Professional Documents
Culture Documents
When the machines are running offload, the piston turns on air-cushions
at either end of the cylinder, virtually
eliminating metal-to-metal contact
and reducing vibrations and wear
Simplicity
Simplicity of design means fewer parts,
less hassle, easier on-site service and
maintenance and therefore less down
time. Good news for everyone who
buys, rents, or operates our machines.
When we first introduced the TEX
range we raised the bar for the industry
and it became a global leader. And still
is.
The most recent additions to the TEX
range include new design features that
live up to the TEX breakers reputation
for excellent handling, performance and
reliability. Simplicity, in the design
and the function of the eight most
recent models TEX 140 - 280, sets a
new standard for pneumatic breakers
again!
In each series, and in some cases
also between the series, TEX breakers
Chisel range
Good breakers should have good tools
to match. Atlas Copco has a full range of
quality tools for your breakers.
Page 14-15
PE vibro-reduced breakers
For the new PE breakers, with springmounted handles, we have further
improved the vibration characteristics,
decreasing the vibration emissions. The
new breakers are still as hard-hitting and
Service jobs
General demolition
PS breakers noise-reduced,
standard breakers
These fixed-handle breakers feature all
the advantages of the PE series except
the vibro-reducing handles. They are as
hardy, reliable and productive as ever.
Noise reduction
The wear-resistant polyurethane silencer
cuts noise emission by up to 75 % (as compared to the same machine without noise
reduction, ISO 3744). Its slim profile lets the
operator see the point of the chisel and the
work-piece.
Air cushioning
To reduce vibration and wear, the piston turns on air-cushions at either end
of the cylinder. When the machines
are working off-load, this practically
eliminates metal-to-metal contact.
TEX 150PE
TEX 150PE US
TEX 190PE
TEX 190PE US
TEX 230PE
TEX 280PE
Ergo kit
TEX 140PS
Part number
3310 1458 61
3310 1458 60
Optional equipment
Part number
Hand hose 20 mm x 3 m with claw
coupling, wing nut and hose clamps
9030 2048 00
Tool shank
Weight
Length
Air
consumption
Impact
frequency
mm
22x82.5
25x108
25x108
25x108
28x160
25x108
25x108
28x160
32x160
28x160
32x160
kg
19
19
19
22.5
23.0
22.5
25.5
27.0
27.0
31.5
31.5
mm
590
590
590
595
645
595
625
670
670
690
690
l/s
25
25
25
26
26
26
30
30
30
32
32
blows/min
1530
1530
1530
1500
1500
1500
1320
1320
1320
1230
1230
22x82.5
25x108
TEX 140PS US
25x108
TEX 180PS
25x108
28x160
TEX 180PS US
25x108
TEX 220PS
25x108
28x160
32x160
TEX 270PS
28x160
32x160
Data at 6 bar (90 psi) air pressure
15.5
15.5
15.5
19.0
19.5
19.0
22.0
23.5
23.5
28.0
28.0
590
25
590
25
590
25
595
26
645
26
595
26
625
30
670
30
670
30
690
32
690
32
Claw coupling:
Atlas Copco standard:
Atlas Copco standard with strainer:
US standard:
1530
1530
1530
1500
1500
1500
1320
1320
1320
1230
1230
Part number
8461 0223 31
8461 0223 33
8461 0223 35
8461 0224 31
8461 0224 33
8461 0224 35
8461 0225 31
8461 0225 34
8461 0225 35
8461 0226 32
8461 0226 33
8461 0223 30
8461 0223 32
8461 0223 34
8461 0224 30
8461 0224 32
8461 0224 34
8461 0225 30
8461 0225 32
8461 0225 33
8461 0226 30
8461 0226 31
9000 0306 00
9000 0306 01
9001 0005 06
Service jobs
General demolition
Effective silencer
Cuts noise level by up
to 75% (as compared
to the same machine
without noise reduction, ISO 3744)
Optional equipment
TEX 21PE-1
Part number
9030 2048 00
Tool shank
Weight
Length
Air
consumption
Impact
frequency
mm
kg
mm
l/s
blows/min
Part number
25x108
20
635
23
1200
8461 0224 20
20
600
23
1200
8461 0224 21
25x108
21
650
23
1200
8461 0224 22
21
615
23
1200
8461 0224 23
Claw coupling:
Atlas Copco standard:
Atlas Copco standard with strainer:
US standard:
9000 0306 00
9000 0306 01
9001 0005 06
Easy to manoeuvre
With a low centre of gravity, these
breakers are well balanced and easy to
handle. The unique air inlet swivel, which
can be rotated even when pressurized,
makes the TEX breakers still easier to
manoeuvre.
productivity when cutting softer materials like asphalt and therefore it has a
high blow frequency.
