Professional Documents
Culture Documents
USERS MANUAL
Table of Contents
1.Introduction ......................................................................................................................1
1.1 Features....................................................................................................................1
YUMYUNG
1. Introduction
SMP-7000H has been designed by Microprocessor control type, it can
operating have the stability, simple operation, easily expansion and compact view atc.
1.1 Features
1) Stability
- It is reliable operation by Microprocessor control
- Power supply have the noise filter
- PCB has been designed with separate line as like power
line and signal line for EMI protection.
- Unit case has made by aluminium material
2) Simple operation
- It has applied the one- touch operation type with MODE and
ENT key
3) Easily Operation
- It has spare terminal of input/output signal and software margine
also.
5) Easily A/S
- It can be changed the trouble PCB only of several PCB's
- Terminal blocks has been designed separately with main unit.
YUMYUNG
2. Product Specification
ITEM
Specification
Power Source
DC 24V, 20%
Consumption Power
Display Method
Accuracy
FS. 0.2%
Display Range
0 ~ 9999
Setup
Digital Setting
ENG Speed
T/C Speed
INPUT
Voltage Output
Frequency Output
+UB(10 ~ 40V)-1.8V
Square Wave
Sign wave
RPM
0 ~ 60000RPM (0~2kHz)
ENG
T/C
ENG
0~10kHz
T/C
ENG
0 ~ 6V
T/C
0 ~ 6V
ENG
2. Safety Start
Relay Driver Output
3. Running
4.Over Speed
5. Fuel Limit (L27/38: Start Limit), (L32/40: RPM)
6. Spare (L27/38: JET SYS), (L32/40: Spare)
Applied Engine
Insulation Resistance
Operating Temperature
-10 ~ +65
Storage Temperature
-25 ~ +70
Operating Humidity
Dimension
Weight
720g
Case Material
Steel
YUMYUNG
Number
Name
Descriptions
SAFE START LED LED is for indication of the condition of ready to start
After input of fail or start of Pick-up sensor, during the
time of safety start, if RPM is not input LED shall be
TACHO FAIL LED
lighted.
(it is for warning to inform of abnormal operation
condition)
ENG RUN LED
OVER SPEED
LED
FUEL LIMIT
RPM Display
Setting Button
Relay Driver
Output
Relay Driver Output terminal and Engine or T/C RPM output terminal.
/Voltage Output
YUMYUNG
ITEM
Hz
H21/32
H25/33
RPM
0 ~ 1000 RPM
0 ~ 1000 RPM
Output
0 ~ 6V
0 ~ 6V
Note: L23/30 needs 70 cam gears and L28/32 needs 74 cam gears. However,
L23/30 and L28/32 should be calculated with 35 and 37 cam gears respectively.
ITEM
Hz
RPM
0 ~ 60000 RPM
Output [V]
0 ~ 6V
Note: Number of hole for T/C Pick-up signal in medium size engine is
one.
YUMYUNG
Mode change
Save the setting value
OFF RPM Set-
Mode change
Save the setting value
Safe Start Delay Time SetMode change
Safe Start OFF RPM Set-
Mode change
Save the setting value
Setup the TACHO FAIL
YUMYUNG
6. ENG & T/C Voltage Output, Software Group Setting Flow Chart
Mode change
Mode change
Mode change
Mode change
YUMYUNG