Professional Documents
Culture Documents
EUCO#460 EPOXY
SYSTEM
POLYSULFIDE ADHESIVE
EUCO#460 EPOXY SYSTEM is a 100% reactive, 2 component material designed as a moisture insensitive adhesive and binder for numerous application needs. This low modulus material
is available in a low viscosity (LV) medium viscosity (MV) or GEL consistency. EUCO#460 provides long working time when bonding dry or damp
concrete at temperature above 4oC.
FEATURES
l Excellent adhesive for bonding together
concrete, steel, ceramic or wood materials.
l Moisture insensitive for bonding to dry or
damp surfaces.
l Bonds fresh concrete toppings to hardened
concrete slabs.
l Protects concrete substrates against
chemical attack including most acids and
caustics.
l May be extended with sand or aggregate
for thick applications and mortar repairs.
l Summer or winter grade for meeting ambient temperature needs.
PRIMARY APPLICATION
APPLICATION
LV
Priming
x
Crack Injection
x
Sealing prous concrete x
Concrete Coating
Bonding Topping
Glue / Adhesive
Floor & Joint Repair
x
Bonding Irregular
Surface
Non-Sag Repairs
Vertical and Overhead
Repairs
Anchoring
MV
GEL
x
x
x
x
x
x
x
x
Components
and Yields
PRODUCT
Unit
Size
EUCO #460 LV
1 Gal.
(3.7 liter)
EUCO #460 MV
1 Gal.
(3.7 liter)
2.5
1.25
0.004
21.8
0.014
2.5
1.25
0.004
19
0.012
2.5
1.25
0.004
12
0.009
NOTE: All EUCO #460 formulation are mixed by volume at a 2 to 1 resin to hardener ratio. The portion
of part C, Euco Aggregate, is approximate and variations in aggregate requirement may be necessary
depending on application needs and ambient temperatures.
Application
Unit
Size
Priming*
Sealing*
Bonding*
Coating*
6.3 mm thick mortar repairs.
EUCO #460 LV
EUCO #460 MV
1 Gal.
(3.7 liter)
1 Gal.
(3.7 liter)
1 Gal.
(3.7 liter)
9.5 - 11
9.5 - 11
----2
----4.5 - 9.5
10 - 12.5
1.8
----5.65
7.5 - 9.5
1.3
*Note: Surface texture and roughness of concrete will have a significant effect on coverage rate.
CMCI
CMCI
CLEAN-UP
Tools and equipment may be cleaned with Euco
Solvent, xylene or aromatic solvents.
PRECAUTIONS AND LIMITATIONS
l Bring material as close as 21oC as possible. Store in room temperature environment 24 hours prior to use. Do not heat
with open flame.
l Do not apply over free standing water.
l Do not apply over hardened primer or old
epoxy without proper surface preparation.
l While properties of this product make it
suitable for use as a concrete coatings,
color uniformity may vary.