Professional Documents
Culture Documents
English ( 2 10 )
Guide d'utilisation
Franais ( 20 29 )
Benutzerhandbuch
Deutsch ( 39 47 )
Appendix
English ( 48 50 )
Make sure all items listed in the Box Contents are included.
READ THE SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
Place the product in an appropriate location for operation.
Vortex Wireless Keytar
USB Wireless Receiver
USB Extension Cable
USB Cable
4 AA Batteries
Strap
Cable Harness
Ableton Live Lite Alesis Edition Software Disc
SONiVOX Vortex-I (download)
Ignite (download)
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.) and product
registration, visit alesis.com/vortex-wireless.
For additional product support, visit alesis.com/support.
Computer*
USB
Wireless
Receiver
Synthesizer*
*Sold separately
Footswitch*
1.
2.
3.
Features
Neck Top Panel
10 11 12 14 15
TIL T
PATCH EDIT
13
1
2
SPLIT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PROGRAM
SET
BANK
MSB
BANK
LSB
MIDI
CHANNEL
16
MODE
ASSIGN
UPPER
KEYBOARD ZONES
CAL
ACCEL
17
2 3 4
8
7
6
LOWER
EDIT
ACCEL
4
2
Sustain Button All notes played on Vortex will sustain while this button is pressed until the button is
released.
3 messages.
Ribbon Controller Touch-sensitive strip that 1
sends MIDI
To set how Ribbon Controller works in a
5
patch, see the Editing the Knobs, Slider, Accelerometer, or Ribbon section of this manual.
Octave Down Press this button to shift the keyboard's octave range down.
Octave Up Press this button to shift the keyboard's octave range up.
Ribbon Control Buttons Sets the type of MIDI message to be sent by the Ribbon Controller. To set how
Ribbon Control buttons work in a patch, see Editing the Knobs, Slider, Accelerometer, or Ribbon
Controller section of this manual.
Pitch Wheel Transmits MIDI Pitch Bend information to raise or lower the pitch of a note temporarily. To set
the orientation of the pitch wheel, see the Editing the Pitch Wheel section of this manual.
Slider Sends MIDI data for the currently assigned parameter. To set how Slider works in a patch, see the
Editing the Knobs, Slider, Accelerometer, or Ribbon Controller section of this manual.
Keyboard Zone Buttons Press these buttons to enter the various keyboard zones. To set how the Keyboard
Zone buttons work in a patch, see Editing the Keyboard Zones section of this manual.
Keyboard Velocity-sensitive keys with aftertouch for sending MIDI notes. Use the keys to manually enter
values in Patch Edit mode.
Cal Accel (Calibrate Accelerometer): Resets the accelerometer to factory default settings.
Bank LSB (Least Significant Byte): Sends Bank LSB CC messages.
Bank MSB (Most Significant Byte): Sends Bank MSB CC messages.
Program Set: Stores the program # (0 127) into the patch.
MIDI Channel: Assigns the MIDI channel for various controls.
Mode Assign: Assigns the mode in which controls operate.
Edit Accel (Edit Accelerometer): Allows you to edit the accelerometer MIDI messages.
Display Shows the data, values, settings, and various Vortex Wireless functions.
Start/Stop Button Transport control button to toggle a MIDI Start/Stop message, or a CC message. The LED
will light up when a Play command is sent and will turn off when a Stop command is sent. To set how the
Start/Stop button works in a patch, see the Editing the Start/Stop Button section of this manual.
Program Change Up/Down Sends program change messages to your computer software or MIDI device.
Hold either button to scroll through 10 programs at a time.
Note: Vortex Wireless will not send a program change message until the Up/Down buttons are released.
Patch Edit Button Press this button to toggle between Patch Edit and Performance Mode.
Note: The three Patch Select LEDs will be lit when in this mode.
Patch Select Press this button and use the drum pads to select an onboard patch.
Knobs Sends various MIDI messages when turned. Each knob can be individually assigned to a different
MIDI parameter. To set how the knobs work in a patch, see the Editing the Knobs, Slider, Accelerometer, or
Ribbon Controller section of this manual.
Trigger/Drum Pads Press the pads to send MIDI messages or use the Patch Select button along with the
pads to select onboard patches. To set how the pads work in a patch, see the Editing the Pads section of this
manual.
Strap Button Use the included guitar-style strap for added stability when playing.
Side Panel
1.
8
7
2.
3.
4.
5.
Bottom Panel
1.
2.
3.
3
1
Visit the Alesis Vortex-Wireless support page to download the SONiVOX Vortex-I DVi at alesis.com/vortexwireless.
Press Patch Select until the LED located next to C is lit.
Press P7 (Pad 7) within 5 seconds. The display screen will show P23 when the correct patch is selected.
After following this procedure, your DVi will be mapped to Vortex Wirelesss controls when the Vortex DVi is opened.
1.
2.
3.
4.
Insert the included DVD into your computer's DVD drive, open the "setup" application or .exe (Windows) or
.mpkg file (Mac), and then follow the on-screen instructions to install the software.
Connect Vortex Wireless to your computer and power on the unit.
Open the Ableton Live Lite software.
To map Vortex Wireless with Ableton Live Lite, See the Using the Vortex Wireless with Software section of
the manual.
Visit alesis.com/vortex-wireless, Click on Docs & Downloads, and download and install the Vortex Ableton
Live Controller Map.
Press Patch Select until the LED located next to A is lit.
Press P1 (Pad 1) within 5 seconds. The display screen will show P1 when the correct patch is selected.
Ignite
We recommend downloading Ignite, a music creation tool designed by AIR Music Technology to be easiest way to
capture, build, and share musical ideas. Ignite works well on its own or as a writing companion to the production
capabilities of your DAW.
Visit airmusictech.com/getignite to download and install your copy of Ignite.
Vyzex Vortex
A software based patch editor is availble for easy point-and-click editing of your Vortex Wirelesss patches. For more
information, please visit the Alesis Vortex Wireless support page at alesis.com/vortex-wireless.
Modes
Performance Mode
PF will be displayed on the LED display screen when Vortex is in performance mode. In this mode, MIDI data can be
transmitted at any time from Vortex.
