Professional Documents
Culture Documents
Psi-Therm 2011
Datum: 9.11.2012
Wrmebrckenberechnung (f-Wert)
Nr. U1 U2
Name U1 U2
Seite:
Bauvorhaben:
Psi-Therm 2011
Datum: 9.11.2012 Materiallegende: Name Normal concrete (2400) Normal mortar YTONG Multipor light mortar YTONG Multipor mineral insulation board WI Normal mortar YTONG plan block PPW 2 / 0, 40 - 0.10 Randbedingungen und Wrmestrme: Nr Temp R1 -R2 -R3 -15.00 C R4 20.00 C Mindestwrmeschutz nach DIN 4108-2 kritische Oberflchentemperatur (Tsi) f-Wert
Lambda 2.100 W/(mK) 0.870 W/(mK) 0.180 W/(mK) 0.045 W/(mK) 1.000 W/(mK) 0.100 W/(mK)
+17.00 C 0.91
Seite:
Bauvorhaben:
Psi-Therm 2011
Datum: 9.11.2012 Eingabedaten - Materialbereiche Bild Name M1
Name Contour
Bild M2
Name Contour
Contour
1 2 3 4
Bild M3
Name Contour
Contour
1 2 3 4
Bild M4
Name Contour
Bild M5
Name Contour Xella Deutschland GmbH
Seite:
Bauvorhaben:
Psi-Therm 2011
Datum: 9.11.2012 Eingabedaten - Materialbereiche Bild Name M6
Name Contour
Rsi/Rse -Y
Lnge 0.42 m
-0.34 m -0.34 m
R2
Starting point Endpoint
Name adiabat
Rsi/Rse -Y
Lnge 0.42 m
+1.66 m +1.66 m
R3
Starting point Endpoint
Temperature -15.00 C
X -0.07 m -0.07 m
Rsi/Rse 0.04
Y
Lnge 2.00 m
+1.66 m -0.34 m
R4
Starting point Endpoint
Temperature +20.00 C
X +0.35 m +0.35 m
Rsi/Rse 0.25
Y
Lnge 2.00 m
-0.34 m +1.66 m
U-Wert 0.24 Y +1.10 m U-Wert 0.27 Y +0.11 m Ausrichtung 180 Ausrichtung 180
Fx 1.00
U2
Fx 1.00
Seite:
Bauvorhaben:
Psi-Therm 2011
Datum: 9.11.2012
********************************************************************** f - VALUE CALCULATION ********************************************************************** N E T W O R K G E N E R A T I O N Combining the thermal bridge areas... ready Generation of the element cells There were : 3031 Element cells produced. Topology optimization... ready E N D : N E T W O R K G E N E R A T I O N Assembling the finite element structure... ready Number of Elemente_____:4156 Number of Knoten_______:2225 S T A R T : F I N I T E E L E M E N T C A L C U L A T I O N Initialize matrices...Number of nodes 2225 Assembling the stiffness matrix and load vector... ready Begin the iteration. According to the method of conjugate gradient: ... Done, the system of equations was solved. Number of iterations 470 The temperatures in the network nodes are calculated. E N D : F I N I T E E L E M E N T C A L C U L A T I O N ********************************************************** *** CONVERGENCE TEST ********************** *** To DIN10211:2008-04, A.2 ********************** Convergence - structure... ready Number of Elemente_____:16624 Number of Knoten_______:8605 S T A R T : F I N I T E E L E M E N T C A L C U L A T I O N Initialize matrices...Number of nodes 8605 Assembling the stiffness matrix and load vector... ready Begin the iteration. According to the method of conjugate gradient: ... Done, the system of equations was solved. Number of iterations 1151 The temperatures in the network nodes are calculated. E N D : F I N I T E E L E M E N T C A L C U L A T I O N Sum of absolute values of all penetrating heat flows: from the baseline [W/m]:18.26 from the Konvergenzberechung [W/m]:18.247 Convergence [%] 0.1 <= 1 ============================== ********************************************************** *** S U R F A C E T E M P E R A T U R E S ****** Boundary conditions Boundary condition Type Heat flow Length Temperature Rs(i,e) Calculation of heat flows 1 Neumann 0.00 0.42 --4 Robin 18.25 2.00 20.00 0.25 3 Robin -18.25 2.00 -15.00 0.04 2 Neumann 0.00 0.42 --Minmal surface temperatures: Indoors 17.00[C] at position : X 0.35[m] Y 0.59[m] ========= Outdoors -14.72[C] at position : X -0.07[m] Y 0.64[m] ========= Minimum Insulation according to DIN 4108-2 for 2-temperature conditions: critical surface temperature (Tsi): 17.00 [C]
Seite:
Bauvorhaben:
Psi-Therm 2011
Datum: 9.11.2012
(Ti) : 20.00 [C] (Te) : -15.00 [C] = 0.91 > 0.7 ============ ********************************************************** *** E N D of C A L C U A L T I O N *** ********************************************************** Room temperature Outdoor temperature f_Rsi = (Tsi-Te) / (Ti-Te)
Seite: