You are on page 1of 58

Soil

Data Acquisition
Triaxial
Permeability
Shear
Consolidation
Unconfined Compression
Compaction
CBR
Density
Moisture
Grain Size Analysis
Liquid Limit
Plastic and Shrinkage Limit
Classification
Sampling
Water Level

2
9
17
24
26
30
31
34
38
43
44
47
49
50
53
58

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N
ELE DataSystem

ELE DataSystem series Transducers a complete range of transducers linking


popular geotechnical soils testing devices to the ADU.

System comprises Software,ADU Datalogger, and Transducers.


Options available for Triaxial, Consolidation, Direct/Residual
Shear and CBR tests.
Automates data logging, analysis, and reporting to ASTM/
AASHTO and British Standards.
Accurate and repeatable test procedures .
Multi-tasking; perform several tests concurrently.
Easily expandable.
Import and Export of sample data in AGS format.
ELE DataSystem is a unique system designed to interface with laboratory testing
equipment, thereby freeing the technician to perform other activities. It provides
the geotechnical engineer with fully automated data collection and analysis capabilities for the laboratory.
The system has been tailored to suit the requirements of a wide range of customers including commercial testing labs, educational and governmental authorities. Contractors and consultants will quickly realize the productivity benefits of
ELE DataSystem, while students in educational institutions will have the added
benefit of direct involvement in the use of computer technology related to conventional materials testing methods.
Through ELE DataSystem and your computer, you will achieve not only professional testing procedures in accordance with industry standards but also costeffective benefits in productivity and reduced operator fatigue. Eliminate the need
for overtime, night shifts and weekend shifts for data logging purposes; automated
logging enables greater utilization of working hours, considerable time saving in
the recording and calculation of test results, and automatic printing and plotting of
test results for direct entry into a report.
ELE DataSystem equipment can be divided into three main groups including:
ELE DataSystem Software specially written software packages designed to
record, analyze, and report test data guiding the user through testing procedures
in accordance with ASTM/AASHTO or British Standards.

ELE Autonomous Data Acquisition Unit (ADU) a sophisticated data acquisition unit with on-board intelligence and memory capability.

ELE DataSystem can be tailored to work on a wide variety of laboratory testing


devices, including equipment not manufactured by us. Our highly trained technical
service group is always available to help develop a system which best meets your
requirements.

DataSystem 7 Geotechnical Software


Windows compatible software packages .
Automatic Report Generation in accordance with ASTM
/AASHTO and British standards (MS Word required).
Real-time graphical outputs both to screen and printer as
required.
Tests can be performed using SI, imperial or metric units.
Test stages have built-in functions to aid on-the-fly calculation
of set-up parameters where appropriate.

DataSystem 7 Geotechnical software is a powerful data analysis and reporting


software suite designed to work in concert with ELEs ADU datalogger and
Transducers. The software incoporates advanced features such as intelligent data
analysis, automatic report generation (MS Word required), and AGS data exchange
compability.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N
DataSystem Upgrade Sets

DataSystem Consolidation Upgrade Set


ASTM D-2435; AASHTO T-216.

DataSystem Upgrade Sets quickly add DataSystems productivity benefits to existing ELE soil testing equipment.
Systems can be tailored to work on a variety of soils laboratory testing devices,
including equipment not manufactured by us. Our highly trained technical service
group is always available to help develop a system which best meets your requirements.
Note: Computer hardware and peripherals required for operation; not included.
Contact factory for system requirements.

Ordering Information
Set Includes: 1
1
1
EI1115/02.
EI1115/01.

ADU 8-Channel Data Acquisition Unit (27-1495/0x).


Consolidation Displacement Transducer (27-1649).
One Dimensional Consolidation Program (27-1770).

110vAC, 50/60Hz, 1.
220vAC, 50/60Hz, 1.

Accessories

Special Note:
See the relevant section of the catalog for complete sets of Triaxial, Shear,
Consolidation and CBR testing equipment.

Note:

DataSystem Triaxial Upgrade Set

DataSystem CBR Upgrade Set

ASTM D-2850; D-4767; AASHTO T-296, T-297.

ASTM D-1883; AASHTO T-193.

Ordering Information

Ordering Information

Set Includes: 1
ADU 8-Channel Data Acquisition Unit. (27-1495/0x).
1
CU/CD Triaxial Test Program. (27-1760).
1
Undrained Triaxial Shear Strength program. (27-1750).
1
S-Type Load Cell, 2,000 lb. (8.9 kN) cap. (27-1583).
1
Axial Strain Transducer (27-1617).
3
Pressure Transducer Assembly 1000Kpa (27-1625).
1
Volume Change Transducer (27-1641).
EI1105/02.
110vAC, 50/60Hz, 1.
EI1105/01.
220vAC, 50/60Hz, 1.

Set Includes: 1
ADU 8 Channel Data Acquisition Unit (27-1495/0x).
1
CBR Penetration Program. (27-1795).
1
S-Type Load Cell, 10,000 lb. (44.4 kN) cap. (27-1587).
1
CBR Displacement Transducer (27-1706).
EI1120/02.
110vAC, 50/60Hz, 1.
EI1120/01.
220vAC, 50/60Hz, 1.

Accessories

EI27-1587.
EI27-1706.

Note:

Items below required for each additional Triaxial Cell.

EI27-1502.
EI27-1625.
EI27-1641.

Items below required for each additional Consolidation Apparatus.

EI27-1649.

Consolidation Displacement Transducer.

Accessories
Note:

Items below required for each additional CBR testing machine.


10,000 lb. (44.4 kN) capacity S-Type Load Cell.
CBR Displacement Transducer.

8-Channel Expansion Module for ADU.


Pressure Transducer (Qty 3).
Volume Change Transducer.

DataSystem Direct/Residual Shear Upgrade Set


ASTM D-3080; AASHTO T-236.
Ordering Information
Set Includes: 1
1

EI1110/02.
EI1110/01.

ADU 8 Channel Data Acquisition Unit (27-1495/0x)


Direct/Residual Shear Strength Program
(27-1790).
1
S-Type Load Cell, 2,000 lb. (8.9 kN) cap (27-1583).
1
Vertical Displacement Transducer (27-1689).
1
Horizontal Displacement Transducer (27-1697).
110vAC, 50/60Hz, 1.
220vAC, 50/60Hz, 1.

Accessories
Note:

Items below required for each additional Direct/Residual Shear Apparatus.

EI27-1583.
EI27-1689.
EI27-1697.

2,000 lb. (8.9 kN) capacity S-Type Load Cell.


Vertical Displacement Transducer.
Horizontal Displacement Transducer.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N

ELE DataSystem Software


Windows compatible programs available for Triaxial,
Consolidation, Direct/Residual Shear and CBR tests.
Tests are run with step-by-step instructions selectable between
ASTM/AASHTO and British standards.
Automatic Report Generation in accordance with ASTM
/AASHTO and British standards (MS Word required)
Real-time graphical outputs both to screen and printer as
required during test
Tests can be performed using SI, imperial or metric units.
Test stages have built-in functions to aid on-the-fly calculation
of set-up parameters where appropriate.
Minimum data entry machine and transducer data held on
system disk.
Comprehensive Help screens
Facility to enlarge on-screen transducer readings during test
monitoring
AGS (Association of Geotechnical and Geoenvironmental
Specialists) file compatiblity for electronic exchange of data

Test Monitoring Screen showing CU/CD Triaxial test in progress.

With the growing demand for automated testing ELE offer DataSystem 7, a completely new suite of geotechnical data acquisition, analysis, and reportingsoftware
replacing the very successful and widely used DS6 range of programs.
DataSystem 7 is designed to record, analyze and report test data per ASTM,
AASHTO, and British Standards for Quick-Undrained Triaxial, CU/CD Triaxial,
Consolidation, Direct/Residual Shear and CBR tests.
The software runs on a personal computer connected to the ELE ADU data logger with transducers and has been designed and written for use by engineers and
technicians.
Each package is user-friendly and guides the user through the test procedure in
accordance with the selected Standard (ASTM/AASHTO or BS). Standard screen
layouts present sample details, test stage, menu options and data entry.

Test Analysis Screen, Consolidation Square Root Plot.

The engineer has total control over those areas of analysis where an engineering
judgement is required.The test techniques and methods follow generally accepted
geotechnical engineering practice.

DS7 has significant advantages over DS6. These include:

All test data and reports are automatically filed in a logical folder structure based
on Job Number,Test Type & Sample Number. Files for each test are given a unique
name, based on sample i.d., date and time. This system allows easy identification of
historical test data and ensures that test data will never be accidentally over-written.
To take full advantage of the extensive reporting facility the package provides,
Microsoft Word (Version 97 or later) should be resident on the system.This facility
will allow reports to be generated automatically.
The packages of software required are accessed by an activation code, supplied by
ELE, allowing the customer to build up a suite of software on an as required basis.
Each program is complete in its own right and can be integrated into the system
at any time.
Please refer to the following page for a detailed listing of the packages available.

DS7 Benefits over DS6


Up-to-date Windows User Interface. Compatible with all
variants of Windows operating systems from Windows
95 onwards.
Conformance to ASTM,AASHTO & BS standards (user
selectable).
Intelligent analysis and automatic report generation using
MS Word.
Easier monitoring of tests, with all relevant information on a
well-laid out screen.
Useful built-in calculators (eg for determining rates of strain,
weights for cosolidation etc)
Three international engineering units systems
5-slope transducer calibration facility for higher accuracy
(or simple entry of single slope from certificate if preferred).
AGS (Association of Geotechnical and Geoenvironmental
Specialists) file compatiblity for electronic exchange of data.
Special Note:
IBM or compatible systems and the ADU are required for software operation.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N
DS7 Quick Undrained Triaxial Software

DS7 One-Dimensional Consolidation Software

Tests are run with step-by-step instructions selectable between


ASTM/AASHTO and British standards.
Automatic Report Generation in accordance with ASTM
/AASHTO and British standards (MS Word required).
Real-time graphical outputs both to screen and printer as
required during test.
Compatible with Windows operating systems from Windows 95
onwards.
Options for single or multi-stage testing on one sample.
Mohr circles produced for graphical analysis.

Tests are run with step-by-step instructions selectable between


ASTM/AASHTO and British standards.
Automatic Report Generation in accordance with ASTM
/AASHTO and British standards (MS Word required)
Real-time graphical outputs both to screen and printer as
required during test
Tests can be performed using SI, imperial or metric units.
Automatic compensation for frame deformation.

Options are available for a single test on one sample, standard three-sample procedure with linking of the results or for a multi-stage test on one sample. Load
and strain are monitored through transducers.

DataSystem Consolidation Software provides all basic functions needed to record


and analyze consolidation test data. Options are available for monitoring settlement on a log time or square-root time basis. Printouts and graphical plots are
available for all stages including Mv and Cv moisture content, voids ratio plots, and
initial sample conditions.

Various printouts and graphical plots are available including basic sample data,
moisture content, and density.The program tabulates shearing data and plots
stress against strain. Mohr circles are produced for graphical analysis.

Ordering Information

Ordering Information

DS7 Direct/Residual Shear Software

EI27-1750.

EI27-1770.

Tests are run with step-by-step instructions selectable between


and British standards.
DS7 CU/CD Effective Stress Triaxial Software ASTM/AASHTO
Automatic Report Generation in accordance with ASTM
Tests are run with step-by-step instructions selectable between
ASTM/AASHTO and British standards.
Automatic Report Generation in accordance with ASTM
/AASHTO and British standards (MS Word required).
Real-time graphical outputs both to screen and printer as
required during test.
Compatible with Windows operating systems from Windows 95
onwards.
Complete package for consolidated drained and consolidated
undrained triaxial tests.
This advanced package includes procedures for consolidated drained and consolidated undrained tests. Standard options are available for saturation, consolidation
and shearing with automatic monitoring of the various parameters through transducers linked to the system. Load, strain, volume-change, pore-pressure, cell pressure and back pressure can all be monitored.
Various prints and graphical plots are available to the engineer and include saturation data such as pore pressure build-up and B values, consolidation, volume
change against time, shearing load versus strain with pore pressure monitoring.

Ordering Information
EI27-1760.

/AASHTO and British standards (MS Word required).


Real-time graphical outputs both to screen and printer as
required during test.
Compatible with Windows operating systems from Windows 95
onwards.
Options for both quick undrained and drained shear tests.
Single or Multiple stages
Automatic compensation for frame deformation.
This unique package provides test options for quick undrained or drained shear
tests with the user selectable option of residual testing. Individual test results can
be linked together to produce the Coulomb Envelope. Printouts and plots are
available for sample description and basic test data such as moisture content, etc.
Real-time plots of settlement, shear versus displacement and vertical displacement
during shearing is readily available via the computer screen or printer.

Ordering Information
EI27-1790.

DS7 CBR Penetration Software


Two tests can be combined under the summary report for
top and base of sample test results.
Tests are run with step-by-step instructions selectable between
ASTM/AASHTO and British standards.
Automatic Report Generation in accordance with ASTM/
AASHTO and British standards (MS Word required).
Real-time graphical outputs both to screen and printer as
required during test.
Compatible with Windows operating systems from Windows 95
onwards.
This program provides the classical data for the CBR test. Load and penetration
are monitored simultaneously.The program tabulates the results and provides a
graphical presentation report.

Ordering Information
EI27-1795.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N

Autonomous Data Acquisition Unit


(ADU)

Up to 32 input/output channels.
Up to 100 readings per second in normal multi-tasking mode.
Standard RS-232C interface.
Compatible with a complete range of transducers for almost
any test requirements.

The ADU is a sophisticated data acquisition unit which provides the link between
your computer and the transducers connected to your test equipment.
With complete on-board intelligence and memory capabilities, the ADU takes
control of the data acquisition process.The user is not required to do any
programming. All test initiation functions and data transfer procedures are
handled by the microcomputer and ADU software.With all real time activities
controlled by the ADU, the microcomputer may be switched off or used for
other purposes while testing is in progress.

Specifications
Case.

Free standing; houses power supply, analog to digital


conversion module, 128k bytes of memory storage and an
8-channel analog input module with transducer energization.
Standard 5-pin DIN type.
5 volts to 10 mV full scale.
10vDC.
17-1/2" w. x 16" d. x 7" h. (445 x 406 x 178 mm).
Net 25 lbs. (11.3 kg).

Sockets.
Input Range.
Transducer Supply.
Dimensions.
Weight.

Ordering Information
EI27-1495/02. 110-120vAC, 50/60 Hz, 1.
EI27-1495/01. 220-240vAC, 50/60 Hz, 1.

Accessories
EI27-1502.

8-Channel Expansion Analog Input Module.

Housed in a free standing case, the ADU is supplied complete with an 8-channel
input module.The unit can easily be upgraded to a capacity of 32 channels
through the optional 8-Channel Expansion Modules.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N

S-Type Load Cells

Wide range of capacities to choose from.


Rugged, sealed construction.
Easily installs on load frames.
Supplied complete with calibration certificate and 5-pin
DIN type connector for connection to the ADU.

ELE S-Type Load Cells provide an economical means of obtaining accurate load
readings during unconfined compression, triaxial and CBR test applications.They
are supplied complete with all mounting hardware, 5-pin DIN type connector and
calibration certificate.

Specifications
Excitation.
Output.
Non-Linearity.
Hysteresis.
Bridge Resistance.
Overload Capacity.
Mounting Hardware.

10vDC.
3.0 mV/V minimum.
0.03% full scale output.
0.02% full scale output.
350 ohms nominal.
150%.
Includes all necessary hardware for mounting to the Tritest 50
and Versa-Loader load frames.

Ordering Information
EI27-1581.
EI27-1583.
EI27-1585.
EI27-1587.

500 lb. (2.2 kN) capacity. Net wt. 1 lb. (0.45 kg).
2,000 lb. (8.9 kN) capacity. Net wt. 1 lb. (0.45 kg).
5,000 lb. (22.2 kN) capacity. Net wt. 3 lbs. (1.3 kg).
10,000 lb. (44.4 kN) capacity. Net wt. 3 lbs. (1.3 kg).

Displacement Transducers

Ideally suited for use with ADU for accurate displacement


measurements.
Supplied standard with 5-pin DIN type connector.
Models available for use in consolidation, shear, CBR and
triaxial test applications.
Supplied complete with mounting hardware for specified
products.
Displacement Transducers are used in consolidation, shear, CBR, and triaxial test
applications for accurate displacement measurements.They are supplied complete
with a 5-pin DIN type connector for direct hook-up to the ADU.

Specifications
Construction.
Excitation.
Connector.
Mounting Bracket.
Weight.

Fully encapsulated electronics, sealed in a stainless steel case.


10vDC.
5-Pin DIN type.
Included as standard.
Net 1 lb. (0.45 kg).

Ordering Information
EI27-1649.
EI27-1689.
EI27-1697.
EI27-1617.
EI27-1706.

Consolidation Displacement Transducer. 0 to 0.4" (0 to 10 mm)


range. For use on EI25-0402 series Consolidation Apparatus.
Vertical Displacement Transducer. 0 to 0.3999" (0 to 9.999 mm)
range. For use on EI25-0700, EI25-0705 Rowe Cells and
Direct/Residual Shear Machines.
Horizontal Displacement Transducer. 0 to 0.3999"
(0 to 9.999 mm) range. For use on Direct/Residual Shear
Machines.
Axial Strain Transducer. 0 to 2.0" (0 to 50 mm) range. For use
on Triaxial Cells.
CBR Displacement Transducer. 0 to 2.0" (0 to 50 mm) range.
For use on Tritest, Multiplex and Versa-Loader Series Load
Frames.

Submersible Load Transducers


Submersible Load Transducers are used to accurately measure axial loads applied
to the triaxial test specimen. Mounted in place of the standard triaxial cell loading
pistons, these unique transducers measure loads directly on top of the specimen.
This configuration totally eliminates any effect of piston friction on load readings.
All transducers are supplied complete with a 5-pin DIN type connector and
calibration certificate.

Ordering Information
Note: Model EI27-1293 Distance Piece is required when using Submersible Load
Transducers installed on our triaxial cells.
EI27-1573.
1,100 lb. (5.0 kN) capacity.
EI27-1575.
2,250 lb. (10 kN) capacity.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
D ATA A C Q U I S I T I O N

Pressure Transducer
De-airing block aids in removal of entrapped air in system.
Supplied complete with calibration certificate.
The Pressure Transducers are used to measure the cell, pore and back pressures
during triaxial testing.The assembly is supplied complete with a de-airing block,
valve, 5-pin DIN plug connector and calibration certificate.

Specifications

Volume Change Transducer

250 psi (1,700 kPa) maximum working pressure.


Reversing valves to increase capacity.
Steel hinged case for wall mounting and access to piping.
Supplied complete with calibration certificate.

The Volume Change Transducer provides continuous measurements of volume


change during the triaxial test.The assembly includes valves to reverse the flow
through the unit, providing increased capacity.

Stainless Steel.
10vDC.
1/4 BSP.

Ordering Information
EI27-1625.

145 psi (1,000 kPa) capacity.

Transducer Extension Cable


High quality insulated cable.

Specifications
Maximum Pressure.
Excitation.
Output.
Capacity.
Case.
Connector.
Overall Dimensions.
Weight.

Construction.
Excitation.
Thread.

250 psi (1,700 kPa).


10vDC.
1.25 Volts full range.
80 cc x 0.1 cc sensitivity.
Steel; hinged for access to piping.
5-Pin DIN type.
9" w. x 7" d. x 14-1/2" h. (229 x 178 x 368 mm).
Net 10 lbs. (4.5 kg).

Wired with a 5-pin DIN type plug at one end and a 5-pin DIN type socket at the
other, these extension cables are used to increase the length of any ADU
transducer cable.

Ordering Information
EI27-1717.

10 ft. (3.05 m) long.

Ordering Information
EI27-1641.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
TRIAXIAL
Ordering Information
Note: Computer hardware and peripherals required for system operation;
not included. Contact factory for system requirements.
Set Includes: 1
1
3
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1

Tri-Flex 2/DataSystem Triaxial Test Set


ASTM D-2850, D-4767; AASHTO T-296, T-297.
The Tri-Flex 2/DataSystem Triaxial Test Set provides the geotechnical engineer with
a comprehensive line of products satisfying the latest in triaxial testing techniques.
The system, which is modular in design, can be tailored to suit the requirements of
a wide range of customers including commercial testing laboratories, educational
institutions and governmental agencies.
The set is made up of various components, with the major items being:
The 11,200 lb. (50 kN) capacity Digital Tritest 50 Load Frame featuring a
microprocessor-controlled stepper motor drive system providing fully variable
speeds from 0.399999" (9.99999 mm) per minute to as low as 0.000001"
(0.00001 mm) per minute. A large LCD screen with touch-sensitive keypad for
precise setting, control and viewing of all load frame functions.
A Triaxial Cell complete with accessories for drained and undrained testing of
2.8" or 70 mm diameter specimens to confining pressures of up to 145 psi
(1,000 kPa).
The ADU Data Acquisition Unit with 8 channels, for automated data
acquisition and recording of test parameters.
Complete set of Electronic Measurement Transducers for load, displacement,
pressure and volume change.
DataSystem Triaxial Software for recording, analysis and report generation in
English or Metric units.
The Tri-Flex 2 Master Control Panel and De-aired Water Tank System for
precise applications of confining, back and saturation pressures (Note: not
shown above, see pages 14 and 15 for complete specifications).

EI2020/02.
EI2020/01.
EI2021/02.
EI2021/01.

ADU 8-Channel Data Acquisition Unit (27-1495/0x).


