Professional Documents
Culture Documents
Aziz Nagar Gate, C.B. Post, Hyderabad 500 075 Department of Electronics and Communication Engineering
ABSTRACT
OBJECTIVE:
The main aim of this project is to develop a system, which uses Gesture Control technology that keeps monitoring of the various appliances, and will control the operation of these appliances with respect to the gesture done by your hand.
INTRODUCTION:
The goal of the project is to develop a system, which uses Accelerometer Sensor to detect motion and controls various appliances of the home, which executes with respect to the gesture. For utilization of appliances the new concept has been thought to manage them by using Accelerometer, which enables the user to control switching of domestic appliances. The ranges of appliances that can be controlled through accelerometer are many in numbers. Some of them are as follows and this depends upon the usage priority of the appliances i.e. parking Lights, Music System or other electrical / electronic appliances. .
TECHNOLOGY: Accelerometer: Accelerometer is a sensor which detects the motion in x,y,z directions and gives the outputs in those axis. So the motion in x direction can be measured from the output of x output pin on the accelerometer and once the motion is detected the microcontroller can be programmed such that a particular action can be performed. RF Transmitter and Receiver : The output received from the accelerometer can be transmitted by the RF transmitter to the receiver which can be used to control the loads through the relays.
BLOCK DIAGRAM:
RF Receiver
LCD
LAMP1
Accelerometer
RELAY2 DRIVERS
LAMP2 DC FAN
DRIVERS
DC MOTOR
POWER SUPPLY:
Step Down Transformer Bridge Rectifier Filter Circuit Regulator section
SOFTWARE AND HARDWARE TOOLS: Software Tools: 1. Embedded C 2. Keil IDE 3. Uc-Flash Hardware Tools:
1. Micro controller 2. Power supply 3. LCD 4. Accelerometer 5. RF Transmitter/Receiver 6. Relays 7. Drivers 8. Appliances
APPLICATIONS:
1. We can use this system in automation of industries. 2. Used for Industrial security purpose.
RESULT:
By using this project we can implement an automation system in a home to control different devices which reduces a lot of manual power and correspondingly provides the flexibility and reliability.
Controlling the home appliances and electronics gadgets through an Infrared remote control is now in general. But the same controlling tasks can be done more easily. Primary motive of proposing the new system of hand gesture remote control is to remove the need to look in to the hand held remote and to search for a specific key for specific function. This paper presents a novel system to control home appliances through hand gesture as a remote control device. The system will referred to as Handmote in this paper. It uses real time image processing for hand gesture recognition in infrared vision using Blobscanner [1] library and microcontroller development board , Arduino[2]. This paper proposes a possible solution to control the gadgets for physically challenged and blind people.