cores FR8.6/4.5/3.2 FR10/5/5 FR11/6/3 FR12.7/7.6/6 FR14/7/5 FR16/7/4 FR19/10/10 FR20/10/5 FR25/15/12 FR38/19/13 FR47/27/15

D1 8.60.3 9.90.4 11.00.4 12.70.3 14.00.4 16.00.4 18.50.5 20.00.5 25.00.5 38.10.8 47.00.8

D2 4.50.3 4.70.3 6.00.3 7.60.3 7.00.4 7.00.4 9.80.5 10.00.5 15.00.5 19.00.5 27.00.5

H 3.20.3 4.60.3 3.00.3 6.00.3 5.00.3 4.00.3 10.30.4 5.00.3 12.00.3 12.70.5 15.00.5

C or R 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0
[mm]

Numbering System

FR 8.6 /4.5 /3.2 - 5H


Outside diameter Inside diameter Thickness Core material

Ferrite Ferrite Cores Cores VOL.05 VOL.06

21 31

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

026~032_E_5 12.10.10 9:36 AM 32

Ferrite Cores VOL.06 VOL.05

22 32

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

BH2 Compound Technical Data

Ferrite Cores VOL.06

23

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 34

FEI 12.5
AL* (nH) 140025% Core constanst C1 (mm-1) 1.42

Effective cross-sectional area Ae (mm2) 15.2

Eeffective magnetic path length Re (mm) 21.6

Effective volume Ve (mm3) 328

Cross-sectional center leg area Acp (mm2) 12.8

Cross-sectional winding area of core Acw (mm2) 17

Weight (g/set) 1.9

*1kH 1mA 0.2 100T(Air Gap 0)

Shape and Dimensions

2.5 0 9.0 0.2 12.5

+0 0.2

5.0 7.3

+0.2 0 +0.2 0

5.0

0.2

5.0

0.2

1.5 0.1

12.5

0.2

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

AL (nH)

1000

1000

100

100

GAP 0.1 GAP 0.2 GAP 0.5

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C

23C
0.1

60C 100C

0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

24 34

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 35

FEI 16
AL* (nH) 120025% Core constant C1 (mm-1) 1.79

Effective cross-sectional area Ae (mm2) 19.4

Effective magnetic path length Re (mm) 34.6

Effective volume Ve (mm3) 670

Cross-sectional center leg area Acp (mm2) 19.2

Cross-sectional winding area of core Acw (mm2) 40

Weight (g/set) 3.2

*1kH 1mA 0.35 100T(Air Gap 0)

Shape and Dimensions

4.0 0 11.8 0.3 16.0

0.2

10.00 12.0

+0.4 +0 0.4 +0 0.4

+0.4 0

5.0

5.0

2.0

0.2

16.0

0.3

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2

100

100

GAP 0.3

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

60C

0.1

23C 60C 100C

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

25 35

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 36

FEI 19
AL* (nH) 130025% Core constant C1 (mm-1) 1.74

Effective cross-sectional area Ae (mm2) 22.7

Effective magnetic path length Re (mm) 39.8

Effective volume Ve (mm3) 910

Cross-sectional center leg area Acp (mm2) 22.5

Cross-sectional winding area of core Acw (mm2) 57

Weight (g/set) 4.4

*1kH 1mA 0.35 100T(Air Gap 0)

Shape and Dimensions

11.0 13.3

+0.5 0

+0.4 0

5.2 0.4

+0

4.7 0 14.4 19.10.3

5.2

+0 0.4

2.3

0.1

19.10.3

+0 0.4

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

AL (nH)

1000

1000
GAP 0.1 GAP 0.2

100

100

GAP 0.5 GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

10

100

1000

NI (AT)
10

10

Core loss vs. Flux density

f=100kHz

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

60C

0.1

23C 60C

100C

0.01

0.01

100C

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

26 36

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 37

FEI 22
AL* (nH) 240025% Core constant C1 (mm-1) 0.95

Effective cross-sectional area Ae (mm2) 41.7

Effective magnetic path length Re (mm) 39.3

Effective volume Ve (mm3) 1639

Cross-sectional center leg area Acp (mm2) 33.1

Cross-sectional winding area of core Acw (mm2) 40

Weight (g/set) 8.8

*1kH 1mA 0.35 100T(Air Gap 0)