Axial Strain Transducer (27-1617).
145 psi (1,000 kPa) Pressure Transducers (27-1625).
Volume Change Transducer (27-1641).
1,100 lb. (5 kN) Submersible Load Transducer (27-1573).
Quick Undrained Triaxial Software (27-1750).
CU/CD Effective Stress Triaxial Software (27-1760).
Tri-Flex 2 Master Control Panel (25-0696/0x or 25-0697/0x).
Tri-Flex 2 Water De-airing Tank System (25-0698).
Digital Tritest 50 Load Frame (25-3518/0x).
Triaxial Cell (25-4117).
2.8" or 70 mm Base Pedestals (25-4178 or 25-4176).
2.8" or 70 mm Specimen Caps (25-6630 or 25-6430).
2.8" or 70 mm Drainage Lines (25-6630/10 or 25-6430/10).
2.8" or 70 mm Porous Stones. Pack of 2 (25-6721 or 25-6561).
2.8" (70 mm) Sealing Rings. Pack of 10 (25-6641 or 25-6461).
2.8" (70 mm) Filter Paper Drains. Pack of 50 (25-6580).
2.8" (70 mm) Filter Paper Discs. Pack of 100 (25-6585).
2.8" (70 mm) Rubber Membranes. Pack of 10 (25-6441).
2.8" (70 mm) O-ring Placing Tool (25-6470).
2.8" (70 mm) Membrane Tester (25-6443).
2.8" (70 mm) Two-Part Split Mold (25-6690).
2.8" (70 mm) Suction Membrane Device (25-6660 or 25-6480).
2.8" (70 mm) Two-Way Split Former (25-6680 or 25-6500).

110vAC, 50/60Hz, 1. English.


220vAC, 50/60Hz, 1. English.
110vAC, 50/60Hz, 1. Metric.
220vAC, 50/60Hz, 1. Metric.

Tri-Flex 2 One-Cell Triaxial Test Set


ASTM D-2850, D-4767; AASHTO T-296, T-297.
The Tri-Flex 2 One-Cell Triaxial Test Set is designed for triaxial testing of 2.8" or 70
mm diameter specimens.

Ordering Information
Set Includes: 1
1
1
1
1
1
1
3
1
1
2
1
1
1
1
2
1
1
1
1
1
EI2000/02.
EI2000/01.
EI2001/02.
EI2001/01.

Tri-Flex 2 Master Control Panel (25-0696/0x or 25-0697/0x).


Tri-Flex 2 Water De-airing Tank System (25-0698).
Digital Tritest 50 Load Frame (25-3518/0x).
Proving Ring, 1,000 lb. (4.5 kN) (78-0260).
Strain Dial Indicator (25-4212 or 25-4210).
Digital Pressure Gauge (27-1620).
Triaxial Cell (25-4117).
No-Volume Change Valves (25-4520).
2.8" or 70 mm Base Pedestal (25-4178 or 25-4176).
2.8" or 70 mm Specimen Cap (25-6630 or 25-6430).
2.8" or 70 mm Drainage Lines (25-6630/10 or 25-6430/10).
2.8" or 70 mm Porous Stones. Pack of 2 (25-6721 or 25-6561).
2.8" (70 mm) Sealing Rings. Pack of 10 (25-6641 or 25-6461).
2.8" (70 mm) Filter Paper Drains. Pack of 50 (25-6580).
2.8" (70 mm) Filter Paper Discs. Pack of 100 (25-6585).
2.8" (70 mm) Rubber Membranes. Pack of 10 (25-6441).
2.8" (70 mm) O-ring Placing Tool (25-6470).
2.8" (70 mm) Membrane Tester (25-6443).
2.8" (70 mm) Two-Part Split Mold (25-6690).
2.8" (70 mm) Suction Membrane Device (25-6660 or 25-6480).
2.8" (70 mm) Two-Way Split Former (25-6680 or 25-6500).

110vAC, 50/60Hz, 1. English.


220vAC, 50/60Hz, 1. English.
110vAC, 50/60Hz, 1. Metric.
220vAC, 50/60Hz, 1. Metric.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
TRIAXIAL
Specifications
Capacity.
Speed Range.

11,200 lbf. (50 kN).


English mode: 0.000001 to 0.399999 in/min.
Metric mode: 0.00001 to 9.99999 mm/min.
2.0 in/min. (50 mm/min.).
3.9" (100 mm); limit switch protection.
35.8" (910 mm) maximum; 12" (305 mm) minimum.
14.3" (364 mm).
RS232C; programmable baud rate and protocol.
19.7" w. x 19.7" d. x 57.8" h. (500 x 500 x 1,470 mm).
Net 220 lbs. (100 kg); Shpg. 225 lbs. (102 kg).

Rapid Approach Speed.


Platen Travel.
Vertical Clearance.
Horizontal Clearance.
Serial Interface.
Overall Dimensions.
Weight.

Ordering Infomation
Note: Shown with triaxial cell, load and strain measurement accessories; not included,
order separately.
EI25-3518/02. 110-120vAC, 50/60 Hz, 1, 300 Watts.
EI25-3518/01. 220-240vAC, 50/60 Hz, 1, 300 Watts.

Accessories
EI25-4212.
EI25-4210.
EI78-0050.
EI78-0060.
EI78-0160.
EI78-0260.
EI78-0360.
EI78-0460.
EI78-0760.
EI78-0860.
EI27-1115/02.
EI27-1115/01.
EI27-1116/02.
EI27-1116/01.

Axial Strain Dial Indicator. 1.0" range x 0.001" divisions.


Axial Strain Dial Indicator. 25 mm range x 0.01 mm divisions.
Proving Ring. 225 lb. (1 kN) capacity.
Proving Ring. 450 lb. (2 kN) capacity.
Proving Ring. 650 lb. (3 kN) capacity.
Proving Ring. 1,000 lb. (4.5 kN) capacity.
Proving Ring. 1,500 lb. (7 kN) capacity.
Proving Ring. 2,250 lb. (10 kN) capacity.
Proving Ring. 6,000 lb. (28 kN) capacity.
Proving Ring. 11,200 lb. (50 kN) capacity.
2-Channel Digital Readout and Transducer Set, English.
110vAC, 50/60 Hz, 1.
2-Channel Digital Readout and Transducer Set, English.
220vAC, 50/60 Hz, 1.
2-Channel Digital Readout and Transducer Set, Metric.
110vAC, 50/60 Hz, 1.
2-Channel Digital Readout and Transducer Set, Metric.
220vAC, 50/60 Hz, 1.

Special Note:
See Data Acquisition section for electronic load and axial strain measurement options.

Digital Tritest 50 Load Frame


ASTM D-2850, D-4767; AASHTO T-296, T-297.
Microprocessor controlled.
11,200 lbf. (50 kN) maximum load capacity.
Fully variable loading speeds from 0.399999" (9.99999 mm)
per minute to as low as 0.000001" (0.00001 mm) per minute.
Large LCD screen display with touch-sensitive keypad.
Rapid approach and return of platen to set datum point
control.
The new Digital Tritest 50 provides the geotechnical testing laboratory with a
modern and versatile triaxial load frame to meet current and future laboratory
testing needs.
Benefiting from the latest in microprocessor technology, the Digital Tritest 50 is
capable of applying test loads up to 11,200 lbf. (50 kN) at any test speed within
the range of 0.399999" (9.99999 mm) per minute to as low as 0.000001"
(0.00001 mm) per minute.
The Digital Tritest 50s unique drive system performs with virtually no vibration
as the test loads are applied, regardless of the testing speed selected.
All load frame functions including speed selection, loading and unloading, rapid
approach and return, along with additional mode selections for setting datum
points or remote computer operation are easily accomplished by the loaders
new LCD display and keypad system.

10

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
TRIAXIAL
Specifications
Capacity.
Speed Range.
Platen Travel.
Vertical Clearance.
Horizontal Clearance.
Controls.

10,000 lbf. (45 kN).


0.001" to 0.08" (0.025 to 2.032 mm) per minute.
2.5" (64 mm); limit switch protection.
33" (838 mm) maximum.
10" (254 mm).
Push-button Up-Down-Stop with running and travel limit
indicator lights; Speed control knob.
13.5" w. x 23" d. x 51" h. (343 x 584 x 1,295 mm).
Net 185 lbs. (84 kg).

Overall Dimensions.
Weight.

Ordering Information
Note: Shown with triaxial cell, load and strain measurement accessories; not included,
order separately.
EI25-3525/02.
EI25-3525/01.

110-120vAC, 50/60 Hz, 1.


220-240vAC, 50/60 Hz, 1.

Accessories
EI27-1118/02.

EI27-1118/01.

EI27-1119/02.

EI27-1119/01.

Triaxial Test Digital Readout Set, English. 110vAC, 50/60 Hz,


1. Includes: lower platen, 2-channel digital readout, 2,000 lb.
capacity S-type load cell, axial strain transducer with 2" range
and mounting hardware.
Triaxial Test Digital Readout Set, English. 220vAC, 50/60 Hz,
1. Includes: lower platen, 2-channel digital readout, 2,000 lb.
capacity S-type load cell, axial strain transducer with 2" range
and mounting hardware.
Triaxial Test Digital Readout Set, Metric. 110vAC, 50/60 Hz, 1.
Includes: lower platen, 2-channel digital readout, 8.9 kN
capacity S-type load cell, axial strain transducer with 50 mm
range and mounting hardware.
Triaxial Test Digital Readout Set, Metric. 220vAC, 50/60 Hz, 1.
Includes: lower platen, 2-channel digital readout, 8.9 kN
capacityS-type load cell, axial strain transducer with 50 mm
range and mounting hardware.

Special Note:
See Unconfined Compression and CBR sections of catalog for the
respective test accessories used with the Versa-Loader.TM

Versa-LoaderTM
ASTM D-2850; AASHTO T-296.
10,000 lbf. (45 kN) maximum load capacity.
Accurate loading speeds from 0.08" (2.032 mm) to as low as
0.001" (0.025 mm) per minute.
Push-button Up-Down-Stop operation with overtravel limit
switch protection.
Highly versatile can be used for Quick Undrained Triaxial,
Unconfined Compression and CBR testing with proper
accessories.
The Versa-LoaderTM fills the need for any laboratory, school or other testing facility
that must have an accurate yet economical load frame capable of performing a
wide range of test procedures.
The basic loader consists of a control box, motor, load screw, vertical tie rods and
crosshead. Register symbols located on the hand adjustable locknuts assure that
the crosshead is parallel with the platen.The unit is designed for load applications
up to 10,000 lbf. (45 kN) at any speed within the range of 0.08" (2.032 mm) per
minute down to as low as 0.001" (0.025 mm) per minute.
With its wide range of accessories, the Versa-LoaderTM can be outfitted for Quick
Undrained Triaxial, Unconfined Compression, CBR and Soil Cement testing in
accordance with ASTM and AASHTO testing standards.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

11

Soil
TRIAXIAL

Triaxial Cell

Tri-Flex 2 Triaxial Cell

ASTM D-2850, D-4767; AASHTO T-296, T-297; BS-1377.

ASTM D-2850, D-4767, D-5084; AASHTO T-296, T-297.

Working pressures up to 250 psi (1,700 kPa).


All around visibility.
Double drainage.
Accepts Submersible Load Transducer.

ELE Triaxial Cells are designed to meet the requirements of the modern soils
laboratory.Three quick release tie rods are used to attach the cylinder and head
assembly to the base.The high quality finish between the piston and the head, the
use of an O-ring seal, and special lubricant reduce friction levels and eliminate
water leakage.
Each cell has five base ports; two for top drainage/backpressure, two for bottom
drainage/pore pressure, and one for confining pressure.Two no-volume change
valves and an anvil for strain indicator/transducers are supplied as standard.

Specifications
Max.Working Pressure.
Max. Piston Load.
Max. Specimen Size.
Required Clearance.
Weights.

250 psi (1,700 kPa).


10,100 lbf. (45 kN).
2.8" (70 mm) diam. x 5.6" (140 mm) l.
17" (430 mm) vertical; 7.1" (180 mm) horizontal.
Net 16 lbs. (7.3 kg).

Working pressures up to 150 psi (1,034 kPa).


Low friction piston assembly.
All around visibility.
Double drainage.
Accepts a wide range of platen sizes.

The Tri-Flex 2 Triaxial Cell incorporates many features that promote ease in
specimen preparation and installation.The cell consists of an aluminum alloy head
assembly with a piston assembly that features the use of linear bearings for
virtually, friction-free movement. A stainless steel base assembly with no-volume
change type valves at all specimen inflow and outflow ports provides additional
corrosion resistance and prevention of pressure changes during test procedures.
Through the use of the cells optional specimen caps and base pedestals,
specimens ranging in size from 1.4" (35 mm) to as large as 4" (102 mm) in
diameter can easily be tested.

Specifications
Max.Working Pressure.
Max. Piston Load.
Specimen Size.

Ordering Information

Head Assembly.

Note: Shown with base pedestals; not included, order separately.

Piston Assembly.
Base Assembly.

EI25-4117.

3" (70 mm) Triaxial Cell.

Accessories
EI25-4520.
EI25-8080.
EI25-4170.
EI25-4176.
EI25-4178.
EI25-4250.
EI25-6430.
EI25-6630.
EI25-4250/10.
EI25-6430/10.
EI25-6630/10.

No-Volume Change Valve.


Grease Gun. Includes one tube of Silicone Grease Lubricant.
1.4 (35 mm) Base Pedestal.
70 mm Base Pedestal.
2.8 Base Pedestal.
1.4 (35mm) Specimen Cap.
70 mm Specimen Cap.
2.8 Specimen Cap.
Drainage Line for 25-4250.
Drainage Line for 25-6430.
Drainage Line for 25-6630.

Dimensions.
Weight.

150 psi (1,034 kPa).


10,100 lbf. (45 kN).
1.4" (35 mm) to 4" (102 mm) diam. using optional cap and
base accessories, not included.
Anodized aluminum with quick-disconnect fill/vent port and dial
gauge support assembly.
Sealed, with linear bearings and piston locking clamp.
Stainless steel with four stainless steel no-volume change ball
valves at inflow and outflow ports and one brass ball valve at
the lateral port. All included tubing is of either stainless steel or
Teflon construction.
Approx. 8" diam. x 18" h. (203 x 458 mm) excluding valves.
Net 25 lbs. (11.3 kg).

Ordering Information
EI25-4159.

4" Triaxial Cell.

Accessories
EI25-4159/10. 1.4" Acrylic Specimen Cap and Base Pedestal Set.
EI25-4159/11. 2.8" Acrylic Specimen Cap and Base Pedestal Set.
EI25-4159/12. 4.0" Acrylic Specimen Cap and Base Pedestal Set.

12

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
TRIAXIAL

Triaxial Testing Accessories


Specimen Diameter
Porous Stones (Pack of 2)
Sealing Rings (Pack of 10)
Filter Paper Drains (Pack of 50)
Filter Paper Discs (Pack of 100)
Membrane Testers
Rubber Membranes (Pack of 10)
Length:
Thickness:
Two-Way Split Formers
Two-Part Split Mold
Suction Membrane Device
O-Ring Placing Tools
Hand Specimen Trimmer

1.4" (35 mm)


EI25-4461
EI25-4281
EI25-4880
-EI25-4263
EI25-4261
5.9" (150 mm)
0.012" (0.3 mm)
EI25-4320
EI25-4330
EI25-4300
EI25-4290
EI23-5802

70 mm
EI25-6561
EI25-6461
EI25-6580
EI25-6585
EI25-6443
EI25-6441
5.9" (150 mm)
0.016"(0.4 mm)
EI25-6500
EI25-6530
EI25-6480
EI25-6470
EI23-5802

2.8"
EI25-6721
EI25-6641
EI25-6580
EI25-6585
EI25-6443
EI25-6441
9.8" (250 mm)
0.016" (0.4 mm)
EI25-6680
EI25-6690
EI25-6660
EI25-6470
EI23-5802

100 mm
EI25-7661
EI25-7631
EI25-7670
-EI25-7623
EI25-7621
13" (330 mm)
0.02" (0.5 mm)
EI25-7650
EI25-7655
EI25-7640
EI25-7610
--

4.0"
EI25-7761
EI25-7631
EI25-7670
-EI25-7623
EI25-7621
13" (330 mm)
0.02" (0.5 mm)
EI25-7740
EI25-7765
EI25-7640
EI25-7610
--

Special Note:
All porous stones have a high permeability to water in the order of 2 x 10-8 m/s and a very low air-entry value.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

13

Soil
TRIAXIAL
Tri-Flex 2 Master Control Panel
Three independent channels of pressure control.
Digital pressure display system to an accuracy of 0.25%
of reading within range.
User-friendly burette system.
Easy removal of burette/annulus assembly for cleaning.
Bridging feature to set multiple burette pressures with
one regulator.
Quick disconnects for easy system setup.
Easily expands for multi-cell test.
Straightforward in design, the Tri-Flex 2 Master Control Panel meets the demands
for an accurate, yet simple-to-operate panel system for use in triaxial and
permeability testing.The panel is easy to operate, with a limited number of
controls and an easy-to-read digital pressure display system. Fast, easy connection
and removal of additional system components allow quick system setup.
The operator has complete control of system pressure and flow measurements
during specimen testing, with three independently-controlled pressure regulators
one for confining or cell pressure; one for lower or pore/head pressure; and
one for upper or back/tail pressure.The bridging feature lets the operator quickly
set the pressures of multiple burette systems with just one regulator.
Each burette/annulus assembly has a selector which opens or closes the access to
the annulus.When opened, up to 400 ml of water is available to the operator for
specimen saturation and other test stages without refilling the burette assembly.
By a simple flip of a switch to activate the digital pressure display system, any of
the regulated pressures can be displayed in digital form to an accuracy of 0.25%
of reading within range.
The Tri-Flex 2 Master Control Panel is designed in full compliance with ASTM and
AASHTO specifications for use in the application, monitoring and data recording
of test conditions.

Specifications
Measurement Range.
Master Regulator.
Master Pressure Gauge.
Master Vacuum Gauge.
Digital Pressure Meter.

Burette Pressure Regulators.


Burette/Annulus.
Utilities Required.
Dimensions.
Weight.

10-4 to 10-10 cm/sec.


2 to 150 psi (14-1,034 kPa), dual scale.
2 to 160 psi (14-1,103 kPa), dual scale.
0 to -30 inches of Hg (0-100 kPa), dual scale.
English: 2 to 150 psi range; 0.1 psi; 0.25%
accuracy full scale.
Metric: 14 to 1,034 kPa range; 1 kPa; 0.25%
accuracy full scale.
Three; 2 to 150 psi (14-1,034 kPa).
Three; 25/400 ml capacity with 0.1 ml burette graduations.
Water, vacuum, air pressure, drain and AC power supply.
21" w. x 36-3/4" h. x 7" d. (17" d. with legs);
(533 x 933 x 178 mm).
Net 50 lbs. (22.7 kg).

Ordering Information
EI25-0696/02.
EI25-0696/01.
EI25-0697/02.
EI25-0697/01.

English. 110vAC, 50/60 Hz, 1.


English. 220vAC, 50/60 Hz, 1.
Metric. 110vAC, 50/60 Hz, 1.
Metric. 220vAC, 50/60 Hz, 1.

Accessories
EI25-0697/10. 10 ml Burette Assembly for manual pore pressure
measurements.
EI25-0698.
Water De-Airing Tank System.
EI25-0699.
Auxiliary Control Panel.
Special Note:
Compressed air, water and vacuum source required for panel operation.

14

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
TRIAXIAL

Tri-Flex 2 Auxiliary Control Panel


Increases testing capacity of the system without duplicating
the major control functions and pressure displays of the
Master Control Panel.
Provides six independent control pressure regulators for
complete flexibility while testing multiple samples.
Simple flip switch displays pressure setting for each regulator
on the Master Control Panel digital Pressure Meter display.
Bridging feature allows user to set pressure on two to six
burette channels using one regulator.
For greater productivity in the laboratory,Tri-Flex 2 Auxiliary Control Panels are
designed to increase the Tri-Flex 2 Systems testing capacity without duplicating the
major control functions and pressure displays of the Master Control Panel.The
panels work with the Master Control Panel to provide the overall system with the
capacity to test from three to five specimens at one time each with its own
independent pressure settings.

Tri-Flex 2 Water De-Airing Tank System


Economical means of creating de-aired water.
Constructed of clear acrylic for easy viewing.
Pressure relief valve for operator safety.

Easy to install and operate, the Auxiliary Control Panel is quickly hooked up to the
Master Control Panel by using the quick connections on the panel back. Quick
disconnects on the front panel board assure fast connection or removal of the test cell.

Designed for use with the Master Control Panel, the Water De-Airing Tank System
allows the user to inexpensively prepare de-aired water for the system.The unit is
supplied complete with all necessary connectors and tubing for easy addition to
the Tri-Flex 2 Master Control Panel.

Like the Master Control Panel, the Auxiliary Control Panel has a bridging feature
and the burette/annulus system allows easy saturation of the test specimen
without refilling the burettes with water.

Specifications

Specifications
Measurement Range.
Burette Pressure Regulators.
Burette/Annulus.
Utilities Required.
Dimensions.
Weight.

10-4 to 10-10 cm/sec.


Six; 2 to 150 psi (14-1,034 kPa).
Six; 25/400 ml capacity with 0.1 ml burette
graduations.
Water, vacuum, air pressure and drain through
connection to the Master Control Panel.
27" w. x 36-3/4" h. x 7" d. (17" d. with legs);
(686 x 933 x 178 mm).
Net 80 lbs. (36.3 kg).

Construction.
Seals.
Relief Valve.
Capacity.
Dimensions.
Weight.

Clear acrylic construction with stainless steel threaded clamping


rods.
O-ring, top & bottom.
Preset at 10 psi (69 kPa).
1.4 gals. (5.3 liters).
6" diam. x 16" (152.4 x 406.4 mm).
Net 7.5 lbs. (3.4 kg).

Ordering Information
EI25-0698.
Special Note:
Requires Master Control Panel for operation.

Ordering Information
EI25-0699.

Accessories
EI25-0697/10. 10 ml Burette Assembly for manual pore pressure
measurements.
EI25-0698.
Water De-Airing Tank System.
EI25-0699.
Auxiliary Control Panel.
Special Note:
One Tri-Flex 2 Master Control Panel is required for system operation.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

15

Soil
TRIAXIAL

Digital Load and Displacement Readout Set


ASTM D-2850, D-4767; AASHTO T-296, T-297.

