Professional Documents
Culture Documents
Engine Description
Engine - Pistons
Engine - Camshaft
4.6L (DOHC) w/
3.8L 4.6L (SOHC) w/ GT
COBRA
Hydraulic Lifters (std., Standard with Hydraulic Lash Adjuster Hydraulic Lash Adjuster
opt., n.a.) roller tappets (w/ roller follower) (w/ roller follower)
Valves - Number
6/6 8/8 16 / 16
intake/exhaust
Valves - Head O.D. 45 (1.77) / 37
44.5 (1.75) / 34 (1.34) 37 (1.46) / 30 (1.18)
intake/exhaust (1.46)
Engine - Crankshaft
4.6L (DOHC) w/
3.8L 4.6L (SOHC) w/ GT
COBRA
Material & mass kg. Nodular Cast Iron and Nodular Cast Iron, Forged Steel, 23.0
(weight, lbs)* 14.06 (31) 19.6 (43.3) (50.0)
End thrust taken by bearing
#3 #5 #5
(no.)
Length & number of
4 19 (0.75), 5 19 (0.75), 5
bearings
Seal - Front (material, one, Flourocarbon, One Flouroelastomer, One
Silicon, One piece
two piece design, etc.) piece piece
Seal -Rear (material, one, Flouroelastomer, One Silicon, One piece
Flourocarbon, Dual lip
two piece design, etc.) piece w/ slinger
4.6L (DOHC) w/
3.8L 4.6L (SOHC) w/ GT
COBRA
Normal oil pressure kPa 276 - 414 (40 - 60) @ 276 - 414 (40 -60) @ 210 - 350 (30 - 50) @
(psi) @ engine rpm 2000 RPM 2000 RPM 2000 RPM
Type oil intake (floating, Stationary shrouded Stationary shrouded Stationary shrouded
stationary) screen in sump screen in sump screen in sump
Oil filter system (full flow,
Full Flow Full Flow Full Flow
part, other)
Capacity of c/case, less 4.5 (4.8) less 0.5 (0.5) 5.7 (6.0) less 0.47 5.7 (6.0) less 0.47
filter-refill-L (qt) for filter (0.5) for filter (0.5) for filter