Shape and Dimensions

6.0 0 13.0 22.0 0.3

+0 0.5

10.3 0 14.3

+0.5 +0 +0 0.5

+0.5 0

6.0 0.5

6.0

4.5

0.2

[mm]

22.0

0.3

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000
GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C 100C

0.1

23C 60C

0.01

0.01

100C

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

27 37

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 38

FEI 22S
AL* (nH) 200025% Core constant C1 (mm-1) 116

Effective cross-sectional area Ae (mm2) 36.2

Effective magnetic path length Re (mm) 42.1

Effective volume Ve (mm3) 1525

Cross-sectional center leg area Acp (mm2) 33.1

Cross-sectional winding area of core Acw (mm2) 57

Weight (g/set) 7.7

*1kH 1mA 0.35 100T(Air Gap 0)

Shape and Dimensions

0.4

6.0 0.5 0 16.0

+0

22.0

10.6 14.4

+0.4 0

+0.5 0

6.0

+0 0.5

6.0

+0 0.5

4.0

0.2

[mm]

22.0

0.3

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

AL (nH)

1000

1000
GAP 0.1 GAP 0.2

100

100

GAP 0.5 GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C 100C

0.1

23C 60C 100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

28 38

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 39

FEI 25
AL* (nH) 200025% Core constant C1 (mm-1) 1.14

Effective cross-sectional area Ae (mm2) 41.2

Effective magnetic path length Re (mm) 47.0

Effective volume Ve (mm3) 1934

Cross-sectional center leg area Acp (mm2) 43.9

Cross-sectional winding area of core Acw (mm2) 99

Weight (g/set) 11.0

*1kH 1mA 0.35 100T(Air Gap 0)

Shape and Dimensions

6.8 19.2 0 0.5 25.3

+0 0.6

12.2 0.1 15.3


+0.5 0

+0.4

7.0

+0 0.5

7.0

+0 0.5

2.7

0.2

[mm]

25.3

0.5

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000
GAP 0.1

GAP 0.5

100

100

GAP 1.0 GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C 100C

23C
0.1

60C 100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

29 39

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 40

FEI 28
AL* (nH) 400025% Core constant C1 (mm-1) 0.57

Effective cross-sectional area Ae (mm2) 85.1

Effective magnetic path length Re (mm) 48.6

Effective volume Ve (mm3) 4138

Cross-sectional center leg area Acp (mm2) 77.0

Cross-sectional winding area of core Acw (mm2) 71

Weight (g/set) 24.0

*1kH 1mA 0.3 100T(Air Gap 0)

Shape and Dimensions

7.5 0 18.8 28.0 0.5

+0 0.6

12.0 0 16.5

+0.5

+0.5 0

11.0

+0 0.6

11.0

+0.1 0.6

3.5

0.3

[mm]

28.0

0.5

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C

23C
0.1

60C 100C

0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

30 40

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 41

FEI 30
AL* (nH) 470025% Core constant C1 (mm-1) 0.52

Effective cross-sectional area Ae (mm2) 111

Effective magnetic path length Re (mm) 58.1

Effective volume Ve (mm3) 6457

Cross-sectional center leg area Acp (mm2) 114.5

Cross-sectional winding area of core Acw (mm2) 77

Weight (g/set) 35.0

*1kH 1mA 0.3 100T(Air Gap 0)

Shape and Dimensions

11.0 0 19.8 0.5 30.0

+0 0.6

16.0 21.0

+0.5 0 +0 0.6 +0 0.6

+0.5 0

11.0

11.0

5.5

0.2

30.0

0.5

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

23C
0.1

Pc (Watt)

23C
0.1

60C 100C

60C
0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

31 41

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 42

FEI 33
AL* (nH) 430025% Core constant C1 (mm-1) 0.57

Effective cross-sectional area Ae (mm2) 118.1

Effective magnetic path length Re (mm) 66.9

Effective volume Ve (mm3) 7909

Cross-sectional center leg area Acp (mm2) 124

Cross-sectional winding area of core Acw (mm2) 136

Weight (g/set) 41.5

*1kH 1mA 0.4 100T(Air Gap 0)