Loading Patches
A Vortex Wireless patch is a preset that you can load or edit.
When you load a patch, a program change message will be sent through the USB port and 5-pin MIDI Out port. See
the Editing Program Change Messages section to learn how to set this.
There are three patch banks to select from (A, B, and C) on Vortex Wireless.
1.
2.
Press the Patch Select button to cycle through patch banks. The corresponding bank LED will be lit.
Use the Trigger/Drum pads to select the patch to load. Alternately, you can quickly select the next or previous
patch by pressing Patch Select then immediately pressing Program Up or Program Down.
You can also use the Vyzex Vortex patch editor software to edit your patches.
Below is a reference chart of all available modes for a pad as well as the available parameters for each pad mode.
Mode
Assigned Knob
Function
Note
Knob #1
Knob #2
Knob #3
Knob #1
CC # (0 127)
Knob #2
Knob #3
Knob #1
CC # (0 127)
Knob #2
Knob #3
Knob #1
Knob #2
Knob #3
n/a
CC Toggle
CC Momentary
Program Change
Panic Mode
3.
4.
5.
3.
4.
3.
4.
5.
Below is a reference chart of all available modes for the knobs, slider, accelerometer, and ribbon controller, as well as
the available parameters that can be edited for these controls.
Mode
Assigned Knob
Function
CC Message
Knob #1
CC # (0 127)
Knob #2
Pitch Bend
Aftertouch
Knob #3
Knob #1
Knob #2
Knob #3
Knob #1
Knob #2
Knob #3
Below is a reference chart of all available modes for the Start/Stop button, as well as the available parameters that
can be edited for this control.
Mode
Assigned Knob
Function
Knob #1
Change Mode
(0 63) Realtime MIDI Mode
(64 127) CC Mode
Knob #2
No effect
Knob #3
No effect
Knob #1
Change Mode
(0 63) Realtime MIDI Mode
(64 127) CC Mode
Knob #2
Knob #3
CC Mode
To set the LSB (Least Significant Byte) and MSB (Most Significant Byte):
1.
2.
3.
4.
Resetting Patches
To restore all of Vortex Wirelesss patches to their default settings:
1.
2.
3.
4.
10
Asegrese de que estn presentes todos los elementos enumerados en Contenido de la caja.
LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO.
Coloque el producto en un lugar adecuado para su funcionamiento.
Vortex Wireless Keytar
Receptor inalmbrico USB
Cable de extensin USB
USB Cable
4 pilas AA
Correa
Manojo de cable
Disco de software Ableton Live Lite Alesis Edition
Vortex-I de SONiVOX (para descargar)
Ignite (para descargar)
Gua del usuario
Manual sobre la seguridad y garanta
Soporte
Para obtener la informacin ms completa acerca de este product (los requisitos del sistema, compatibilidad, etc) y
registro del producto, visite alesis.com/vortex-wireless.
Para soporte adicional del producto, visite alesis.com/support.
Receptor
inalmbrico
USB
Sintetizador*
1.
2.
3.
11
Caractersticas
Panel superior
10 11 12 14 15
TIL T
PATCH EDIT
13
1
2
SPLIT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PROGRAM
SET
BANK
MSB
BANK
LSB
MIDI
CHANNEL
16
MODE
ASSIGN
UPPER
KEYBOARD ZONES
CAL
ACCEL
17
2 3 4
8
7
6
LOWER
EDIT
ACCEL
12
Panel lateral
1.
8
7
2.
3.
4.
5.
Panel inferior
1.
2.
3.
3
1
Visite primero la pgina de soporte de Alesis Vortex para bajar el SONiVOX Vortex-I DVi en
alesis.com/vortex-wireless.
Pulse Patch Select hasta que se encienda el LED ubicado junto a la C.
Pulse P7 (Pad 7) dentro de los 5 segundos. Cuando se selecciona el patch correcto, aparece P23 en la
pantalla.
Despus de seguir este procedimiento, su DVi quedar mapeado con los controles del Vortex Wireless cuando se
abra Vortex DVi.
Inserte el DVD incluido en la lectora de DVD de su computadora, abra la aplicacin "setup" (instalacin) o el
archivo .exe (Windows) o .mpkg (Mac), y luego siga las instrucciones de la pantalla para instalar el software.
Conecte el Vortex Wireless a su computadora y encienda la unidad.
Abra el software Ableton Live Lite.
Para correlacionar el Vortex Wireless con Ableton Live Lite, consulte la seccin Cmo usar el Vortex
Wireless con Software de este manual.
Visite alesis.com/vortex-wireless, haga clic en Docs & Downloads (Documentos y descargas) y baje e
instale el Vortex Ableton Live Controller Map (Mapa de controladores de Vortex Ableton Live).
Pulse Patch Select hasta que se encienda el LED ubicado junto a la A.
Pulse P1 (Pad 1) dentro de los 5 segundos. Cuando se selecciona el patch correcto, aparece P1 en la
pantalla.
Ignite
Recomendamos descargar Ignite, una herramienta de creacin musical diseada por AIR Music Technology para
que sea la manera ms fcil de capturar, crear y compartir ideas musicales. Ignite funciona bien en forma autnoma
o como acompaante de composicin de las capacidades de produccin de su DAW.
Visite airmusictech.com/getignite para descargar e instalar su ejemplar de Ignite.
13
Vyzex Vortex
Se dispone de un editor de parches basado en software para facilitar la edicin tipo sealar y hacer clic de los
parches del Vortex Wireless. Para ms informacin, visite la pgina de soporte de Alesis Vortex Wireless en
alesis.com/vortex-wireless.
Modos
Modo interpretacin
Cuando el Vortex est en modo de interpretacin, aparece PF en la pantalla de LED. En este modo, los datos MIDI
se pueden transmitir en cualquier momento desde el Vortex.
Pulse el botn Patch Select para recorrer los bancos de parches. Se enciende el LED correspondiente.
