You are on page 1of 48

Automatic Slack Adjuster

Parts Catalog

PRODUCTS CATALOG

WARRANTY
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

WARRANTY
Gunite Corporation warrants to the original purchaser that its Automatic Slack
Adjusters and related components when installed and maintained in accordance
with Gunite Corporation instructions, to be free of defects in material and
workmanship under normal use and service for:

Over-the Road/Line Operated trucks and trailers, five (5) years, or


500,000 miles, whichever occurs first.
School Bus/City Delivery vehicles, three (3) years, or 300,000 miles,
whichever occurs first.
Severe Service (ie: Refuse and Off-Highway) vehicles, two (2) years or
200,000 miles, whichever occurs first.

Gunite Corporation agrees to repair or replace, without charge, any and all of its
products which fail in normal use and service because of defects in material and/or
workmanship.
Gunite Corporation shall not be liable for any incidental or consequential damages
for any breach of warranty, its liability, and the purchasers exclusive remedy being
expressly limited to repair or replacement of the product as herein provided. There
are no other warranties, expressed or implied except such as is set forth herein.

PRODUCTS CATALOG

INDEX
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

TABLE OF CONTENTS
INTRODUCTION
Warranty .. Inside Cover
Identification Inside Cover
Index .1
Features and Benefits
Automatic Slack Adjusters
Other Brands Comparison .2
Numerical Listing
Automatic Slack Adjusters .3
Clevis Kits 4
Service Kits ..4
Axle Applications
Front (Steer) Axle Applications .5
Rear (Drive) Axle Applications ..5
Trailer Axle Applications 5
Obsolete Products
Obsolescence Listing . 6
Cross References
Gunite Production to Gunite Aftermarket .. 7-10
OEM Part Number to Gunite .11-15
Other Brands to Gunite
Bendix Corporation ..16-19
Crewson Industries ..19-21
Eagle ..21-22
Dana/Eaton Corporation .22-25
Euclid .25-29
Haldex Brake Systems 29-34
Meritor 34-41
Haldex Brake Systems Midland .41-44
Sloan 44

The Gunite part numbering system is proprietary to Gunite Corporation. Any improper or unauthorized use of
these numbering systems, including adoption or use of any Gunite part number, even where the subject is one of
modification or addition, is strictly prohibited and will be prosecuted by Gunite Corporation as a violation of
U. S. and foreign copyright, trademark, and unfair competition laws. In addition, use of any Gunite trademark, trade
name, packaging scheme, system, color, or design is likewise considered a violation of the trademark, trade name,
and trade identity rights of Gunite Corporation.
The interchange information shown in this catalog is based on the best available information at the time of
publication. Although reasonable care has been taken to ensure the accuracy of this information, Gunite
Corporation does not assume any liability for errors, changes, omissions, or harm resulting from the use of this
information. It is recommended that all parts be thoroughly checked to ensure proper fit, form, and function prior to
installation.

COPYRIGHT 2007

GUNITE CORPORATION
1

PRODUCTS CATALOG

FEATURES AND BENEFITS


AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

The Gunite Automatic Slack Adjuster combines easy installation and outstanding performance in a double sealed
package for longer brake lining life with consistent, safer brake performance.

5", 5-1/2", 6", 6-1/2" Arm Lengths


Straight or Offset clevis with 1/2" or 5/8" threads
Unhanded design
Compact housing for easy installation
Double sealed actuator arm
Drilled worm wheel
Factory lubricated and sealed
Extended life clevis pin bushing
O-Ring on spline gear
Available in 10, 24, 28, or 37 spline configurations

OTHER BRANDS COMPARISON

Gunite

Haldex

Clearance
Torsion Spring
Torsion Spring

Crewson
Industries
Clearance
Cone Clutch
Coil

Clearance
Cone Clutch
Belleville Springs

Clearance
Cone Clutch
Coil

No

No

No

Yes

Yes

On Return

On Apply

On Return

On Apply

On Return

Drilled
Buttress
No

Optional
Symmetric
Yes

Drilled
Symmetric
Yes

Drilled
Buttress
Yes

No
Buttress
Yes

No

No

No

No

Yes

Feature

Arvin Meritor

Bendix

Sensing Type
Clutch
Clutch Spring
Two-Way
Adjustment
Adjustment
Occurs
Drilled Gear
Gear Thread
Non-Handed
External
Attachments

Stroke
Ratcheting
No Spring

PRODUCTS CATALOG

NUMERICAL LISTING
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

GUNITE AUTOMATIC SLACK ADJUSTERS


Gunite Part Packaged
Number
Weight
AS1031
AS1032
AS1033
AS1034
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045

