No Quantity Description Type ( 200,characters) Item short
description Specification No 1 2 3 4 5 4 T01-Kuchinapudi to Pittupalem, Nagaram (M) Package . No. AP061402 I Road Part 1 42259.60 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD . including contractors profit & Over head charges, VAT. Jungle clearence Jungle clearence 201 MORD 2 35500.00 Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain (not exceeding 0.6 m depth) and foundation of other structures including breaking clods, ramming, spreading, sectioning, grading compacting with vibratory roller 80-100KN to OMC compaction including to a top width of 7.5m and raising to required height complete etc.as per requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 MORD/ 305 MORTH including contractors profit & Over head charges, VAT and Seigneorage. etc. complete. Earth work Earth work 301.5 MORD 3 4116.69 Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, VAT and Seigneorage etc. complete. Earth work Earth work 301.5 MORD 4 2837.64 Filling with sand for drainage layer of full widht as per drawing and technical specification clause 305.3.9 MORD & 304 MORTH, including Contractor profit & Overhead charges VAT and Seigneorgae. Sand filling Sand filling 305.3.9 MORD & 304 MORTH 5 3467.12 Construction of granular sub-base by providing well graded material(Table 400.1) with Grading III Material(HBG M/C +Stone dust) CBR Value not less than 20 and PI Value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD including contractors profit & Over head charges, VAT and Seigneorage etc. complete. Granular sub base Granular sub base 401 MORD Schedule-A S.No Quantity Description Type ( 200,characters) Item short description Specification No 6 3855.45 Construction of granular Shoulders by providing well graded meterial (i.e 9.5 mm to 4.75 mm size Gravel of 66% and Sand of size < 2.36 mm @ 34%) having soaked CBR not less than 15% and Plasticity Index < 6 and stacking at site to the departmentel gauge for pre measurements and mixing them and spreading the same with Tractor grader in uniform layers of loose thickness of not more than 225mm including mixing by mix in place method with rotavator and compacting at OMC with Vibratory roller 8 to 10 Tonnes capacity to achieve the desired density, complete as per IRC technical specification clause 402 (3) (iii) of MORD including contractors profit & Over head charges, VAT and Seigneorage etc., Granular shoulders Granular shoulders 303, 407 MORD and clause 305 & 305.4.4 MORTH 7 4693.98 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD/ MORTH, including contractors profit & Over head charges, VAT and Seigneorage etc., complete WMM WMM 406 MORD 8 267.10 Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm as per Technical Specification Clause 505 MORD. (using Three wheel 80-100 KN static Roller/ Vibratory Roller 80-100 kN). Built Up Spray Grout Built Up Spray Grout 505 MORD 9 31296.83 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) ,including contractors profit & Over head charges, VAT etc., complete for Prime Coat Prime coat Prime coat 502 MORD 10 47048.70 Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD, including contractors profit & Over head charges, VAT etc., complete for Tack Coat Tack coat Tack coat 503 MORD 11 46833.08 Providing, laying and rolling of close-graded premix surfacing (Mix seal surfacing) material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates as per Table 500.15 of MORD using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable Hot Mix plant (By mechanical means), laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 MORD, including contractors profit & Over head charges, VAT and Seigneorage Mix Seal surfacing Mix Seal surfacing 512 MORTH S.No Quantity Description Type ( 200,characters) Item short description Specification No 12 958.74 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including contractors profit & Over head charges, VAT and Seigneorage etc., complete CC pavement CC pavement 1501 MORD 13 206.96 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 of MORD 14 206.96 Filling in foundation trenches / Pipe bedding with Sand as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage. Sand filling Sand filling 305.3.9 MORD & 304 MORTH 15 152.63 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete. M15 Concrete M15 Concrete Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD Total II Road Furniture 16 12 Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 MORD / 804 MORTH including contractors profit & Over head charges, VAT and Seigneorage Ordinary KM Stone KM Stone KM Stone MORD 1703 17 58 Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 MORD / 804 MORTH including contractors profit & Over head charges, VAT and Seigneorage 200M Stone HM Stones HM Stones MORD 1703 S.No Quantity Description Type ( 200,characters) Item short description Specification No 18 4 Providing & fixing of typical PMGSY informatory sign board with LOGO as per MORD secifications and drawing. Three MS plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mmx5mm size on black on edges. The lower plate will be welded with MS angle iron frame of lower most plate and flate iron frame of middle plate will be welded to 2 nos 75mmx75mm of 12 SWG sheet tubes posts duly embedded in CC M15 grade blocks of 450mmx450mmx600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm of 12 SWG sheet plate tube. All MS will be stove enmeled on both sides. Lettering and paining of superior quality in required shede and colour. All sections of framed posts and sheet tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 if MORD including contractors profit & Over head charges, VAT and Seigneorage LOGO Board LOGO Board MORD 1701 19 11 Providing and erecting direction and place identifications of semi reflective sign boards up to 0.9 sqm size board as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. supported and welded on 47 mm x 47 mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 MORD including contractors profit & Over head charges, VAT and Seigneorage up to 0.9 sqm size board Sign Board Sign Board MORD 1701 20 68 Providing and fixing of semi-reflective cautionery, mandatory and informatory boards as per IRC:67 made of 1.5mm thick MS sheet duly stove enamelled paint in white colour in front and grey colour on back with red reflective boarder of 65mm width and required letters and figures with reflective engineering grade tape as per clause 1701.3.9 of MORD for rural roads specification of required shade and colour supported and welded on 47x47mm of 12 SWG square tube of 3050mm height duly strenthened by 25x5mm MS flat iron on edges on back firmly fixed to ground by means of properly designed foundations with M-15 grade CC 450x450x600 mm , 600mm below ground level as per approved drawings and technical specification Clause 1701.2.2 of MORD including contractors profit & Over head charges, VAT and Seigneorage with 600X 600 mm size MS sheet Information Board Information Board Clause 1701 MORD Total S.No Quantity Description Type ( 200,characters) Item short description Specification No III Constuction of 600 mm Dia pipe culverts (11 No) 21 130.37 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 of MORD 22 88.63 Filling in foundation trenches / Pipe bedding with Sand as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage. Sand filling Sand filling 305.3.9 MORD 23 39.39 Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage For levelling course PCC M10 PCC M10 Clause 802, 803, 1202 & 1203 MORD 24 113.95 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete. For Head walls and Parapet PCC M15 PCC M15 Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD 25 82.50 Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. Tech Specification Clause 1106 MORD ,including contractors profit & Over head charges, VAT and Seigneorage - For Pipe Culverts with 600mm dia NP3 pipes RCC NP3 Pipes RCC NP3 Pipes Clause 1106 MORD Total IV 1.0m Vent RCC Slab culvert at Km 0/0, 1/6+135 26 77.04 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 MORD 27 12.84 Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage For levelling course PCC M10 PCC M10 802, 803, 1202 & 1203 MORD S.No Quantity Description Type ( 200,characters) Item short description Specification No 28 44.37 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete. PCC M15 PCC M15 802, 804, 805, 806, 807, 1202 and 1204 MORD 29 2.70 Reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage (upto 5m height) Bed blocks RCC M25 RCC M25 Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD 30 5.67 Providing and laying reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage upto 5m height. - For Super Structure (Deck slab) RCC M25 RCC M25 Clauses 800, 1205.4 and 1205.5 MORD 31 0.40 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Sub Structures HYSD HYSD Clauses 1002, 1005, 1010 & 1202 MORD 32 2.03 Providing and laying cement concrete wearing course M 30 (Design Mix) grade using 20 & 10mm metal (HBG) mechanically mixed excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 MORD and 2702 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - 800 and 1206.3 MORD and 2702 MORTH 33 0.800 Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Super Structures HYSD HYSD Clauses 1002, 1010 and 1202 MORD Total S.No Quantity Description Type ( 200,characters) Item short description Specification No V 1.5m Vent RCC Slab culvert at 3/4+100 34 64.53 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 MORD 35 21.51 Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage For levelling course PCC M10 PCC M10 802, 803, 1202 & 1203 MORD 36 26.33 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete.Footings PCC M15 PCC M15 802, 804, 805, 806, 807, 1202 and 1204 MORD 37 1.80 Reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage (upto 5m height) Bed blocks RCC M25 RCC M25 Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD 38 3.62 Providing and laying reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage upto 5m height. - For Super Structure (Deck slab) RCC