Digital Pressure Gauge


ASTM D-4767, D-5084; AASHTO T-296, T-297.
250 psi (1,700 kPa) capacity range.
LCD display with tare, reset and peak hold functions.
Swivel handle assembly for easy transport and viewing angle
adjustment.
Supplied complete with de-airing block assembly and fittings
for use on ELE/Soiltest triaxial or permeability test cells
The accurate monitoring and measurement of pore water pressures within a test
specimen are necessary during effective stress triaxial tests, or for determining the
level of saturation (B parameter) during the saturation stages of triaxial and permeability testing.
The Digital Pressure Gauge has been specifically designed to meet these accurate
measurement requirements.
The readout features a bright LCD display that updates twice every second. Each
system is supplied complete with a highly stable pressure gauge with de-airing
block assembly for fast connection to any ELE/Soiltest triaxial or permeability test
cell.

Specifications
Capacity.
Display.
Display Units.
Accuracy.
Read Rate.
Power Supply.
Battery Life.
Dimensions.
Weight.

250 psi (1,700 kPa).


LCD.
PSI, kPa, MPa.
Better than 1% of indicated pressure.
Two samples per second.
3 volt battery, CR 2340 type.
1400 hours continuous operation.
2.30" w. x 1.25" d. x 3.75" h. (59 x 32 x 95 mm.
Net 1/4 lb. (125g).

Easy to install on the Tritest 50 series load frame.


Accurately displays both load and axial strain values.
Bright, 4-digit LED displays with tare, reset and peak hold
functions.
Swivel handle assembly for easy transport and viewing angle
adjustment.
Available in either English or Metric display models.
Accurate monitoring and recording of load and axial displacement of the
specimen are easily accomplished by means of the Digital Load and Displacement
Readout.
Available in either English or Metric models, the series features a two channel
digital readout unit with bright 4-digit LED display that updates three times every
second. Each system is supplied complete with a 2,000 lb. (8.9 kN) capacity
S-type load cell, 2" (50 mm) range axial strain transducer and mounting hardware
for use on the Tritest 50 series load frame.

Specifications
Displays.
Display Units.
Read Rate.
Warm-Up Time.
Operating Temp.
Load Cell.
Strain Transducer.
Dimensions.
Weight.

Two, 4-digit red 14 segment LED displays.


English models in lbf and inches; Metric models in kN and mm.
Three samples per second; automatic polarity.
30 minutes for rated accuracy.
32F - 120F (0C - 50C).
2,000 lb. (8.9 kN) capacity; S-type.
2" (50 mm) range.
9.3" w. x 9.3" d. x 3.2" h. (236 x 236 x 81.3 mm).
Net 8 lbs. (3.6 kg).

Ordering Information
EI27-1115/02.
EI27-1115/01.
EI27-1116/02.
EI27-1116/01.

English display. 110vAC, 50/60 Hz, 1.


English display. 220vAC, 50/60 Hz, 1.
Metric display. 110vAC, 50/60 Hz, 1.
Metric display. 220vAC, 50/60 Hz, 1.

Ordering Information
EI27-1620.
EI27-1621.

For ELE Triaxial Cells.


For Tri-Flex 2 Triaxial and Permeability Cells.

16

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
PERMEABILITY

Tri-Flex 2 Five-Cell
Permeability Test System

Tri-Flex 2 Three-Cell
Permeability Test System

ASTM D-5084.

ASTM D-5084.

For high volume commercial laboratory testing, the Tri-Flex 2 Five-Cell


Permeability Test System offers the user the capabilities to test up to five
samples at a time, each with its own individual pressure settings.

Similar to the five-cell system, the Tri-Flex 2 Three-Cell Permeability Test System
includes three additional test cells and our Tri-Flex 2 Auxiliary Control Panel. Using
this configuration, users can test up to three samples at a time, each with its own
individual pressure settings.

Ordering Information
Set includes: 1
2
1
5
5
5
5
5
1
1
1

EI25-0688/02.
EI25-0688/01.
EI25-0689/02.
EI25-0689/01.

Tri-Flex 2 Master Control Panel


(25-0696/0x or 25-0697/0x).
Tri-Flex 2 Auxiliary Control Panel (25-0699).
Tri-Flex 2 Water De-airing Tank System (25-0698).
Tri-Flex 2 Permeability Test Cell (25-0690).
2.8" or 70 mm Acrylic Cap and Base Set
(25-0690/15 or 25-0690/10).
2.8" or 70 mm Porous Stones, pack of 2
(25-6721 or 25-6561).
2.8" or 70 mm Membrane Sealing Rings, pack of 10
(25-6641 or 25-6461).
2.8" (70 mm) Membranes, pack of 10 (25-6441).
2.8" (70 mm) O-ring Placing Tool (25-6470).
2.8" (70 mm) Membrane Tester (25-6443).
2.8" or 70 mm Suction Membrane Device
(25-6660 or 25-6480).

110vAC, 50/60 Hz, 1, English.


220vAC, 50/60 Hz, 1, English.
110vAC, 50/60 Hz, 1, Metric.
220vAC, 50/60 Hz, 1, Metric.

Special Note:
For test applications involving toxic permeants, stainless steel Cap and Base Sets and
two Pressure Interface Chambers are required for each test cell.

Ordering Information
Set includes: 1
1
1
3
3
3
3
3
3
1
1
1

EI25-0686/02.
EI25-0686/01.
EI25-0687/02.
EI25-0687/01.

Tri-Flex 2 Master Control Panel


(25-0696/0x or 25-0697/0x).
Tri-Flex 2 Auxiliary Control Panel (25-0699).
Tri-Flex 2 Water De-airing Tank System (25-0698).
Tri-Flex 2 Permeability Test Cell (25-0690).
2.8" or 70 mm Acrylic Cap and Base Set
(25-0690/15 or 25-0690/10).
2.8" or 70 mm Porous Stones, pack of
(25-6721 or 25-6561).
2.8" or 70 mm Membrane Sealing Rings, pack of 10
(25-6641 or 25-6461).
2.8" (70 mm) Membranes, pack of 10 (25-6441).
2.8" (70 mm) O-ring Placing Tool (25-6470).
2.8" (70 mm) Membrane Tester (25-6443).
2.8" or 70 mm Suction Membrane Device
(25-6660 or 25-6480).

110vAC, 50/60 Hz, 1, English.


220vAC, 50/60 Hz, 1, English.
110vAC, 50/60 Hz, 1, Metric.
220vAC, 50/60 Hz, 1, Metric.

Special Note:
For test applications involving toxic permeants, stainless steel Cap and Base Sets and
two Pressure Interface Chambers are required for each test cell.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

17

Soil
PERMEABILITY

Tri-Flex 2 One-Cell
Permeability Test System

Ordering Information
Set includes: 1

ASTM D-5084.
1
1
1
1
1

With the Tri-Flex 2 One-Cell Permeability Test System, efficient and accurate
permeability testing of a wide range of construction materials can easily be
conducted.
The complete one-cell system consists of the Tri-Flex 2 Master Control Panel with
water de-airing system, one Tri-Flex 2 Permeability Test Cell complete with platens
for testing either 2.8" or 70 mm diameter specimens, and a complete range of
sample preparation tools.

1
1
1
1
1

EI25-0684/02.
EI25-0684/01.
EI25-0685/02.
EI25-0685/01.

Tri-Flex 2 Master Control Panel


(25-0696/0x or 25-0697/0x).
Tri-Flex 2 Water De-airing Tank System (25-0698).
Tri-Flex 2 Permeability Test Cell (25-0690).
2.8" or 70 mm Acrylic Cap and Base Set
(25-0690/15 or 25-0690/10).
2.8" or 70 mm Porous Stones, pack of 2
(25-6721 or 25-6561).
2.8" or 70 mm Membrane Sealing Rings, pack of 10
(25-6641 or 25-6461).
2.8" (70 mm) Membranes, pack of 10 (25-6441).
2.8" (70 mm) O-ring Placing Tool (25-6470).
2.8" (70 mm) Membrane Tester (25-6443).
2.8" or 70 mm Suction Membrane Device
(25-6660 or 25-6480).

110vAC, 50/60 Hz, 1, English.


220vAC, 50/60 Hz, 1, English.
110vAC, 50/60 Hz, 1, Metric.
220vAC, 50/60 Hz, 1, Metric.

Special Note:
For test applications involving toxic permeants, stainless steel Cap and Base Sets and
two Pressure Interface Chambers are required for each test cell.

18

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
PERMEABILITY

Pressure Interface Chamber


Stainless steel lower chamber and base construction with
Viton diaphragm and O-rings.
Supplied with all necessary valves and tubing.
Specifications
Construction.
Weight.

Stainless steel base and lower chamber; clear acrylic upper


chamber and top;Viton diaphragm and O-rings.
Net 12 lbs. (5.5 kg).

The Pressure Interface Chamber (PIC) is used during permeability test application
involving toxic permeants.The chambers provide a closed system for toxic liquids
entering and exiting the test cell.

Ordering Information
Note: Two Pressure Interface Chambers are required for use with each test cell.
EI25-0695.

Sample Preparation Tools


Please refer to page 13 for a complete listing of available tools used to properly
prepare specimens for testing.

Tri-Flex 2 Master Control Panel


Please refer to page 14 for complete specifications on the Tri-Flex 2 Master
Control Panel and accessories.

Three independent channels of pressure control.


Digital pressure display system to an accuracy of 0.25% of
reading within range.
User friendly burette system.
Easy removal of burette/annulus assembly for cleaning.
Bridging feature to set multiple burette pressures with one
regulator.
Quick disconnects for easy system setup.
Easily expands for multi-cell test.
Ordering Information
EI25-0696/02.
EI25-0696/01.
EI25-0697/02.
EI25-0697/01.

English. 110vAC, 50/60 Hz, 1.


English. 220vAC, 50/60 Hz, 1.
Metric. 110vAC, 50/60 Hz, 1.
Metric. 220vAC, 50/60 Hz, 1.

Accessories
EI25-0697/10. 10 ml Burette Assembly for manual pore pressure
measurements.
EI25-0698.
Water De-Airing Tank System.
EI25-0699.
Auxiliary Control Panel.
Special Note:
Compressed air, water and vacuum source required for panel operation.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

19

Soil
PERMEABILITY
Specifications
Specimen Size.

1.4" (35 mm) to 4" (102 mm) diam. using optional Cap and
Base Sets, not included.
Anodized aluminum with quick-disconnect fill/vent port and
three clamping rods.
Stainless steel with four stainless steel no-volume change ball
valves for inflow and outflow ports and one brass no-volume
change ball valve for lateral port.
Clear acrylic.
150 psi (1,034 kPa).
Teflon and stainless steel.
Approx. 8" diam. x 15" h. (203 x 381 mm). Excluding valves.
Net 23 lbs. (10.4 kg).

Head Assembly.
Base Assembly.

Cylinder.
Max. Pressure.
Tubing.
Dimensions.
Weight.

Ordering Information
EI25-0690.

Accessories
EI25-0695.

Pressure Interface Chamber.Two required per cell.

Permeability Cell Accessories


Cap & Base Sets:
1.4" (35 mm)
2.416"
2.8"
70 mm
4.0"
100 mm

Acrylic
EI25-0690/13
EI25-0690/14
EI25-0690/15
EI25-0690/10
EI25-0690/17
EI25-0690/12

Stainless Steel
EI25-0695/13
EI25-0695/14
EI25-0695/15
EI25-0695/10
EI25-0695/17
EI25-0695/12

Porous Stones (Pack of 2):


1.4" (35 mm)
EI25-4461
2.416"
EI25-5661
70 mm
EI25-6561
2.8"
EI25-6721
100 mm
EI25-7661
4.0"
EI25-7761

Tri-Flex 2 Permeability Test Cell


ASTM D-5084.
Corrosion resistant construction.
Double drainage lines.
Accepts a wide range of samples.
The Tri-Flex 2 Permeability Test Cell incorporates many new features that promote
ease in specimen preparation and installation.The cell consists of an aluminum
alloy head assembly and a stainless steel base for corrosion resistance and long
service life. Stainless steel no-volume change type valves at all specimen inflow and
outflow ports provide additional corrosion resistance and prevention of pressure
changes during permeability test procedures.

Sealing Rings (Pack of 10):


1.4" (35 mm)
EI25-4281
2.416"
EI25-5663
70 mm
EI25-6461
2.8"
EI25-6641
4.0" (100 mm)
EI25-7631
Rubber Membranes (Pack of 10):
1.4" (35 mm)
EI25-4261
2.416"
EI25-5665
2.8" (70 mm)
EI25-6441
4.0" (100 mm)
EI25-7621

Through the use of the cells optional Platen Sets, the Tri-Flex 2 Permeability Test
Cell can accept specimens ranging in size from 1.4" (35 mm) to as large as 4"
(102 mm) in diameter. Depending on test requirements, all Platen Sets are
available in either acrylic or stainless steel construction.

20

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
PERMEABILITY

Double Ring Infiltrometer


Guelph Permeameter
ASTM D-5126.
Lightweight and portable for easy transportation.
Test time of two hours or less.
Requires only 2.5 liters of water.
The Guelph Permeameter is a constant head permeameter that measures
in-situ hydraulic conductivity. It is a simple to operate, portable unit that requires
very little training to use. Only one person is needed to perform the test.
The method involves measuring the steady-state rate of water recharge into
unsaturated soil from a cylindrical well hole, in which a constant head of water is
maintained. Calculations are made to determine the hydraulic conductivity, soil
sorptivity and soil matrix flux potential. Depending on the soil type, tests can take
between 1/2 hour and 2 hours using only 2.5 liters of water.

Specifications
Permeameter.
Auger.
Carrying Case.
Test Time.
Test Depth.
Hydraulic Conductivity Range.
Weight.

High impact polycarbonate, molded elastomers.


2" (50.8 mm) diam.; machined steel.
Die-cut foam for parts storage.
1/2 2 hours.
15 to 75 cm (0.5 to 2.5 ft).
10-4 to 10-8 m/sec (10-2 to 10-6 cm/sec).
Net 30 lbs. (13.6 kg).

ASTM D-3385.
Determines infiltration rate of various soils.
Heavy-duty aluminum rings for rust resistance and long life.
Graduated Mariotte tubes for inner and outer rings.
The Double-Ring Infiltrometer provides comparative information that is useful for
determining erosion rates, leaching and drainage efficiencies, irrigation patterns,
rainfall and evaluation of potential septic tank disposal fields.
The instrument consists of two concentric rings, driving cap, two graduated
Mariotte tubes, square neoprene splash guards and complete instructions.The two
rings are driven into the ground and filled with water.The outer ring acts as a
barrier to encourage only vertical flow from the inner ring.

Specifications
Rings.
Driving Cap.
Splash Guards.
Mariotte Tubes.
Weight.

Aluminum; two included, 12" i.d. x 20" h. (305 x 508 mm) and
24" i.d. x 20" h. (610 x 508 mm).
Aluminum; 1/2" (12.7 mm) thick; with centering pins.
Neoprene; two included; 6" (152 mm) square.
Graduated; two included; 3,000 ml and 10,000 ml capacities.
Net 70 lbs. (31.7 kg); Shpg. 90 lbs. (40.8 kg).

Ordering Information
EI25-0660.

Ordering Information
EI25-0650.

Accessories
EI25-0655.

Permeameter Extension Kit. 31-1/2" (800 mm) long. Increases


test depth to 155 cm (5.16 ft).

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

21

Soil
PERMEABILITY
Constant Head Sand/Gravel Permeameters
ASTM D-2434.

Meets ASTM D-2434 Test Specifications.


Available in a wide range of sizes.
Supplied complete with tubing and hardware.
Accessory Manometer Panel and Constant Head Tank
Assemblies.

The Sand/Gravel Permeameter is used specifically for testing the permeability of


granular soils. Manufactured in accordance with ASTM D-2434 test specifications,
the permeameter is designed to provide accurate results when performing the
constant head test method for the laminar flow of water through granular
materials. A range of models to accommodate different particle sizes of specimens
is available.
Each Permeameter comes equipped with valves, porous stones and tubing for
connection to a water source, vacuum, and manometer tubes.To prevent soil
density changes during the test, a spring is incorporated in the top cap to apply
5 to10 lbf. (2.2 to 4.5 kg) against the top porous stone.
Two manometer ports are grooved and screened on the inside of the chamber.
The screens prevent material from migrating through the valves and tubing during
testing.The acrylic chamber permits viewing of the sample during testing.The end
caps and clamping ring are constructed of anodized aluminum for rust resistance
and long service life.

Specifications
Construction.

Anodized aluminum end caps and clamping ring acrylic


chamber.
Two. Located on the acrylic chambers side wall.The distances
between ports are equal to the diameter.
Three; quick release type.
Net 7-12 lbs. (3.2-5.4 kg).

Manometer Ports.
Clamping Rods.
Weights.

Ordering Information
Note: Manometer Panel and Constant Head Tank System; not included, order
separately.
EI25-0562.
EI25-0563.
EI25-0564.

3.0" (76 mm) i.d.


4.5" (114 mm) i.d.
6.0" (152 mm) i.d.

Accessories
EI25-0567.
EI25-0568.

Wall Mounted Manometer Panel.


Constant Head Tank System.

Constant Head Tank System

Manometer Panel

ASTM D-2434.

ASTM D-2434.
The Manometer Panel features two acrylic tubes and valving mounted on an
aluminum rail with a 100 cm long dual-graduated scale. Each tube has its own
valve, making it possible to run two independent permeability tests.

Specifications
Scale.
Rail.
Flow Tubes.
Weight.

100 cm long with cm and mm graduations.


Aluminum construction with holes for wall mounting.
Acrylic; each with its own flow control valve.
Net 7 lbs. (3.2 kg).

The system consists of an acrylic tank with regulating valve for flow control of
water. A porous media is used at the bottom of the tank to filter out air bubbles.
The unit maintains a constant water head by utilizing an overflow port. It also
allows for connection to a tap water or de-aired water source. A wall mounting
support, consisting of two rails with adjustable height brackets and tubing for
connection between the tank and permeameter is included.

Specifications
Tank.
Other Components.
Weight.

1000 cc. capacity, Clear acrylic with regulating valve.


Wall mount, tubing and saddle valve.
Net 8 lbs. (3.6 kg).

Ordering Information
EI25-0567.

Ordering Information
EI25-0568.

22

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
PERMEABILITY

Compaction Permeameters

Combination Permeameter
Constant or Falling Head

Available in either 4" (101.6 mm) or 6" (152.4 mm) diameter


models.
Sturdy construction for testing all types of materials.
Overflow valve assembly permits easy air removal before
testing.

Plated steel chamber head assembly.


Rust-resistant cast aluminum base assembly.
Includes accessories for conducting both constant and falling
head permeability studies.

Compaction Permeameters are designed for performing either constant head or


falling head permeability tests on undisturbed, remolded or compacted soils.

Specifications
Mold.
Capacity.

Machined seamless steel tubing; plated.


EI25-0618: 1/30 cu. ft.; 4" i.d. x 4.584" h. (101.6 x 116.4 mm).
EI25-0619: 0.1145 cu. ft.; 6" i.d. x 7" h. (152.4 x 177.8 mm).
2" h. (50.8 mm); machined seamless steel tubing; fits either end.
of mold; plated.
Cast aluminum; with overflow valve assembly and water
connection.
Cast aluminum; with inlet/outlet fitting.
EI25-0618: 4" diam. x 1/2" thick (101.6 x 12.7 mm).
EI25-0619: 5-15/16" diam. x 1/2" thick (150.8 x 12.7 mm).
50-70 permeability rating; 225 micron, average pore size.
EI25-0618: Net 12 lbs. (5.4 kg).
EI25-0619: Net 24 lbs. (10.9 kg).

Collar.
Top.
Base.
Porous Stone.

Weights.

The Combination Permeameter is designed for laboratory determinations of


permeability of either fine-grained or coarse-grained soils. Generally, soils
containing 10 percent or more particles passing a no. 200 sieve are tested using
the falling head assembly. More granular soils, containing 90 percent or more
particles retained on the no. 200 sieve, are tested using the constant head
assembly.
In constant head permeability testing, a plastic funnel reservoir with overflow port
is mounted on an upright attached to the chamber head. A maximum head of up
to 55 cm is possible by placement of the reservoir on the upright.
Falling head permeability studies are possible using the graduated pipette falling
head reservoir which has a volume of 100 cc. Maximum head is 100 cm. Clear
plastic chamber accepts 2-1/2" (63.5 mm) diameter specimens, ranging from
2-1/2" (63.5 mm) to 5-1/2" (140 mm) long.

Specifications
Specimen Size.

Ordering Information
EI25-0618.
EI25-0619.

Compaction Permeameter, 4" (101.6 mm).


Compaction Permeameter, 6" (152.4 mm).

Accessories
EI25-0620.

Constant and Falling Head Accessory Kit. Includes a burette and


meter stick for falling head tests and a constant head funnel both
mounted on a support stand.

Chamber.
Base.
Top Seal.
Porous Stones.

Constant Head.
Falling Head.
Weight.

2-1/2" diam. x 2-1/2" l. max. (63.5 x 63.5 mm) when using


lower chamber only; 2-1/2" diam. x 5-1/2" l. max.
(63.5 x 140 mm) when using both lower and extension
chambers.
Clear lucite; 1/4" (6.3 mm) wall; two sections.
Cast aluminum.
Plated steel with gaskets.
Mounts at top and bottom; 2.47" diam. x 1/2" thick
(62.7 x 12.7 mm); 105-120 permeability rating; 300 micron,
average pore size.
Plastic; funnel reservoir; 55 cm maximum head.
Graduated pipette; 100 cc x 0.2 cc; 100 cm. maximum head.
Net 11 lbs. (5 kg).

Ordering Information
EI25-0623.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

23

Soil
SHEAR
Specifications
Sample Size.

