You are on page 1of 3

http://msdsreport.

com/msds/BBSFR

PLASTI DIP SPRAY (PDS) - AEROSOL CAN


MSDS Number
BBSFR

National Stock Number


6850-00F005312

Product Name
PLASTI DIP SPRAY (PDS) - AEROSOL CAN

Manufacturer
PDI INC

Product Identification
Product ID:PLASTI DIP SPRAY (PDS) - AEROSOL CAN
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005312
MSDS Number: BBSFR

Responsible Party
PDI, INC/ST. PAUL, MN 55113
Emergency Phone: (612) 633-9633
Cage: FO049

Contractor
PDI, INC/ST. PAUL, MN 55113
CIRCLE PINES, MN 55014
US
612-785-2156
Cage: FO049

Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 17%
OSHA PEL350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)


CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 7%
OSHA PEL100 PPM

METHYLENE CHLORIDE (SARA III)


CAS: 75-09-2

http://msdsreport.com/msds/BBSFR

RTECS: PA8050000
Fraction By Weight: 3%
OSHA PEL500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS

TOLUENE (SARA III)


CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 33%
OSHA PEL200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS

ISOBUTANE (PROPELLANT)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 15%

Hazards
Effects of Overexposure:INHALATION: ANETHESIA, HEADACHE, NAUSEA,
DIZZINESS, UNCONSCIOUSNESS, COMA.

First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER, SEE PHYSICIAN. SKIN:
WASH WITH SOAP & WATER. INHALATION: REMOVE TO FRESH AIR, IF NOT
BREATHING ADMINISTER ARTIFICIAL RESPIRATION.

Fire Fighting
Flash Point:NONE
Lower Limits:2.5%
Upper Limits:10%
Extinguishing Media:CO2, DRY CHEMICAL, OR FOAM.
Fire Fighting Procedures:SCBA W/FULL FACEPIECE OPERATED IN OTHER
POSITIVE PRESS MODE.
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE WITH AIR
BETWEEN UPPER & LOWER EXPLOSIVE LIMITS.

Accidental Release
Spill Release Procedures:ELIMINATE ALL IGINITION SOURCES. ABSORB
W/PAPER, FLOOR ABSORBENT OR SIMILAR MATERIAL TRANSFER TO HOOD.
PREVENT RUN-OFF TO SEWERS. AVOID BREATHING VAPORS. AVD CONTACT WITH
SKIN, EYES AND CLOTHING.

Handling
Handling and Storage Precautions:CAUTION: KEEP AWAY FROM SPARKS, OPEN
FLAMES, AND HIGH HEAT SOURCES. DON'T STORE >120F. DON'T PCTURE OR
INCINERATE.

Exposure Controls
Respiratory Protection:POSITIVE PRESSURE HOSE MASK OR ORGANIC CARTRIDGE
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:PVA/POLYETHYLEN

http://msdsreport.com/msds/BBSFR

Protective Gloves:PVA/POLYETHYLEN
Eye Protection:GOGGLES, FACESHIELD
Supplemental Safety and Health
MSDS DATE: 12/83. ALSO CONTAINS: PROPANE (PROPELLANT) (TX2275000) 15%,
SYNTHETIC RESINS (1001227SR) 9%, PIGMENT (1000046PI1%.

Chemical Properties
Boiling Pt:B.P. Text:NONE
Vapor Pres:50F
Vapor Density:>AIR
Spec Gravity:Evaporation Rate & Reference:NONE
Solubility in Water:NONE
Appearance and Odor:AEROSOL/LIQUID, MODERATE ODOR.
Percent Volatiles by Volume:92%

Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO/CO2, HYDROGEN CHLORIDE, PHOSGENE,
HYDROCARBONS.

Disposal
Waste Disposal Methods:ALLOW VOLATILE PORTION TO EVAPORATED IN HOOD.
DESTROY REMAINING MATERIAL BY INCINERATION OR DEPOSIT IN A LANDFILL
IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

You might also like