Professional Documents
Culture Documents
Working Principle:
The Distinctive Principle of ULTRAFINE GRINDER
is based on a high Air throughput in the Grinding area.
This high Amount of Air is converted in to A
Tremendous Turbulence by the Rotating & Stationary
parts of the Machine as well as by an appropriate
Guidance of the Air stream in the Mill.
The numerous Air Whirls in the Grinding chambers
accelerate the Product up to the High Velocity of the
Air. The Direction & The Speed of the particles is
suddenly changed within extremely short periods. As a
result of this principle the particles crash against each
other so reaching a careful disintegration in high Air
stream. A small percentage of grinding taking place by
in pact with the rotating or stationary part of the Mill..
The Creation of numerous air whirls in the single
grinding chamber their increased turbulence by the
inner grooved liner & the pulsation of the high air
velocity make it Micronics.
Simple adjustment to the machine allow a narrow distribution range of out put particle our wet, Dry, Fibrous
or Heat Sensitive materials.
Operation (Maintenance - Installation):
No Foundation, Mechanically simple & Robust, operation & maintenance, No specialized personnel,
Pneumatic Conveying of the Grind Product over 30-40 H height.
PRODUCTS CURRENTLY BEING GROUND
Grinder for Powders
Pharmaceuticals
Wood Flour Grinding
Dextrose
Cocoa Press
Grinder for Guar Gum
Tamarind Flour
Chicory
Tyre Rubber
Carbon Block
Grinding of Cosmetic
Polypropylene
Pigment Grinding
Adhesives
Grinder for Dyes
Clays
Salt
Calcium
Fish Grinding
Standard Models:
Vertical Type , Three Part.
2.
Model
H.P
T-5
T-15
T-25
T-50
T-100
T-110
T-200
5-10
15-30
50-75
75-100
100-120
120-180
200-250
Cap- Kg/Hour
Wheat
150
400
800
1500
2000
2500
5000
Guar
10
40
80
150
200
250
500
* We will design, develop, fabricate and install as per customer production capacity and quality requirement.
Search Produc
Home
Products
Product Specification
Guar Gum Plant Machinery
The plant has been configured and designed in such a way that minimum work force will require. The guar
split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the
high of plant. The screening will be employed for the removal of foreign matter. This screened material will
be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which
is configured below the screen. From storage hopper material can be taken in to double cone mixer as and
when required by gravity for the prehydrating of guar splits.
All the prehydrated guar split will be sent to the hopper of Flaker at a time by gravity. Flaker will crush the
guar splits and crushed guar splits will go into the Ultrafine grinder at the uniform rate
<< Back