Reduced wear
The anvil block, a tried and tested design
from earlier heavy models, not only helps
handle the great impact energy, but also
helps avoid damage to the hammer mechanism from worn out chisel shanks.
General demolition
Controlled power
There is power in abundance, but it is easy to control. Thanks to the
SOFSTARTTM two-step trigger, the operator can begin to hammer slowly, setting the chisel where its needed, without a lot of wasted effort.
Full-shift lubricator
The built-in lubricator ensures sufficient lubrication
to minimize tool wear. It is easily accessible, accepts
both mineral and synthetic oils and holds enough oil
for an entire shift.
Air-cushioned action
TEX P60 and TEX P90 feature air-cushioned
piston return. This means less vibration
during back hammering and blank hammering, which reduces stress on man and
machine.
Optional silencer
The silencer, available as an option, significantly reduces the noise level. Thanks to its slim
design, it provides a full view of the chisel and
work-piece for maximum control.
TEX P60S
TEX P90*)
TEX P90S
Weight
Air
consumption
Length
Impact
frequency
mm
kg
l/s
mm
blows/min
28x160
31
36
690
1500
8461 0227 20
32x160
31
36
690
1500
8461 0227 21
28x160
33
36
690
1500
8461 0227 22
32x160
33
36
690
1500
8461 0227 23
28x160
41
40
710
1260
8461 0228 20
32x160
41
40
710
1260
8461 0228 21
28x160
43
40
710
1260
8461 0228 22
1260
8461 0228 23
32x160
Data at 6 bar (90 psi) air pressure
Optional equipment
Part number
Hand hose 20 mm x 3 m with claw
coupling, wing nut and hose clamps
Tool shank
9030 2048 00
43
40
710
Claw coupling:
Atlas Copco standard:
Atlas Copco standard with strainer:
US standard:
Part number
9000 0306 00
9000 0306 01
9001 0005 06
*) The unsilenced TEX P60 and TEX P90 are not CE-marked and not sold for use within the EEA (European Economic Area), i.e. EU
plus Norway, Iceland and Lichtenstein
11
General demolition
The TEX 32PS and TEX 39PS offer stateof-the-art noise reduction in combination with an efficient and well-proven
design. These reliable workhorses are
at work all around the world. They have
fixed handles, but are otherwise identical to the vibro-reduced units.
The various models in the series have
many common parts and therefore your
parts inventory can be kept to a minimum.
Reduced wear
The anvil block, a tried and tested design from earlier heavy models, not
only helps handle the great impact
energy, but also helps avoid damage
to the hammer mechanism from
worn out chisel shanks.
An integrated lubricator
helps minimize tool wear. It holds enough
lubricant to last an entire shift. In freezing
conditions, it can also be used for anti-freeze
such as Atlas Copco AIR-OIL.
Air-cushioned action
When the machines are working off-load,
the piston turns on air cushions at either
end of the cylinder, virtually eliminating
metal-to-metal contact and reducing
vibration and wear.
Tool shank
Weight
Air
consumption
Length
Impact
frequency
blows/min
Part number
mm
kg
l/s
mm
28x160
37
35
745
1200
8461 0227 01
32x160
37
35
745
1200
8461 0227 00
8461 0228 05
28x160
42
40
750
1110
32x160
42
40
750
1110
8461 0228 04
TEX 32PS
28x160
34
34
745
1200
8461 0227 03
Ergo kit
32x160
34
34
745
1200
8461 0227 05
TEX 39PS
28x160
39
40
750
1110
8461 0228 03
32x160
39
40
750
1110
8461 0228 01
TEX 32P*)
28x160
32
34
745
1200
8461 0227 02
32x160
32
34
745
1200
8461 0227 04
37
40
750
1110
8461 0228 02
For models
Part number
3310 1105 60
Optional equipment
Part number
Hand hose 20 mm x 3 m with claw
coupling, wing nut and hose clamps
9030 2048 00
TEX 39P*)
28x160
32x160
Data at 6 bar (90 psi) air pressure
37
40
750
1110
8461 0228 00
Claw coupling:
Atlas Copco standard:
9000 0306 00
Atlas Copco standard with strainer:
9000 0306 01
US standard:
9001 0005 06
*) The unsilenced TEX 32P and TEX 39P are not CE-marked and not sold for use within the EEA (European Economic Area), i.e.