Use los pads de disparo/batera para seleccionar el parche a cargar. Como alternativa, puede seleccionar
rpidamente el parche siguiente anterior pulsando Patch Select (Seleccin de patch) y luego inmediatamente
Program Up (Subir por el programa) o Program Down (Bajar por el programa).
Edicin de parches
Cmo cargar parches
Pulse el botn Patch Edit para entrar a este modo. Cuando la unidad est en este modo, se encienden los tres LED
Patch Select y aparece PE en la pantalla. Este modo permite ajustar los valores de los mensajes MIDI. Para salir del
modo Patch Edit y guardar todos los ajustes, pulse otra vez el botn Patch Edit.
El Vortex Wireless le permite guardar y recuperar hasta 23 parches diferentes.
1.
2.
3.
4.
5.
Tambin puede usar el software editor de patch Vyzex Vortex para editar sus parches.
14
4.
Se agrega a continuacin una tabla de referencia de todos los modos disponibles para un pad, como tambin todos
los parmetros disponibles para cada modo de pad.
Modo
Perilla asignada
Funcin
Note (Nota)
Perilla n 1
Perilla n 2
Perilla n 3
Perilla n 1
CC n (0 127)
Perilla n 2
Perilla n 3
CC Toggle
(Conmutacin de CC)
CC Momentary (CC
momentneo)
Program Change
(Cambio de programa)
Panic Mode
pnico)
(Modo
Perilla n 1
CC n (0 127)
Perilla n 2
Perilla n 3
Perilla n 1
Perilla n 2
Perilla n 3
n/a
15
3.
4.
5.
3.
4.
3.
4.
5.
16
5.
5.
Se incluye a continuacin una tabla de referencia de todos los modos disponibles para las perillas, cursor,
acelermetro y controlador de cinta, as como los parmetros disponibles que se pueden editar correspondientes a
estos controles.
Modo
Perilla asignada
Funcin
CC Message
(Mensaje CC)
Perilla n 1
CC n (0 127)
Aftertouch (Post
pulsacin)
Perilla n 2
Mn rango (0 127)
Perilla n 3
Mx rango (0 127)
Perilla n 1
Perilla n 2
Mn rango (0 127)
Perilla n 3
Mx rango (0 127)
Perilla n 1
Perilla n 2
Mn rango (0 127)
Perilla n 3
Mx rango (0 127)
17
5.
6.
Se incluye a continuacin una tabla de referencia de todos los modos disponibles para el botn Start/Stop, as como
los parmetros que pueden editarse correspondientes a este control.
Modo
Perilla asignada
Funcin
Perilla n 1
Modo de cambio
(0 63) Modo MIDI en tiempo real
(64 127) Modo CC
Perilla n 2
Sin efectos
Perilla n 3
Sin efectos
Perilla n 1
Modo de cambio
(0 63) Modo MIDI en tiempo real
(64 127) Modo CC
Perilla n 2
Perilla n 3
18
Para cambiar el mensaje de volumen predeterminado enviado cuando se selecciona una zona:
1.
2.
3.
4.
Para configurar el LSB (byte menos significativo) y el MSB (byte menos significativo):
1.
2.
3.
4.
19
Assurez-vous que tous les articles numrs dans le contenu de la bote de ce guide sont inclus dans la bote.
VEUILLEZ LIRE LE LIVRET DES CONSIGNES DE SCURIT AVANT D'UTILISER LE PRODUIT.
Placez le produit dans un endroit appropri son utilisation.
Vortex Wireless Keytar
Rcepteur sans fil USB
Cble de prolongation USB
Cble USB
4 piles de format AA
Courroie
Harnais de cblage
Disque du logiciel Ableton Live Lite Alesis Edition
Vortex-I de SONiVOX (tlchargement)
Ignite (tlchargement)
Guide d'utilisation
Consignes de scurit et informations concernant la garantie
Assistance
Pour les dernires informations concernant ce produit (la configuration systme minimale requise, la compatibilit,
etc) et lenregistrement du produit, veuillez visitez le site alesis.com/vortex-wireless.
Pour de plus amples informations, visitez alesis.com/support.
Ordinateur*
Rcepteur
sans fil USB
Synthtiseur*
*Vendu sparment
Pdale*
1.
2.
3.
20
Fonctions
Manche panneau suprieur
10 11 12 14 15
TIL T
PATCH EDIT
13
1
2
SPLIT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
PROGRAM
SET
BANK
MSB
BANK
LSB
MIDI
CHANNEL
16
MODE
ASSIGN
UPPER
KEYBOARD ZONES
CAL
ACCEL
17
2 3 4
8
7
6
LOWER
EDIT
ACCEL
4
2
Touche Sustain Lorsque cette touche est enfonce, toutes les notes joues sur le Vortex seront maintenues jusqu
ce quelle soit relche.
1 envoie
3 des messages
5
Contrleur effleurement Barre d'effleurement qui
MIDI. Pour dfinir comment le contrleur
effleurement fonctionne dans une patch, veuillez consulter la section Modification des boutons, du potentiomtre, de
lacclromtre et du contrleur effleurement de ce guide.
Touche Octave Down Cette touche vous permet de baisser la plage d'octaves du clavier.
Touche Octave Up Cette touche vous permet de hausser la plage d'octaves du clavier.
Touches Ribbon Modes Ces touches permettent de slectionner le type de message MIDI envoy par la barre
deffleurement. Pour dfinir comment les touches du contrleur effleurement fonctionnent dans une patch, veuillez
consulter la section Modification des boutons, du potentiomtre, de lacclromtre et du contrleur
effleurement de ce guide.
Molette de modulation de la hauteur tonale Cette molette transmet des donnes MIDI concernant laugmentation ou
la rduction temporaire de la vitesse de lecture. Pour dfinir l'orientation de la molette de modulation de la hauteur
tonale, veuillez consulter la section Modification de la molette de modulation de la hauteur tonale de ce guide.
Potentiomtre glissire Transmet les donnes MIDI pour le paramtre assign en cours. Pour dfinir comment le
potentiomtre fonctionne dans une patch, veuillez consulter la section Modification des boutons, du potentiomtre,
de lacclromtre et du contrleur effleurement de ce guide.
