You are on page 1of 14

About SIUI

SIUI product adopts:


Highly advanced manufacturing facility
With an aim to reach advanced international level, SIUI strictly executes every step of development,
purchase, production, sales and after sales service according to related international and national quality
standards.
Rigorous production environment control
Strict product testing and inspection equipment

International Advanced SMT Production Line Environmental Chamber World-leading Probe Inspection System
Shantou Institute of Ultrasonic Instruments Co.,Ltd.
(SIUI) is a shareholding key high-tech enterprise in NDT
industry. We are specialized in R&D, manufacture and
distribution of ultrasonic testing equipments, ultrasonic
probes and accessories.
With more than 30 years professional UT experience,
SIUI manufactures ultrasonic probes for applications as
diverse as flaw detection, thickness gauging, materials
research etc. SIUI can provide more than 500 types of
probes and we also accepts customization.
Normal Probe
There are three series of normal probes for your selection:
1.Mid Frequency Series
2.Wide Frequency Series(Heavy Damping)
3.Wide Frequency Series
Application:
Medium pulse, medium damping best combination of gain and resolution
Medium Bandwidth typical -6dB bandwidth range 30%~50%
Wide Bandwidth typical -6dB bandwidth range 50%~100%
High signal-to-noise in composite materials
Short pulse, Higher resolution than Mid Frequency series
Wide Bandwidth typical -6dB bandwidth range 60%~120%
Mainly used for testing defects parallel to or slightly
tilted against the test surface (e.g. steel plate)
Ordering Information:
P2-20L
P: Series Code L: Connector Type
2: Frequency 20: Crystal dimension 20
* All probes are EN-12668-2 compliant.
Wide Frequency Series (Heavy Damping)
Mid Frequency Series
Wide Frequency Series
* LEMO 01 is only available for those crystal size 24mm .
* Probes with crystal size 6mm are only compatible with LEMO 00 and Microdot.
Replaceable Membrane Normal Probe
There are two series of Replaceable Membrane Normal probes for your selection:
1.Mid Frequency Series
2.Wide Frequency Series
Application:
Medium Pulse and Medium Damping perfect combination of gain and resolution
Medium Bandwidth typical -6dB bandwidth range 30%~50%
Higher Penetration, Higher Signal-to-noise,
Higher Resolution, Higher Sensitivity than Mid Freq Series
Medium Bandwidth typical -6dB bandwidth range 60%~120%
Mainly used for inspecting container flaws as well as flaws
parallel to the inspected surface,applicable for checking
coarse and slightly-curved surfaced objects.
RP2-25L
RP: Series Code L: Connector Type
2: Frequency 25: Crystal dimension 25
Ordering Information:
Mid Frequency Series
Wide Frequency Series
* LEMO 01 is only available for those crystal size 24mm .
Replaceable Delay Line Normal Probe
Ordering Information:
D2.5-10L
D: Series Code L: Connector Type
2.5: Frequency 10: Crystal dimension 10
Surface Wave Probe
Ordering Information:
AS2.5-66L
AS: Series Code L: Connector Type
2.5: Frequency 66: Crystal dimension 66
Application:
Mainly used for inspecting flaws parallel to/ near to the inspected
object surface, applicable for inspected objects with sharp edge.
If the delay line is made of high-temperature material, it can also
inspect high-temperature objects.
Application:
Mainly used for surface defect testing and also for surface
crack depth testing.
* 7.5/10Mhz is also available, please refer to Thickness Gauge Probe series.
D Series
DM Series
Mid Frequency Series Wide Frequency Series
Angle Probe ( Transverse Wave )
There are two series of Transverse Angle probes for your selection:
1.Narrow Frequency Series
2.Mid Frequency Series
General purpose, recommended for the majority of applications
Medium Bandwidth typical -6dB bandwidth range from 20%~30%
Medium Pulse, Medium Damping best combination of gain and resolution
Medium Bandwidth typical -6dB bandwidth range from 30%~50%
Ordering Information:
AFN4-89-60L
AFN: Series Code L: Connector Type
4: Frequency 60: Angle
89: Crystal dimension 89
Narrow Frequency Series
Mid Frequency Series
* mm. LEMO 01 is only available for crystal size 20 20mm and 20 22
* Probes with crystal size 6 6mm are only compatible with LEMO 00 and Microdot.
Angle Probe ( Longitudinal Wave )
There are two series of Longitudinal Angle probes for your selection:
1.Narrow Frequency Series
2.Mid Frequency Series
General purpose, recommended for the majority of applications
Medium Bandwidth typical -6dB bandwidth range from 20%~30%
Medium Pulse, Medium Damping best combination of gain and resolution
Medium Bandwidth typical -6dB bandwidth range from 30%~50%
Ordering Information:
LFP2-1010-70L
LFP: Series Code L: Connector Type
2: Frequency 70: Angle
1010: Crystal Dimension 1010
Narrow Frequency Series
Mid Frequency Series
* . LEMO 01 is only available for crystal size 20 20mm and 20 22mm
* Probes with crystal size 6 6mm are only compatible with LEMO 00 and Microdot.
Angle Probe With Replaceable Wedge
There are two Frequency types for your selection:
1.Mid Frequency Series
