Professional Documents
Culture Documents
MUSTANG
MUSTANG MUSTANG GT / 4.6L
COBRA / 4.6L
MODELS / 3.8L (SOHC)
(DOHC)
Ford (EFHD Ypsilanti) Motorcraft -
Ford (EFHD Ypsilanti) -
Motor - Manufacturer - Permanent Magnet Permanent Magnet
Permanent Magnet Type
Type Type
Motor -Current drain at
300 - 400 Amps. 300 - 400 Amps. 260 - 390 Amps.
deg. C (deg. F)
Motor - Power rating
1.4 (1.9) 1.4 (1.9) 1.5 (2.0)
kw (hp)
Motor drive -
Positive (E9SF-BA) Positive (F2VU-AA) Positive (F3LU-AA)
Engagement type
Motor drive - Pinion
Front; Conventional
engages from (front, Front Front
Axial mount
rear)
Electrical - Suppression
Body
ALL MODELS
Structure Unitized All-Steel Welded Body w/ Multi-Piece Side Stampings and Energy-
Absorbing Front and Rear Structures
Bumper Impact resistant Rim Urethane Fascias w/ Ultra High Strength Steel
system: front- Understructure at Front and Rear. Front/Rear - 5 MPH Bumpers - Ford
rear Requirements
Major Exterior and Underbody Sheet Metal Components and Panels Pre-Coated
Anti-corrosion
(Galvanized) Steel. Body Cathodically Electrocoat Primed. Urethane Chip-
treatment
Resistant Primer. Grille: Integral w/ Polyurethane Fascia.
ALL MODELS
Type of finish (lacquer, enamel,
Enamel Acrylic (All colors clearcoat except white)
other)
Hood - Material & mass Composite (SMC), 15 (33)
Hood - Hinge location (front, rear) Rear
Hood - Type (counterbalance, prop) Prop
Hood - Release control (internal,
Primary - Internal; Secondary - external
external)
Trunklid - Material & mass Steel, 16.3 (36)
Trunklid - Type (counterbalance,
Counterbalance - Gas spring
other)
Trunklid - Internal release control
Electric (with power lock group)
(elec, mech, na)
Vent window control (crank,
friction, pivot, power) N/A
Front
Vent window control (crank,
friction, pivot, power) N/A
Rear
Window regulator type (cable, tape,
flex drive, etc.) Mechanical drive (cross arm)
Front
Window regulator type (cable, tape,
N/A except convertible; Convertible - Mechanical drive
flex drive, etc.)
(single arm)
Rear
Seat cushion type (e.g., 60/40,
Bucket, stamped frame - coil springs and flexolater -
bucket, bench, wire, foam, etc.)
Foam pad. Articulated front sport seats standard w/ GT.
Front
Seat cushion type (e.g., 60/40,
bucket, bench, wire, foam, etc.) Bench, Integral frame and foam pad assembly
Rear
Seat cushion type (e.g., 60/40,
bucket, bench, wire, foam, etc.) None
3rd seat
Seat back type (e.g., 60/40, bucket,
Bucket, stamped frame - foam pad. Articulated front
bench, wire, foam, etc.)
sports seats standard w/ GT.
Front
Seat back type (e.g., 60/40, bucket,
Bench, frm. hdbrd. w/ foam pad assy on convertible (fold
bench, wire, foam, etc.)
down, split 50/50 for coupe)
Rear
Seat back type (e.g., 60/40, bucket,
bench, wire, foam, etc.) None
3rd seat
Frame
ALL MODELS
Type and description (seperate frame, unitized frame,
Unitized construction
partially-unitized frame)