Shape and Dimensions

10.0 0 23.2 0.5 33.0

+0 0.6

18.8 23.3

+0.5 0

13.0

+0 0.6

0.3

13.0

+0 0.6

5.0

0.2

[mm]

33.0

0.5

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000
GAP 0.5 GAP 1.0 GAP 1.5

100

100

GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C 100C

60C

100C

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

32 42

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 43

FEI 35
AL* (nH) 365025% Core constant C1 (mm-1) 0.68

Effective cross-sectional area Ae (mm2) 99.9

Effective magnetic path length Re (mm) 67.3

Effective volume Ve (mm3) 6700

Cross-sectional center leg area Acp (mm2) 97.0

Cross-sectional winding area of core Acw (mm2) 127

Weight (g/set) 36.2

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions

10.3 0 25.0

+0 0.6

+0.8 0.5

35.0

18.0 23.8

+0.6 0

+0.7 0

10.0

+0 0.6

10.0

+0 0.6

5.5

0.2

35.0

+0.8 0.5

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

AL (nH)
100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C
0.1

60C 100C

60C
0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

33 43

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 44

FEI 35S
AL* (nH) 440025% Core constant C1 (mm-1) 0.56

Effective cross-sectional area Ae (mm2) 120

Effective magnetic path length Re (mm) 67.3

Effective volume Ve (mm3) 8090

Cross-sectional center leg area Acp (mm2) 117.0

Cross-sectional winding area of core Acw (mm2) 137

Weight (g/set) 41.5

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions

+0 0.6

+0.8 0.5

18.0 0 23.8

+0.6

+0.7 0

12.0

+0 0.6

12.0

+0 0.6

5.5

0.2

35.0 0.5

10.3 0 25.0

35.0

+0.8

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C 100C

60C

100C

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

34 44

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 45

FEI 40
AL* (nH) 475025% Core constant C1 (mm-1) 0.52

Effective cross-sectional area Ae (mm2) 140

Effective magnetic path length Re (mm) 76.8

Effective volume Ve (mm3) 11378

Cross-sectional center leg area Acp (mm2) 135.7

Cross-sectional winding area of core Acw (mm2) 163

Weight (g/set) 61.0

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions

27.2 40.0 0.5

+0 0.7

20.0 27.0

+0.5 0 +0 0.7 +0 0.7 0.3

+0.5 0

12.0

12.0

12.0

7.5

[mm]

40.0

0.5

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

23C 60C

Pc (Watt)

0.1

23C 60C

Pc (Watt)

0.1

100C

0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

35 45

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 46

FEI 50
AL* (nH) 595025% Core constant C1 (mm-1) 0.41

Effective cross-sectional area Ae (mm2) 230

Effective magnetic path length Re (mm) 94.7

Effective volume Ve (mm3) 2178

Cross-sectional center leg area Acp (mm2) 213.2

Cross-sectional winding area of core Acw (mm2) 249

Weight (g/set) 110.0

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions

34.0 0.7 50.0

+0 0.8

24.5 0 33.0

+0.5 +0 0.8 +0 0.8 0.3

+0.7 0

15.0

15.0

15.0

9.0

50.0

0.7

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0 GAP 0.1

23C 100C

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

AL (nH)
100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density


23C

f=100kHz
10

Core loss vs. Frequency


23C 60C 100C

Bm:200 (mT)

Pc (Watt)

0.1

60C

100C

Pc (Watt)
200 500

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

300

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

36 46

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 47

FEI 60
AL* (nH) 550025% Core constant C1 (mm-1) 0.44

Effective cross-sectional area Ae (mm2) 247

Effective magnetic path length Re (mm) 109

Effective volume Ve (mm3) 27148

Cross-sectional center leg area Acp (mm2) 243.4

Cross-sectional winding area of core Acw (mm2) 409

Weight (g/set) 140.0

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions

44.1 0.8 60.0

+0 0.8

27.5 0 35.5

+0.7 +0 0.8 +0 0.8 0.3

+0.7 0

16.0

16.0

16.0

8.5

60.0

0.8

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0 GAP 0.2

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density


23C 60C

f=100kHz
10

Core loss vs. Frequency


23C

Bm:200 (mT)

