Professional Documents
Culture Documents
In the following lesson we create a catalog from scratch for Cantor Piping. They have specific
sizes that they do not want allowed in their piping ranges.
1. Open the Spec Editor
Alternatively, right-click Size Tables in Catalog Data, and then select Add Size
Table
.
The Current Units box will be grayed out and should contain the units
currently associated with the open catalog.
5. Click OK.
The new size table displays in the main screen with the description we typed in at the
top left. It is also added to Catalog Data under Size Tables.
We now need to add the new sizes for all the components that will later be added to this
catalog.
1. Right-click in the main window, and then click Add Standard Size.
The Select size from template dialog box displays.
2. Click the Select / deselect all check-box to add all sizes, and then click OK.
The sizes selected are displayed in the main window.
Now we will add a new size to the table.
1. Right-click in the main window, and then click Add New Size.
An empty line is displayed at the bottom of the list.
2. Type 16.5000 (425) under NOM.
3. Type 17.0000 (450) under OD.
4. Type "16 1/2" ("425mm") under DESCRIPTION.
5. Type 0044 under PTN.
6. Save the catalog by clicking File > Save.
Now Add a material table to the catalog.
Alternatively, right-click Material Tables in Catalog Data, and then select Add
Material Table
.
Alternatively, right-click Schedule Tables in Catalog Data, and then select Add
Schedule Table
.
Alternatively, right-click Thickness Tables in Catalog Data, and then select Add
Thickness Table
.
Alternatively, right-click EndType Tables in Catalog Data, and then select Add
EndType Table
.
Add a category
Alternatively, right-click Data Tables in Catalog Data, and select Add Category
.
1. Click the (+) sign on the Data Tables file in Catalog Data.
The Data Tables file expands displaying the categories.
2. Select Elbows.
3. Click the Home tab, and then click Data Table
Alternatively, right-click a category in Data Tables in Catalog Data, and then select
Add Data Table
.