Professional Documents
Culture Documents
This form can be filled out and emailed from Adobe Acrobat Reader, alternatively please
fax a copy of the completed form to 01209 219 541.
Please complete 1 row for each thin section required.
ORDER FORM NOTES
Orientation for the long (~45 mm) side of the section (or leave blank if not relevant). P = parallel to the long axis of the
specimen; T = transverse to the long axis of the specimen.
Standard Section is for a standard 30 m thin section, finished section area approx. 45 x 30 mm with cover slip (overall section
dimensions 65 mm x 55 mm on 2 mm thick glass). Polished Sections are Standard Sections, but with an uncovered polished top
surface. Polished Blocks are 30 mm diameter resin mounts.
Standard Sections are impregnated with epoxy resin containing fluorescent yellow dye. For sections without dye please mark the
No Dye box.
Water Sensitive Preparation by special arrangement only, subject to additional charge and minimum order (and only possible on
Standard Sections).
Orientation
Ordered by:
Extra Section
Ref. (if any)
P or T
Choose Type
Options
Water
Sensitive
Prep
Return address:
Contact tel:
Petrolab Limited Registered Office: C Edwards Offices, Gweal Pawl, Redruth, Cornwall TR15 3AE.
Registered in England & Wales Company No: 4777735
Jul-12 Rev A
30mm
30mm
45mm
Top
petrolab.co.uk
45mm
Top
petrolab.co.uk
MARKING METHOD
Mark preferred cut line for thin
section (on both sides of
specimen)
and
orientation
arrow (if required). Hatch
area(s) of no interest. Select a
preference (if any) on the order
form for the long side of the thin
section to be parallel (P) or
transverse
(T)
to
the
specimen's long axis.
If no sample markings are
present then a thin section will
be made from a non specified
part of the specimen, either
parallel or transverse to the
long axis, with no orientation
mark.
If it is not possible to mark the
specimen then please provide
a sketch showing the preferred
positioning information.