60C 100C

Pc (Watt)

0.1

100C

Pc (Watt)
200 500

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

300

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

37 47

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 48

FEER 25.5
AL* (nH) 205025% Core constant C1 (mm-1) 1.16

Effective cross-sectional area Ae (mm2) 43.2

Effective magnetic path length Re (mm) 50.0

Effective volume Ve (mm3) 2157

Cross-sectional center leg area Acp (mm2) 44.2

Cross-sectional winding area of core Acw (mm2) 80.3

Weight (g/set) 10.8

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions


0.2

7.5

0.15

19.8min. 25.5
0.5

0.2

6.2

9.3

0.2

7.5

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000
GAP 0.1 GAP 0.2 GAP 0.5

100

100

GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C

23C
0.1

60C 100C

0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

38 48

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 49

FEER 28
AL* (nH) 300025% Core constant C1 (mm-1) 0.78

Effective cross-sectional area Ae (mm2) 85.3

Effective magnetic path length Re (mm) 66.8

Effective volume Ve (mm3) 5702

Cross-sectional center leg area Acp (mm2) 77.0

Cross-sectional winding area of core Acw (mm2) 114.8

Weight (g/set) 28.5

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions


11.4
0.25

9.9

0.25

21.2min. 28.5
+0.6 0.5

9.6 +0.3 0.2

14.0

0.2

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

23C
0.1

Pc (Watt)

23C
0.1

60C 100C

60C
0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

39 49

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 50

FEER 28L
AL* (nH) 254025% Core constant C1 (mm-1) 0.92

Effective cross-sectional area Ae (mm2) 87.4

Effective magnetic path length Re (mm) 78.3

Effective volume Ve (mm3) 6635

Cross-sectional center leg area Acp (mm2) 77.0

Cross-sectional winding area of core Acw (mm2) 149.1

Weight (g/set) 33.2

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions


11.4
0.25

9.9

0.25

21.2min. 28.5
+0.6 0.5

12.5 +0.3 0.25

16.9

0.25

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C 100C

60C 100C

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

40 50

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 51

FEER 34
AL* (nH) 293025% Core constant C1 (mm-1) 0.86

Effective cross-sectional area Ae (mm2) 96.6

Effective magnetic path length Re (mm) 83.0

Effective volume Ve (mm3) 8014

Cross-sectional center leg area Acp (mm2) 91.6

Cross-sectional winding area of core Acw (mm2) 186.3

Weight (g/set) 41.5

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions


11.1 +0 0.6

11.1+0 0.6 25.5min. 35.0


+0 1.6

11.8 +0.6 0

17.3

0.2

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

AL (nH)

GAP 0.2 GAP 0.5 GAP 1.0

100

100

GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C

60C 100C

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

41 51

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 52

FEER 35
AL* (nH) 350025% Core constant C1 (mm-1) 0.72

Effective cross-sectional area Ae (mm2) 110.1

Effective magnetic path length Re (mm) 79.0

Effective volume Ve (mm3) 8695

Cross-sectional center leg area Acp (mm2) 100.3

Cross-sectional winding area of core Acw (mm2) 160.3

Weight (g/set) 45.0

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions


11.3
0.25

11.3

0.25

25.6min. 35.0
0.7

0.3

10.8

16.8

0.3

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000
GAP 0.2 GAP 0.5 GAP 1.0

AL (nH)

100

100

GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C
0.1

60C 100C

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

42 52

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 53

FEER 35L
AL* (nH) 290025% Core constant C1 (mm-1) 0.87

Effective cross-sectional area Ae (mm2) 108.4

Effective magnetic path length Re (mm) 94.5

Effective volume Ve (mm3) 10248

Cross-sectional center leg area Acp (mm2) 100.3

Cross-sectional winding area of core Acw (mm2) 220.5

Weight (g/set) 50.7

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


11.3 11.3
0.25 0.25

25.6min. 35.0
0.5

0.3

14.7

20.7

0.3

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000
GAP 0.2 GAP 0.5 GAP 1.0

AL (nH)