Accepts either 2.42", 2.5" diam.; 60 mm, 100 mm square


samples using accessory shear box assemblies, not included.
Variable in either English or Metric units between 0.000001"
(0.00001 mm) to 0.399999" (9.99999 mm) per minute.
1,000 lbf. (4.5 kN) maximum.
2,200 lbf. (1,000 kN) using 10:1 lever ratio.
44.7" l. x 12.6" w. x 49.6" h. (1,135 x 320 x 1,260 mm).
Net 181 lbs. (82 kg).

Speed range.
Shear Force.
Vertical Load.
Dimensions.
Weight.

Ordering Information
Note: Shear Box, dial indicators, transducers, proving ring or loading weights; not
included, order separately.
EI26-2114/02. 110-120vAC, 50/60 Hz, 1.
EI26-2114/01. 220-240vAC, 50/60 Hz, 1.

Accessories
Note: See following page for a complete listing of Shear Box Assemblies.
EI25-0440.
EI25-0445.
EI88-4110.
EI88-4100.
EI78-0060.
EI78-0080.
EI78-0160.
EI78-0180.
EI78-0260.
EI78-0280.
EI25-0535.
EI25-0537.

Vertical Dial Indicator. Metric.


Vertical Dial Indicator. English.
Horizontal Dial Indicator. Metric.
Horizontal Dial Indicator. English.
Compression Proving Ring. 450 lb. (2 kN).
Compression/Tension Proving Ring. 450 lb. (2 kN).
Compression Proving Ring. 650 lb. (3 kN).
Compression/Tension Proving Ring. 650 lb. (3 kN).
Compression Proving Ring. 1,000 lb. (4.5 kN).
Compression/Tension Proving Ring. 1,000 lb. (4.5 kN).
Weight Set. Set of four 1 kg, five 4 kg and four 16 kg weights.
Weight Set. Set of four 1 kg, three 4 kg and one 16 kg weights.

Direct/Residual Shear Apparatus


ASTM D-3080; AASHTO T-236.

Microprocessor controlled drive system.


Large on-board LCD screen display.
Direct entry of shear speeds via touch sensitive keypad.
Rapid approach and return to start datum.
Fully variable speed control from 0.000001" (0.00001 mm)
to 0.399999" (9.99999 mm) per minute.
Accepts specimens up to 4" (100 mm) square using
optional shear boxes.
The ELE Direct/Residual Shear Apparatus uses a microprocessor controlled,
menudriven drive system with keyboard entry for precise shear speed setting and
control.
The use of a microprocessor controlled drive system and keyboard entry provides
the unit with a wide range of features which include pause and speed reset during
testing, RS232C interface for computer control, operator programming of speed
and control functions, self-test diagnostics and many other features. A return to
start datum provides a positive means of reversing the shear box when either
preparing for a new test or continuing with residual testing procedures. Safety forward/reverse travel limit switches are incorporated into the system as standard
and are monitored through the electronics.
The electronics are housed in a modern styled shroud, which is adjustable for optimum viewing.The apparatus is enclosed in a durably constructed case and has
been designed for bench mounting.
The apparatus is supplied complete with carriage, loading weight hanger and 10:1
lever ratio loading device.

24

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
SHEAR
Direct/Residual Shear Test Set
ASTM D-3080; AASHTO T-236.
This test set includes all of the basic equipment required to perform
direct/residual shear testing on either 2.5" diameter or 60 mm square soil
specimens.

Ordering Information
Set includes: 1
1
1
1
1
1
1
EI2100/02.
EI2100/01.
EI2101/02.
EI2101/01.

Direct/Residual Shear Apparatus (26-2114/0x).


2.5" diam. or 60 mm square Shear Box
(26-2213 or 26-2181).
2.5" diam. or 60 mm square Specimen Cutter
(26-2217 or 26-2185).
Vertical Dial Indicator (25-0445 or 25-0440).
Horizontal Dial Indicator (88-4100 or 88-4110).
Compression/Tension Proving Ring (78-0280).
Weight Set (25-0535).

110vAC, 50/60 Hz, 1. English.


220vAC, 50/60 Hz, 1. English.
110vAC, 50/60 Hz, 1. Metric.
220vAC, 50/60 Hz, 1. Metric.

DataSystem Direct/Residual Shear Test Set


ASTM D-3080; AASHTO T-236.

Shear Box Assemblies


ASTM D-3080; AASHTO T-236.
All ELE Shear Box Assemblies are designed to fit into the carriage of the
EI26-2114 series Direct/Residual Shear Machines.They are supplied complete
with two porous stones, one retaining stone and a loading pad.The four sizes
offered comply with the relevant ASTM, AASHTO and BS standards. All
assemblies can be used for quick shear tests or drained/residual shear test
applications.

This test set includes equipment required to perform direct/residual shear testing
on either 2.5" diameter or 60 mm square soil specimens with automated data logging, analysis, and reporting.

Ordering Information
Set includes: 1
1
1

Ordering Information
EI26-2181.
EI26-2197.
EI26-2213.
EI26-2223.

1
1
1
1
1
1

60 x 60 mm Square Shear Box Assembly.


100 x 100 mm Square Shear Box Assembly.
2.5" Diameter Shear Box Assembly.
2.42" Diameter Shear Box Assembly.

Accessories
EI26-2185.
EI26-2189.
EI26-2201.
EI26-2205.
EI26-2217.
EI26-2221.

60 x 60 mm Square Specimen Cutter.


60 x 60 mm Square Specimen Extrusion Tool.
100 x 100 mm Square Specimen Cutter.
100 x 100 mm Square Specimen Extrusion Tool.
2.5" Diameter Specimen Cutter.
2.5" Diameter Specimen Extrusion Tool.

Replacement Parts
EI26-2181/10.
EI26-2197/10.
EI26-2213/10.
EI26-2223/10.

60 x 60 mm Square Porous Stone.


100 x 100 mm Square Porous Stone.
2.5" Diameter Porous Stone.
2.42" Diameter Porous Stone.

EI2102/02.
EI2102/01.
EI2103/02.
EI2103/01.

Direct/Residual Shear Apparatus (26-2114/0x).


2.5" diam. or 60 mm square Shear Box
(26-2213 or 26-2181).
2.5" diam. or 60 mm square Specimen Cutter
(26-2217 or 26-2185).
ADU 8-Channel Data Acquisition Unit (27-1495/0x).
Direct/Residual Shear Software (27-1790).
Vertical Displacement Transducer (27-1689).
Horizontal Displacement Transducer (27-1697).
2,000 lb. (8.9 kN) S-Type Load Cell (27-1853).
Weight Set (25-0535).

110vAC, 50/60 Hz, 1. English.


220vAC, 50/60 Hz, 1. English.
110vAC, 50/60 Hz, 1. Metric.
220vAC, 50/60 Hz, 1. Metric.

Note: Computer hardware and peripherals required for system operation; not
included. Contact factory for system requirements.
Special Note:
See Data Acquisition section for specifications of electronic displacement and logging
equipment.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

25

Soil
C O N S O L I DAT I O N
Ordering Information
Note: Shown with consolidometer, dial indicator loading weights and floor mounting
stand; not included, order separately.
EI25-0402.

Accessories
EI25-0429.
EI25-0479.
EI25-0455.
EI25-0503.
EI25-0530.
EI88-4070.
EI88-4080.
EI88-4120.
EI88-4130.
EI25-0535.
EI25-0537.
EI25-0544.

Floor Mounting Stand.


2.5" Fixed Ring Consolidometer.With cutting (specimen) ring.
50 mm Fixed Ring Consolidometer. With cutting (specimen) ring.
75 mm Fixed Ring Consolidomerer. With cutting (specimen) ring.
2.5" Floating Ring Consolidometer.
Dial Indicator. 0.4" range x 0.0001" graduations.
Dial Indicator. 10 mm range x 0.0025 mm graduations.
Dial Indicator. 1.0" range x 0.001" graduations.
Dial Indicator. 25 mm range x 0.010 mm graduations.
Weight Set A. Includes: four 1 kg, five 4 kg, and four 16 kg weights.
Weight Set B. Includes: four 1 kg, three 4 kg and one 16 kg weights.
16 Ton Weight Set. Includes: two 1/16 ton, one 1/8 ton, one 1/4
ton, one 1/2 ton, one 1 ton and seven 2 ton weights.

Table Top Consolidation Set


ASTM D-2435, D-4546; AASHTO T-216.

Table Top Consolidation Apparatus


ASTM D-2435, D-4546; AASHTO T-216.
Loading Pressures on 2.5" (63 mm) diameter samples of up to
48 tons per sq. ft. (5,148 kPa) using 11:1 beam ratio.
Triple beam ratios of 9:1, 10:1 and 11:1 minimize loading
weight requirements.
Rigid frame construction ensures accuracy, repeatability and
reliability of test results.
Integral beam support jack eliminates possible shock to
sample during load application procedures.
Compact, table top design for maximum space savings in the
laboratory.
Cast aluminum and plated steel construction for rust
resistance and long life.
Consolidation tests are performed in the laboratory to determine the settlement
characteristics of soil over a period of time.The data obtained from tests on
a small sample in the laboratory can be used to predict the settlement of a
foundation under a building, dam, bridge, or similar structure.
The Table Top Consolidation Apparatus is a compact machine designed to provide
reliable, accurate and reproducible results.The apparatus features a rigid loading
mechanism, capable of applying loads for long durations. Load pressures of up to
48 tons per sq. ft. (5,148 kPa) can be generated on 2.5" (63 mm) diameter
samples.

The Consolidation Test Set consists of a basic selection of equipment needed to


perform consolidation testing of soils.

Ordering Information
Set includes: 1
1
1
1
EI2200.
EI2210.
EI2220.

With English dial indicator and kilogram weight set.


With English dial indicator and tsf weight set.
With Metric dial indicator and kilogram weight set.

DataSystem Consolidation Test Set


ASTM D-2435, D-4546; AASHTO T-216.
The DataSystem Consolidation Test Set is designed for performing consolidation
tests on soils to ASTM and AASTHO standards including options for automated
data logging, analysis, and reporting.

Ordering Information

The unit incorporates an integral beam support jack that eliminates the possibility
of shock to the sample during load application procedures.

Set includes: 1
1
1
1
1
1
1

Specifications

EI2230/02.
EI2230/01.

Load Capacity.
Loading Beam.
Frame.
Dimensions.
Weight.

48 tons/sq. ft. (5,148 kPa) on 2.5" (63 mm) diam. samples.


Cast aluminum; counterbalanced; 9:1,10:1 and 11:1 ratios.
Cast aluminum; integral beam support jack; plated steel and
platform.
8" w. x 28" d. x 20" h. (203 x 711 x 508 mm), excluding
weight hanger.
Net 30 lbs. (13.6 kg); Shpg. 40 lbs. (18.1 kg).

Table Top Consolidation Apparatus (25-0402).


Fixed Ring Consolidometer, 2.5 (25-0479).
Dial Indicator (88-4070) or 88-4080).
Weight Set (25-0535 or 25-0544).

Table Top Consolidation Apparatus (25-0402).


Fixed Ring Consolidometer, 2.5 (25-0479).
Weight Set (25-0535).
Floor Mounting Stand (25-0429).
ADU 8-Channel Data Acquisition Unit (27-1495/0x).
Consolidation Displacement Transducer (27-1649).
One Dimensional Consolidation Program (27-1770).

110vAC, 50/60Hz, 1.
220vAC, 50/60Hz, 1.

Note: Computer hardware and peripherals required for system operation; not
included. Contact factory for system requirements.
Special Note: See Data Acquisition section for specifications of electronic displacement
and logging equipment.

26

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
C O N S O L I DAT I O N
Specifications
Construction.
Maximum Load.
Req. Air Pressure.
Vertical Clearance.
Horizontal Clearance.
Max. Piston Travel.
Dimensions.
Weight.

Aluminum cabinet with enamel finish; 1" (25.4 mm) thick


aluminum load platform plate; stainless steel vertical rods.
32 tsf.
123 psi (848 kPa).
8.25" (210 mm).
7.75" (197 mm).
0.5" (12.7 mm).
12" w. x 14.5" d. x 20.5" h. (305 x 368 x 521 mm).
Net 48 lbs. (21.8 kg).

Ordering Information
Note: Shown with consolidometer and dial indicator; not included, order separately.
EI25-0560.

Pneumatic Consolidation Apparatus. 32 tsf capacity.

Accessories
EI25-0479.
EI25-0455.
EI25-0503.
EI25-0530.
EI88-4070.
EI88-4080.
EI88-4120.
EI88-4130.

Fixed Ring Consolidometer. For 2.5" diam. specimens.


Fixed Ring Consolidometer. For 50 mm diam. specimens.
Fixed Ring Consolidometer. For 75 mm diam. specimens.
Floating Ring Consolidometer. For 2.5" diam. specimens.
Dial Indicator. 0.4" range x 0.0001" graduations.
Dial Indicator. 10 mm range x 0.0025 mm graduations.
Dial Indicator. 1.0" range x 0.001" graduations.
Dial Indicator. 25 mm range x 0.010 mm graduations.

Pneumatic Consolidation Apparatus


ASTM D-2435, D-4546; AASHTO T-216.

Instantaneous loading without impact.


Complete flexibility in choice of loads.
Relatively insensitive to shock or inertia forces.
Compact size allows for table top operation without the need
for extraneous hanging weight assemblies.

Used worldwide for stress controlled consolidation testing, the Pneumatic


Consolidation Apparatus is a pneumatic load frame designed to apply loads
instantaneously and to maintain any set load, regardless of sample compression
occurring within the loading interval.The unit is self-contained with a built-in digital
display with 0.25% accuracy.
Available in three load ranges, the load frame uses a dual-piston system for
handling loads to 32 tsf while retaining sensitivity in the lower load ranges. A precision, low-bleed type of pressure regulator is used to set and maintain the load on
the specimen.
Adjustable centering pads on the load platform aid in aligning the consolidometer
and will accept any consolidometer up to a maximum diameter of 7.25" (184
mm).The top loading design eliminates time consuming weight calculations.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

27

Soil
C O N S O L I DAT I O N

Floating Ring Consolidometer


Floating type design eliminates friction between soil
specimen and ring.
Rust-resistant construction for long service life.

Fixed Ring Consolidometers


ASTM D-2435, D-4546; AASHTO T-216.
Specimen cutting ring for trimming directly from sample tubes.
Integral water reservoir for specimen inundation, when
required.
All Fixed Ring Consolidometers are manufactured from corrosion resistant
materials and incorporate an integral cutting ring for trimming specimens to size.
The design also features an integral water reservoir for specimen inundation. All
consolidometers are supplied complete with upper and lower porous stones,
pressure pad and specimen cutting ring.
Note: The following table shows typical loading of cells giving unit stress when
used with the ELE Table Top Consolidation Apparatus.

The Floating Ring Consolidometer is designed to eliminate the friction that occurs
between the soil specimen and ring in consolidation testing.The unit consists of a
one-piece machined base, porous stones, and specimen ring. All metal parts are
brass or phosphor bronze.The base is approximately 5" (127 mm) diameter by 3"
(76 mm) high.

Specifications
Specimen Size.
Base.
Specimen Ring.
Porous Stones.
Weight.

2.5" diam. x 1" h. (63.5 x 25.4 mm).


One-piece machined bronze; 5" diam. x 3" h. (127 x 76.2 mm).
Machined brass.
2-15/32" diam. x 1/2" thick (62.7 x 12.7 mm).
Net 13 lbs. (5.9 kg).

Typical Loading:
Model No.
Application.
Specimen Diameter.
Specimen Area.
Beam Ratio.
Load.
Stress.
Typical Maximum Stress.
Stress for 1 kg.

EI25-0479
ASTM
2.5"
4.909 in2
10:1
1.55 kg
1,000 lbf/ft2
103,200 lbf/ft2
645 lbf/ft2

EI25-0455
High Pressure
50 mm
1963 mm2
10:1
1 kg
50 kPa
8 MPa
50 kPa

EI25-0503.
BS
75 mm
4418 mm2
9:1
1 kg
20 kPa
3.2 MPa
20 kPa

Ordering Information
EI25-0530.

Replacement Parts
EI25-0533.
Specimen Ring. For 2.5" (63 mm) diam. samples.
EI25-0530/10. Porous Stone. 2-15/32" diam. x 1/2" thick (62.7 x 12.7 mm).

Ordering Information
EI25-0479.
EI25-0455.
EI25-0503.

Fixed Ring Consolidometer. For 2.5" diam. specimens.


Fixed Ring Consolidometer. For 50 mm diam. specimens.
Fixed Ring Consolidometer. For 75 mm diam. specimens.

Accessories
EI25-0485.
EI25-0461.
EI25-0509.

Calibration Disc for EI25-0479.


Calibration Disc for EI25-0455.
Calibration Disc for EI25-0503.

Replacement Parts
EI25-0482.
EI25-0458.
EI25-0506.
EI25-0479/13.
EI25-0455/13.
EI25-0503/13.

Cutting Ring for EI25-0479.


Cutting Ring for EI25-0455.
Cutting Ring for EI25-0503.
Upper and Lower Porous Stones, 2.5".
Upper and Lower Porous Stones, 50 mm.
Upper and Lower Porous Stones, 75 mm.

28

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
C O N S O L I DAT I O N

Expansion Index Test Apparatus


ASTM D-4829; California UBC 29-2.
Completely self-contained and compact design.
Accurate to 0.0001" (0.002 mm).
Testing time of 24 hours or less on cured soil specimens.
The Expansion Index Test Apparatus is a completely self-contained apparatus
designed for use in determining the expansion index of soils. Using the new
consolidation apparatus, contractors and laboratory technicians can conduct an
expansion test on a cured soil specimen in 24 hours or less.

Soil Volume Change Meter


Measures both shrinkage and swelling of soils.
Ideal for measuring swelling of clay soils.
Fast and easy to operate.
The Soil Volume Change Meter (PVC) is used to evaluate potentially dangerous
swelling or shrinking conditions existing in some clay soils used in residential and
commercial developments.

The apparatus is designed to control all of the variables that influence the
expansive characteristics of a particular soil while still performing a practical test
for general engineering use.

The device was originally developed by the Federal Housing Administration after
considerable research to provide satisfactory background laboratory testing data,
a summarization of mechanisms causing volume change in soils and the factors
influencing these changes. PVC refers to the maximum possible volume change
that a soil could undergo when subjected to changing moisture conditions.

The unit consists of a cast aluminum base and collar, stainless steel specimen ring,
porous stones, dial indicator, and a 12.6 lb. (5.7 kg) loading weight.

The unit is supplied complete with a 1,000 lb. (4.5 kN) capacity proving ring and
compaction hammer.

Specifications

Specifications

Base and Collar.


Specimen Ring.
Porous Stones.
Loading Weight.
Dial Indicator.

Cast aluminum construction; brass hold-down rods.


Stainless steel; 4" i.d. x 1" h. (101.6 x 25.4 mm).
4" diam. x 1/2" thick (101.4 x 12.7 mm).
Brass; 12.6 lbs. (5.7 kg).
EI25-0380: 0.3" range x 0.0001" graduations.
EI25-0385: 8 mm range x 0.002 mm graduations.
24 hours or less on cured sample.
6" diam. x 11" h. (152 x 279 mm).
Net 18 lbs. (8.2 kg).

Test Duration.
Dimensions.
Weight.

Mold Assembly.
Proving Ring.
Other Components.
Specimen Ring.
Sample Size.
Water Required.
Charts.
Dimensions.
Weight.

Includes porous stones and loading cap.


1,000 lb. (4.5 kN) capacity; dial indicator.
Loading pistons; compaction hammer.
2-3/4" (70 mm) diam.
10 teaspoons.
5 oz.
Convert readings to lbs./sq. ft. and then to PVC
(Potential Volume Change) rating.
7-1/4" diam. base x 15-1/2" h. (184 x 394 mm).
Net 25 lbs. (11.3 kg).

Ordering Information
EI25-0380.
EI25-0385.

English.
Metric.

Ordering Information
EI25-0390.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

29

Soil
UNCONFINED COMPRESSION

Unconfined Compression Tester,


Hand Operated

Versa-LoaderTM
ASTM D-2166; AASHTO T-208.
10,000 lbf. (45 kN) maximum load capacity.
Accurate loading speeds from 0.08" (2.032 mm) to as low as
0.001" (0.025 mm) per minute.
Push-button Up-Down-Stop operation with overtravel limit
switch protection.
Highly versatile can be used for Quick Undrained Triaxial,
Unconfined Compression, CBR and Soil Cement testing with
proper accessories.
Please refer to page 11 for complete specifications on the Versa-LoaderTM series
load frame.

Ordering Information
Note: Shown with unconfined compression test digital readout set; not included,
order separately.

ASTM D-2166; AASHTO T-208.


Lightweight design for laboratory and field use.
Supplied complete and ready to operate.
The unconfined compression test is an important method of determining shear
strength of cohesive and semi-cohesive soils.The test is widely used to supply
information needed for the design and construction of civil engineering structures
of many kinds, such as buildings, bridges, dams, and embankments.
Test loads are applied to the specimen through a gearing arrangement located in
the totally enclosed base.The gear train is actuated by a two-piece aluminum hand
crank.The rate of strain can be regulated during the test by turning the hand crank
at the desired rate. Loads are indicated on a proving ring and dial indicator assembly. Readings on the dial are converted to the load applied to the specimen by
using the calibration charts supplied with each unit.

Specifications

EI25-3525/02. 110-220vAC, 50/60 Hz, 1.


EI25-3525/01. 220-240vAC, 50/60 Hz, 1.

Specimen Height.
Platens.

Accessories

Proving Ring.

EI25-3997.
EI25-3998.
EI27-1121/02.

EI27-1121/01.

EI27-1122/02.

EI27-1122/01.