2.Wide Frequency Series
General purpose, recommended for most applications
Medium Pulse and Medium Damping perfect combination of gain and resolution
Medium Bandwidth typical -6dB bandwidth range from 30%~50%
Gain is usually higher than Mid Freq Series
Wide Bandwidth typical -6dB bandwidth range from 60%~120%
Ordering Information:
ADP2-1616-70L
ADP: Series Code L: Connector Type
2: Frequency 70: Angle
1616:Crystal Dimension 1616
Mid Frequency Series (Transverse Wave ADP and Longitudinal Wave LDP)
Wide Frequency (Transverse Wave ADM and Longitudinal Wave LDM) Series
* Crystal size unit inch is also available: 1/4" 3 8" 1 2" , , . / /
* LEMO 01 is only available for those crystal size 24mm .
* Probes with crystal size 6mm are only compatible with LEMO 00 and Microdot.
Dual-Element Angle Probe
Application:
1.For TRANSVERSE WAVE type:
2.For LONGITUDINAL WAVE type:
Mainly used for testing defects tilted against the test surface or
perpendicular to the test surface
Mainly used for testing small near-surface defects, thin wall pipe,
and ring-type work piece.
Mainly used for macro-crystal welding inspection,
attenuating material and Austenitie welding.
For 70 degree angle, it can be applied for creeping wave.
Ordering Information:
TRT2-1010-70L
TRT: Series Code L: Connector Type
2: Frequency 70: Angle
1010: Crystal Dimension 1010
TRANSVERSE WAVE angle probes option:
Mid Frequency Series TRT
LONGITUDINAL WAVE angle probe option:
Mid Frequency Series TRL Wide Frequency Series TRTM Wide Frequency Series TRLM
Thickness Gauge Probe
Ordering Information:
TG2-12L
TG: Series Code L: Connector Type
2: Frequency 12: Crystal Dimension 12
Application:
Mainly used for measuring work piece thickness.
High Temperature Probe (Up to 200 )
Twin Crystal Probe
Delay Line Probe
( ) H for High temperature
( ) N for normal probe, which also be used for flaw detectors
( ) D for delay line probe, wide frequency series
TR Probe
Application:
Mainly used for testing defects parallel to
or slightly tilted against the test surface
(e.g. steel plate);
Much more appropriate for detecting near
surface flaws than normal probes.
Ordering Information:
TR2.5-14-30L
TR: Series Code L: Connector Type
2.5: Frequency 30: Focal Length
14: Crystal dimension 14
* All crystal sizes is for twin-element crystals.
Twin crystal
Single crystal
Single crystal
* Side connector is available.
(Please specify when order) *
Spot-Weld Probe
Application:
Straight-beam probe with soft protective membrane,
using water column as water delay coupling,
so as to achieve optimal coupling between
the probe and spot weld surface.
Especially good for spot-weld testing on thin
plates of automotive industry.
Ordering Information:
SW15-3L
SW: Series Code L: Connector Type
15: Frequency 3: Crystal dimension 3
TOFD Probe
Ordering Information:
T2.5-10L
T: Series Code L: Connector Type
2.5: Frequency 10: Crystal dimension 10
TOFD transducers and wedges generate refracted
longitudinal waves in steel for use in applications
involving crack sizing by means of the Time of Flight
Diffraction technique.
Application:
Weld detection for plate, boiler, pressure pipe and
pressure vessel etc..
Immersion Probe
There are two series of Immersion probes for your selection:
1.Narrow Frequency Series
2.Wide Frequency Series
Application:
General purpose, recommended for the majority of
applications
Medium Bandwidth typical -6dB bandwidth range
from 20%~30%
High signal-to-noise in composite materials
Short Pulse, Higher resolution than Narrow Frequency series
Wide Bandwidth typical -6dB bandwidth range 60%~120%
Mainly used in situations where the work piece and
the probe do not contact directly. It is suitable for
testing work piece with rough surface and automatic
testing required to increase scanning speed and
shorten testing time.
Ordering Information:
INM4-10-20L
INM: Series Code L: Connector Type
4: Frequency 20: Focal Length
10: Crystal dimension 10
Immersion Probe without focusing
Narrow Frequency Series Wide Frequency Series
Immersion Probe without focusing
Immersion Probe with Line Focusing Immersion Probe with Line Focusing
Immersion Probe with Point Focusing Immersion Probe with Point Focusing
Variable-angle Probe
Ordering Information:
AV2.5-1016L
AV: Series Code L: Connector Type
2.5: Frequency 1016: Crystal dimension 1016
Application:
The reflection angle can be adjusted to meet different
requirements.
There are different kinds of cable connectors for your selection.
Such as BNC, LEMO 01, LEMO 00, Microdot, UHF etc.
SIUI can provide custom ultrasonic probes
according to specific requirement.
Custom
Ultrasonic Probes
Calibration Block
Calibration Block No.1 (V1) Calibration Block No.2 (V2)
(Thickness 12.5mm Hole diameter 5mm )
Step Block
Width 40mm 7 steps each 40mm
Total length 280mm Height 3 12 24 30 36 42 48mm
[ : ; ( );
: ; : / / / / / / ]
Step Block
Width 40mm 7 steps each 40mm
Total length 280mm Height 1 1 5 2 4 6 8 10mm
[ : ; ( );
: ; : / . / / / / / ] V1 Specification V2 Specification
We can also provide various calibration blocks for ultrasonic purpose.

You might also like