100

100

GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C

60C 100C

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

43 53

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 54

FEER 39
AL* (nH) 320025% Core constant C1 (mm-1) 0.79

Effective cross-sectional area Ae (mm2) 123.2

Effective magnetic path length Re (mm) 97.1

Effective volume Ve (mm3) 11970

Cross-sectional center leg area Acp (mm2) 122.7

Cross-sectional winding area of core Acw (mm2) 259.9

Weight (g/set) 60.0

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


12.8 +0 0.6

12.8 +0 0.6 29.3min. 38.9 +1.1 0.7

14.2 +0.8 0

20.0 +0 0.4

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

100

100

GAP 2.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C 100C

60C 100C

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

44 54

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 55

FEER 39L
AL* (nH) 315025% Core constant C1 (mm-1) 0.80

Effective cross-sectional area Ae (mm2) 131.9

Effective magnetic path length Re (mm) 106.1

Effective volume Ve (mm3) 13993

Cross-sectional center leg area Acp (mm2) 128.7

Cross-sectional winding area of core Acw (mm2) 280.5

Weight (g/set) 70.0

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


12.8
12.8
0.2

28.7min. 39.0
0.6

0.25

17.0

22.2

0.3

0.25

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C 60C 100C

23C 60C 100C

0.1

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

45 55

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 56

FEER 40
AL* (nH) 375025% Core constant C1 (mm-1) 0.67

Effective cross-sectional area Ae (mm2) 152.8

Effective magnetic path length Re (mm) 102.4

Effective volume Ve (mm3) 15637

Cross-sectional center leg area Acp (mm2) 138.9

Cross-sectional winding area of core Acw (mm2) 247.9

Weight (g/set) 78.1

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


13.3
13.3
0.25

29.0min. 40.0
0.5

0.25

15.4

22.4

0.2

0.25

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency


23C 60C

Bm:200 (mT)

23C

Pc (Watt)

Pc (Watt)

0.1

60C 100C

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

46 56

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 57

FEER 42
AL* (nH) 455025% Core constant C1 (mm-1) 0.56

Effective cross-sectional area Ae (mm2) 182.5

Effective magnetic path length Re (mm) 101.8

Effective volume Ve (mm3) 18574

Cross-sectional center leg area Acp (mm2) 181.5

Cross-sectional winding area of core Acw (mm2) 241.0

Weight (g/set) 86.6

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


15.2
0.2

15.2

0.2

30.5min. 42.0
0.6

15.0 +0.5 0

21.2

0.2

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency


23C 60C 100C

Bm:200 (mT)

23C 60C 100C

Pc (Watt)

Pc (Watt)
200 500

0.1

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

300

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

47 57

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 58

FEER 42A
AL* (nH) 570025% Core constant C1 (mm-1) 0.44

Effective cross-sectional area Ae (mm2) 232.5

Effective magnetic path length Re (mm) 101.4

Effective volume Ve (mm3) 23572

Cross-sectional center leg area Acp (mm2) 235.1

Cross-sectional winding area of core Acw (mm2) 228.8

Weight (g/set) 118.0

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


20.0 +0 0.8
17.3 31.8min. 42.0 0.5
0.25

15.0 +0.5 0

21.2

0.2

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

GAP 0.2

AL (nH)

1000

1000

AL (nH)

GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density


23C 60C

f=100kHz
10

Core loss vs. Frequency


23C 60C 100C

Bm:200 (mT)

Pc (Watt)

0.1

100C

Pc (Watt)
200 500

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

300

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

48 58

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 59

FEER 44
AL* (nH) 400025% Core constant C1 (mm-1) 0.63

Effective cross-sectional area Ae (mm2) 172.0

Effective magnetic path length Re (mm) 108.7

Effective volume Ve (mm3) 18707

Cross-sectional center leg area Acp (mm2) 172.0

Cross-sectional winding area of core Acw (mm2) 306.7

Weight (g/set) 88.6

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


15.2 +0 0.8

15.2 +0 0.8 32.5min. 43.8 +1.2 0.8

16.1 +0.6 0

22.5 +0 0.4

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0 GAP 2.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density