7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5"
10
1-1/2"
n/a
5-1/2"
10
1-1/2"
n/a
6"
10
1-1/2"
n/a
6-1/2"
10
1-1/2"
n/a
5"
10
1-1/4"
n/a
5-1/2"
10
1-1/4"
n/a
5"
24
1-1/4"
n/a
5-1/2"
24
1-1/4"
n/a
5"
28
1-1/2"
n/a
5-1/2"
28
1-1/2"
n/a
6"
28
1-1/2"
n/a
6-1/2"
28
1-1/2"
n/a
5-1/2"
37
1-1/2"
n/a
6"
37
1-1/2"
n/a
6-1/2"
37
1-1/2"
n/a

GUNITE 2000 AUTOMATIC SLACK ADJUSTERS


Gunite Part Packaged
Number
Weight
AS1168
AS1169
AS1170
AS1171
AS1172
AS1173
AS1174
AS1175
AS1176
AS1179

8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5-1/2"
10
1-1/2"
n/a
6"
10
1-1/2"
n/a
5-1/2"
10
1-1/4"
n/a
5-1/2"
24
1-1/4"
n/a
5-1/2"
28
1-1/2"
n/a
6"
28
1-1/2"
n/a
6-1/2"
10
1-1/2"
n/a
6-1/2"
28
1-1/2"
n/a
6"
28
1-1/2" AS3023
6"
10
1-1/2" AS3024

Above referenced Automatic Slack Adjusters require the use of a Clevis with
a 1.3" pin center distance. DO NOT attempt to install a Gunite 2000
Automatic Slack Adjuster using a Gunite standard (1.02" pin center distance)
collar lock or threaded clevis kit, as this will cause improper brake function.

Above referenced Automatic Slack Adjusters require the use of a Clevis with
a 1.02" pin center distance.

GUNITE AUTOMATIC SLACK ADJUSTER KITS


Gunite Part Packaged
Number
Weight
AS1131
AS1132
AS1133
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143 (1)
AS1144 (1)
AS1145 (1)
AS1146 (1)
AS1147 (1)
AS1148 (1)
AS1149 (1)
AS1150 (1)
AS1151 (1)
AS1152 (2)
AS1153 (3)
AS1154 (2)
AS1155 (3)
AS1156 (3)
AS1157 (3)
AS1159 (4)
AS1160 (4)
AS1161 (4)
AS1162 (4)
AS1163 (4)
AS1164 (4)
AS1165 (4)
AS1166 (4)
AS1167 (4)

8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5"
10
1-1/2" AS3016
5-1/2"
10
1-1/2" AS3019
6"
10
1-1/2" AS3016
6-1/2"
10
1-1/2" AS3016
5"
10
1-1/4" AS3019
5-1/2"
10
1-1/4" AS3019
5"
24
1-1/4" AS3019
5-1/2"
24
1-1/4" AS3019
5"
28
1-1/2" AS3016
5-1/2"
28
1-1/2" AS3019
6"
28
1-1/2" AS3016
6-1/2"
28
1-1/2" AS3016
5-1/2"
37
1-5/8" AS3018
6"
37
1-5/8" AS3018
6-1/2"
37
1-5/8" AS3018
5-1/2"
10
1-1/2" AS3018
6"
10
1-1/2" AS3018
6-1/2"
10
1-1/2" AS3018
5-1/2"
28
1-1/2" AS3018
6"
28
1-1/2" AS3018
6-1/2"
28
1-1/2" AS3018
5-1/2"
10
1-1/4" AS3002
5-1/2"
10
1-1/4" AS3003
5-1/2"
24
1-1/4" AS3002
5-1/2"
24
1-1/4" AS3003
5-1/2"
10
1-1/2" AS3003
5-1/2"
28
1-1/2" AS3003
5-1/2"
37
1-5/8" AS3021
6"
37
1-5/8" AS3021
6-1/2"
37
1-5/8" AS3021
5-1/2"
10
1-1/2" AS3021
6"
10
1-1/2" AS3021
6-1/2"
10
1-1/2" AS3021
5-1/2"
28
1-1/2" AS3021
6"
28
1-1/2" AS3021
6-1/2"
28
1-1/2" AS3021

VMRS
#13-001-030 (Front Axles)
#13-002-0028 (Rear Axles)

Above referenced Automatic Slack Adjusters Kits are furnished with a Clevis
that has a 1.02" pin center distance.
(1) Extended length Clevis included for trailer applications.
(2) .625" offset, 1/2" - 20 thread Clevis.
(3) .625" offset, 5/8" - 18 thread Clevis.
(4) Extended length collar lock Clevis with stainless steel pins.