Unconfined Compression Test Accessory Set, English. Includes:


platens, 1.0" range dial indicator and 500 lb. capacity proving ring.
Unconfined Compression Test Accessory Set, Metric. Includes:
platens, 25 mm range dial indicator and 2.2 kN capacity
proving ring.
Unconfined Compression Test Digital Readout Set, English.
110vAC, 50/60 Hz,1. Includes: 2-channel digital readout,
500 lb. capacity S-type load cell, axial strain transducer with
2" range, platens and mounting hardware.
Unconfined Compression Test Digital Readout Set, English.
220vAC, 50/60 Hz,1. Includes: 2-channel digital readout,
500 lb. capacity S-type load cell, axial strain transducer with
2" range, platens and mounting hardware.
Unconfined Compression Test Digital Readout Set, Metric.
110vAC, 50/60 Hz, 1. Includes: 2-channel digital readout,
2.2 kN capacity S-type load cell, axial strain transducer with
50 mm range, platens and mounting hardware.
Unconfined Compression Test Digital Readout Set, Metric.
220vAC, 50/60 Hz,1. Includes: 2-channel digital readout,
2.2 kN capacity S-type load cell, axial strain transducer with
50 mm range, platens and mounting hardware.

Special Note:
See Triaxial and CBR sections of the catalog for the respective test accessories used
with the Versa-LoaderTM.

Up to 8" (203 mm).


3" (76 mm) diam.; with concentric grooves for centering
specimen.
Plated steel; complete with dial indicator and calibration charts
in English and Metric units.
English: 1.0" range x 0.001" graduations.
Metric: 25 mm range x 0.01 mm graduations.
Two-piece; aluminum.
One-piece; cast aluminum.
High-strength aluminum.
10-5/8" w. x 6-3/8" d. x 26-1/4" h. (270 x 162 x 667 mm).
Net 43 lbs. (19.5 kg).; Shpg. 58 lbs. (26.3 kg).

Strain Indicator.
Hand Crank.
Base.
Crosshead.
Dimensions.
Weight.

Ordering Information
EI25-3604.
EI25-3605.

1,500 lb. load capacity.


6.6 kN load capacity.

Unconfined Compression Test Set


Ordering Information
Set Includes: 1
1
1
1
EI2435.

Unconfined Compression Tester (25-3604).


Compaction Straightedge (24-9010).
Digital Stopwatch (88-4340).
Vernier Calipers (88-8050).

English

30

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
C O M PAC T I O N
Specifications
Hammer.

Circular faced, 2.0" (50.8 mm) diam. foot; adjustable to either


5.5 lb.(2.5 kg) or 10 lb. (4.5 kg) weight.
Adjustable to either 12" (305 mm) or 18" (457 mm).
Digital counter system, selector switch for either standard
proctor test or modified proctor/CBR testing.
10" w. x 17" d. x 55" h. (250 x 430 x 1,400 mm).
Net 419 lbs. (190 kg).

Drop.
Controls.
Dimensions.
Weight.

Ordering Information
Note: Compaction molds not included; order separately.
EI24-9095/02. 110-120vAC, 50/60 Hz, 1.
EI24-9095/01. 220-240vAC, 50/60 Hz, 1.

Accessories
EI24-9097.
Standard Compaction Mold. 1/30 cu.ft.; 4" i.d. x 4.584" h.
EI24-9098.
Modified Compaction Mold. 1/13.33 cu.ft.; 6" i.d. x 4.584" h.
EI24-9095/12. Calibration Kit.

Replacement Parts
EI24-9095/13. Lead Cylinders for EI24-9095/12. Pack of 100.

Basic Laboratory Compaction Set,


Motorized
ASTM D-698, D-1557; AASHTO T-99, T-180.
Ordering Information
Set Includes: 1
1
1
1
1
1
1
1
1
3
1
1
EI2310/02.
EI2310/01.

Automatic Soil Compactor

Automatic Soil Compactor (24-9095/0x).


Standard Compaction Mold (24-9097).
Modified Compaction Mold (24-9098).
Straightedge (24-9010).
Mixing Trowel (88-7400).
Mixing Spoon (88-7700).
Spatula (88-7500).
Trimming Knife (88-7910).
Sample Ejector (23-4085).
Mixing Pans (88-7190).
Doz. Moisture Cans (88-7022A).
Wash Bottle (88-6612).

110-120vAC, 50/60 Hz, 1.


220-240vAC, 50/60 Hz, 1.

ASTM D-558, D-559, D-560, D-698, D-1557;


AASHTO T-99, T-134, T-135, T-136, T-180.

Basic Laboratory Compaction Set,


Hand-Operated

Pre-set blow pattern ensures even compaction.


Solid state controls for reliability and ease of maintenance.
Automatic counter reset after completion of blow pattern.

Ordering Information

The time and effort required to prepare specimens for compaction studies and
other test methods can often be costly and time consuming.The ELE Compactor
automatically compacts soil specimens, thereby eliminating the laborious hand
compaction method.The height and weight of the hammer is adjustable to suit
test requirements.
An automatic blow pattern ensures optimum compaction for each layer of soil.
The hammer itself travels across the mold and the table rotates the mold in equal
steps on a base that is extremely stable.The number of blows per layer can be set
at the beginning of the test by means of the simple digital counter system.

ASTM D-698, D-1557; AASHTO T-99, T-180.

Set Includes: 1
1
1
1
1
1
1
1
1
1
1
3
1
1

Standard Compaction Mold (24-9061).


Modified Compaction Mold (24-9067).
Standard Compaction Hammer (24-9063).
Modified Compaction Hammer (24-9070).
Straightedge (24-9010).
Mixing Trowel (88-7400).
Mixing Spoon (88-7700).
Spatula (88-7500).
Trimming Knife (88-7910).
Sample Ejector (23-4085).
Mixing Pan (88-7150).
Mixing Pans (88-7190).
Doz. Moisture Cans (88-7022A).
Wash Bottle (88-6612).

EI2300.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

31

Soil
C O M PAC T I O N
Standard Compaction Mold
ASTM D-558, D-559, D-560, D-698, D-1557;
AASHTO T-99, T-134, T-135, T-136, T-180.
The Standard Compaction Mold consists of the 1/30 cu. ft. cylinder mold, collar,
base plate and studs complete with wing nuts.The base plate is slightly recessed
to receive the cylinder mold.

Specifications
Mold Volume.
Dimensions.
Base Plate.
Weight.

1/30 cu. ft.


4" i.d. x 4.584" h. (101.6 x 116.4 mm).
6" x 6" x 1/2" thick (152 x 152 x 13 mm).
Net 12 lbs. (5.4 kg).

Ordering Information
EI24-9061.

Split Compaction Mold


Standard Compaction Hammer
ASTM D-558, D-559, D-560, D-698;
AASHTO T-99, T-134, T-135, T-136.
The 12" drop of the 5.5 pound Standard Compaction Hammer is controlled in a
tubular guide sleeve which is machined from tubing with an integrally spun end
cap.This manufacturing technique eliminates the possibility of the cap being
knocked out when accidentally struck by an upward blow during the compaction
process.

Specifications
Hammer.
Drop.
Guide Sleeve.
Weight.

2" diam. (50.8 mm); 5-1/2 lbs. (2.49 kg).


12" (305 mm).
Machined steel tubing with integrally spun end cap; air pressure
release holes.
Net 9 lbs. (4.1 kg).

ASTM D-558, D-559, D-560, D-698, D-1557;


AASHTO T-99, T-134, T-135, T-136, T-180.
The Split Compaction Mold is similar in all details to model EI24-9061, except
that it is split longitudinally with special clamps.This feature permits the specimen
to be easily removed at the end of the compaction process.

Specifications
Mold Volume.
Mold Dimensions.
BasePlate.
Weight.

1/30 cu. ft.


4" i.d. x 4.584" h. (101.6 x 116.4 mm).
6" x 6" x 1/2" thick (152 x 152 x 13 mm).
Net 13 lbs. (5.9 kg).

Ordering Information
EI24-9062.

Modified Compaction Mold

Ordering Information
EI24-9063.

ASTM D-698, D-1557; AASHTO T-99, T-180.

Modified Compaction Hammer

The Modified Compaction Mold is used in performing the ASTM test for
Moisture-Density Relations of Soils.The mold is supplied with a collar and base
plate.

ASTM D-1557; AASHTO T-180.


The Modified Compaction Hammer is designed to drop a 10 pound weight a
distance of 18 inches.

Specifications
Hammer.
Drop.
Guide Sleeve.
Weight.

2" diam. (50.8 mm); 10 lbs. (4.5 kg).


18" (457 mm).
Machined steel tubing with integrally spun end cap;
air pressure release holes.
Net 14 lbs. (6.3 kg).

Specifications
Mold Volume.
Mold Dimensions.
Base Plate.
Weight.

1/13.33 cu. ft.


6" i.d. x 4.584" h. (152.4 x 116.4 mm).
8" x 8" (203 x 203 mm).
Net 18 lbs. (8.2 kg).

Ordering Information
EI24-9067.

Straightedge

Ordering Information

ASTM D-698, D-1557; AASHTO T-99.

EI24-9070.

The Straightedge is used for trimming a compacted specimen level with the top of
the mold. It is manufactured from hardened steel and has one beveled edge.

Specifications
Construction.
Dimensions.
Weight.

Flat ground tool steel; beveled edge.


12" l. x 1-1/4" w. x 1/8" thick (305 x 32 x 3 mm).
Net 9 oz. (255 g).

Ordering Information
EI24-9010.

32

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
C O M PAC T I O N
Sample Ejector
Fast sample extrusion from molds and sampling tubes up to
7" (178 mm) long.
6,000 lbf. (26.7 kN) hand-operated hydraulic jack.
Bench top design for use in both the laboratory and the field.
All metal construction treated for rust resistance and long life.
Fast extrusion and ejection of soil samples from molds and short lengths of
sample tubing are accomplished by the ELE Sample Ejector. Designed in a heavy
duty bench style, the ejector has a pushing force of 6,000 lbf. (26.7 kN) which is
developed through a hand operated hydraulic jack.
The unit is supplied complete with accessories for ejecting samples from
2" (50.8 mm) and 3" (76.2 mm) shelby tubes, 4" (101.6 mm) or 6" (152.4 mm)
molds, up to 7" (178 mm) long.

Specifications
Capacity.

2" (50.8 mm) and 3" (76.2 mm) shelby tubes up to 7" l.
(178 mm);4" (101.6 mm) and 6" (152.4 mm) molds.
6,000 lbf. (26.7 kN).
Hydraulic; hand-operated; 7" (178 mm) stroke.
All metal; plated extrusion plates and piston discs; painted finish
on housing and pump.
10-1/2" w. x 8" d. x 22-1/2" h. (267 x 203 x 571 mm).
Net 64 lbs. (29 kg); Shpg. 75 lbs. (34 kg).

Pushing Force.
Jack.
Construction.
Dimensions.
Weight.

Ordering Information
EI23-4085.

Accessories
EI23-4085/10.

Ejector Head and Plate for 2.416" i.d. tubes.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

33

Soil
CBR
Laboratory CBR Set, Motorized
ASTM D-1883; AASHTO T-193.
The Laboratory CBR Set consists of the equipment required to perform CBR
testing in accordance with ASTM and AASHTO specifications.

Ordering Information
Set Includes: 1
1
4
1
4
1
2
1
1
4
4
1
1
1
EI2430/02.
EI2430/01.
EI2431/02.
EI2431/01.

Versa-LoaderTM
ASTM D-1883; AASHTO T-193.
10,000 lbf. (45 kN) maximum load capacity.
Accurate loading speeds from 0.08" (2.032 mm) to as low as
0.001" (0.025 mm) per minute.
Push-button Up-Down-Stop operation with overtravel limit
switch protection.
Highly versatile can be used for Quick Undrained Triaxial,
Unconfined Compression and CBR testing with proper
accessories.
Please refer to page 11 for complete specifications on the Versa-LoaderTM series
load frame.

Ordering Information
Note: Shown with CBR test digital readout set; not included, order separately.
EI25-3525/02. 110vAC, 50/60 Hz, 1.
EI25-3525/01. 220vAC, 50/60 Hz, 1.

Accessories
EI24-9175.
EI24-9177.
EI27-1124/02.

EI27-1124/01.

EI27-1125/02.

EI27-1125/01.

CBR Test Accessory Set, English. Includes: lower platen,


penetration piston assembly, dial indicator with 1.0" range,
10,000 lb. capacity proving ring and mounting hardware.
CBR Test Accessory Set, Metric. Includes: lower platen,
penetration piston assembly, dial indicator with 25 mm range,
45 kN capacity proving ring and mounting hardware.
CBR Test Digital Readout Set, English. 110vAC, 50/60 Hz, 1.
Includes: 2-channel digital readout, 10,000 lb. capacity S-type load
cell, penetration transducer with 2" range, penetration piston and
mounting hardware.
CBR Test Digital Readout Set, English. 220vAC, 50/60 Hz, 1.
Includes: 2-channel digital readout, 10,000 lb. capacity S-type load
cell, penetration transducer with 2" range, penetration piston
and mounting hardware.
CBR Test Digital Readout Set, Metric. 110vAC, 50/60 Hz, 1.
Includes: 2-channel digital readout, 45 kN capacity S-type load
cell, penetration transducer with 50 mm range, penetration
piston and mounting hardware.
CBR Test Digital Readout Set, Metric. 220vAC, 50/60 Hz, 1.
Includes: 2-channel digital readout, 45 kN capacity S-type load
cell, penetration transducer with 50 mm range, penetration
piston and mounting hardware.

Versa-Loader (25-3525/0x).
CBR Accessory Set (24-9175 or 24-9177).
CBR Molds (24-9229).
Spacer Disc (24-9238).
Filter Screens (24-9240).
Box, Filter Paper (24-9250).
Swell Plates (24-9260).
Tripod Attachment (24-9262).
Dial Indicator (88-4100).
Surcharge Weights (24-9245).
Slotted Surcharge Weights (24-9244).
Compaction Hammer (24-9063).
Straightedge (24-9010).
Cutting Edge (24-9236).

110vAC, 50/60 Hz, 1. English.


220vAC, 50/60 Hz, 1. English.
110vAC, 50/60 Hz, 1. Metric.
220vAC, 50/60 Hz, 1. Metric.

DataSystem Laboratory CBR Set


ASTM D-1883; AASHTO T-193.
The Laboratory CBR Set consists of the equipment required to perform CBR
testing in accordance with ASTM and AASHTO specifications including options for
automated data logging, analysis and reporting.

Ordering Information
Set Includes: 1
1
1
1
1
4
1
4
1
2
1
1
4
4
1
1
1
EI2432/02.
EI2432/01.

Versa-Loader (25-3525/0x).
ADU 8 Channel Data Acquisition Unit (27-1495/0x).
CBR Penetration Program (27-1795).
S-Type Load Cell, 10,000 lb. (44.4 kN) cap. (27-1587).
CBR Displacement Transducer (27-1706).
CBR Molds (24-9229).
Spacer Disc (24-9238).
Filter Screens (24-9240).
Box, Filter Paper (24-9250).
Swell Plates (24-9260).
Tripod Attachment (24-9262).
Dial Indicator (88-4100).
Surcharge Weights (24-9245).
Slotted Surcharge Weights (24-9244).
Compaction Hammer (24-9063).
Straightedge (24-9010).
Cutting Edge (24-9236).

110vAC, 50/60 Hz, 1.


220vAC, 50/60 Hz, 1.

Note: Computer hardware and peripherals required for system operation; not
included. Contact factory for system requirements.
Special Note:
See Data Acquisition section for specifications of electronic displacement and logging
equipment.

Special Note:
See Triaxial and Unconfined Compression sections of catalog for the respective test
accessories used with the Versa-LoaderTM.

34

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
CBR

CBR-Test 50 Machine
ASTM D-1883; AASHTO T-193.

Two speed machine (ASTM/AASHTO and BS).


Rapid Platen Adjustment.
Complete with penetration piston stabilizer bar.
Compact, bench-top design.

Designed for performing laboratory CBR tests to ASTM, AASHTO and BS


standards, the ELE CBR-Test 50 consists of a twin column frame and a motorized
drive system.Two speeds are provided: 0.5" (1.27 mm) per minute for ASTM and
AASHTO tests and 1.0 mm per minute for BS test applications.
The rapid platen adjustment feature enables the operator to quickly close the
daylight opening and to carefully control the application of a seating load.

CBR Loading Press, Hand Operated

Specifications
Capacity.
Load Speeds.
Horizontal Clearance.
Vertical Clearance.
Platen.
Platen Travel.
Dimensions.
Weight.

11,200 lbf. (50 kN).


Selectable; 0.5" (1.27 mm) or 1.0 mm.
10" (255 mm).
31.5" (800 mm) maximum.
5.24" (133 mm) diam.
4.13" (105 mm).
15.75" w. x 21.65" d. x 48" h. (400 x 550 x 1,220 mm).
Net 106 lbs. (48 kg).

Twin-column frame construction.


10,115 lb. (45 kN) capacity loading jack.
Stabilizer bar supplied as standard.
The CBR Loading Press is used to force the penetration piston into the
compacted CBR specimen.The load is applied through a mechanical type jack.
The gear ratio of the jack was selected to provide a hand wheel speed that can
be comfortably maintained, particularly with soils of a high CBR range.

Ordering Information

The complete assembly consists of the loading frame, mechanical jack, penetration
piston with dial gauge mounting bracket and a stabilizer bar.

Note: Shown with proving ring, penetration piston assembly and penetration dial
indicator; not included, order separately.

Specifications

EI24-9150/02. 110-120vAC, 50/60 Hz, 1.


EI24-9150/01. 220-240vAC, 50/60 Hz, 1.

Accessories
EI24-9179.
EI78-0760.
EI78-0860.
EI88-4100.
EI88-4110.
EI88-4194.

Penetration Piston Assembly.


Proving Ring. 6,000 lb. (28 kN) capacity.
Proving Ring. 11,200 lb. (50 kN) capacity.
Penetration Dial Indicator. 1.0" range x 0.001" divisions.
Penetration Dial Indicator. 25 mm range x 0.01 mm divisions.
Dial Indicator Holder.

Special Note:
See Data Acquisition section for electronic load and penetration measurement options.

Jack.
Frame.
Dimensions.
Weight.

Mechanical; with quick release device for rapid adjustments.


Heavy-duty steel construction with two column uprights.
14.5" w. x 10.25" d. x 46" h. (368 x 260 x 1,168 mm).
Net 145 lbs, (65.7 kg).

Ordering Information
Note: Shown with proving ring, penetration dial indicator and mold; not included,
order separately.
EI24-9345.

Accessories
EI78-0760.
EI78-0860.
EI88-4100.
EI88-4110.

Proving Ring. 6,000 lb. (28 kN) capacity.


Proving Ring. 11,200 lb. (50 kN) capacity.
Penetration Dial Indicator. 1.0" range x 0.001" divisions.
Penetration Dial Indicator. 25 mm range x 0.01 mm divisions.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

35

Soil
CBR
Laboratory CBR Set, Hand-Operated
The hand-operated Laboratory CBR Set consists of a basic selection of items to
perform CBR testing, where electrical power is not available.

Ordering Information
Set Includes: 1
1
1
4
1
4
1
2
1
1
4
4
1
1
1
EI2420.
EI2421.

CBR Loading Press (24-9345).


Proving Ring, 11,200 lb. (50kN) (78-0860).
Penetration Dial Indicator (88-4100).
CBR Molds (24-9229).
Spacer Disc (24-9238).
Filter Screens (24-9240).
Box, Filter Paper (24-9250).
Swell Plates (24-9260).
Tripod Attachment (24-9262).
Dial Indicator (88-4100).
Surcharge Weights (24-9245).
Slotted Surcharge Weights (24-9244).
Compaction Hammer (24-9063).
Straightedge (24-9010).
Cutting Edge (24-9236).

English.
Metric.

Filter Paper
ASTM D-1883; AASHTO T-193.
Specifications
Grade.
Size.
Weight.

Coarse.
15 cm diam. (5.9").
Net 8 oz. (227 g).

Ordering Information
EI24-9250.

Box of 100.

Filter Screen
The Filter Screen is used by some laboratories as an alternative to our
standard Filter Paper.The screen consists of a number 100 brass mesh cut
to 5-15/16" (135 mm) in diameter.

Specifications
Mesh.
Size.
Weight.

Brass; number 100.


5-15/16" diam. (135 mm).
Net 1 oz. (28 g).

Ordering Information

Field CBR Set


ASTM D-4429.

EI24-9240.

The Field CBR Set consists of the equipment required to perform CBR testing
in accordance with ASTM and AASHTO specifications.

Spacer Discs

Ordering Information
Set Includes: 1
1
1
1
1
1
1
1
1
1
1
1
EI2400.
EI2401.

Specifications

Field CBR Jack (24-9290).


Ball Seating Attachment (24-9300).
Proving Ring, 2,250 lb. (10 kN) cap. (78-0460).
Proving Ring, 6,000 lb. (28 kN) cap. (78-0760).
Field Penetration Piston (24-9183).
Extension Rod (24-9308).
Bracket and Adapter (24-9188).
Bridge Support (24-9312).
Penetration Dial Indicator (88-4100 or 88-4110).
Circular 10 lb. (4.54 kg) Surcharge Weight (24-9247).
Slotted 10 lb. (4.54 kg) Surcharge Weight (24-9246).
Slotted 20 lb. (9.07 kg) Surcharge Weight (24-9248).

English.
Metric.

Construction.
Finish.
Weights.

Steel; machined on all sides.


Plated.
EI24-9237: Net 15 lbs. (6.8 kg).
EI24-9238: Net 16 lbs. (7.3 kg).

Ordering Information
EI24-9237.
EI24-9238.

5-7/8" diam. x 2" h. (47.6 x 50.8 mm).


5-15/16" diam. x 2.416" h. (150.8 x 61.3 mm).

Surcharge Weights
Specifications
Construction.
Finish.

Machined steel.
Plated.

Ordering Information
EI24-9244.
EI24-9245.
EI24-9246.
EI24-9247.
EI24-9248.

5 lb. (2.27 kg) Slotted. 5-7/8" o.d. x 2-1/16" slot


(149.2 x 52.4 mm).
5 lb. (2.27 kg) Circular. 5-7/8" o.d. x 2-1/16" slot
(149.2 x 52.4 mm).
10 lb. (4.54 kg) Slotted. 8-1/2" o.d. (216 mm).
10 lb. (4.54 kg) Circular. 10" o.d. (254 mm).
20 lb. (9.07 kg) Slotted. 8-1/2" o.d. (216 mm).

