You are on page 1of 12

Circular Motion

Angular Velocity
>Definition of angular displacement, q
q = r = radius, s = linear displacement/perimeter
Unit: radian
> Definition for angular velocity
The rate of change of angular displacement for a circular motion.

Unit: Radians per second
> Definition of period, T
The time taken for the particle to complete a circle of the circular motion. For a
complete cycle, where q = 2p radians

Other information
360 2p
Example 1
What angle in degree has a car travelled around a circular track if the track has
a radius of 100 m and distance by the car is 300 m?
Angular displacement,

Example 2
For a point on the circumference (radius = 10 cm) which move through (from
beginning to the end) the circle in 60 s. calculate:
(a) angular velocity of the circumference.
(b) linear speed in m/s.
Centripetal Acceleration
> Definition
Centripetal acceleration is the acceleration where the direction of the velocity
change Dv is, perpendicular to the direction of v and is directed towards the
centre of the circle.
> Formula
Centripetal Acceleration, a = vw
= rw
2

=
because of Centripetal Acceleration, there will be centripetal force F
centripetal
=
ma = m = mw
2
r
Example 3
A 900 g object is whirled in a circle at the end of a string. If the string is 0.3 m
long and the force in the string is 6.4 N, what is the speed of the object?
The force acting on an object in circular motion is:
so

Example 4

A rope is wound automatically by a machine at a constant angular velocity. The
radius of the roller increases at a steady rate.
Sketch a graph to show:
(a) The variation of speed v of rope with radius, r.
(b) Centripetal force F on the rope at difference distance r from the centre
rotation.
Example 5
What is the maximum speed that a car can cross a humpbacked bridge and
just remain in contact with it? The radius of the bridge is 20 m.
Push of bridge on car wheels = P
Weight of car = W
The resultant force F = W P
This resultant force is the centripetal force.
Centripetal Force
> Definition
The force on a body moving in a circle and always directed towards the centre
O of the circle.
Formula F= ma
F = = mv w = mrw
2

Horizontal circle

Tension, T =
v = speed of the particle
r = radius of the circle
Other information

When the speed increases gradually, the tension in the string increases
until the braking tension is attained.

Then the object continues the motion in straight line with uniform speed at
the direction tangential to the circle. (First Newtons Law)
Vertical Circle

Tension, T = + mg cos q
Tension maximum Tension minimum
When q = 0,
T is maximum
Tension, T = + mg
When q = p
T is minimum
Tension, T = -mg
To maintain the movement at vertical circle:.
T 0
mg
v -The minimum velocity of the object at the highest point.
Other information

The object remains without dropping because the centripetal force on the
object is greater than the weight of the object.
W
Example 6
Plane flying in a uniform horizontal circle at constant speed and height,
(A) has no resultant force acting on it.
(B) experiences a resultant force acting away from the centre of the circle.
(C) experiences a resultant force acting towards the centre of the circle.
(D) experiences an increasing force acting towards the centre of the circle.
Objects moving with uniform circular motion experience a resultant force acting
towards the centre of the circle. It is called the centripetal force.
Example 7
An object is whirled in uniform circular motion in a vertical circle. If the weight of
the object is W the tension in the string is T. what is the centripetal Force. F, at
the moment that the object passes through the bottom point of the circle.
Value of the centripetal force must remain constant at all points in the circle if
the motion of the object is uniform circular motion.
At the bottom of the circle the weight of the object is acting down and the
tension in the string I acting up. The resultant of these two forces must be the
centripetal force. Add the two forces (which are vectors, of course) and you get:
F
c
= T-W
This means that the tension in the string has to be large enough to overcome
the weight of the object and also provide the centripetal force.
Note that at the top of the circle both the tension and the weight act down.
Because the two forces act in the same direction, the tension must be smaller
than it is at the bottom if the resultant they produce (the centripetal force) is to
be the same.
Example 8
Which of the following statements is correct for an object moving with uniform
horizontal circular motion?
(A) The speed of the object varies but the velocity is constant.
(B) The kinetic energy of the object varies but its momentum is constant. 1
(C) The momentum of the object varies but its speed is constant. 1
(D) The linear velocity of the object varies but its momentum is constant. I
The only answer to satisfy these conditions is C.
It an object is travelling in a circle, its direction is always changing, so no vector
quantities can remain constant e.g. velocity or momentum. Scalar quantities
can remain constant, however e.g. 1 speed and kinetic energy.
Note that although the value of acceleration remains the same and it is always
towards the centre of the circle, the direction of the acceleration is always
changing.
Example 9
An object of mass 2 kg is attached to the end of a string length 1 m and whirled
in a vertical circle at a linear speed of 4 ms
-1
. Find the tension in the string at
the top and the bottom of the circle.
Example 10
A pilot of mass 60 kg flies in a vertical circle of radius 1 km at a speed of 150
m/s. What is the push of the seat on the pilot at the top of his flight?
Conical Pendulum