PRODUCTS CATALOG

NUMERICAL LISTING
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

VMRS #13-002-056 (Clevis)

Standard Length
Threaded

Standard Length
Collar Lock

Standard Length
Threaded, Offset

Extended Length
Threaded

Extended Length
Collar Lock

CLEVIS KITS - D
Gunite Part Packaged
Clevis Type
Number
Weight
AS3000
0.8
Threaded
AS3001
0.8
Threaded
AS3002
0.9
Threaded
AS3003
0.9
Threaded
AS3011 (5)
0.8
Threaded
AS3012 (5)
0.8
Threaded
AS3013
1.0
Extended Threaded
AS3015
1.0
Extended Threaded
AS3016
0.8
Collar Lock
AS3017
0.9
Collar Lock
AS3018
0.9
Extended Collar Lock
AS3019
1.0
Collar Lock
AS3021
0.9
Extended Collar Lock
AS3022
Threaded
AS3023
Threaded
AS3024
Threaded

Style

Push Rod Thread

Straight
Straight
5/8" Offset
5/8" Offset
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
3/8" Offset
5/8" Offset

5/8"-18
1/2"-20
1/2"-20
5/8"-18
5/8"-18
1/2"-20
5/8"-18
5/8"-18
5/8"-18
1/2"-20
5/8"-18
1/2"-20 & 5/8"-18
5/8"-18
5/8"-18
5/8"-18
5/8"-18

Special Notes

For applications with 5/8" Clevis Pins


For applications with 5/8" Clevis Pins
Furnished with stainless steel clevis pins.

Furnished with (1) 1/2" and (1) 5/8" collar nuts.


With stainless steel clevis pins.
For use on Gunite 2000 Automatic Slack Adjusters only.
For use on Gunite 2000 Automatic Slack Adjusters only.
For use on Gunite 2000 Automatic Slack Adjusters only.

Above referenced Automatic Slack Adjusters Kits are furnished with a Clevis that has a 1" pin center distance.
When installing or replacing a Gunite Automatic Slack Adjuster, it is recommended that a new clevis assembly be installed in accordance with the Gunite
Automatic Slack Adjuster Service manual.
(5) For older applications requiring .625 diameter clevis pins.

1/4" Clevis Pin

1/2" Clevis Pin

Cotter Pin

Arm Bushing

Link Boot

SERVICE KITS
Gunite Part Packaged
Description
Contents
Number
Weight
AS4001
0.1
Link Boot & Arm Bushing Kit (1) Link Boot, (1) 1/2" Steel Arm Bushing
AS4004

0.8

AS4005 (5)
AS4006 (5)

0.4
0.9

AS4007 (5)
AS4008
AS4012

0.1
0.7
0.9

AS4013
AS4014
AS4015

0.5
0.5
0.4

(6) 1/2" Clevis Pins, (6) 1/4" Clevis Pins, (12)


Cotter Pins
Arm Bushing Kit
(24) 5/8" Steel Arm Bushings
Clevis Pin Kit
(6) 5/8" Clevis Pins (6) 1/4" Clevis Pins (12)
Cotter Pins
Link Boot & Arm Bushing Kit (1) Link Boot, (1) 5/8" Steel Arm Bushing
Installation Gauge
OEM Installation Gauge
Stainless Steel Clevis Pin Kit (6) 1/2" Clevis Pins, (6) 1/4" Clevis Pins, (12)
Cotter Pins
Collar Lock Nuts
(4) 1-1/4" Locking Nuts, (4) 5/8"-18 Collar Nuts
Collar Lock Nuts
(4) 1-1/4" Locking Nuts, (4) 1/2"-20 Collar Nuts.
Arm Bushing Kit
(24) 1/2" Steel Arm Bushings

Clevis Pin Kit

(5) For older applications requiring .625" diameter clevis pins.

Special Notes
Services older 4 bellows design
manufactured prior to 01/01/2005.

