Professional Documents
Culture Documents
02625-1
2002-01-02
1/4
Technical description
SCOUT 7002 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with
a flexarm mounted control panel and rod handling
system. It drills vertical, inclined or horizontal holes
with a diameter of 64 -115 mm (2 -4 ) utilizing
38, 45 or 51 mm ( 1 , 1 or 2 ) extension rods.
SCOUT 7002 is equipped with HL 700, hydraulic top
hammer rock drill. With high rotation torque, sufficient
flushing and sophisticated ergonomic drilling control
system the rig is well suited also in very fractured rock
conditions. The rock drill and articulated boom are
mounted on the turnable superstructure giving a
2
2
drilling coverage of over 17,6 m (optionally 26,4 m ).
SANDVIK TAMROCK reserves the right to change this specification without further notice.
Scout 7002
Spec. no: 02625-1
2002-01-02
2/4
Drilling geometry
Vertical drilling
+3 m
+2 m
+1 m
90
-1 m
-2 m
30
-3 m
-4 m
Optional ( 90 )
Horizontal drilling
To the right
3300
3600
Transport dimensions
10800
SANDVIK TAMROCK reserves the right to change this specification without further notice.
7200
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120
Scout 7002
Spec. no: 02625-1
2002-01-02
3/4
Powerpack
Engine type
Max. tilt angles in all directions
Number of cylinders
Engine output
Transmission type
Hydraulic pumps
HL 700
38, 45, 51 mm
100-190 bar
55 Hz
19.5 kW
1 355 Nm
Air / oil mist
Air
245 kg
CF 145H + RH 714
7 700 mm
4 915 mm
5 485 mm (18 )
20 kN
Optional
Centralizing Pito 12H
RH 714
6+1
3 050, 3 660 or
4 265 mm
29 m
1350 mm
-56/+52 (-20/+94)
125
1 200 kg
Articulated boom
Boom type
Boom length
Drilling coverage on flat
Collaring height
Horizontal holes
DB 800
4.8 m
17.6 m2 (26.4 m2)
+2.5 m/-4.5 m
To the right
Carrier
Track type
Grouser plate width
Ground contact length
Ground pressure
Ground clearance
Turnable superstructure
Oscillation angles
Tramming force
Max. tramming speed
FL 6
310 mm
2 590 mm
2
0.79 kg/cm
440 mm
120
10
110 kN
3.5 km/h
8.1 m /min
4-10 bar
2 pcs, with ejector and
safety element
260 l
17-22 l/h
Standard
1 050 kg
Hydraulic system
Driving, boom and drilling
Cooling and dust collector
Filtration rate
Cooling capacity
Hydraulic oil tank
Shank lubrication device
Control system
Driving control
Boom control
Drilling
Rod handler
Collaring control
Percussion control
Antijamming system
Voltage
Control panel
Electric remote
Electric remote
Electric remote
Electric remote
Stepless
Controlled by feed
pressure
Hydraulic / electric
24 VDC
Mounted to flexarm
DC 700H
3
23 m /min at 1 000
mm vacuum H2O
10 pcs/fiber
2
8m
12 kW
190 kg
Transport dimensions
Weight (without options)
Width
Height
Total length
SANDVIK TAMROCK reserves the right to change this specification without further notice.
Caterpillar 3116 B
45
6
149 kW / 2 200 rpm
Gearbox
2 variable,
displacement piston,
two gear pumps
Enduro 25
13300 kg
2.45 m
3.6 m / 3.3 m
7.2 m / 10.8 m
Scout 7002
Spec. no: 02625-1
2002-01-02
4/4
Standard components
Selection of options
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Rock drill
Chain feed
Rod handler
Boom
Carrier
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
HL 700, hydraulic
CF 145H
RH 714 incl. 1 set of jaws
DB 800, articulated
Track mounted,
turnable superstructure
Powerpack
Diesel driven,
hydraulic pumps and
on-board compressor
Hydraulic system
Load sensing and
open center
Control system
TEC
Control panel
Mounted to flexarm
Dust collection system DC 700 H, hydraulic
Working lights
7 pcs
Gauge set
For accumulator pressure
checking
Back-up alarm
Manuals
Service and spare parts
manuals:
2 x paper copy
2 x CD-ROM (Toolman)
EU-safety devices
Drill steel
diameter
Recommended
hole diameter
1.
Extension
rods
38 mm
1 1/2
64 - 70 mm
2 1/2 - 2 3/4
2.
MF-rod
38 mm
1 1/2
64 - 70 mm
2 1/2 - 2 3/4
3.
Extension
rods
45 mm
1 3/4
76 - 89 mm
3 - 3 1/2
4.
MF-rod
45 mm
1 3/4
76 - 89 mm
3 - 3 1/2
5.
MF-rod
51 mm
2
89 - 115 mm
3 1/2 - 4 1/2
Note
SANDVIK TAMROCK reserves the right to change this specification without further notice.