M25 RCC M25 Clauses 800, 1205.4 and 1205.5 MORD 39 1.01 Providing and laying cement concrete wearing course M 30 (Design Mix) grade using 20 & 10mm metal (HBG) mechanically mixed excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 MORD and 2702 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - 800, 1206.3 MORD 40 0.20 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Sub Structures HYSD HYSD Clauses 1002, 1005, 1010 & 1202 MORD S.No Quantity Description Type ( 200,characters) Item short description Specification No 41 0.50 Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Super Structures HYSD HYSD Clauses 1002, 1010 and 1202 MORD Total VI 2.5m Vent RCC Slab culvert at 1/0+135 42 79.16 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 MORD 43 10.38 Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage For levelling course PCC M10 PCC M10 802, 803, 1202 & 1203 MORD 44 81.72 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete.Footings PCC M15 PCC M15 802, 804, 805, 806, 807, 1202 and 1204 MORD 45 1.69 Reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage (upto 5m height) Bed blocks RCC M25 RCC M25 Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD 46 6.98 Providing and laying reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage upto 5m height. - For Super Structure (Deck slab) RCC M25 RCC M25 Clauses 800, 1205.4 and 1205.5 MORD 47 1.74 Providing and laying cement concrete wearing course M 30 (Design Mix) grade using 20 & 10mm metal (HBG) mechanically mixed excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 MORD and 2702 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - M30 Cement concrete M30 Cement concrete Clauses 800 and 1206.3 S.No Quantity Description Type ( 200,characters) Item short description Specification No 48 0.75 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Sub Structures HYSD HYSD Clauses 1002, 1005, 1010 & 1202 MORD 49 1.25 Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, VAT - For Super Structures HYSD HYSD Clauses 1002, 1010 and 1202 MORD Total VII Construction of Protection works/ retaining walls 50 102.60 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage - For Foundations Earth work Earth work 305 MORD 51 12.83 Filling in foundation trenches / Pipe bedding with Sand as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage. Sand filling Sand filling 305.3.9 MORD 52 12.83 Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage For levelling course PCC M10 Concrete PCC M10 Concrete 802, 803, 1202 & 1203 MORD 53 34.63 Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, VAT and Seigneorage etc. complete. PCC M15 Concrete PCC M15 Concrete 802, 804, 805, 806, 807, 1202 and 1204 MORD VIII Routine maintenance 54 14.24 Routine maintenance cost for 1st Year 1900 MORD S.No Quantity Description Type ( 200,characters) Item short description Specification No 55 14.24 Routine maintenance cost for 2nd Year 1900 MORD 56 14.24 Routine maintenance cost for 3rd Year 1900 MORD 57 14.24 Routine maintenance cost for 4th Year 1900 MORD 58 14.24 Routine maintenance cost for 5th Year 1900 MORD Grand Total Grand Total Total No. of Items (58) only (Rupees Six Crore Twelve lakhs Seventy five thousand seven hundred and ninty six and paise forty nine only) Sd/-22.2.2014 Engineer - In - Chief P.R, PMGSY, Hyderabad Rate Unit of measur ement Amount 5 6 7 2.00 Sqm 84519.20 108.60 Cum 3855300.00 211.30 Cum 869855.54 984.40 Cum 2793372.82 2123.40 Cum 7362082.61 Schedule-A Rate Unit of measur ement Amount 1662.40 Cum 6409300.08 2980.40 Cum 13989937.99 511.90 Cum 136728.49 40.80 Sqm 1276910.66 14.80 Sqm 696320.76 214.70 Sqm 10055062.28 Rate Unit of measur ement Amount 6297.30 Cum 6037473.40 92.90 Cum 19226.58 984.40 Cum 203731.42 4700.00 Cum 717361.00 54507182.83 1962.60 Nos 23551.20 552.50 Nos 32045.00 Rate Unit of measur ement Amount 9051.90 Nos 36207.60 2240.80 Nos 24648.80 1714.20 Nos 116565.60 233018.20 Rate Unit of measur ement Amount 92.90 Cum 12111.37 984.40 Cum 87247.37 4349.90 Cum 171342.56 4700.00 Cum 535565.00 3204.70 Rmt 264387.75 1070654.05 92.90 Cum 7157.02 4349.90 Cum 55852.72 Rate Unit of measur ement Amount 4700.00 Cum 208539.00 6511.20 Cum 17580.24 7084.40 Cum 40168.55 58088.30 MT 23235.32 6169.40 Cum 12523.88 59160.80 MT 47328.64 412385.37 Rate Unit of measur ement Amount 92.90 Cum 5994.84 4349.90 Cum 93566.35 4700.00 Cum 123751.00 6511.20 Cum 11720.16 7084.40 Cum 25645.53 6169.40 Cum 6231.09 58088.30 MT 11617.66 Rate Unit of measur ement Amount 59160.80 MT 29580.40 308107.03 92.90 Cum 7353.96 4349.90 Cum 45151.96 4700.00 Cum 384084.00 6511.20 Cum 11003.93 7084.40 Cum 49449.11 6169.40 Cum 10734.76 Rate Unit of measur ement Amount 58088.30 MT 43566.23 59160.80 MT 73951.00 625294.95 92.90 Cum 9531.54 984.40 Cum 12624.93 4349.90 Cum 55787.47 4700.00 Cum 162761.00 240704.94 35400.00 km 504096.00 Rate Unit of measur ement Amount 44574.00 km 634733.76 54677.00 km 778600.48 64129.00 km 913196.96 73583.00 km 1047821.92 3878449.12 61275796.49 57397347.37 Sd/-22.2.2014 Engineer - In - Chief P.R, PMGSY, Hyderabad