For applications with 5/8" Clevis Pins


For applications with 5/8" Clevis Pins
For applications with 5/8" Clevis Pins
Stainless Steel Components

PRODUCTS CATALOG

AXLE APPLICATION
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

FRONT (STEER) AXLE APPLICATIONS


Gunite Part Packaged
Number
Weight
AS1035
AS1135
AS1036
AS1136
AS1152 (2)
AS1153 (3)
AS1170
AS1032
AS1132
AS1168
AS1037
AS1137
AS1038
AS1138
AS1154 (2)
AS1155 (3)
AS1171
AS1040
AS1140
AS1172

7.0
8.0
7.0
8.0
8.0
8.0
8.0
7.0
8.0
8.0
7.0
8.0
7.0
8.0
8.0
8.0
8.0
7.0
8.0
8.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5"
10
1-1/4"
n/a
5"
10
1-1/4" AS3019
5-1/2"
10
1-1/4"
n/a
5-1/2"
10
1-1/4" AS3019
5-1/2"
10
1-1/4" AS3002
5-1/2"
10
1-1/4" AS3003
5-1/2"
10
1-1/4"
n/a
5-1/2"
10
1-1/2"
n/a
5-1/2"
10
1-1/2" AS3019
5-1/2"
10
1-1/2"
n/a
5"
24
1-1/4"
n/a
5"
24
1-1/4" AS3019
5-1/2"
24
1-1/4"
n/a
5-1/2"
24
1-1/4" AS3019
5-1/2"
24
1-1/4" AS3002
5-1/2"
24
1-1/4" AS3003
5-1/2"
24
1-1/4"
n/a
5-1/2"
28
1-1/2"
n/a
5-1/2"
28
1-1/2" AS3019
5-1/2"
28
1-1/2"
n/a

REAR (DRIVE) AXLE APPLICATIONS


Gunite Part Packaged
Number
Weight
AS1031
AS1131
AS1032
AS1132
AS1156 (3)
AS1168
AS1033
AS1133
AS1169
AS1179
AS1034
AS1134
AS1174
AS1039
AS1139
AS1040
AS1140
AS1157 (3)
AS1172
AS1041
AS1141
AS1173
AS1176
AS1042
AS1142
AS1175

7.0
8.0
7.0
8.0
8.0
8.0
7.0
8.0
8.0
8.0
7.0
8.0
8.0
7.0
8.0
7.0
8.0
8.0
8.0
7.0
8.0
8.0
8.0
7.0
8.0
8.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5"
10
1-1/2"
n/a
5"
10
1-1/2" AS3016
5-1/2"
10
1-1/2"
n/a
5-1/2"
10
1-1/2" AS3019
5-1/2"
10
1-1/2" AS3003
5-1/2"
10
1-1/2"
n/a
6"
10
1-1/2"
n/a
6"
10
1-1/2" AS3016
6"
10
1-1/2"
n/a
6"
10
1-1/2" AS3024
6-1/2"
10
1-1/2"
n/a
6-1/2"
10
1-1/2" AS3016
6-1/2"
10
1-1/2"
n/a
5"
28
1-1/2"
n/a
5"
28
1-1/2" AS3016
5-1/2"
28
1-1/2"
n/a
5-1/2"
28
1-1/2" AS3019
5-1/2"
28
1-1/2" AS3003
5-1/2"
28
1-1/2"
n/a
6"
28
1-1/2"
n/a
6"
28
1-1/2" AS3016
6"
28
1-1/2"
n/a
6"
28
1-1/2" AS3023
6-1/2"
28
1-1/2"
n/a
6-1/2"
28
1-1/2" AS3016
6-1/2"
28
1-1/2"
n/a

TRAILER AXLE APPLICATIONS


Gunite Part Packaged
Number
Weight
AS1146
AS1162 (4)
AS1168
AS1147
AS1163 (4)
AS1169
AS1179
AS1148
AS1164 (4)
AS1174
AS1149
AS1165 (4)
AS1172
AS1150
AS1166 (4)
AS1173
AS1176
AS1151
AS1167 (4)
AS1175
AS1043
AS1143
AS1159 (4)
AS1044
AS1144
AS1160 (4)
AS1045
AS1145
AS1161 (4)

8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
7.0
8.0
8.0
7.0
8.0
8.0
7.0
8.0
8.0

Arm
Number of Spline
Clevis
Length
Splines Diameter
Kit
A
B
C
D
5-1/2"
10
1-1/2" AS3018
5-1/2"
10
1-1/2" AS3021
5-1/2"
10
1-1/2"
n/a
6"
10
1-1/2" AS3018
6"
10
1-1/2" AS3021
6"
10
1-1/2"
n/a
6"
10
1-1/2" AS3024
6-1/2"
10
1-1/2" AS3018
6-1/2"
10
1-1/2" AS3021
6-1/2"
10
1-1/2"
n/a
5-1/2"
28
1-1/2" AS3018
5-1/2"
28
1-1/2" AS3021
5-1/2"
28
1-1/2"
n/a
6"
28
1-1/2" AS3018
6"
28
1-1/2" AS3021
6"
28
1-1/2"
n/a
6"
28
1-1/2" AS3023
6-1/2"
28
1-1/2" AS3018
6-1/2"
28
1-1/2" AS3021
6-1/2"
28
1-1/2"
n/a
5-1/2"
37
1-5/8"
n/a
5-1/2"
37
1-5/8" AS3018
5-1/2"
37
1-5/8" AS3021
6"
37
1-5/8"
n/a
6"
37
1-5/8" AS3018
6"
37
1-5/8" AS3021
6-1/2"
37
1-5/8"
n/a
6-1/2"
37
1-5/8" AS3018
6-1/2"
37
1-5/8" AS3021