EU plus Norway, Iceland and Lichtenstein
13
x 3-1/4)
28 x 160 mm
( 1 x 4-1/4)
( 1-1/8 x 6-1/4)
25 x 108 mm
A=41 mm
B=22 mm
C
A
C=12 mm
D=82,5 mm
A=41 mm
B=25 mm
C=12 mm
D=108 mm
A=46 mm
B=28 mm
C=6 mm
D=160 mm
10
380
1000
3083 3242 00
3083 3243 00
380
3083 3253 00
380
450
1000
3083 3271 00
3083 3272 00
3083 3273 00
28
28
380
1000
3083 3244 00
3083 3245 00
28
380
3083 3254 00
36
36
36
390
450
1000
3083 3274 00
3083 3275 00
3083 3276 00
75
380
3083 3246 00
75
380
3083 3255 00
75
380
3083 3277 00
Wedge chisel
35
380
3083 3250 00
35
380
3083 3258 00
40
400
3083 3282 00
Digging chisel
75
450
3083 3247 00
75
380
3083 3256 00
75
380
3083 3279 00
Digging spade
120
400
3083 3248 00
120
380
3083 3257 00
125
380
3083 3280 00
Asphalt cutter
125
380
3083 3069 00
115
300
3083 3278 00
Clay Spade
125
430
3083 3249 00
125
430
3083 3033 00
140
380
3083 3281 00
310
3083 3251 00
280
3083 3259 00
230
3083 3283 01
175
3083 3252 10
175
3083 3252 10
180
3083 3301 00
175
3083 3239 00
175
3083 3239 00
150
3083 3302 00
200
3083 3197 00
25
26
10
41,5
22
Moil point
75
Narrow chisel
22
25
26
10
Wide chisel
12
38
75
D
D
10
D
D
22
25
10
25 25
D 75
D75
22
22
22
10
10
25
10
22
25
10
75
75
25
10
10
10
22 22
25
25 25
75
75
75
75
22
10
10
22
75
75
22
10
25
25
10
10
22 22
25
25
22
75
25
22
75
75
B B
75
D
D
C
C
A
A
10
41,5
A
22
25 25
25
26 26
26
10
10
41,5
41,5
10
22 22
10
10
75
75
D
75
38
41,5
A
38
1210
12
38
12
222222
22
252525
10
25
26
14
26
26
26
1010
10
D
7575
75
75
C
A
32 x 160 mm
25 x 75 mm
10
25
26
A=46 mm
B=32 mm
C=6 mm
D=160 mm
10
41,5
75
3083 3205 00
3083 3206 00
3083 3207 00
380
3083 3211 00
75
10
41,5
330
450
3083 3265 00
3083 3265 10
26
26
330
450
3083 3266 00
3083 3266 10
22
10
Narrow chisel
22
75
12
38
25
3083 3208 00
3083 3209 00
3083 3210 00
26
380
450
1000
25
36
36
36
10
Moil point
26
380
450
1000
75
10
75
10
41,5
75
22
25
3083
3213 00
10
380
12
38
10
25
26
26
41,5
1 x 3)
75
22
25
3083 C3216 00
400
22
26
10
40
1 x 3)
22
( 1-1/4 x 6-1/4)
75
Narrow chisel
450
3083 3316 00
Digging chisel
75
420
3083 3317 00
Clay Spade
135
420
3083 3318 00
38
12
10
12
25
22
Oil volume
Weight
Part number
gal
kg
1 l bottle
0.22
1.1
8099 0202 36
5 l container
1.1
5.8
8099 0202 02
25
5.5
28
8099 0202 20
75
3083 3301 00
B
Description
10
25
12
38
180
75
3083 3218 01
26
235
75
10
41,5
22
38
10
25
3083 3215 00
26
26
10
380
10
75
140
22
22
75
3083 3212 00
300
41,5
25
75
22
115
22
12
25
38
26
10
25
3083 3214 00
380
26
125
26
10
C
A
10
10
41,5
75
3083 3197 00
38
12
25 l container
22
10
25
26
200
22
3083 3302 00
25
26
150
75
15
9800 0767 01