23C

f=100kHz
10

Core loss vs. Frequency


23C 60C 100C

Bm:200 (mT)

Pc (Watt)

0.1

60C

100C

Pc (Watt)
200 500

0.1

0.01

0.01

0.001

50

100

Flux density Bm (mT)

300

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

49 59

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 60

FPQ 2016
AL* (nH) 380025% Core constant C1 (mm-1) 0.61

Effective cross-sectional area Ae (mm2) 62

Effective magnetic path length Re (mm) 37.4

Effective volume Ve (mm3) 2310

Cross-sectional center leg area Acp (mm2) 61

Cross-sectional winding area of core Acw (mm2) 47.4

Weight (g/set) 13

*1kH 1mA 0.4 100T(Air Gap 0)

Shape and Dimensions


20.9 0.8 17.6 0 9.0
+0.8 +0 0.4 +0

12.0

5.0 0 5.0 0

+0.3

8.2

+0 0.2

8.2 0.2

+0.3

+0

14.4 0.8

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

1000

1000

AL (nH)

GAP 0.1 GAP 0.2 GAP 0.5

100

100

GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C 100C

23C
0.1

60C 100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

50 60

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 61

FPQ 2020
AL* (nH) 315025% Core constant C1 (mm-1) 0.74

Effective cross-sectional area Ae (mm2) 62

Effective magnetic path length Re (mm) 45.4

Effective volume Ve (mm3) 2790

Cross-sectional center leg area Acp (mm2) 61

Cross-sectional winding area of core Acw (mm2) 65.8

Weight (g/set) 15

*1kH 1mA 0.4 100T(Air Gap 0)

Shape and Dimensions


20.9
+0 0.8 +0.8

17.6 0 9.0

+0 0.4

12.0

0 +0 0.2

+0.3 0

7.0 7.0

+0.3 0

10.2

+0 0.2

10.2

14.4

+0 0.8

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

AL (nH)

GAP 0.1 GAP 0.2 GAP 0.5

100

100

GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C 100C

23C
0.1

60C 100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

51 61

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 62

FPQ 2620
AL* (nH) 600025% Core constant C1 (mm-1) 0.39

Effective cross-sectional area Ae (mm2) 119

Effective magnetic path length Re (mm) 46.3

Effective volume Ve (mm3) 5490

Cross-sectional center leg area Acp (mm2) 113

Cross-sectional winding area of core Acw (mm2) 64.4

Weight (g/set) 31

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions


26.95 0.9 22.05 0 12.2
+0 +0.9 +0 0.4

+0.3

5.6 0 5.6 0

10.2

+0 0.25

+0.3

10.2

+0 0.25

15.5

19.45 0.9

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

23C
0.1

Pc (Watt)

23C
0.1

60C 100C

60C
0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

52 62

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 63

FPQ 2625
AL* (nH) 500025% Core constant C1 (mm-1) 0.47

Effective cross-sectional area Ae (mm2) 118

Effective magnetic path length Re (mm) 55.5

Effective volume Ve (mm3) 6530

Cross-sectional center leg area Acp (mm2) 113

Cross-sectional winding area of core Acw (mm2) 84.5

Weight (g/set) 36

*1kH 1mA 0.5 100T(Air Gap 0)

