1) The document provides calculations to determine the required casing slips setting load for different casing depths and temperatures in the annulus.
2) It also includes calculations to determine the required pull force for making up a tubing hanger at a given depth and expansion.
3) The final section calculates the expected maximum wellhead pressure at various depths based on gas properties, temperature gradients, and bottomhole conditions.
1) The document provides calculations to determine the required casing slips setting load for different casing depths and temperatures in the annulus.
2) It also includes calculations to determine the required pull force for making up a tubing hanger at a given depth and expansion.
3) The final section calculates the expected maximum wellhead pressure at various depths based on gas properties, temperature gradients, and bottomhole conditions.
1) The document provides calculations to determine the required casing slips setting load for different casing depths and temperatures in the annulus.
2) It also includes calculations to determine the required pull force for making up a tubing hanger at a given depth and expansion.
3) The final section calculates the expected maximum wellhead pressure at various depths based on gas properties, temperature gradients, and bottomhole conditions.
Casing nominal weight (G cas ): 68.6 kg/m Wellhead prodacion temperature (t o1 ): 60 C Wellhead temperature during the job (t o2 ): 25 C Drilled depth (L 1 ): 2069 m Expected TOC in annulus (L 2 ): 500 m Bottomhole Temperature (t 1 ): 94 C Casing body yield strength : 664 t F= L 2 *G cas +33*DT*G cas DT= t a -t b T= t o + (t 1 -t o )L 2 /2L 1 TOC Free casing Free casing Free casing Casing slips in annulus static avarage prodactional avarage avarage temp. required setting (L 2 ) temperature (t a ) temperature (t b ) difference (DT) load (F) 500 m 33.3 C 64.1 C 30.8 C 104 t 550 m 34.1 C 64.5 C 30.3 C 106 t 600 m 35.0 C 64.9 C 29.9 C 109 t 650 m 35.8 C 65.3 C 29.5 C 111 t 700 m 36.6 C 65.7 C 29.1 C 114 t 750 m 37.5 C 66.1 C 28.7 C 116 t 800 m 38.3 C 66.5 C 28.2 C 119 t 850 m 39.1 C 66.9 C 27.8 C 121 t 900 m 40.0 C 67.3 C 27.4 C 124 t 950 m 40.8 C 67.8 C 27.0 C 126 t 1000 m 41.6 C 68.2 C 26.5 C 129 t The casing slips setting load can NOT be more than 50%-a of the casing body yield strength !! Stucked string free point calculation Write only in to the coluor cells! Pipe nominal weight (P pipe ): 46.7 kg/m Strech (L 1 ): 420 mm Differencitial load (T 2- T 1 ): 20 t L= 2,675*P cs* L 1 / (T 2 -T 1 ) Depth of stuck: 2623 m Required pull for making up Tubing hanger Write only in to the coluor cells! Pipe nominal weight (P pipe ): 6.7 kg/m Packer depth (H p ): 1400 m Expansion (L 1 ): 1000 mm L 1 = H p *F 1 /(2,675*G cs ) Required pull on pipe (F 1 ): 12.8 tonna Expected Maximum Wellhead Pressure 0.076*G*L G - rel. gas density P bh =P s *e f T bh +T s +547 L - Depth (m) T bh - Bottomhole temperature e= T s - Surface temperature P bh - Bottomhole pressure P form 5638 psi 388.83 bar P s - Surface Pressure TVD form 3386 m Required MW 1.17058 kg/l TVD (m) MW (ppg) Mw (kg/l) P bh (bar) T surf (C) T grad. (c/100m) T btm (C) CH4 rel. density f e f P max.surface (bar) P max.surface (psi) 1200 9.2 1.10 129.7 30 3 66 0.5544 0.078633 1.081808 119.9 1713.4 1300 9.2 1.10 140.6 30 3 69 0.5544 0.084791 1.088489 129.1 1844.7 1400 9.2 1.10 151.4 30 3 72 0.5544 0.090891 1.095149 138.2 1974.6 1500 9.2 1.10 162.2 30 3 75 0.5544 0.096935 1.101789 147.2 2102.9 3386 9.8 1.17 388.8 19 3 120.58 0.5544 0.207794 1.230959 315.9 4512.5 2.718281828 f= P max.surface (psi) Write only in to the coluor cells! Pipe nominal weight (P pipe ): 33.57 kg)m Packer depth (H p ): 1900 m Density (Q 1 ): 1.08 kg)l Buoyancy: 0.8624 DP weight: 55,008 metric tonne 121,269 Klbs Cuttings weighted fluid density Write only in to the coluor cells! Drilled Hole size: 16 " Hole cap.; 129.7 l/m ROP: 2 m/hr Drilled cuttings: 4.3 l/min Cuttings density: 2.8 kg/l Drilled cuttings: 12.1 kg/min Flow rate: 3200 l/min Mud density: 1.16 kg/l Depth: 1140.00 m/hr Cuttings weighted fluid density: 1.162 Kg/l Pressure 130.0 Bar 1884.6 psi Density of different cuttings Sand: 2.6 kg/l Gypsum 2.35 kg/l Granite: 2.4 - 3.0 kg/l Hard Limestone: 2.6 kg/l Rock Salt: 2.16 kg/l