Touches Keyboard Modes Ces touches permettent daccder aux diverses zones du clavier. Pour dfinir comment
les touches des zones du clavier fonctionnent dans une patch, veuillez consulter la section Modification des zones du
clavier de ce guide.
Clavier Touches sensibles la dynamique avec fonction aftertouch pour transmettre des notes MIDI. Utilisez les
touches afin dentrer manuellement les valeurs en mode Patch Edit.
Cal Accel (talonnage de lacclromtre) : Ceci permet de rinitialiser les rglages dusine par dfaut.
Bank LSB (bit le moins significatif) : Ceci permet de transmettre des messages Bank LSB CC (messages
continus).
Bank MSB (bit le plus significatif) : Ceci permet de transmettre des messages Bank MSB CC (messages
continus).
Program Set : Enregistre le numro de programme (0 127) dans la patch.
MIDI Channel : Ceci permet dassigner un canal MIDI pour diffrentes commandes.
Mode Assign : Ceci permet dassigner le mode dans lequel les commandes fonctionnent.
Edit Accel (modification de lacclromtre) : Ceci vous permet dapporter des modifications aux messages
MIDI de lacclromtre.
cran daffichage Cet cran affiche les donnes, les valeurs, les rglages et les diffrentes fonctions du Vortex
Wireless.
Touche Start/Stop Touche de commande pour lancer/arrter un message MIDI ou CC. La DEL s'allume lorsqu'une
commande de lecture est transmise et s'teint lorsqu'une commande d'arrt est transmise. Pour dfinir comment la
touche Start/Stop fonctionne dans une patch, veuillez consulter la section Modification de la touche Start/Stop de ce
guide.
Touches Program Up/Down Ces touches transmettent des messages de changement de programme votre logiciel
ou votre appareil MIDI. Maintenez une des touches afin de parcourir 10 programmes la fois.
Remarque : Le Vortex Wireless ne transmet aucun message de changement de programme avant que la touche ne soit
relche.
Touche Patch Edit Cette touche permet de commuter entre les modes Patch Edit et Performance.
Remarque : Les trois DEL Patch Select sallument lorsque ce mode est slectionn.
Touche Patch Select Enfoncez et utilisez les pads de batterie afin de slectionner une des patches intgres. Le pad
de la patches slectionne sallume.
15.
Boutons Ces boutons permettent de transmettre diffrents messages MIDI lorsquils sont tourns. Chaque
bouton peut tre assign un paramtre MIDI diffrent. Appuyez sur cette touche et utilisez les pads pour
slectionner une patch intgre. Pour dfinir comment les boutons fonctionnent dans une patch, veuillez
consulter la section Modification des boutons, du potentiomtre, de lacclromtre et du contrleur
effleurement de ce guide.
16.
Pad de dclenchement/de batterie Enfoncez les pads afin de transmettre des messages MIDI ou utilisez la touche
Patch Select avec les pads afin de slectionner une des patches intgres. Pour dfinir comment les pads fonctionnent
dans une patch, veuillez consulter la section Modification des pads de ce guide.
Borne pour courroie Cette borne permet dattacher la courroie de guitare pour plus de stabilit.
17.
21
1
5
Panneau arrire
1.
2.
3.
4.
5.
2 3
6
8
7
Panneau latral
1.
2.
3.
3
1
Dabord, vous devez visiter le site d'assistance technique d'Alesis pour le Vortex Wireless au
alesis.com/vortex-wireless afin de tlcharger SONiVOX Vortex-I DVi.
Appuyez sur Patch Select jusqu ce que la DEL prs de C sallume.
Appuyez sur P7 (Pad 7) en dedans de 5 secondes. Lorsque la patch correspondante est slectionne,
P23 saffiche.
Une fois cette procdure effectue, les commandes du Vortex Wireless seront affectes aux DVi lorsque celui-ci est
lanc.
Insrez le DVD dinstallation dans le lecteur DVD de votre ordinateur, ouvrez lapplication dinstallation ou le
fichier .exe (Windows) ou .mpkg (Mac), puis suivez les instructions lcran pour continuer linstallation.
Branchez le Vortex Wireless votre ordinateur et mettez l'appareil sous tension.
Lancez le logiciel Ableton Live Lite.
Pour mapper le Vortex Wireless au Ableton Live Lite, veuillez consulter la section Utilisation du Vortex
Wireless avec le logiciel de ce guide.
Visit alesis.com/vortex-wireless, Click on Docs & Downloads, and download and install the Vortex Wireless
Ableton Live Controller Map.
Press Patch Select until the LED located next to A is lit.
Press P1 (Pad 1) within 5 seconds. The display screen will show P1 when the correct patch is selected.
Ignite
Nous vous recommandons de tlcharger le logiciel Ignite, un outil de cration musicale conu par AIR Music
Technology afin de faciliter la saisie, le peaufinage et le partage des ides musicales. Il peut tre utilis seul ou en
guise de complment dcriture votre logiciel audionumrique.
Veuillez visiter airmusictech.com/getignite pour tlcharger et installer votre copie dIgnite.
22
Vyzex Vortex
Un logiciel ddition de patch convivial de style pointer et cliquer est disponible pour faciliter la modification des
patchs du Vortex Wireless. Pour plus dinformation, veuillez visiter la page d'assistance d'Alesis pour le Vortex
Wireless alesis.com/vortex-wireless.
Modes
Mode Performance
PF s'affiche sur l'cran d'affichage DEL lorsque le Vortex est en mode Performance. En ce mode, les donnes MIDI
peuvent tre transmises en tout temps du Vortex.
Appuyez sur la touche Patch Select afin de parcourir les banques de patches. La DEL de banque
correspondante devrait sallumer.
Utilisez les pads afin de slectionner la patch charger. Vous pouvez galement slectionner rapidement la
patch suivante ou prcdente en appuyant sur Patch Select, puis appuyer immdiatement sur Program Up ou
Program Down.
Vous pouvez galement utiliser le logiciel ddition de patch Vyzex Vortex pour modifier vos patchs.
23
4.
