1) A gas undergoes an adiabatic expansion followed by a constant pressure heating process. The total work, heat transfer, and change in entropy are to be calculated. P-V and T-S diagrams are to be drawn.
2) The power output of a turbine operating with steam at given inlet and outlet conditions is to be calculated based on the mass flow rate and heat lost to surroundings.
3) For a gas undergoing a quasi-static expansion according to a given P-V relationship, the net heat transfer and maximum internal energy attained are to be calculated based on given initial and final pressures and volumes and a specific internal energy relationship.
1) A gas undergoes an adiabatic expansion followed by a constant pressure heating process. The total work, heat transfer, and change in entropy are to be calculated. P-V and T-S diagrams are to be drawn.
2) The power output of a turbine operating with steam at given inlet and outlet conditions is to be calculated based on the mass flow rate and heat lost to surroundings.
3) For a gas undergoing a quasi-static expansion according to a given P-V relationship, the net heat transfer and maximum internal energy attained are to be calculated based on given initial and final pressures and volumes and a specific internal energy relationship.
1) A gas undergoes an adiabatic expansion followed by a constant pressure heating process. The total work, heat transfer, and change in entropy are to be calculated. P-V and T-S diagrams are to be drawn.
2) The power output of a turbine operating with steam at given inlet and outlet conditions is to be calculated based on the mass flow rate and heat lost to surroundings.
3) For a gas undergoing a quasi-static expansion according to a given P-V relationship, the net heat transfer and maximum internal energy attained are to be calculated based on given initial and final pressures and volumes and a specific internal energy relationship.
1) A system contains 0.15 m of air at 4 bar and 150 C.
A reversible adiabatic expansion takes place till the
pressure falls to 1.01 bar. The gas is then heated at constant pressure till the enthalpy increases by 62 KJ. Calculate the total work and heat transfer and change in entropy. Draw the process on P-v and T-s diagrams. 2) A turbine operates under steady flow condition receiving steam at the following state: pressure=1.2MPa temp=188C, enthalpy= 2785KJ/Kg, velocity= 3.3 m/s and elevation=3m. the stem leaves the turbine at the following state: pressure=20 KPa, enthalpy= 2512KJ/Kg, velocity= 100 m/s and elevation=0 m. heat is lost to the surroundings at the rate of 0.29KJ/s. if the rate of steam flow through the turbine is 0.42 Kg/s, what is the power output of the turbine in KW? (or) 3) A gas of mass 1.5 kg undergoes a quasi-static expansion which follows a relationship P=a+bV, where a and b are constants. The initial and final pressures are 100kpa and 200kpa respectively and the corresponding volumes are 0.2m and 1.2 m. The specific internal energy of the gas is given by the relation u=1.5pV 85 kJ/kg. Where p is an Kpa and V is in m. Calculate the net heat transfer and the maximum internal energy of the gas attained during expansion.
4) A reversible heat engine operating between reservoirs at 900K and 300K drives a reversible refrigerator operating between reservoirs at 300K and 250K. the heat engine receives 1800KJ heat from 900K reservoir. The net output from the combined engine refrigerator is 360KJ. Find the heat transferred to the refrigerator and the net heat rejected to the reservoir at 300K.
5. Explain and derive carnot cycle and its efficiency.
6 0.1 m 3 of an ideal gas at 300 K and 1 bar is compressed adiabatically to 8 bar. It is then cooled atconstant volume and further expanded isothermally so as to reach the condition from where itstarted. Calculate: (i) Pressure at the end of constant volume cooling. (ii) Change in internal energy during constant volume process. (iii) Net work done and heat transferred during the cycle. Assume cp = 14.3 kJ/kg K and cv = 10.2 kJ/kg K.
7) A stone of 20 kg mass and a tank containing 200 kg water comprise a system. The stone is 15 m above the water level initially. The stone and water are at the same temperature initially. If thestone falls into water, then determine U, PE, KE, Q and W, when (i) The stone is about to enter the water,(ii) The stone has come to rest in the tank, and (iii) The heat is transferred to the surroundings in such an amount that the stone and water come to their initial temperature.
8) A fluid system undergoes a non-flow frictionless process following the pressure-volume relationAs where p is in bar and V is in m3. During the process the volume changes from0.15 m3 to 0.05 m3 and the system rejects 45 kJ of heat. Determine: (i) Change in internal energy; (ii) Change in enthalpy.
1. Define the term Quasi static process. 2. Define thermodynamic system 3. Define point function. 4. What is boundary?. 5. Define Clausius statement. 6. State Carnot theorem. 7. Explain entropy? 8. Write the term of open and closed systems. 9. State Zeroth law of thermodynamics. 10. Define thermodynamic equilibrium. 11. Explain homogeneous and heterogeneous system. 12. What are the assumptions made on heat engine? 13. Explain the term source and sink. 14. What is reversed Carnot heat engine? What are the limitations of Carnot cycle?