36

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
CBR

CBR Mold

Swell Plate

ASTM D-1883; AASHTO T-193.

ASTM D-1883; AASHTO T-193.

The CBR Mold has an internal diameter of 6" (152.4 mm) and is 7" (177.8 mm)
in height. It is supplied complete with a perforated type base plate and extension
collar.The base plate and collar fit both ends of the mold and consequently can be
clamped on either end.

Specifications
Mold.
Collar.
Base Plate.
Construction.
Weight.

6" i.d. x 7" h. (152.4 x 177.8 mm).


2" h. (50.8 mm); fits both ends of mold.
Perforated; fits both ends of mold.
All steel; plated.
Net 20 lbs. (9 kg).

Specifications
Base Plate.
Contact Head.
Construction.
Weight.

5-7/8" diam. (149.2 mm); perforated.


Adjustable; locks on stem with knurled nut.
All brass.
Net 2-1/2 lbs. (1.1 kg).

Ordering Information
EI24-9260.

Tripod Attachment
ASTM D-1883; AASHTO T-193.

Ordering Information
EI24-9229.

Specifications

Cutting Edge
Machined from seamless steel tubing, the Cutting Edge has an inside diameter of
6" (152.4 mm) and is approximately 1-1/2" (38 mm) high. A recess in the upper
section makes it possible to mount the Cutting Edge at either end of the CBR
Mold to facilitate the taking of undisturbed samples in the field.

Construction.
Clamp.
Extension Point.
Weight.

Machined, one-piece cast aluminum.


Integral part of assembly; holds dial indicator.
2" l. (50.8 mm) included.
Net 1 lb. (0.4 kg).

Ordering Information
Note: Requires dial indicator; not included, order separately.

Specifications
Dimensions.
Construction.
Finish.
Weight.

EI24-9262.
6" i.d. x 1-1/2" h. (152.4 x 38 mm).
Machined seamless steel tubing; recessed for mounting on
CBR Mold.
Plated.
Net 1-1/2 lbs. (0.7 kg).

Accessories
EI88-4100.
EI88-4110.

Dial Indicator. 1.0" range x 0.001" divisions.


Dial Indicator. 25 mm range x 0.01 mm divisions.

Ordering Information
EI24-9236.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

37

Soil
DENSITY
0.1 Cu. Ft. Relative Density Mold Set
ASTM D-4253, D-4254.
Lightweight aluminum mold construction with carrying
handles.
Detachable guide sleeve assembly.
Includes surcharge weight and base plate assembly.
Specifications
Mold.

Guide Sleeve.
Surcharge Weight.
Surcharge Base Plate.
Weight.

Aluminum; 0.1 cu. ft. (2,830 cu. cm);


6" i.d. x 6.112" inside ht. x 3/8" thick walls
(152.4 x 155.2 x 9.5 mm); with handles and mounting brackets
for dial indicator.
For surcharge weight; removable; with clamp assembly.
56.5 lbs. (25 kg) including surcharge base plate;
5-15/16" diam. x 9" h. (150.8 x 228.6 mm); with handle.
5-15/16" diam. x 1/2" thick (150.8 x 2.7 mm);
with alignment pins and removable handle.
Net 90 lbs. (41 kg).

Ordering Information
EI24-9114.

0.5 Cu. Ft. Relative Density Mold Set


ASTM D-4253, D-4254.
Lightweight aluminum mold construction with carrying
handles.
Detachable guide sleeve assembly.
Includes surcharge weight and base plate assembly.

Relative Density Set


ASTM D-4253, D-4254.
Ordering Information
Set includes: 1
1
1
1
EI2500/06.
EI2500/01.

Vibrating Table (24-9112/0x).


0.1 cu. ft. Relative Density Mold Set (24-9114).
0.5 cu. ft. Relative Density Mold Set (24-9116).
Relative Density Gauge Set (24-9118).

220vAC, 60Hz, 1.
220vAC, 50Hz, 1.

Surcharge Base Plate.

ASTM D-4253, D-4254.

Weight.

Cushioned steel vibrating deck.


Semi-noiseless electromagnetic vibrator.
3600 vpm operating frequency.
Separate controller to vary vibrator amplitude.

Actuator.
Frequency.
Table Capacity.
Double Amplitude
Range.
Dimensions.
Weight.

Aluminum; 0.5 cu. ft. (14,200 cu. cm); 11" i.d. x 9.092" inside ht.
by 3/8" thick walls (279.4 x 230.9 x 9.5 mm); with handles and
mounting brackets for dial indicator.
For surcharge weight; removable; with clamp assembly.
190 lbs. (86.2 kg) including surcharge base plate;
10-7/8" diam. x 6" h.(276.2 x 152.4 mm); with handle.
10-7/8" diam. x 1/2" thick (276.2 x 12.7 mm);
with alignment pins and removable handle.
Net 245 lbs. (111 kg).

Ordering Information
EI24-9116.

Relative Density Gauge Set


ASTM D-4253, D-4254.

Specifications
Table.

Mold.

Guide Sleeve.
Surcharge Weight.

Vibrating Tables

Specifications

Steel construction; 30" x 30"


(762 x 762 mm) cushioned steel deck.
Electromagnetic vibrator; semi-noiseless;
over 100 lb. (45.3 kg) net wt.
3,600 vpm; variable amplitude separately controlled.
750 lbs. (340 kg).
EI24-9112/06: 0.002" to 0.015" (0.05 to 0.38 mm).
EI24-9112/01: 0.002" to 0.019" (0.05 to 0.48 mm).
30" w. x 30" d. x 21" h. (762 x 762 x 533 mm).
Net 555 lbs. (252 kg); Shpg. 605 lbs. (274 kg).

Ordering Information

Includes plated metal calibration bar.


Can be used on both 0.1 cu. ft. and 0.5 cu. ft. Relative
Density Mold Sets.
Specifications
Dial Indicator.
Dial Holder.
Calibration Bar.
Weight.

2.0" range x 0.001" divisions.


Machined steel; plated.
Plated steel; 3" w. x 12" l. x 1/8" thick (76 x 305 x 3.2 mm).
Net 7 lbs. (3.2 kg).

Ordering Information

EI24-9112/06. 220vAC, 60Hz, 1.


EI24-9112/01. 220vAC, 50Hz, 1.

EI24-9118.

Includes Dial Indicator Holder and Calibration Bar.

38

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
DENSITY

Volumeasure

ASTM D-2167; AASHTO T-205.


Protective aluminum guard with carrying handle for
convenience at the job site.
Dual-scale cylinders, graduated in both English and
Metric units.
1/20 cu. ft. (1,596 ml) capacity.

The Volumeasure is a direct reading instrument used to determine the in-place


density of compacted or firmly bonded soils and construction fill materials.The
device is easily operated and requires no calibration after leaving the factory.
The graduated cylinders used in the Volumeasure are calibrated for volume with
graduations permanently marked on the cylinder walls. Incorporating the liquid
filled balloon principle, the Volumeasure consists of a graduated cylinder,
aluminum guard, base, pressure-vacuum actuator bulb, rubber balloons and a
field density plate.

Specifications
Graduated Cylinder.
Balloons.
Guard.
Guard Base.

Heavy-duty plastic; dual graduated.


Resilient latex.
Aluminum with integral carrying handle.
Aluminum; with fittings, outlets, valves and vent tube for balloon
and actuator bulb.
Double acting type for pressure or vacuum;
fitted with adapter, quick coupler and valve assembly.
Aluminum with flanged sides;
9" x 9" x 3/4" h. (229 x 229 x 19 mm).
Water.
Net 12 lbs. (5.4 kg).

Actuator Bulb.
Density Plate.
Operating Liquid.
Weight.

Sand Density Cone, 12" (305 mm)


Can be used to determine the in-place density of gravel
and coarse-grained soils.
Clear plastic top for easy visibility of sand level.
Convenient jar handles for carrying apparatus to the field.
With the 12" (305 mm) Sand Density Cone, it is possible to use the sand method
to determine the in-place density of gravel and coarse-grained soils.The flange
which fits on the lower cone permits use of the apparatus on holes up to 12"
(305 mm) in diameter. Joining the upper and lower cones is a special valve assembly.The metal jar has carrying handles and a clear plastic top.The unit follows U.S.
Army Corps of Engineers specifications.

Specifications
Lower Cone.
Sand Jar.
Finish.
Weight.

Flanged; 12" (305 mm) opening.


Metal; clear plastic top; with handles.
Painted.
Net 42 lbs. (19 kg).

Ordering Information
EI29-4350.

Includes circular base plate.

Accessories
EI29-4355.

Density Sand. 50 lb. (22.7 kg) bag.

Ordering Information
EI29-4522.

1/20 cu. ft. (1,596 ml) capacity.

Accessories
EI29-4524.

Volumeasure Pressure Gauge. For use in controlling the


applied pressure during calibration and testing procedures.

Replacement Parts
EI29-4522/10. Balloons. Pkg. of 12.
EI29-4522/11. Graduated Cylinder and Gasket Set. 1/20 cu. ft.
(1,596 ml) capacity.
EI29-4522/13. Actuator Bulb Assembly.
Special Note:
Optional Volumeasure Pressure Gauge is recommended for testing in accordance with
ASTM and AASHTO standards.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

39

Soil
DENSITY
Field Density Plates
ASTM D-1556; AASHTO T-191.
Used in conjunction with the Sand Density Cone, the Field Density Plate
facilitates the removal of soil from the density hole. In preparing the density hole,
the center opening of the plate can be used as a template to control the
diameter of the hole.The plate itself is used as a shelf to prevent the loss of soil
during the removal operation.

Specifications
Construction.
Weights.

Aluminum Alloy.
EI29-4294: Net 2 lbs. (0.9 kg).
EI29-4342: Net 2-1/2 lbs. (1.1 kg).

Ordering Information
EI29-4294.
EI29-4342.

Density Sand

Sand Density Cones

ASTM D-1556; AASHTO T-191.

ASTM D-1556; AASHTO T-191.


Corrosion-resistant brass valve assembly.
Spun metal upper and lower cones.
Durable plastic sand jug reduces the chance of possible
breakage in the field.
The Sand Density Cone provides a practical method of determining the
in-place density of soil and related materials in base coarses, roadways, dams,
embankments, levees and similar construction.The equipment consists of a
double cone assembly and a one gallon (4,000 cu. cm) capacity sand jug.

Specifications
Threads into sand jug.
EI29-4292: Flanged to 4-1/2" (114 mm) diam.
EI29-4302: Flanged to 6-1/2" (165 mm) diam.
Brass construction; controls sand flow into density hole.
Plastic; 1 gal. (4,000 cu. cm) capacity.
EI29-4292: Net 2 lbs. (0.9 kg).
EI29-4302: Net 3 lbs. (1.4 kg).

Valve.
Sand Jug.
Weight.

Ordering Information
Note: Shown with field density plate; not included, order seperately.
4" (102 mm) Sand Density Cone.
6" (152 mm) Sand Density Cone.

Accessories
EI29-4294.
EI29-4342.
EI29-4355.

Specifications
Density.
Particle Size.

Approx. 93 lbs./cu. ft. (1.49 g/cu. cm).


Maximum size less than 2 mm (no. 10 sieve), and less than 3%
by weight passing 250 m (no. 60 sieve).
Net 50 lbs. (22.7 kg).

Weight.

Ordering Information
EI29-4355.

6 (152 mm) Sand Cone Density Set

Top Cone.
Bottom Cone.

EI29-4292.
EI29-4302.

4-1/2" (114 mm) opening, counter-bored;


9" x 9" x 3/4" h. (229 x 229 x 19 mm).
For use with model EI29-4292 Sand Density Cone.
6-1/2" (165 mm) opening, flanged;
12" x 12" x 5/8" h. (305 x 305 x 15.9 mm).
For use with model EI29-4302 Sand Density Cone.

4" (102 mm) Field Density Plate.


6" (152 mm) Field Density Plate.
Density Sand. 50 lb. (22.7 kg) bag.

Replacement Parts

ASTM D-1556; AASHTO T-191.


The EI2600 series test set includes the equipment necessary to perform
density testing in the field, using the Sand Cone method.

Ordering Information
Set includes: 1
1
1
2
1
1
1
1
12
1
EI2600.
EI2601.

Sand Density Cone (29-4302).


Replacement Sand Jug (29-4292/10).
Field Density Plate (29-4342).
Bags, Density Sand (29-4355).
Spoon (88-7700).
Steel Chisel (88-7960).
Rubber Mallet (88-7940).
Scoop (88-7300).
Field Cans (88-7042).
Field Scale (88-1600 or 88-1610).

English.
Metric.

Special Note:
Drying oven required for density testing; not included, order separately.

EI29-4292/10. Plastic Sand Jug.

40

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
DENSITY
Specifications
Auger Head.
Tee Handle.
Extensions.
Slide Hammer.
Hammer Extensions.
Penetrometer Cone.
Weight.

3-1/4" (82.6 mm) bucket diam. 4" (102 mm) blade diam.
3/4" (19 mm) diam. rod; 36" (914 mm) long.
Four 36" (914 mm) hand auger extensions.
15 lb. circular disc with 20" (508 mm) free fall.
Four 30" (762 mm) E Drill rods.
30.
Net 78 lbs. (35.4 kg).

Ordering Information
Note: Model EI29-5500 Portable Dynamic Cone/Auger Set Shown.
EI29-5500.

EI29-5505.

Portable Dynamic Cone Penetrometer/Auger Set. Consists of


a sliding drive hammer assembly, cone penetrometer point
attached to a 12" (305 mm) rod, four 30" (762 mm) "E" drill rod
extensions, one 3-1/4" (82.6 mm) hand auger head, tee handle
for hand auger, four 36" (914 mm) auger extensions and ASTM
Special Technical Publication #399.
Portable Dynamic Cone Penetrometer. Consists of sliding drive
hammer assembly, cone penetrometer point attached to a 12"
(305 mm) rod, four 30" (762 mm) "E" drill rod extensions.

Accessories
EI29-5510.

Portable Dynamic Cone


Penetrometer/Auger Set
Handle and extensions of auger are lightweight tubing for
portability.
Steel constructed auger bucket and blades for abrasion
resistance.
4" (102 mm) hole diameter hand auger head for easy
dropping of cuttings.
Depth of 20' (6.1 m) possible with 36" (914 mm) auger
extensions.
Quick connect couplings with pins for easy connection of
extensions.
Sliding drive hammer consists of 15 pound hammer designed
for 20" (508 mm) free fall.
Cone penetrometer point is attached to a 12" (305 mm)
long rod.
Four 30" (762 mm) E drill rods for extension between cone
and sliding drive hammer.
ASTM Special Technical Publication #399 included.

3" (76.2 mm) Drive Tube Assembly. Consists of a drive head,


3" (76.2 mm) diam. x 10" (254 mm) long sample tube and
plastic end cap.
EI29-5510/10. Sample Tube. 3" (76.2 mm) diam. x 10" (254 mm) long.
EI29-5510/11. Plastic End Cap. For 3" Sample Tube.

Replacement Parts
EI29-5500/10.
EI29-5500/11.
EI29-5500/12.
EI23-1400/10.
EI23-1400/11.
EI23-1400/12.
EI23-1400/13.

Sliding Drive Hammer Assembly.


Cone Penetrometer Point with 12" (305 mm) rod.
30" (762 mm) long "E" Drill Rod Extensions.
3-1/4" ELE Auger Head with Connector Pin.
Tee Handle with Connector Pin.
Auger Extension with Connector Pin. 36" (914 mm) long.
Connector Pin.

The Portable Dynamic Penetrometer Set is designed to perform penetration


testing for evaluation of soil consistency and density. It is ideal for field exploration
and for verifying individual footing foundations during construction.The set
comprises a hand auger assembly for advancing holes and the dynamic cone
penetrometer for shallow in-situ testing.
The auger features a blade diameter of 4" (102 mm) which exceeds the bucket
diameter of 3-1/4" (82.6 mm), easily allowing auger cuttings to shake free of the
bucket. Both the bucket and blades are constructed of steel for abrasion resistance. Lightweight tubing for the cross handle and extensions to hand auger, up
to 20' (508 mm), make the auger assembly easy to carry.
Originally developed in 1959, the dynamic cone penetrometer consists of a sliding
drive hammer designed to fall freely for 20 inches, causing the cone to penetrate
the soil.The blows of the hammer are counted and recorded for correlation to
standard penetration (STP) values with curves supplied in the ASTM Special
Technical Publication #399.

EI29-5510. Drive Tube Assembly.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

41

Soil
DENSITY

Probe Rod

Locates soft zones of soil in compacted areas.


Easy to use.
Lightweight.
Durable.

Designed for on-site conditions, the Probe Rod meets the need for a simple
device to locate soft zones of soil in and under compacted areas in sub-grades
or footing excavations.
The T-shaped design and conical tip make this hand tool easy to use. It is lightweight for convenient transport and plated for durability.

Specifications
Handle.
Probe Shaft.
Diameter.
Weight.

Density Drive Samplers


ASTM D-2937

8" (203 mm).


36" (914 mm).
1/2" (12.7 mm).
Net: 3 lb. (1.36 kg).

Ordering Information

Designed to determine in-place density of soil, the Density Drive Sampler and
Tubes are used to obtain a relatively undisturbed soil sample. Made of plated steel,
the sampler consists of a rod, handle and anvil hammer with a shock spring to
drive the thin-walled tube into the soil.The sharp edges of the tubes are designed
for clean and easy cutting into the soil.

EI29-5460.

Specifications
EI29-5450: 3" (76.2 mm) diam.
EI29-5455: 4" (101.6 mm) diam.
Plated steel construction with internal shock spring.
EI29-5450/10: 3" (76.2 mm) diam. x 2.75" (69.8 mm) l.
EI29-5455/10: 4" (101.6 mm) diam. x 5" (127 mm) l.
EI29-5450: Net 22 lbs. (9.9 kg).
EI29-5455: Net 23 lbs. (10.4 kg).

Drive Head.
Hammer Assembly.
Tube Dimensions.
Weights.

Ordering Information
Note: Density Tubes are not included with Drive Samplers; order separately.
EI29-5450.
EI29-5455.

Density Drive Sampler.With 3" (76.2 mm) drive head.


Density Drive Sampler.With 4" (101.6 mm) drive head.

Accessories
EI29-5450/10. Density Tube. 3" (76.2 mm). 0.01 cu. ft capacity.
EI29-5455/10. Density Tube. 4" (101.6 mm). 0.033 cu. ft capacity.

42

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
MOISTURE

Digital Soil Moisture Meter


Speedy

TM

Moisture Testers

ASTM D-4944; AASHTO T-217.

Reliable and accurate moisture measurement in the field.


Direct-reading in percent moisture.
Rapid results in minutes.
Easy-to-use includes simple step-by-step instructions.

The Speedy 2000 moisture testing kit which combines the most popular and
versatile Speedy model with an electronic balance and a heavy-duty plastic case.
The waterproof and durable case offers the highest level of protection. A foam
insert secures the contents of the kit: the large Speedy body, electronic balance,
beaker, cleaning cloth, cap, washer, scoop, steel pulverizing balls, and cleaning
brushes.The electronic balance has an easy-to-read LCD display.With a range
from 0 - 7oz (0 - 200g), the balance is simple to use, accurate, and repeatable.
The Speedy moisture tester determines the moisture content of a broad range
of materials. A small sample of the material to be tested is weighed on the balance
and then placed in the hand held vessel. A measure of calcium carbide reagent is
then added and the vessel sealed.The reagent reacts with the free moisture in the
sample to produce acetylene gas, resulting in an increase in pressure within the
vessel.The % moisture content of the sample is then read directly from the calibrated pressure gauge.

Capacity.
Gauge.
Accuracy.
Test Speed.
Tester.
Reagent.
Carrying Case.
Balance.

20 g.
Calibrated from 0 - 20% moisture based on wet weight.
Within 0.5% on most materials.
45 sec. to 3 min., depending on material.
Corrosion resistant metal construction.
Calcium carbide type. (Not included.)
Heavy-duty plastic.
Electronic balance (23-7452/12);
200 g capacity x 0.1 g; operates on 9v battery.
Balance, beaker, cleaning cloth, cap,
washer, scoop, steel pulverizing balls and cleaning brushes.
Net 13 lbs. (5.9 kg).

Other Components.
Weights.

Ordering Information
Note: Speedy Moisture Tester Reagent is required for operation; not included,
order separately.
TM

SpeedyTM 2000 Moisture Tester with Plastic Carrying Case and


Electronic Balance. 20 g capacity; 0 - 20% Range.
For use on sand, soils, clay and aggregates.

Accessories
EI23-7702.
EI23-7600.

Large, easy-to-read digital display.


Solid state AC circuitry assures long trouble-free service.
Low battery power indicator.
Rugged plastic case with belt clip for easy portability.

The Digital Soil Moisture Meter is designed to measure the resistance of the soil
block in ohms.The test reading is converted to a corresponding reading between
0 and 100 on an empirical scale and displayed on the meter.This empirical range
covers the soil suction range of 0.2 to 15 bars.The moisture content for different
types of soils corresponding to the meter reading can be determined, using the
calibration graphs provided.

Specifications
Readout.
Power.
Terminals.
Controls.
Case.
Dimensions.
Weight.

LCD; 0 - 100 range; low battery indicator.


One 9v battery (not included).
Knife action spring type.
Set and read buttons; thumb wheel adjustment knob.
Plastic; with belt clip.
3-3/4" w. x 6-1/2" h. x 1-1/2" d. (95 x 165 x 38 mm).
Net 3 lbs. (1.3 kg).

Ordering Information
Note: Shown with Soil Moisture Block; not included, order separately.

Specifications

EI23-7452.

SpeedyTM Moisture Tester Reagent. Carton of 12, 500 g cans.


Meets ASTM D-4944 and AASHTO T-217 specifications.
SpeedyTM Calibration Kit. Includes master gauge, valves, integral
air pump, tools, instruction manual and case.