24
Voici un tableau de rfrence de tous les modes disponibles pour un pad ainsi que les paramtres disponibles pour
chaque mode de pad.
Mode
Bouton assign
Fonction
Note
Bouton no 1
Bouton no 2
Bouton no 3
CC Toggle
CC Momentary
Program Change
Panic Mode
Bouton no 1
CC # (0 127)
Bouton no 2
Bouton no 3
Bouton no 1
CC # (0 127)
Bouton no 2
Bouton no 3
Bouton no 1
Bouton no 2
Bouton no 3
s/o
3.
4.
5.
25
3.
4.
3.
4.
5.
5.
26
5.
Voici un tableau de rfrence de tous les modes disponibles pour les boutons, le potentiomtre, lacclromtre et le
contrleur effleurement, ainsi que les paramtres disponibles qui peuvent tre modifis pour ces commandes.
Mode
Bouton assign
Fonction
CC Message
Bouton no 1
CC # (0 127)
Bouton no 2
Bouton no 3
Bouton no 1
Bouton no 2
Bouton no 3
Bouton no 1
Bouton no 2
Bouton no 3
Pitch Bend
Aftertouch
5.
6.
27
Voici un tableau de rfrence de tous les modes disponibles pour la touche Start/Stop, ainsi que les paramtres qui
peuvent tre modifis pour cette commande.
Mode
Bouton assign
Fonction
Bouton no 1
Changement de mode
(0 63) mode Realtime MIDI
(64 127) mode CC
Bouton no 2
Aucun effet
Bouton no 3
Aucun effet
Bouton no 1
Changement de mode
(0 63) mode Realtime MIDI
(64 127) mode CC
Bouton no 2
Bouton no 3
CC Mode
4.
Pour modifier le message de volume par dfaut envoy lorsqu'une zone est slectionne :
1.
2.
3.
4.
28
Pour rgler le bit le moins significatif (LSB - Least Significant Byte) et le bit le plus significatif (MSB - Most
Significant Byte) :
1.
2.
3.
4.
29
Assicurarsi che tutti gli elementi elencati nella parte Contenuti della confezione siano inclusi.
LEGGERE ATTENTAMENTE IL LIBRETTO DELLE ISTRUZIONI DI SICUREZZA PRIMA DI UTILIZZARE IL
PRODOTTO.
Collocare il prodotto in una posizione adeguata alluso.
Vortex Wireless Keystar
Ricevitore USB Wireless
Cavo di prolunga USB
Cavo USB
4 batterie AA
Fascia
Cablaggio
Disco del software Ableton Live Lite Alesis Edition
Vortex-I di SONiVOX (download)
Ignite (download)
Guida per l'uso
Istruzioni di sicurezza e garanzia
Assistenza
Per conoscere le ultime informazioni in merito a questo prodotto (i requisiti di sistema complete, compatibilit, ecc) e
per la registrazione del prodotto, recarsi alla pagina alesis.com/vortex-wireless.
Per ulteriore assistenza, recarsi alla pagina alesis.com/support.
Computer*
Ricevitore
USB
Wireless
Sintetizzatore*
*Venduti separatamente
Interruttore a
pedale*
1.
2.
3.
30
Funzioni
Collo pannello superiore
1.
PATCH EDIT
EDIT
ACCEL
2.
1
2
3.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
SPLIT
UPPER
KEYBOARD ZONES
4.
2 3 4
8
7
6
LOWER
31
CAL
ACCEL
PROGRAM
SET
BANK
MSB
BANK
LSB
MIDI
CHANNEL
MODE
ASSIGN
Pannello laterale
1.
8
7
2.
3.
4.
5.
Pannello posteriore
1.
2.
3.
3
1
Innanzitutto visitare la pagina di assistenza di Alesis Vortex Wireless per scaricare SONiVOX Vortex-I DVi
all'indirizzo alesis.com/vortex-wireless.
Premere Patch Select (seleziona patch) fino a quando il LED accanto a C non si accende.
Premere P7 (Pad 7) entro 5 secondi. Quando viene selezionata la patch corretta, a display compare P23.
Dopo aver seguito questa procedura, il DVi sar mappato sui comandi del Vortex Wireless quando il Vortex DVi viene
aperto.
Inserire il DVD in dotazione nel lettore DVD del computer, aprire l'applicazione "setup" o il file .exe (Windows) o
.mpkg (Mac), quindi seguire le istruzioni su schermo per installare il software.
Collegare il Vortex Wireless al computer e accenderlo.
Aprire il software Ableton Live Lite.
Per mappare il Vortex Wireless con Ableton Live Lite, si veda la sezione Uso del Vortex Wireless con
Software del manuale.
32
Ignite
Consigliamo di scaricare Ignite, uno strumento di creazione musicale concepito da AIR Music Technology per essere
il modo pi facile di captare, costruire e condividere idee musicali. Ignite funziona bene da solo o affiancato alle
capacit produttive del vostro DAW.
Recarsi alla pagina airmusictech.com/getignite per scaricare e installare la propria copia di Ignite.
Vyzex Vortex
Un editor di patch basato su software disponibile per una comoda modifica "punta e clicca" delle patch del Vortex
Wireless. Per maggiori informazioni, recarsi alla pagina di assistenza di Alesis Vortex Wireless all'indirizzo
alesis.com/vortex-wireless.
Modalit
Modalit Performance
PF comparir sullo schermo a LED quando il Vortex in modalit prestazioni (performance). In questa modalit, i dati
MIDI possono essere trasmessi in qualsiasi momento dal Vortex.
Premere il tasto Patch Select per passare da un banco patch all'altro. Il corrispondente LED del banco sar
acceso.
Servirsi dei pad Trigger/Drum per selezionare la patch da caricare. Alternativamente, si pu selezionare
rapidamente la patch successiva o precedente premendo seleziona patch (Patch Select), quindi premendo
immediatamente Program Up o Program Down.
Si pu anche utilizzare il software di modifica patch Vyzex Vortex per modificare le patch.
33
4.
Segue uno schema di riferimento di tutte le modalit disponibili per ogni pad, nonch di tutti i parametri disponibili per
ciascuna modalit pad.
