(PLC) Programming for Special Purpose Machines(SPM)
Summer Training Project Synopsis
Bachelor of Technology Computer Science
SUBMITTED BY
MOHIT MITTAL 107 CSE-B SARTHAK JAIN 103 CSE B
Bhagwan Parshuram Institute of Technology
2
INTRODUCTION
SPM is an acronym for special purpose machines(spm), A machine specially designed for a particular use or function. Under, this project a special purpose machine was designed which is used to fix four bushes into an automobile brake disc. A numeric cylinder pushes the bushes into disc cavity for a particular time interval. This whole process, movement of pneumatic cylinder up and down,pressing the bushes into cavity for a particular time interval with a particular force i.e control of whole machine was done by PLC board.
PLC an acronym for programmable logic controller (PLC) is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory. A PLC is an example of a hard real time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result.
The application is free for the users and will consume very less space in memory. The application is user friendly and error free. Troubleshooting is very regularly required these days but it is not a childs play. Troubleshooting requires people from technical field with good knowledge about their system. But it is not possible to show your system to such a person, every time you encounter a problem. So with the help of this application one can easily troubleshoot his/her system by interacting with another person just by sharing his/her IP Address.