EI23-7726.

Accessories
EI23-7726/10. Soil Moisture Block.

Soil Moisture Block


Unique flow-through design for fast response.
Precisely dimensioned coaxial electrodes for greater
uniformity of response.
Slim, gypsum block construction.
The Soil Moisture Block incorporates a unique flow-through design which permits
the unrestricted flow of moisture in and out of the block from all directions, to
assure the fastest response time possible.The buffering action of the gypsum
compensates for varying salinity conditions to give reliable moisture content
information.

Specifications
Construction.
Lead Wire.
Weight.

Gypsum; 7/8" (22 mm) diam.; coaxial electrode.


6 ft. (1.8 m) long.
Net 8 oz. (227 g).

Ordering Information
EI23-7726/10.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

43

Soil
G R A I N S I Z E A N A LY S I S

Hydrometer Jar Bath


ASTM D-422; AASHTO T-88.
Automatic high temperature safety cut-off prevents
damage to pumping system.
Stainless steel interior and shelf for rust resistance and
long life.
Pump and support shelf system maintains constant
temperature to comply with testing specifications.
Removable shelf for easy clean-up.
Accurate hydrometer analysis of a soil specimen requires maintaining the
sample in suspension at a constant temperature.The Hydrometer Jar Bath
maintains the sample at 20C 0.2 (68F) by circulating water around the
hydrometer jars.
Up to eight hydrometer jars can be stored at the same time and the Jar Bath
operates at temperatures up to 60C (140F).The automatic high temperature
cut-off prevents damage to the pump system and the stainless steel interior and
jar shelf resist corrosion.

Mechanical Analysis Stirrer


ASTM D-422; AASHTO T-88.
Powerful 3-speed universal motor.
Stainless steel front panel.
Includes Mixing Paddle and Dispersion Cup.
This compact, bench-top stirrer is used for dispensing soil samples in water
for hydrometer analysis in accordance with ASTM and AASHTO standards.
The stirrer is supplied complete with Mixing Paddle and Dispersion Cup.

Specifications
Motor.
Speeds at No Load.

Specifications
Capacity.
Construction.
Jar Support.
Temperature Range.
Sensitivity.
Circulating System.
Heating System.
Plumbing Ports.
Inside Dimensions.
Outside Dimensions.
Weight.

8 hydrometer jars.
Stainless steel tank; enamel finish exterior.
Stainless steel grid.
Ambient to 60C (140F).
0.2C at 20C (68F).
Drive pump with motor.
Immersion type; 700 watt heater in stainless steel
mixing chamber.
Overflow; Drain; Inflow and outflow for cooling system.
37-3/4" w. x 7-3/4" d. x 16-1/2" h. (959 x 197 x 419 mm).
40" w. x 10" d. x 23" h. (1,016 x 254 x 584 mm).
Net 80 lbs. (36 kg).

Ordering Information
EI24-4867/02. 110vAC, 50/60 Hz, 1.
EI24-4867/01. 220vAC, 50/60 Hz, 1.

Housing.
Controls.
Mixing Paddle.
Dispersion Cup.
Dimensions.
Weight.

Universal AC-DC; up to 75 cycles; 3-speed selectable.


Low: 13,000 rpm.
Medium: 16,000 rpm.
High: 18,000 rpm.
Die-cast aluminum; stainless steel front panel;
baked enamel finish.
Rotary speed control switch; on-off switch.
Disc-shaped; nickel-plated steel.
4 stationary baffles, permanently mounted; rounded bottom.
7" w. x 6-1/2" d. x 20" h. (178 x 165 x 508 mm).
Net 15 lbs. (7 kg).

Ordering Information
Note: Includes Mixing Paddle and Dispersion Cup.
EI24-4132/02. 120vAC, 50/60 Hz, 1. 125 Watts.
EI24-4132/01. 220-240vAC, 50/60 Hz, 1. 125 Watts.

Replacement Parts
EI24-4132/10. Soil Dispersion Cup. Net Wt. 1 lb. (454 g).
EI24-4132/11. Mixing Paddle. Net Wt. 1 oz. (28 g).

44

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
G R A I N S I Z E A N A LY S I S
Particle Size Analysis Test Set
ASTM D-422; AASHTO T-88.
The Particle Size Analysis Test Set is a basic set of equipment necessary to perform particle size analysis on soils.

Ordering Information

ASTM Soil Hydrometers


ASTM D-422, E-100; AASHTO T-88.
Molded, seamless construction with bouyoucos double
scale for all-around visibility.
Never needs recalibration.
The series Hydrometer gives consistently accurate readings and eliminates the
error due to variable dilution. Molded, seamless construction ensures uniformity
of volumetric displacement.With no variations between instruments, these
hydrometers never need recalibration.

Specifications
Construction.
Scale.
Calibration.
Weight.

Molded, seamless.
Bouyoucos; double scale.
At 68F.
Net 4 oz. (113 g).

Ordering Information
EI24-4640.
EI24-4650.

-5 to 60 g colloids/liter. ASTM/AASHTO scale 152H.


0.995 to 1.038 specific gravity x 0.001 divisions
ASTM/AASHTO scale 151H.

Sodium Hexametaphosphate
ASTM D-422, E-100; AASHTO T-88.
Highly effective meets ASTM and AASHTO specifications.
Available in 1 lb. (0.45 kg) plastic containers.
Extensive laboratory research has shown that Sodium Hexametaphosphate
is the most effective dispersing agent available.The compound is available in
1 lb. (0.45 kg) containers.

EI2824/02.
EI2824/01.

Mechanical Analysis Stirrer (24-4132/0x).


Sodium Hexametaphosphate, 1 lb (24-4145).
Hydrometer Astm 152H (24-4640).
Hydrometer Astm 151H (24-4650).
Hydrometer Jar, 1000ml (24-4700).
Hydrometer Jar Bath (24-4867/0x).
8" Brass Sieve #4 Mesh (79-5020).
8" Brass Sieve #10 Mesh (79-5070).
8" Brass Sieve #20 Mesh (79-5120).
8" Brass Sieve #40 Mesh (79-5160).
8" Brass Sieve #60 Mesh (79-5190).
8" Brass Sieve #140 Mesh (79-5240).
8" Brass Sieve #200 Mesh (79-5260).
8" Brass Cover Less Ring (79-5400).
8" Brass Pan (79-5410).
8" Brass Sieve 3/8 Mesh (79-5510).
8" Brass Sieve 3/4 Mesh (79-5560).
8" Brass Sieve 1 1/2 Mesh (79-5610).
8" Brass Sieve 2 Mesh (79-5630).
8" Brass Sieve 3 Mesh (79-5660).
Sieve Brush (79-7220).
Fine Sieve Brush (79-7225).
Wire Sieve Brush (79-7230).
Graduated Cylinder, 1000 ml (88-6012).
Beaker, Glass 600 ml (88-6110).
Evaporating Dish, 1285ml (88-6718).

110vAC, 50/60Hz, 1.
220vAC, 50/60Hz, 1

Hydrometer Jar
ASTM D-422; AASHTO T-88.
Heavy beaded finish at top rim.
Calibrated to 1,000 ml at 20C.
Designed in accordance with ASTM and AASHTO specifications, the jar has
a heavy beaded finish on the top. A white graduation ring calibrated at 20C
displays the 1,000 ml point of the cylinder.

Specifications
Construction.
Graduation.
Dimensions.
Weight.

Glass.
1,000 ml at 20C.
2-1/2" o.d. x 18" h. (64 x 457 mm);
4-1/4" diam. (108 mm) base.
Net 1-1/2 lbs. (0.7 kg).

Ordering Information
EI24-4700.

Specifications
Compound.
Weight.

Set includes: 1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Sodium Hexametaphosphate; granular form.


Net 1 lb. (0.45 kg).

Ordering Information
EI24-4145.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

45

Soil
G R A I N S I Z E A N A LY S I S

Sand Equivalent Test Set

Sand Equivalent Shaker

ASTM D-2419; AASHTO T-176.

ASTM D-2419; AASHTO T-176; CA-217, CA-229.

Includes all components required to perform test in


accordance with ASTM and AASHTO specifications.
Metal components plated for rust resistance and long life.
Includes lightweight plastic carrying case for easy transport
and storage.

Solid state timer with 45 second, 10 minute and


continuous run cycles.
No belts to slip or replace.
Eliminates errors found in hand shaking methods.
Can be used in Durability Index Test applications.

The Sand Equivalent Test Set is designed to determine the relative proportion of
detrimental fine dust or clay-like material in soils or fine aggregates.Widely used
by highway and road laboratories, the test can easily be conducted in both the
laboratory and in the field.

The Sand Equivalent Shaker is designed to eliminate errors in manual shaking


for sand equivalent tests.The unit provides a consistent and repeatable oscillation,
eliminating variations from one operator to the next.The shaker can also be used
for the Durability Index Test.

Basically, the test is performed by separating the sand and clays in a stock solution.
Then a comparative reading of the level of the clay suspension and the settled
sand in a plastic measuring cylinder is taken.

Specifications

Specifications
Components.
Stock Solution.
Carrying Case.
Weight.

See below.
Mixture of calcium chloride and glycerin.
Plastic; holds all components.
Net 17 lbs. (7.7 kg).

Motor.
Cylinder Holder.
Shaking Mechanism.
Timing Circuit.
Dimensions.
Weight.

1.9 Amp synchronized; 1/12 hp.


Spring-loaded.
8" (203 mm) stroke; 175 strokes/minute (+/- 2 strokes).
Built-in; 45 seconds, 10 minute and continuous run.
19.5" w. x 14" d. x 17" h. (495 x 356 x 432 mm) with holder.
Net 50 lbs. (23 kg).

Ordering Information
EI24-4949/02. 110vAC, 50/60 Hz, 1.
EI24-4949/01. 220vAC, 50/60 Hz, 1.

Ordering Information
Set Includes: 1
1
1
1
1
1
1
1
1
1
1
4

Solid Rubber Stopper.


2-Hole Rubber Stopper.
Pinch Clamp.
Carrying Case.
Weighted Foot Assembly.
Funnel.
Irrigation Tube.
Siphon Tube.
Blow Hose.
Measuring Can.
Bottle Stock Solution.
Sand Equivalent Cylinders.

Accessories
EI24-4917/10. Sand Equivalent Cylinder.

EI24-4917.

Replacement Parts
EI24-4917/10. Sand Equivalent Cylinder. Clear plastic; 1-1/4" diam. x 17" h.
(32 x 432 mm); graduated to 15" x 0.1" (381 x 2.54 mm).
EI24-4936.
Stock Solution. 8 oz. bottle.
EI24-4938.
Stock Solution. 1 gallon container.

46

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
LIQUID LIMIT

Motorized Liquid Limit Device


ASTM D-4318; AASHTO T-89.
Motorized for greater uniformity of test procedure.
Mechanical counter automatically records number of cup
drops.
Totally enclosed drive system protects parts from dust and
provides added safety to operator.
Includes ten precision molded Plastic ASTM Grooving Tools.
Optional Grooving Tool available for testing to AASHTO
standards.
The Motorized Liquid Limit Device eliminates many human variables in classification testing. It allows the operator to more closely duplicate test results on the
same soil.
The unit incorporates a totally enclosed gear motor system which drives the
liquid limit device and mechanical counter assembly.
Supplied complete with Grooving Tools, the Motorized Liquid Limit Device is
ideal for use in any soils laboratory.

Specifications
Gear Motor.
Counter.
Cup.
Base.
Cam.
Housing.
Grooving Tools.
Overall Dimensions.
Weight.

Attached to metal base; enclosed in housing with on-off switch.


Mechanical; records number of cup drops.
Spun brass; pin and slot mounting.
Molded hard rubber.
Molded, self-lubricating plastic.
Aluminum; holds cup and drop adjustment parts.
ASTM type; plastic; pkg. of 10 (included).
8-1/2" w. x 15" d. x 7-1/2" h. (216 x 381 x 191 mm).
Net 14-1/2 lbs. (6.6 kg).

Ordering Information
Note: Optional Grooving Tool (EI24-0461) required to meet AASHTO specifications;
not included, order separately.
EI24-0441/02. 110vAC, 60 Hz, 1.
EI24-0441/01. 220vAC, 50 Hz, 1.

Accessories
EI24-0461.

AASHTO Grooving Tool.

Replacement Parts
EI24-0451.
ASTM Plastic Grooving Tools. Pkg. of 10.
EI24-0435/10. Brass Cup.With mounting holes.
EI24-0435/12. ASTM Slider and Pin Cup Holder Assembly.

Hand-Operated Liquid Limit Devices


ASTM D-4318; AASHTO T-89.

Precision molded base and cam components.


Precision manufactured brass cup assembly.
Removable pin cup assembly for easy cleaning and inspection.
Includes ten precision molded Plastic ASTM Grooving Tools.
Optional Grooving Tool available for testing to AASHTO
standards.
Optional model available with counter.
The Hand-Operated Liquid Limit Device is a hand operated unit, designed to
determine the liquid limit of soils.The hard rubber base is formed in a mold to
maintain the uniformity of hardness, size and density of all devices. Precision
molded cam control parts and nylon bearings provide accurate cup drop and
smooth operation.These manufacturing techniques result in a better correlation
of test results performed in laboratories around the world.

Specifications
Cup.
Base.
Cam.
Housing.
Hand Crank.
Counter.
Grooving Tool.
Weight.

Spun brass; pin and slot mounting.


Molded hard rubber.
Molded, self-lubricating plastic.
Aluminum; holds cup, drop adjustment parts and hand crank.
Aluminum.
Records number of cup drops. (Model EI24-0437only).
ASTM type; plastic; pkg. of 10 (included).
Net 5-1/4 lbs. (3.6 kg).

Ordering Information
Note: Model EI24-0437 shown.Optional Grooving Tool (EI24-0461) required to
meet AASHTO specifications; not included, order separately.
EI24-0435.
EI24-0437.

Liquid Limit Device.


Liquid Limit Device with counter.

Replacement Parts
EI24-0451.
ASTM Plastic Grooving Tools. Pkg. of 10.
EI24-0435/10. Brass Cup.With mounting holes.
EI24-0435/12. ASTM Slider and Pin Cup Holder Assembly.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

47

Soil
LIQUID LIMIT
ASTM Liquid Limit Set
ASTM D-4318.
This standard set includes our Liquid Limit Device without counter along with
a complete selection of accessories required for liquid limit testing to ASTM
standards.

Ordering Information
Set includes: 1
1
1
2
1
EI2800.

Liquid Limit Device with ASTM Grooving Tools (24-0435).


Graduated Cylinder 100 ml (88-6007).
Mixing Dish (88-6712).
Doz. Moisture Content Cans (88-7002).
Flexible Spatula (88-7500).

ASTM Plastic Grooving Tools


ASTM D-4318.

Inexpensive enough to be disposable.


Plastic construction won't rust.
Precision-molded to conform to ASTM standards.
1 cm gage block located at end of handle.
Color-coded for visual indication to change tools at proper
frequency.

The Plastic Grooving Tool is used to control the width of the soil groove in the
liquid limit cup.
With traditional metal grooving tools, the cups get scratched; the costly metal
tools get worn but are still used giving inaccurate test results. By color-coding
the grooving tools, the laboratory manager can easily identify and replace old tools
at specific intervals, assuring tool accuracy and testing results.

Specifications
Construction.
Gage Height.
Colors.
Weight.

Molded polycarbonate resin.


1 cm.
5 red and 5 white per package.
Net 3 oz. (85 g).

Package of 10.

The cone penetrometer test is based on the relationship between moisture


content and the penetration of a cone into the soil sample under controlled
conditions.

Specifications

AASHTO T-89.
Rust resistant brass construction.
1 cm gage block located at end of handle.
Meets AASHTO testing standards.
The AASHTO Grooving Tool is used to control the width of the soil groove in
the liquid limit cup, in accordance with AASHTO specifications.

Specifications

150 mm diameter graduated in 400 x 0.1 mm divisions.


Indicator incorporates a friction/gear system.
Adjustable using rapid integral clamping mechanism.
Manual.
1 x 30, 35 mm test cone included.
Cast aluminum with adjustable leveling feet.
Net 13.25 lbs. (6 kg).

Height.
Cone Release.
Cone.
Base.
Weight.

AASHTO Grooving Tool

Construction.
Gage Height.
Weight.

Reduces operator error.


Can be used on a wide range of soils.
Provides a direct measurement of penetration.

Dial Indicator.

Ordering Information
EI24-0451.

Cone Penetrometer

Ordering Information
Note: Model EI24-0540 series shown with optional Test Cup; not included,
order separately.
EI24-0540.

Cone Penetrometer.

Accessories
Brass.
1 cm.
Net 3 oz. (85 g).

EI24-0546.
EI24-0548.

Test Gauge. For checking the condition of the cone point.


Penetration Test Cup. 55 mm diam. x 40 mm deep with rim
parallel to the flat base.

Replacement Parts

Ordering Information

EI24-0544.

EI24-0461.

Penetration Test Cone. Stainless steel; 35 mm long with smooth


surface at an angle of 30.

48

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
PLASTIC & SHRINKAGE LIMIT

Plastic Limit Set


ASTM D-4318; AASHTO T-90.
The Plastic Limit Set consists of a selection of equipment required to perform
the plastic limit test in accordance with ASTM and AASHTO specifications.

Ordering Information
Set Includes: 1
1
1
1
1
1

Plastic Limit Plate (24-0810).


25 ml Graduated Cylinder (88-6002A).
Mixing Dish (88-6710).
Doz. Aluminum Moisture Cans (88-7002).
Flexible Spatula (88-7500).
Rod Comparator (24-0811).

EI2810.

Rod Comparator
ASTM D-4318; AASHTO T-90; BS-1377.
The Rod Comparator is a 3 mm diameter rod used in the Plastic Limit test as
a reference standard to compare against the soil sample during testing.

Ordering Information
EI24-0811.

Shrinkage Limit Set


ASTM D-427; AASHTO T-92.
The Shrinkage Limit Set consists of a selection of items needed to perform
shrinkage limit testing, per ASTM and AASHTO testing standards.

Ordering Information
Set Includes: 1
1
1
1
1

Monel Shrinkage Dish (24-1550).


Crystallizing Dish (24-1600).
Shrinkage Prong Plate (24-1500).
25 ml Graduated Cylinder (88-6002A).
Evaporating Dish (88-6714).

EI2820.
Special Note:
Three pounds of mercury and other accessories required for shrinkage limit test;
not included, order separately.

Shrinkage Prong Plate


ASTM D-2850, D-4767; AASHTO T-296, T-297.
Rust-resistant construction.
Three rust-resistant, metal prongs for immersing soil pat.
The Shrinkage Prong Plate is used to immerse the soil pat in the mercury bath
for accurate and reproducible determinations of the soil volume.

Specifications
Construction.
Dimensions.
Weight.

Acrylic plastic with 3 metal prongs.


3" square x 1/8" thick (76 x 3.2 mm).
Net 1 oz. (28 g).

Ordering Information
EI24-1500.

Accessories
EI24-1550.
EI24-1600.

Shrinkage Dish.
Crystallizing Dish.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

49

Soil
C L A S S I F I C AT I O N

Proving Ring Penetrometer


Brake type dial indicator holds final reading until manually
released.
250 lb. (1.1 kN) capacity proving ring.
Lightweight and compact for easy transport to the field.
The Proving Ring Penetrometer is a 30 degree cone penetrometer used to
determine the bearing capacity of subgrades or to measure soil compaction.
The penetrometer also serves as a rapid means of determining the penetration
resistance of soil in shallow exploration work.

Proctor Penetrometer Set

Specifications
Proving Ring.
Dial Indicator.
Shaft.
Extension Rod.
Cone.
Handle.
Weight.

250 lb. (1.1 kN) capacity.


Brake type.
3/4" (19 mm) diam. x 18" l. (457 mm); graduated at 6"
(152 mm) intervals.
3/4" (19 mm) diam. x 36" l. (914 mm); graduated at 6"
(152 mm) intervals.
30 degree; 1 sq. in.; replaceable.
Cast aluminum.
Net 12 lbs. (5.4 kg).

Ordering Information
EI29-3739.

ASTM D-1558.
130 lb. capacity with 1 lb. subdivisions.
Includes 9 interchangeable needles as specified in ASTM
testing standards.
Plated for rust resistance and long life.
Convenient carrying case with individual compartments.
The Proctor Penetrometer is used for determining the penetration resistance of
fine-grained soils.The unit consists of a special calibrated spring dynamometer
with a pressure-indicating scale on the stem of the handle.The pressure scale is
calibrated to 130 lbs. by 1 lb. subdivisions.There is a major division located at each
10 lb. interval. A sliding ring on the stem indicates the maximum load obtained
during the test.

Specifications
Penetrometer.
Pressure Scale.
Test Reading.
Needles.

Calibrated spring dynamometer.


130 lbs. x 10 lbs. and 1 lb. subdivisions.
Indicated by sliding ring.
Includes: 1, 3/4, 1/2, 1/3, 1/5, 1/10 1/20, 1/30
and 1/40 sq. in. end area needles.
Plastic with shelf; 18" w. x 6" d. x 4-3/4" h.
(457 x 152 x 121 mm).
Net 7 lbs. (3.2 kg).

Carrying Case.
Weight.

Ordering Information

C.O.E. Cone Penetrometer

EI29-3935.

Includes penetrometer, nine needles and carrying case.

Factory calibrated dial indicator reads directly in pounds


per square inch (psi).
Manufactured in accordance with Corps of Engineers
specifications.
The C.O.E. Cone Penetrometer is the principal instrument used in evaluating soil
trafficability. It consists of a 30 degree cone with a 1/2 sq. in. base area, proving
ring, dial indicator, extension rod and a handle.

Specifications
Proving Ring.
Shaft.
Cone.
Weight.

150 lb. capacity; dial indicator calibrated direct in psi,


0 to 300 psi by 5 psi subdivisions.
5/8" (15.8 mm) diam. x 19" l. (483 mm).
30 degree; 1/2 sq. in. base area.
Net 2 lbs. (0.9 kg).