Modalit
Manopola assegnata
Funzione
Nota bene
Manopola 1
Manopola 2
Manopola 3
Manopola 1
CC # (0 127)
Manopola 2
Manopola 3
CC Toggle
CC Momentary
Modifica Programma
Modalit Panic
Manopola 1
CC # (0 127)
Manopola 2
Manopola 3
Manopola 1
Manopola 2
Manopola 3
n/d
34
3.
4.
5.
3.
4.
3.
4.
5.
35
5.
5.
Qui di seguito troverete uno schema di riferimento di tutte le modalit disponibili per le manopole, il cursore,
l'accelerometro e il controller a nastro, nonch i parametri disponibili che possono essere modificati per tali comandi.
Modalit
Manopola
assegnata
Messaggio CC
Manopola 1
CC # (0 127)
Manopola 2
Manopola 3
Manopola 1
Manopola 2
Manopola 3
Aftertouch
Funzione
Manopola 1
Manopola 2
Manopola 3
36
5.
6.
Qui di seguito troverete uno schema di riferimento di tutte le modalit disponibili per il pulsante Start/Stop nonch i
parametri disponibili che possono essere modificati per tale comando.
Modalit
Manopola
assegnata
Funzione
Modalit
Realtime MIDI
Manopola 1
Modifica modalit
(0 63) Modalit Realtime MIDI
(64 127) Modalit CC
Manopola 2
Nessun effetto
Modalit CC
Manopola 3
Nessun effetto
Manopola 1
Modifica modalit
(0 63) Modalit Realtime MIDI
(64 127) Modalit CC
Manopola 2
Manopola 3
Premere il tasto Split. Il punto di divisione attuale comparir sul display a LED.Premere il pulsante Split. Il
punto di divisione attuale comparir sul display a LED.
Premere il tasto sulla tastiera che si desidera utilizzare come punto di divisione per dividere la tastiera stessa.
Premere il tasto Invio per salvare o il tasto Canc per tornare alla configurazione originaria.
37
Per impostare il canale MIDI della zona superiore o inferiore della tastiera:
1.
2.
3.
4.
Per impostare la curva di velocit della zona superiore o inferiore della tastiera:
1.
2.
3.
4.
Per modificare il messaggio volume predefinito inviato quando si seleziona una zona:
1.
2.
3.
4.
Per impostare LSB (Least Significant Byte - byte meno significativo) ed MSB (Most Significant Byte - byte pi
significativo):
1.
2.
3.
4.
38
Benutzerhandbuch (Deutsch)
Einfhrung
Lieferumfang
1.
2.
3.
Stellen Sie sicher, dass alle im Lieferumfang aufgelisteten Teile in der Verpackung enthalten sind.
LESEN SIE DIE SICHERHEITSHINWEISE, BEVOR SIE DAS PRODUKT VERWENDEN.
Stellen Sie das Gert an einen fr den Betrieb geeigneten Standort.
Vortex Wireless Keytar
Drahtloser USB-Empfnger
USB-Verlngerungskabel
Kabel USB
4 AA-Batterien
Gurt
Kabel-Geschirr
Ableton Live Lite Alesis Edition Software-Disc
SONiVOX Vortex-I (Download)
Ignite (Download)
Benutzerhandbuch
Sicherheitshinweise und Garantieinformationen
Kundendienst
Die neuesten Informationen zu diesem Produkt (Systemanforderungen, Kompatibilittsinformationen usw.) und die
Registrierung Ihres Produkts finden Sie auf alesis.com/vortex-wireless.
Fr zustzlichen Produkt-Support besuchen Sie alesis.com/support.
Schnellstart / Anschlussdiagramm
Computer*
Drahtloser
USBEmpfnger
Synthesizer*
*Separat erhltlich
1.
2.
3.
Fuschalter*
39
Funktionen
Hals - Oberseite
10 11 12 14 15
TIL T
PATCH EDIT
13
1
2
SPLIT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PROGRAM
SET
BANK
MSB
BANK
LSB
MIDI
CHANNEL
16
MODE
ASSIGN
UPPER
KEYBOARD ZONES
CAL
ACCEL
17
2 3 4
8
7
6
LOWER
EDIT
ACCEL
4
Sustain-Taste Alle am Vortex gespielten Noten werden
solange
gehalten wie die Taste gedrckt bleibt.
2
Ribbon Controller Berhrungsempfindlicher Controller, der MIDI-Befehle sendet. Um einzustellen, wie der
Ribbon Controller in einem Patch funktioniert, 1lesen Sie
3 bitte
5 den Abschnitt Bearbeiten von Drehreglern,
Schiebereglern oder Ribbon Controller in diesem Handbuch.
Oktave tiefer (Octave Down) Drcken Sie diese Taste, um den Oktavenbereich des Keyboards nach unten
zu bewegen.
Oktave hher (Octave Up) Drcken Sie diese Taste, um den Oktavenbereich des Keyboards nach oben zu
bewegen.
Ribbon Control Tasten Legen den MIDI-Befehlstyp fest, der vom Ribbon Controller gesendet werden soll.
Um einzustellen, wie die Ribbon Control Tasten in einem Patch funktionieren, lesen Sie bitte den Abschnitt
Bearbeiten von Drehreglern, Schiebereglern, Akzelerometern oder Ribbon Controller in diesem
Handbuch.
Pitch-Bend Rad bertrgt MIDI Pitch Bend-Informationen zum vorbergehenden Anheben oder Absenken
der Tonhhe einer Note. Um zu erfahren wie Sie das Pitch-Rad einstellen, lesen Sie bitte den Abschnitt
Bearbeiten des Pitch-Rads in diesem Handbuch.
Schieberegler Sendet MIDI-Daten fr den aktuell zugewiesenen Parameter. Um einzustellen, wie der
Schieberegler in einem Patch funktioniert, lesen Sie bitte den Abschnitt Bearbeiten von Drehreglern,
Schiebereglern, Akzelerometern oder Ribbon Controller in diesem Handbuchs.