Shape and Dimensions


26.95 0.9 22.05 0
+0 +0.9 +0

12.2 0.4 19.45 0.9 12.5 12.5

15.5

0 +0 0.25 +0 0.25

7.9

+0.3 0

7.9

+0.3 0

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

GAP 0.1 GAP 0.2 GAP 0.5 GAP 1.0

AL (nH)
100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C
0.1

60C

100C

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

53 63

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 64

FPQ 3220
AL* (nH) 731025% Core constant C1 (mm-1) 0.33

Effective cross-sectional area Ae (mm2) 170

Effective magnetic path length Re (mm) 55.5

Effective volume Ve (mm3) 9420

Cross-sectional center leg area Acp (mm2) 142

Cross-sectional winding area of core Acw (mm2) 80.8

Weight (g/set) 42

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions


32.5 1.0 27.0 0
+1.0 +0 +0

13.7 0.5
+0 1.0

19.0

+0.3 0

5.6 5.6

10.4

+0 0.25

10.40.25

+0.3 0

+0

22.5

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

GAP 0.1

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

23C
0.1

Pc (Watt)

23C
0.1

60C 100C

60C
0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

54 64

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 65

FPQ 3230
AL* (nH) 515025% Core constant C1 (mm-1) 0.46

Effective cross-sectional area Ae (mm2) 161

Effective magnetic path length Re (mm) 74.6

Effective volume Ve (mm3) 11970

Cross-sectional center leg area Acp (mm2) 142

Cross-sectional winding area of core Acw (mm2) 149.6

Weight (g/set) 55

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions


32.5 1.0 27.0 0
+1.0 +0 +0

13.7 0.5
+0 1.0

19.0

0 +0 0.25 +0.3 0

10.5
+0.3 0

10.5

15.3

+0 0.25

15.3

22.5

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

GAP 0.1

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C 60C

60C

0.1

100C

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

55 65

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 66

FPQ 3535
AL* (nH) 490025% Core constant C1 (mm-1) 0.45

Effective cross-sectional area Ae (mm2) 196

Effective magnetic path length Re (mm) 87.9

Effective volume Ve (mm3) 17260

Cross-sectional center leg area Acp (mm2) 162

Cross-sectional winding area of core Acw (mm2) 220.6

Weight (g/set) 73

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


35.7 31.5
+0 1.2 +1.0 0 +0

14.6 0.5

23.5

0 +0 0.25 +0.3

12.350 12.350

+0.3

17.5

+0 0.25

17.5

26.5

+0 1.0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

GAP 0.1

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency


23C 60C

Bm:200 (mT)

23C 60C 100C

Pc (Watt)

Pc (Watt)

0.1

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

56 66

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 67

FPQ 4040
AL* (nH) 470025% Core constant C1 (mm-1) 0.51

Effective cross-sectional area Ae (mm2) 201

Effective magnetic path length Re (mm) 101.9

Effective volume Ve (mm3) 20450

Cross-sectional center leg area Acp (mm2) 174

Cross-sectional winding area of core Acw (mm2) 326

Weight (g/set) 95

*1kH 1mA 0.7 100T(Air Gap 0)

Shape and Dimensions


41.4 1.8 36.4 0
+1.2 +0 +0

15.2 0.5
+0 1.2

28.0

14.6 0 14.6 0

+0.3

20.0

+0 0.25

20.0 0.25

+0.3

+0

28.6

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0 GAP 0.1

23C 100C

AL (nH)

AL (nH)

1000

1000

GAP 0.2 GAP 0.5 GAP 1.0

100

100

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency


23C 60C

Bm:200 (mT)

23C 60C 100C

Pc (Watt)

Pc (Watt)

0.1

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

57 67

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 68

FQK 1623
AL* (nH) 170025% Core constant C1 (mm-1) 1.41

Effective cross-sectional area Ae (mm2) 31.3

Effective magnetic path length Re (mm) 44.1

Effective volume Ve (mm3) 1377

Cross-sectional center leg area Acp (mm2) 24.6

Cross-sectional winding area of core Acw (mm2) 31.9

Weight (g/set) 9.6

*1kH 1mA 0.4 100T(Air Gap 0)

Shape and Dimensions

9.0 0.5 3.0


0.2

5.8 0.2 12.5


0.3

+0

16.5 0.3 11.8 0.2 11.8 0.2

8.7 8.6 0
+0.25

8.6 0

+0.25

+0

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
23C 100C
GAP 0

AL (nH)

AL (nH)

1000

1000
GAP 0.1 GAP 0.2

100

100

GAP 0.5 GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency


23C 60C

Bm:200 (mT)