Ordering Information
EI29-3741.

50

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
C L A S S I F I C AT I O N

Pocket Penetrometer
Direct-reading scale in tons/sq. ft. and kg/sq. cm.
Ground and polished stainless steel loading piston.
Calibrated spring and penetrometer body plated for rust
resistance and long life.
Convenient belt-loop style carrying case.
Optional Adapter Foot for testing very soft materials.
The Pocket Penetrometer was originally developed for use by field personnel in
checking visual classification of soils. Data was compiled on several thousand
unconfined compressive strength tests of silty clays and clayey soils against the
penetrometer readings to develop the scale. A close relationship exists between
the penetrometer's scale reading and soil type.

Specifications
Range.
Scale Divisions.
Load Piston.
Carrying Case.
Dimensions.
Weight.

0.25 to 4.5 tons/sq. ft. (kg/sq. cm).


0.25 tons/sq. ft. (kg/sq. cm).
1/4" (6 mm) diam.; stainless steel.
Canvas; belt-loop style.
3/4" diam. x 6-3/8" l. (19 x 162 mm).
Net 7 oz. (198 g).

Ordering Information
Note: Shown with Adapter Foot; not included, order separately.
EI29-3729.

Accessories
EI29-3729/10. Adapter Foot. 1" (25.4 mm) diam. Increases piston area 16 times
for testing on soft materials.
Special Note:
The Pocket Penetrometer does not replace field and laboratory testing analysis.

Torvane Shear Device


Determines shear strength of cohesive soils in the laboratory
or in the field.
Lightweight, rust resistant construction.
Includes three interchangeable vanes.
Lightweight plastic carrying case for easy transport to the
field.
The Torvane Shear Device enables the operator to rapidly determine the shear
strengths of cohesive soils, in the laboratory or in the field.
The Torvane is simple to use and needs no extensive specimen preparation.
All that is required is a flat sample area of at least 2" (50 mm) in diameter.
The Torvane is supplied complete with three interchangeable vanes for testing
various types of soils.

Specifications
Vane Driver.
Dial Scale.
Sensitive Vane.
Standard Vane.
High-Capacity Vane.
Carrying Case.
Weight.

1.6" (41 mm) diam. x 3.2" (81 mm) l. with vane attached.
1 kg/sq. cm (tons/sq. ft.) x 0.05 subdivisions.
0-0.2 kg/sq. cm (tons/sq. ft.); 1.875" (47.6 mm) diam.
0-1.0 kg/sq. cm (tons/sq. ft.); 1" (25.4 mm) diam.
0-2.5 kg/sq. cm (tons/sq. ft.); 0.75" (19 mm) diam.
Plastic; 6" w. x 4" d. x 2" h. (152 x 102 x 51 mm).
Net 10.5 oz. (300 g).

Ordering Information
EI26-2261.

Includes driver, three interchangeable vanes and carrying case.

Replacement Parts
EI26-2261/10. Sensitive Vane. 0-0.2 kg/sq. cm (tons/sq. ft.).
EI26-2261/12. Standard Vane. 0-1.0 kg/sq. cm (tons/sq. ft.).
EI26-2261/14. High-Capacity Vane. 0-2.5 kg/sq. cm (tons/sq. ft.).
Special Note:
The Torvane Shear Device does not replace field and laboratory testing analysis.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

51

Soil
C L A S S I F I C AT I O N

Soil Color Charts


9 constant hue charts displaying 322 colors.
Apertures cut between adjacent colors for easy viewing of
sample against color.
Charts held in convenient, pocket-sized loose-leaf binder.

Hand Vane Tester


Direct-reading scale with max-reading pointer.
Provides quick and accurate shear strength values of
cohesive soils.
Lightweight carrying case for easy transport to the field.

Soil Color Charts are widely used by civil engineers, agronomists, soil scientists,
geologists, and archaeologists all over the world.The set consists of 9 constant hue
charts displaying 322 colors on a neutral gray chart stock. Apertures cut between
adjacent colors facilitate viewing so that the soil sample may be evaluated directly
against the standard colors.

The Hand Vane Tester is an accurate and portable instrument used for the
determination of in-situ shear strength of cohesive soils, either on-site or on
undisturbed or remolded samples in the laboratory.

Specifications

The instrument consists of a torque head with a direct-reading scale which is


turned by hand. A non-return type pointer retains the test reading. A 19 mm
(0.75") diameter vane and 300 mm (11.8") extension rod is supplied as standard.

Colors.

322 constant hues on 9 charts; including colors for hydric and


submerged soils.
Neutral gray.
7-1/4" x 4-1/4" (184 x 108 mm).
Net 12 oz. (340 g).

Chart Stock.
Chart Size.
Weight.

Specifications
Torque Head.

Direct-reading with maximum pointer; aluminum construction;


graduated in kPa with conversion chart for lbs./sq. ft.
and kg/sq. cm.
19 mm (0.75") diam. 0-120 kPa (2,506 lbs./sq. ft.) capacity.
300 mm (11.8") l.
13" w. x 10-1/2" d. x 3-1/2" h. (330 x 260 x 85 mm).
Net 5-1/2 lbs. (2.5 kg).

Vane.
Extension Rod.
Carrying Case.
Weight.

Ordering Information
EI26-3346.

Includes 19 mm (0.75") vane, extension rod and carrying case.

Ordering Information
EI23-7100.

Includes pocket-sized loose-leaf binder.

Accessories
EI23-7120.

Tropical Soil Charts. Special charts for reddish tropical soils


which are recommended for regions such as South and Central
America, Africa, India, Malaysia and similar tropical areas. Includes
two charts that fit into EI23-7100 binder.

Special Note:
Gley Soil Charts are now included as standard.

Accessories
EI26-3346/10. 33 mm (1.29") diam.Vane. For readings from 0 - 28 kPa
(585 lbs./sq. ft.).

Sand Grading Chart


A unique chart useful to soils engineers, geologists, contractors, and soil
scientists for uniform classification of sands.

Specifications
Sample Panels.
Particle Shape Panels.
Chart Size.
Weight.

Very coarse; coarse; medium; fine; very fine; silt.


Angular; sub-angular; sub-rounded and rounded.
3-1/4" w. x 4" h. (83 x 102 mm).
Net 1 oz. (28 g).

Ordering Information
EI23-7130.

52

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
SAMPLING
Lightweight Motorized Hoist

Drill Rod

4-cycle gasoline motor driven.


Built-in centrifugal clutch.
Ideal for use with 140 lbs. drive weight.

Manufactured from cold drawn steel tubing.


Square threads.
Furnished with one flush coupling.

Specifications

Ordering Information

Engine RPM.
Cathead O.D.
Cathead RPM.
Lifting capacity.
Weight.

3600.
4-1/2" (114 mm).
175-225.
500 lbs. (227 kg).
Net 155 lbs. (70 kg).

Ordering Information

Model No.

Rod Length

Thread Type

EI23-1330/11
EI23-1330/14
EI23-1330/17
EI23-1330/19

1 ft. (0.3 m)
2 ft. (0.6 m)
5 ft. (1.5 m)
10 ft. (3.0 m)

AW
AW
AW
AW

Weight
4.3 lbs. (1.9 kg).
8.6 lbs. (3.9 kg).
21.5 lbs. (9.7 kg).
43 lbs. (19.5 kg).

Replacement Parts

EI23-1320.

EI23-1330/21. AW Drill Rod Coupling.

Tripod

Drive Weight, with Chain

Aluminum tripod derrick, tie bolt & bail for 10 ft. (3 m) pulls.
Derrick legs consist of 8 ft. (2.4 m) lengths.

Ordering Information
EI23-1332.

140 lb. (64 kg) Drive Weight.

Specifications
Leg length.
Weight.

16 ft. (4.8 m).


Net 165 lbs. (75 kg).

Ordering Information

Ordering Information

EI23-1336.

EI23-1322.

Tripod Sheave for Manila Rope


Specification
Weight.

Safety Drive Hammer

Net 10 lbs. (4.5 kg).

Ordering Information
EI23-1324.

140 lb. (64 kg).With AW rod connection.

Drive Pipe Assembly

Double extra heavy drive pipe.


Threaded at both ends.
Includes a drive pipe coupling.
Coupling screws directly into the top of drive head
(not included).
Pipe stem serves as guide for drive weight.
Ordering Information
EI23-1337.

Manila Rope

Drive Head

Specification
Weight.

Net 14 lbs. (6.3 kg).

Ordering Information
EI23-1326.

75 foot (23 meter) roll.

Threaded with "A" pin.


Thread (Ax Box) on bottom.
AW casing size.
Ordering Information
EI23-1338.

Safety Hook

Pipe Drive Ring

Specification
Weight.

Ordering Information
EI23-1328.

Net 1 lb. (0.45 kg).

When drive coupling is used, Pipe Drive Rings are recommended to distribute
effort from the drive weight.

Ordering Information
EI23-1339.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

53

Soil
SAMPLING

Thin Wall Tube Samplers


This sampler is designed to take undisturbed samples in cohesive type soils and
clays.The thin steel tube containing the sample may be removed from the sampler
head and used as a container for transport to the lab.

Ordering Information
Model No.
EI23-1352

O.D.
2"

I.D.
1-7/8"

Sampler Length
30"

Connection
AW

Extra Tube
EI23-1352/10

Horizontal Sample Ejector


Ejects samples from thin wall tubes for laboratory testing.
Accepts a variety of tube sizes.
Heavy-duty construction for long service life.
The Horizontal Sample Ejector is designed for the ejection of samples contained
in thin wall tubes (Shelby Tubes).The ejector eliminates the necessity for cutting
the tube samplers to recover a sample for examination and testing.
With the Horizontal Sample Ejector, specimens can be uniformly pushed from
the sampling tubes until the desired length is reached. Equipped with spacers and
interchangeable supports, the ejector can accommodate tube samplers varying in
length from 4" to 24" (102 mm to 610 mm).The standard ejector is supplied with
tube supports and grips for 2" and 3" (50.8 mm and 76.2 mm) diameter tubes.

Standard Split Tube Samplers


This Split Tube Sampler is designed for taking soil samples at the bottom of a
cleaned bore hole by the drive weight method.The split section is held together
with a ball check head and hardened steel drive shoe.

O.D.
2"
2"

I.D.
1-1/2"
1-1/2"

Specifications
Capacity.

Ordering Information
Model No.
EI23-1346
EI23-1350

The assembly is mounted on a sturdy I-beam base which may be placed on a


table or bench. Large thrust bearings are used in gear box for easy operation.The
ejector screw is operated by turning the large hand crank assembly at the end of
the device.

Sampler Length
18"
24"

Connection
AW
AW

Extra Shoe
EI23-1346/10
EI23-1350/10

Basket Retainers

2" and 3" diam. (50.8 and 76.2 mm) x 4" to 24" l.
(102 to 610 mm) tubes.
I-Beam construction.
Thrust bearing; hand crank assembly drive.
Table or bench.
Net 119 lbs. (54 kg); Shpg. 145 lbs. (66 kg).

Base.
Gear Box.
Mounting.
Weight.

Ordering Information

Basket retainers have flexible fingers that open to admit loose, dry sand then close
to form a tight lock.The sample is retained while the sampler is removed from the
hole.

EI23-1370.

Includes tube supports and grips for 2" o.d. (50.8 mm) and
3" o.d. (76.2 mm) tubes.

Ordering Information
EI23-1356.

For 2" Samplers.

Plastic Caps
These caps are used to seal the ends of thin wall tubes for transport.

Ordering Information
EI23-1360.

For 2" Thin Wall Sample Tubes.

54

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
SAMPLING

Basic Auger Kit


Basic soil sampling tools in one field ready kit.
Includes access augers, extensions, and core sampler.
Accessories included in convenient carrying case.

Sample Ejector
Fast sample extrusion from molds and sampling tubes up
to 7" (178 mm) long.
6,000 lbf. (26.7 kN) hand-operated hydraulic jack.
Bench top design for use in both the laboratory and the field.
All metal construction treated for rust resistance and long life.
Fast extrusion and ejection of soil samples from molds and short lengths of
sample tubing are accomplished with the EI23-4085. Designed in a heavy-duty
bench style, the ejector has a pushing force of 6,000 lbf. (26.7 kN) which is developed through a hand-operated hydraulic jack.This ejection force permits removal
of samples with only a minimum of disturbance.
The unit is supplied complete with accessories for ejecting samples from 2"
(50.8 mm) and 3" (76.2 mm) shelby tubes, 4" (101.6 mm) or 6" (152.4 mm)
molds, up to 7" (178 mm) long.

Pushing Force.
Jack.
Construction.
Dimensions.
Weight.

Three augers (one each regular, sand and mud), extensions, a core sampler, slide
hammer, cross handle and accessories are conveniently packaged in a deluxe
carrying case.

Specifications
Augers.

Tungsten carbide coated high carbon bits with stainless steel


cylinders and forged high carbon steel bails; regular, mud and
sand types included.
Standard type with slide hammer.
Threaded (5/8 thread); 4 ft. (1.2 m) l; three included.
Cross handle, cleaning brush, wrenches and carrying case
included.
60 lbs. (27 kg).

Core Sampler.
Extensions.
Other Components.
Weight.

Ordering Information
EI23-1378.

Specifications
Capacity.

The Basic Auger Kit has virtually everything you need in one place for obtaining
soil samples.This kit is field ready. It includes all the tools necessary to not only get
down to your required sampling depth with ease under a variety of soil conditions
but also to retrieve a sample.

With 3-1/4" (82.5 mm) augers and 2" x 6" (50.8 x 152.4 mm)
core sampler.

2" (50.8 mm) and 3" (76.2 mm) shelby tubes; 4" (101.6 mm)
and 6" (152.4 mm) molds; up to 7" l. (178 mm).
6,000 lbf. (26.7 kN).
Hydraulic; hand-operated; 7" (178 mm) stroke.
All metal; plated extrusion plates and piston discs; painted finish
on housing and pump.
10-1/2" w. x 8" d. x 22-1/2" h. (267 x 203 x 571 mm).
Net 64 lbs. (29 kg); Shpg. 75 lbs. (34 kg).

Ordering Information
EI23-4085.

Accessories
EI23-4085/10. Ejector Head and adapter plate for 2.5" o.d. x 2.416" tubes.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

55

Soil
SAMPLING

Regular Augers

Sand Augers

Extra long, open bail for emptying.


5/8" (15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced; heat
treated before sharpening.
Includes 36" (914 mm) extension and chrome cross handle.

Extra long, open bail for emptying.


(15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced; heat
treated before sharpening.
Includes 36" (914 mm) extension and chrome cross handle.

The Regular Auger is used for ordinary soil sampling and for accessing the
sampling point when undisturbed samples will be taken with a core sampler.
Specially designed bits guarantee easy penetration.

The Sand Auger was designed for use in extremely dry, sandy soils. Its bits are
specially formed to retain sand samples.

Ordering Information
Ordering Information
EI23-1380.

EI23-1384.

3-1/4" diam. (82.5 mm).

3-1/4" diam. (82.5 mm).

Accessories
Accessories
EI23-1389.

EI23-1389.

Auger Extension, 60" (1,524 mm).

Auger Extension, 60" (1,524 mm).

Mud Augers

Dutch Augers

Extra long, open bail for emptying.


5/8" (15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced; heat
treated before sharpening.
Includes 36" (914 mm) extension and chrome cross handle.

The Mud Auger features an open cylinder design facilitating easy removal of heavy,
wet soil or clay samples. Bits are similar to the Regular Auger bits but are spaced
farther apart.

Extra long, open bail for emptying.


5/8" (15.8 mm) threaded extension couplings.
Cutting edges are heat treated before sharpening.
Includes 36" (914 mm) extension and chrome cross handle.

The Dutch Auger is hand-forged from high-carbon spring steel and honed to a
fine cutting edge. Its design makes it an excellent tool in heavily rooted, fibrous
or swampy areas.

Ordering Information
EI23-1386.

Ordering Information
EI23-1382.

3" diam. (76.2 mm).

3-1/4" diam. (82.5 mm).

Accessories
EI23-1389.

Accessories
EI23-1389.

Auger Extension, 60" (1,524 mm).

Auger Extension, 60" (1,524 mm).

56

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

Soil
SAMPLING

Post Hole Augers (Iwan Type)


High strength carbon steel blades.
Optional extension shafts for greater depth capabilities.
Post Hole Augers are widely used for easy and rapid advancement of the
sampling hole. High strength carbon steel blades are riveted to a tough
malleable iron yoke.The augers are supplied complete with a high strength
steel shaft and hardwood handle assembly.

Specifications
Blades.
Shaft.
Handle.
Weights.

Carbon steel.
36" l. (914 mm).
Wood.
EI23-1391: Net 7 lbs. (3.2 kg).
EI23-1392: Net 9 lbs. (4.1 kg).
EI23-1393: Net 11 lbs. (5 kg).

Ordering Information
EI23-1391.
EI23-1392.
EI23-1393.

3" diam. (76 mm).


4" diam. (102 mm).
6" diam. (152 mm).

Accessories
EI23-1397.

Auger Extension 36" l. (914 mm). Net Wt. 3 lbs. (1.4 kg).

Replacement Parts
EI23-1391/10.
EI23-1392/10.
EI23-1393/10.
EI23-1393/12.

3" (76 mm) Blade Head Assembly.


4" (102 mm) Blade Head Assembly.
6" (152 mm) Blade Head Assembly.
Handle and Shaft Assembly.

ELE Hand Auger


Heavy-gage, heat-treated bucket for long service life.
Cupped blades for easy hole advancement.
Easily assembled using quick connector pins.
The ELE Hand Auger system is ideally suited for augering shallow holes in finegrained soils.The cupped blade design allows for easy advancement into the soil
with very little effort.
The complete auger system consists of one auger head, one tee handle, one
auger extension and quick connector pins.

Specifications
Auger Head.

3-1/4" (82.5 mm). Heavy gage, heat treated carbon steel


with cupped blades.
Plated steel construction.
36" (914 mm) long; plated steel construction.
Used to connect auger head to extension and tee handle.
Net 6 lbs. (2.7 kg).

Tee Handle.
Extension.
Pins.
Weight.

Ordering Information
EI23-1400.

Replacement Parts
EI23-1400/10.
EI23-1400/11.
EI23-1400/12.
EI23-1400/13.

3-1/4" (85.2 mm) Auger Head with connector pin.


Tee Handle with connector pin.
Auger Extension with connector pin. 36" (914 mm) long.
Connector Pin.

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

57

Soil
S A M P L I N G & WAT E R L E V E L

Oakfield Soil Sampling Kit


Compact, portable kit for sampling in all types of soils.
Plated for rust resistance and long life.
The Oakfield Soil Sampling Kit was developed for rapid sampling in all types of
soils.The kit contains a sampling tube for soft loamy soils and an auger for sampling
dense, hard or frozen soils.
Although developed for sampling of soils for agricultural purposes, the kit is a
valuable tool in preliminary soils investigations of all types.

Specifications
Sampling Tube.
Core Size.
Auger.
Extension Rods.
Weight.

15/16" o.d. x 12-1/2" l. (24 x 318 mm).


3/4" diam. x 9" l. (19 x 229 mm).
1-1/4" diam. x 8-1/2" l. (38 x 216 mm).
Two included; 12" l. (305 mm).
Net 3 lbs. (1.4 kg).

Ordering Information
EI23-1410.

Includes tube and auger samplers, two extension rods,


handle and fiber board case.

Replacement Parts

Water Level Indicators, English Scale


State-of-the-art electronic circuitry.
Incorporates both visual and audible indication of water
contact.
Stainless steel/Teflon probe assembly marked at one foot
intervals.
Water Level Indicators are portable instruments used for determining the water
level in bore holes, wells, and other open underground structures.The units consist
of a cable reel with electronic circuitry and alarm module; a multi-conductor cable
with permanent marking at specified intervals; and a stainless steel/teflon sensing
probe assembly which is segmented for flexibility. A convenient carrying handle is
part of the frame.

EI23-1410/10. Extension Rod.


EI23-1410/12. Sampling Tube.

Specifications
Electronic Module.

Single frequency, high efficiency audio sounder; 1/4" (6.35 mm)


bright red LED visual indicator.
Stainless steel and Teflon construction; 3/8" o.d. x 1-1/2" l.
(9.525 x 38.1 mm) body with 6-3/8" o.d. x 1" l.
(9.5 mm x 25.4 mm) weights.
24 gage, two conductor copper-coated steel wire;
black numbers and red reference marks.
Black powder coated welded steel frame; probe clip;
spool assembly and drag style brake control;
carrying handle part of frame.
100-150 ft.: Net 4 lbs 2 oz. (1.8 kg).
300-500 ft.: Net 5 lbs. 6 oz. (2.4 kg).

Probe.

Cable.
Frame.

Weights.

Sample Bags
Durable drawstring cord.
Available with vinyl plastic liner, seamed stitched inside.

Ordering Information

Sample Bags are constructed of a high count drill with sewed seams.These Sample
Bags have a drawstring cord and are ideal for carrying and shipping samples from
field to laboratory.

EI23-1750.
EI23-1751.
EI23-1752.
EI23-1753.

Specifications

Accessories

Bag.
Lining.

High count drill; cord drawstring.


Vinyl plastic; seam-stitched inside (optional).

Ordering Information
Unlined:
EI23-1420.
EI23-1422.

10" x 18" (254 x 457 mm).


17" x 32" (432 x 813 mm).

EI23-1754.

100 ft. depth capacity.


150 ft. depth capacity.
300 ft. depth capacity.
500 ft. depth capacity.
Plastic Carrying Case.

Replacement Parts
EI23-1755/10.
EI23-1750/10.
EI23-1751/10.
EI23-1752/10.
EI23-1753/10.

Probe Assembly.
100 ft. Cable.With 1 ft. markings.
150 ft. Cable.With 1 ft. markings.
300 ft. Cable.With 1 ft. markings.
500 ft. Cable.With 1 ft. markings.

58

tel: 1-800-323-1242 fax: 1-970-663-9781 web: www.eleusa.com

You might also like