Professional Documents
Culture Documents
Q1ans.pkt,
Q2ans.pkt,
answer.txt.
You should start assigning IP to the biggest subnet first, and others in
descending order of size. Use N/A to indicate a subnet not assigned to any
group.
Senior Student subnet has been done for you:
Last Octet of address in
Binary
From
To
0000 0000
0111 1111
Network
address
First host
address
Last host
address
Broadcast
address
Network
bits
Network mask
Assigned to
192.168.0.0
192.168.0.1
192.168.0.126
192.168.0.127
25
255.255.255.128
126
Senior Student
Download and use Q1.pkt to implement the USQ College network. Save your
work as Q1ans.pkt
Remember to switch off the router before adding modules, and switch on
again after adding modules.
Use copper straight through cables to connect PC and Switch, Switch and
router.
Use copper straight through cables to connect PC and Switch, Switch and
router.
Use serial cable (automatically choose connection type) to join routers.
After completion,
a)
PC11
PC21
PC31
PC41
can
can
can
can
ping
ping
ping
ping
PC12,
PC22,
PC32,
PC42,
Submit Q1ans.pkt, and put the subnet table and your answer to a) in
answer.txt.
LAN1: 192.168.0.0/24
LAN2: 192.168.1.0/24
LAN3: 2001:DB8:ACAD::/64
LAN4: 2001:DB8:FADE::/64
PC1 is in LAN1 with address 192.168.0.1.
PC2 is in LAN2 with address 192.168.1.1.
PC3 is in LAN3 with address 2001:DB8:ACAD::1.
PC4 is in LAN4 with address 2001:DB8:FADE::1.
Router G0/0 is in LAN1 with address 192.168.0.254 and in LAN3 with
address 2001:DB8:ACAD::2.
Router G0/1 in in LAN2 with address 192.168.1.254 and LAN4 with
address 2001:DB8:FADE::2.
Switch S1 is used to connect all LAN1 devices.
Switch S1 is also used to connect all LAN3 devices.
Switch S2 is used to connect all LAN2 devices.
Switch S2 is also used to connect all LAN4 devices.
a)
Implement the network topology using Packet Tracer and named it as
Q2ans.pkt.
b)
c)
Destination MAC
0003.E40D.A901
Source MAC
0006.2A8A.7CA1
Source IP
192.168.0.1
Destination IP
192.168.3.1
Source MAC
Source IP
Destination IP
Into S1
Out of S1
Into PC1
Destination MAC
Into PC1
a)
How many MAC does the 24 port Cisco switch used in the Packet Tracer
has?
b)
What is the use of the MAC and IP for VLAN 1 in a Cisco switch?
c)
Will the source and destination MAC for the PDU change when the PDU
moves along the path? If there is any change, describe the change(s) in less
than 50 words.
d)
Will the source and destination IP for the PDU change when the PDU
moves along the path? If there is any change, describe the change(s) in less
than 50 words.
Put your address tables and answers to a), b), c), d) in answer.txt.