Pc (Watt)

0.1

60C 100C

Pc (Watt)

23C

0.1

100C

0.01

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

58 68

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 69

FQK 2522
AL* (nH) 320025% Core constant C1 (mm-1) 0.72

Effective cross-sectional area Ae (mm2) 67.9

Effective magnetic path length Re (mm) 49.0

Effective volume Ve (mm3) 3327

Cross-sectional center leg area Acp (mm2) 58.1

Cross-sectional winding area of core Acw (mm2) 48

Weight (g/set) 21.0

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions

13.5

0.5

3.0
0.3

8.8 0.4 19.0 25.0


0.3 0.4

+0

12.9 8.05 0 8.05 0


+0.3

11.3

+0 0.2

11.3 0.2

+0.3

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

AL (nH)

GAP 0.1 GAP 0.2 GAP 0.5

100

100

GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

0.1

23C 60C

23C
0.1

60C 100C

0.01

100C

0.01

0.001

50

100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Ferrite Cores Cores VOL.05 VOL.06

59 69

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

033~070_E_5 12.10.10 9:37 AM 70

FQK 2532
AL* (nH) 250025% Core constant C1 (mm-1) 0.91

Effective cross-sectional area Ae (mm2) 70.3

Effective magnetic path length Re (mm) 64.0

Effective volume Ve (mm3) 4498

Cross-sectional center leg area Acp (mm2) 58.1

Cross-sectional winding area of core Acw (mm2) 73.8

Weight (g/set) 30.0

*1kH 1mA 0.6 100T(Air Gap 0)

Shape and Dimensions

13.5 0.5 3.0 12.9 0.3 8.8 0.4 19.0 0.3 25.0 0.4
+0 +0.3 +0.3 0

11.9

16.0

+0 0.2

16.0 0.2

11.9 0

+0

[mm]

10000

AL Value vs. Total gap length

10000

DC Pre-magnetization characteristics
GAP 0

23C 100C

AL (nH)

1000

1000

AL (nH)

GAP 0.1 GAP 0.2

GAP 0.5

100

100

GAP 1.0

10 0.01

0.1

Air gap length (mm)

1.0

10

10 0.1

NI (AT)

10

100

1000

10

Core loss vs. Flux density

f=100kHz
10

Core loss vs. Frequency

Bm:200 (mT)

Pc (Watt)

Pc (Watt)

23C
0.1

23C
0.1

60C 100C

60C
0.01

0.01

100C
0.001 50 100

Flux density Bm (mT)

200

300

500

0.001 20

Frequency (kHz)

50

100

150

200

Ferrite Cores VOL.06 VOL.05

60 70

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

Precautions

The names of the products and the specifications in this

catalog are subject to change without notice for the sake

Descriptions in this catalog regarding product

of improvement. The manufacturer also reserves the right to discontinue any of these products. At the time of delivery, please ask for specifications sheets to check the contents in order to use the products properly and safely. characteristics and quality are based solely on discrete

The manufacturer's warranty will not cover any

components. When using these components, be sure to check the specifications with the component in question mounted on the products.

products that deviates from the characteristics, specifications, or conditions for use described in this catalog. The products in this catalog are intended for use in ordinary electronic products. If any of these products are to be used in special applications requiring extremely high reliability, such as in aviation equipment and nuclear power controllers where product defects might pose a safety risk, please consult your NEC TOKIN sales representatives.
Though the manufacturer has taken all possible

disadvantage or damage caused by improper use of the

Please be advised that the manufacturer accepts no

precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fire, or similar accident. If you have any questions regarding the use of the products in question, please consult your NEC TOKIN sales representatives. responsibility for any infraction by users of the manufacturers products on third party patents or industrial copyrights. The manufacturer is responsible only when such infractions are attributable to the structural design of the product and its manufacturing process.

Export Control

For customers outside Japan NEC-TOKIN products should not be used or sold for use

in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons(nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to theForeign Exchange and Foreign Trade Lawof Japan,the export license specified by the law is required
This catalog is current as of December 2012.

for export.

All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2012.12.13 9603FERVOL06E1212H1

You might also like