Zonen-Tasten des Keyboards - Drcken Sie diese Tasten, um die verschiedenen Keyboard-Zonen
einzugeben. Um einzustellen, wie die Keyboard-Zonentasten in einem Patch funktionieren, lesen Sie bitte den
Abschnitt Bearbeiten der Keyboard-Zonen in diesem Handbuch.
Keyboard Velocity-Tasten mit Aftertouch fr das Senden von MIDI-Noten. Mit den Tasten knnen Sie Werte
manuell im Modus Patch Bearbeiten eingeben.
Cal Accel: Setzt den Akzelerometer auf die Werkseinstellung zurck.
Bank LSB (niedrigstwertiges Byte): Sendet Bank LSB CC-Nachrichten.
Bank MSB (hchstwertiges Byte): Sendet Bank MSB CC-Nachrichten.
Programm einstellen: Speichert das Programm # (0 - 127) im Patch.
MIDI-Kanal: Weist dem MIDI-Kanal verschiedenen Steuerungen zu.
Modus zuweisen: Weist den Modus zu, in dem die Controls betrieben werden.
Edit Accel: Ermglicht es Ihnen, die MIDI-Befehle des Akzelerometers zu bearbeiten.
Anzeige Zeigt die Daten, Werte, Einstellungen und verschiedenen Vortex Wireless-Funktionen.
Taste Start/Stopp Verwenden Sie die Transporttaste zum Umschalten zwischen einer MIDI Start/StoppNachricht oder einer CC-Nachricht. Die LED leuchtet auf, wenn ein Wiedergabebefehl gesendet wird und
erlischt, wenn ein Stopp-Befehl gesendet wird. Um einzustellen, wie die Start/Stopp-Taste in einem Patch
funktioniert, lesen Sie bitte den Abschnitt Bearbeiten der Start/Stopp-Taste in diesem Handbuch.
Programmwechsel Aufwrts/Abwrts (Program Change Up/Down) Sedet Programmwechselbefehle an
Ihre Computersoftware oder an Ihr MIDI-Gert. Halten Sie eine dieser Tasten, um jeweils durch 10 Programme
auf einmal zu blttern.
Hinweis: Vortex Wireless wird erst dann einen Programmwechselbefehl senden, wenn die Tasten
Aufwrts/Abwrts losgelassen werden.
Taste Patch Bearbeiten (Patch Edit Button) Drcken Sie diese Taste, um zwischen den Modi Bearbeiten
und Performance umzuschalten.
Hinweis: In diesem Modus leuchten die drei LEDs fr die Patch-Auswahl auf.
Patch-Auswahl (Patch Select) Drcken Sie auf die Drum-Pads, um interne Patches auszuwhlen. Das Pad
des aktuell ausgewhlten Patch wird aufleuchten.
Drehregler Beim Drehen werden verschiedene MIDI-Befehle gesendet. Jeder Drehregler kann individuell
einem anderen MIDI-Parameter zugewiesen werden. Drcken Sie diese Taste und verwenden Sie die DrumPads, um einen internen Patch auszuwhlen. Um einzustellen, wie die Drehregler in einem Patch
funktionieren, lesen Sie bitte den Abschnitt Bearbeiten von Drehreglern, Schiebereglern, Akzelerometern
oder Ribbon Controller in diesem Handbuch.
Trigger/Drum Pads Drcken Sie auf die Pads, um MIDI-Befehle zu senden oder nutzen Sie die Taste PatchAuswahl mit den Pads, um interne Patches auszuwhlen. Um einzustellen, wie die Pads in einem Patch
funktionieren, lesen Sie bitte den Abschnitt Bearbeiten der Pads in diesem Handbuch.
Gurthalter Verwenden Sie den mitgelieferten Gitarrengurt fr zustzlichen Halt beim Spielen.
40
1
Seitenteil
1.
2.
3.
4.
5.
8
7
Rckseite
1.
2.
3.
3
1
Besuchen Sie zuerst die Alesis Vortex Wireless Support-Seite, um die SONiVOX Vortex-I DVi auf
alesis.com/vortex-wireless herunterzuladen.
2.
Drcken Sie auf Patch-Auswahl bis die LED neben C leuchtet.
3.
Drcken Sie P7 (Pad 7) innerhalb von 5 Sekunden. Wenn der richtige Patch ausgewhlt ist, zeigt das Display
P23.
Nun ist Ihr DVi den Vortex Wireless-Bedienelementen zugewiesen, wenn das Vortex Wireless DVi geffnet wird.
2.
3.
4.
Legen Sie die beigelegte DVD in das DVD-Laufwerk Ihres Computers, ffnen Sie die Anwendung "Setup" oder
.exe (Windows) bzw. die .mpkg-Datei (Mac) und befolgen Sie die Anweisungen auf dem Bildschirm, um die
Software zu installieren.
Verbinden Sie Vortex Wireless mit dem Computer und schalten Sie das Gert ein.
ffnen Sie die Ableton Live Lite Software.
Um die Regler des Vortex Wireless Ableton Live Lite zuzuweisen, lesen Sie bitte den Abschnitt Verwendung
des Vortex Wireless mit Software des Handbuchs.
Besuchen Sie alesis.com/vortex-wireless, klicken Sie auf Docs & Downloads, laden Sie die Vortex Wireless
Ableton Live Controller Map herunter und installieren Sie sie.
Drcken Sie auf Patch-Auswahl bis die LED neben A leuchtet.
Drcken Sie P1 (Pad 1) innerhalb von 5 Sekunden. Wenn der richtige Patch ausgewhlt ist, zeigt das Display
P1.
Ignite
Wir empfehlen Ihnen das Musikproduktions-Tool Ignite herunterzuladen: Ignite wurde von AIR Music Technology
entwickelt, um musikalische Ideen mglichst einfach zu erfassen, zu bearbeiten und zu verffentlichen. Ignite kann
alleine oder als zustzliches Tool mit Ihrer DAW eingesetzt werden.
Besuchen Sie airmusictech.com/getignite, um Ihre Kopie von Ignite herunterzuladen und zu installieren.