Horizontal component Vertical component
T sin q =
= mrw
2

= m(l) sin q w
2

= mlw
2

T cos q = mg
ml w
2
cos q = mg

q = cos
-1

This method can be used to calculate the value of g but is not suitable
because:
(i) It is difficult to measure accurately the angle q.
(ii) It is hard to fix q at a constant value when measuring the period T.


Motion of a motorcyclist round a curved track

F =
The force F produces a moment in the clockwise direction. So, to prevent from
toppling over, the person has to bend inwards so that the weight mg and the
reaction R form a couple to balance the moment produced by F.



a = distance

Clockwise moment = anticlockwise moment
F x h = mga
x F = mga
=

The angle of q increases if:
(a) The speed v increases. (b) The radius, r of the track is small.

The centripetal force is provided by the lateral frictional forces F
1
and
F
2
between the inner and outer pair of tyres.
F
1
+ F
2
=
There is no acceleration in vertical direction, the normal reactions at the inner
and the outer pairs of tyres
R
1
+R
2
= mg
The clockwise moments = Total anticlockwise moments
(F
1
+ F
2
)h + R
1
a = R
2
a
R
2
-R
1
=
Solving the equation simultaneously

R
1
=
R
2
=
For the normal reaction R
1
at the inner pair of tyres is less than R
2
the normal
reaction at the outer pair of tyres.

The car over turn when
R
1
= = 0



v is the maximum speed of the car to round the curved track without
overturning. The speed can be increased when:
(a) The radius r of the circular track is bigger.
(b) The centre of gravity G of the car is lower, h is smaller.
(c) The wheel base is bigger.

Example 11
A bicycle and rider of total mass 120kg are rounding a bend of radius 20m. The
maximum sideways frictional force available is 600N. Find the greatest linear
speed of the bike before it will skid out of the bend.

Solution
F =ma
Gives : 600N = 120 x
V = 10 ms
-1


Example 12
Pendulum moves in a horizontal circle at an
angle of 60 to the horizontal as shown. Calculate the speed at which it must
move to maintain this angle.

Solution
T-tension in the rope W the weight of the mass

Resolve the tension vertically and horizontally
T sin 60
T cos 60


(i ) Since the pendulum is not moving up or down the vertical forces must be
equal.
T cos 60 = mg 1

(ii)The centripetal force is given by the force acting towards the centre of the
circle. 2
T sin 60 = . 2
Its all rather neat divide 2 by..1







v=2.94 ms -1
Hence speed of the pendulum is 2.9 ms
-1
.

Example 13
An aircraft is flying at a constant speed of 100ms
-1
in a horizontal circle of
radius 25 km. A plumb line, attached to the roof of the cabin is inclined at an
angle q to the vertical while the aircraft is turning.
(a) What is the centripetal acceleration of the aircraft?
(b) Calculate the angle q.

You might also like