The Evolution E-Plus Tubing Rotator was developed as part of a system primarily designed to extend the life of production tubing in beam pumping and PC pumping wells.
See more at: http://eotools.com/index.php/component/virtuemart/17/9/artificial-lift/rotators/e-plus-tubing-rotator-detail#sthash.hw40Pjxo.dpuf
The Evolution E-Plus Tubing Rotator was developed as part of a system primarily designed to extend the life of production tubing in beam pumping and PC pumping wells.
See more at: http://eotools.com/index.php/component/virtuemart/17/9/artificial-lift/rotators/e-plus-tubing-rotator-detail#sthash.hw40Pjxo.dpuf
The Evolution E-Plus Tubing Rotator was developed as part of a system primarily designed to extend the life of production tubing in beam pumping and PC pumping wells.
See more at: http://eotools.com/index.php/component/virtuemart/17/9/artificial-lift/rotators/e-plus-tubing-rotator-detail#sthash.hw40Pjxo.dpuf
E-Plus Tubing Rotator Extend the life of production tubing
Applications Beam pumping operations PC pumping wells Features Very low maintenance required Simple installation and removal Can be adapted to range of API wellheads Adds only 4.5" (114.3 mm) to well- head height No wellhead modifications required No custom built tubing hangers are required Built-in shear mechanism prevents over- torquing of the tubing string Benefits Utilizes existing wellhead components Works in temperatures up to 399F (204C) Abnormal pump wear reduced Sand build-up in pump barrel eliminated Enhances corrosion inhibitors Prolongs tubing life 6-10 times Allows maintenance of well control while stripping B.O.P.s Paraffin build-up eliminated in most cases Rod hang-up eliminated in most cases
Description The Evolution E-Plus Tubing Rotator was developed as part of a system primarily designed to extend the life of production tubing in beam pumping and PC pumping wells.
Using a Tubing Rotator can extend the life of down-hole tubing by up to ten times in certain circumstances; by equalizing the tubing wear around the entire ID of the tubing instead of wearing through in a single spot. Operation The Evolution Oil Tools E-Plus Tubing Rotators are available with three (3) drive options: Manual Drive The Manual Drive System allows the operator to rotate the tubing string on a periodic basis (typically daily or weekly). This system is typically used with progressive cavity pumps. Mechanical Drive The Mechanical Drive System is used with pump jacks. This system can be set up to allow for approximately one revolution of the tubing in a 24 hour period. Electric Drive The Electrical Drive System is used with progressive cavity pumps that have an electrical surface drive. The drive system is run by an explosion-proof 220V motor. This system rotates the tubing string approximately two times during a 24 hour period.
E-Plus Tubing Rotator
www.eotools.com Specifications Well Diameter (in/mm) Casing Weight Description Part Number 7 1/16 (179.3) 2000# E-Plus Rotator Bolt Thru 7 1/16 - 2000# 104076 3000# Studded E-Plus Rotator H.D. 7 1/16 x 3000# 200 C 104214 Bolt thru E-Plus Rotator H.D. 7 1/16 - 3000# 104088 9 (228.6) 2000# E-Plus Rotator Studded 9 x 2000# 104547 E-Plus Rotator Bolt Thru 9 x 2000# 104550 3000# E-Plus Rotator Studded 9 x 3000# 104551 E-Plus Rotator Bolt Thru 9 x 3000# 104552 *Other sizes available on request
This document is uncontrolled when printed. 2014 Evolution Oil Tools Inc. All rights reserved. www.eotools.com Toll Free: 1-800-265-TOOL 266-10-TDS_Rev_A (E-Plus Tubing Rotator) May 2014 Artificial Lift
CANADA #3, 1820 30 th Ave NE Calgary, Alberta T2E 7M5 Toll Free: 1-800-265-TOOL (8665) Main: 403-243-1442 Fax: 403-258-2614
6415A - 63 St. Close Lloydminster, Alberta T9V 3B5 Tel: 780-522-8294 Fax: 780-875-6337