Vyzex Vortex
Es steht ein auf Software basierender Patch-Editor zur Verfgung, mit dem Sie die Patches von Vortex Wireless mit
wenigen Klicks ganz einfach bearbeiten knnen. Fr weitere Informationen besuchen Sie bitte die Support-Seite von
Alesis Vortex Wireless auf alesis.com/vortex-wireless.
41
Modi
Performance-Modus
Sobald sich Vortex im Performance-Modus befindet wird PF am LED-Display angezeigt. In diesem Modus knnen
MIDI-Daten von Vortex jederzeit bertragen werden.
Drcken Sie die Taste Patch-Auswahl, um durch die Patch-Banken zu blttern. Die entsprechende Bank-LED
leuchtet.
Verwenden Sie die Trigger/Drum-Pads, um den Patch auszuwhlen, den Sie laden mchten. Alternativ knnen
Sie schnell zum nchsten oder vorherigen Patch springen, indem Sie Patch Auswhlen und anschlieend
sofort Programm Vor (Program Up) oder Programm Zurck (Program Down) drcken.
Sie knnen auch die Patch-Bearbeitungssoftware von Vyzex Vortex zum Bearbeiten Ihrer Patches verwenden.
42
4.
Unten sehen Sie eine Referenzliste mit allen verfgbaren Modi fr Pads sowie alle verfgbaren Parameter fr jeden
Pad-Modus.
Modus
Note
CC Umschalten
Vorbergehende CC
Programmwechsel
Panic Mode
Zugewiesener
Drehregler
Funktion
Drehregler # 1
Drehregler # 2
Drehregler # 3
Drehregler # 1
CC # (0 127)
Drehregler # 2
Umschaltwert 1 (0 - 127)
Drehregler # 3
Umschaltwert 2 (0 - 127)
Drehregler # 1
CC # (0 127)
Drehregler # 2
Druckwert (0 - 127)
Drehregler # 3
Release-Wert (0 - 127)
Drehregler # 1
Programm-Nummer (0 - 127)
Drehregler # 2
Drehregler # 3
n/a
43
3.
4.
5.
3.
4.
3.
4.
5.
44
5.
Unten sehen Sie eine Referenzliste mit allen verfgbaren Modi fr Drehregler, Schieberegler, Akzelerometer und Ribbon
Controller, sowie alle verfgbaren Parameter, die fr diese Bedienelemente bearbeitet werden knnen.
Modus
Zugewiesener
Drehregler
Funktion
CC-Nachricht
Drehregler # 1
CC # (0 127)
Drehregler # 2
Minimalwert (0 - 127)
Drehregler # 3
Maximalwert (0 - 127)
Drehregler # 1
MIDI-Kanal (1 - 16)
Drehregler # 2
Minimalwert (0 - 127)
Drehregler # 3
Maximalwert (0 - 127)
Drehregler # 1
MIDI-Kanal (1 - 16)
Drehregler # 2
Minimalwert (0 - 127)
Drehregler # 3
Maximalwert (0 - 127)
Pitch-Bend
Aftertouch
45
5.
6.
Unten sehen Sie eine Referenzliste mit allen verfgbaren Modi fr die Taste Start/Stopp und alle verfgbaren Parameter, die
fr dieses Bedienelement bearbeitet werden knnen.
Modus
Zugewiesener
Drehregler
Funktion
MIDI-Echtzeitmodus
Drehregler # 1
Modus ndern
(0 - 63) MIDI-Echtzeitmodus
(64 - 127) CC-Modus
Drehregler # 2
Kein Effekt
Drehregler # 3
Kein Effekt
Drehregler # 1
Modus ndern
(0 - 63) MIDI-Echtzeitmodus
(64 - 127) CC-Modus
Drehregler # 2
Start-Nachricht CC # (0 - 127)
Drehregler # 3
Stopp-Nachricht CC # (0 - 127)
CC-Modus
So stellen Sie die Transposition der oberen oder unteren Zone ein:
1.
2.
3.
4.
So stellen Sie den MIDI-Kanal fr die obere oder untere Tastaturzone ein:
1.
2.
3.
4.
46
So stellen Sie die Anschlagdynamik-Kurve der oberen oder unteren Keyboardzone ein:
1.
2.
3.
4.
So ndern Sie die Standardnachricht fr die Lautstrke, die gesendet wird, wenn eine Zone ausgewhlt ist:
1.
2.
3.
4.
So legen Sie das LSB (Least Significant Byte - niedrigstwertiges Byte) und MSB (Most Significant Byte hchstwertiges Byte) fest:
1.
2.
3.
4.
Allgemeinhinweis zur Konformittserklrung: Hiermit erklren wir, da sich das Gert Vortex
Wireless in bereinstimmung mit den grundlegenden Anforderungen der europischen Richtlinie
1999/5/EG befindet. Die vollstndige EG Konformittserklrung kann unter folgender Adresse
angefordert werden:
inMusic GmbH
Halskestrasse 16-18
D 47877 Willich
GERMANY
47
Appendix (English)
Velocity Curves
48
Recognize /
Import
Remarks
1. Basic Information
MIDI channels
1-16
1-16
Note numbers
1-128
1-128
Program change
1-128
0-24
Yes
No
Modes supported:
Mode 1: Omni-On, Poly
Mode 2: Omni-On, Mono
Mode 3: Omni-Off, Poly
Mode 4: Omni-Off, Mono
Multi Mode
No
No
Yes
No
No
No
No
No
No
No
Note-On Velocity
Yes
No
Note-Off Velocity
No
No
Channel Aftertouch
Yes
No
No
No
Pitch Bend
Yes
No
Active Sensing
No
No
System Reset
Yes
No
Tune Request
No
No
Yes
Yes
Manufacturer or
System Exclusive
Yes
No
NRPNs
No
No
RPNs
No
No
Non-Commercial
No
No
No
No
Song Select
No
No
Start
Continue
Stop
Record
Fast-forward
Rewind
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
49
Lights pads
numbers
Device inquiry
assigned
to
note
Technical Specifications
Power
Dimensions (Length x
Width x Height)
Weight
50
alesis.com