(2) .625" offset, 1/2" - 20 thread Clevis.


(3) .625" offset, 5/8" - 18 thread Clevis.
(4) Extended length collar lock Clevis with stainless steel pins.

PRODUCTS CATALOG

OBSOLETE PRODUCTS
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Obsolete
Service
Number
AS1000
AS1001
AS1002
AS1005
AS1007
AS1011
AS1012
AS1013
AS1014
AS1015
AS1016
AS1017
AS1018
AS1019
AS1020
AS1021
AS1025
AS1026
AS1027

Gunite Part Number With Clevis Kit


Gunite Part
No Offset
Number
.625" Offset Front (Steer) Axles
Front (Steer) Axles
Direct
Rear (Drive) Axles
Front
(Steer)
Axle
Replacement
.500-20 Thread .625-18 Thread
Applications
AS1033
AS1133
AS1041
AS1141
AS1044
AS1036
AS1136
AS1152
AS1153
AS1038
AS1138
AS1154
AS1155
AS1038
AS1138
AS1154
AS1155
AS1040
AS1140
AS1140
AS1035
AS1135
AS1031
AS1131
AS1037
AS1137
AS1039
AS1139
AS1037
AS1137
AS1039
AS1139
AS1032
AS1132
AS1132
AS1040
AS1140
AS1140
AS1043
AS1034
AS1134
AS1042
AS1142
AS1045

Included
.625" Offset Rear
Trailer Axles
(Drive) Axles
AS1147
AS1150
AS1144

AS1157

AS1149

AS1156
AS1157

AS1146
AS1149
AS1143
AS1148
AS1151
AS1145

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Gunite Production to Gunite Aftermarket


Gunite
Production
Part Number
550010
556510
556510
556528
556528
600010
600028
600037
10345901
10345902
10345903
10345904
10345904
10345905
10345905
10345906
10345906
10345907
10345907
10345908
10345908
10345909
10345909
10345910
10345910
10345911
10345911
10345912
10480401
10480501
10480601
10480701
10480701
10480801
10480801
10480901
10481001
10661701
10661901
00-20105
00-20105
00-20106
00-20106
00-20114
00-20115
00-20116
00-20124
00-20124
00-20125
00-20125
00-20126
00-20126
98-20010
98-20072
98-20074
98-20076
ACF4205-1
APA0994-2
APA0994-2

Gunite
Gunite Clevis
Aftermarket
Kit Part
Part Number
Number
AS1036
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1033
AS1041
AS1044
AS1033
AS1041
AS1044
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1043 (6)
AS1045 (7)
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1043 (6)
AS1045 (7)
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1036
AS1033
AS1041
AS1044
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS3000
AS3003
AS3002
AS3001
AS1040 (6)
AS1042 (7)
AS1032 (6)
AS1034 (7)
AS1044
AS1041
AS1033
AS1043 (6)
AS1045 (7)
AS1040 (6)
AS1042 (7)
AS1032 (6)
AS1034 (7)
AS3000
AS3003
AS3002
AS3001
AS1044
AS1040 (6)
AS1042 (7)

Gunite
Production
Part Number
D00-20002
D00-20003
D00-20011
D00-20011
D00-20080
KN5220
KN52200
KN52210
KN52230
KN52230
KN52240
KN52240
KN52260
KN52260
SA00101
SA00102
SA00103
SA00104
SA00104
SA00105
SA00106
SA00107
SA00201
SA00202
SA00203
SA00204
SA00204
SA00205
SA00206
SA00301
SA00302
SA00303
SA00304
SA00304
SA00401
SA00402
SA00403
SA00501
SA00502
SA00503
SA00601
SA00602
SA00603
SA00701
SA00702
SA00703
SA00704
SA00801
SA00802
SA00802
SA00803
SA00804
SA00805
SA00806
SA00807
SA00808
SA00901
SA00902
SA00902

Gunite
Aftermarket
Part Number
AS1041
AS1044
AS1040 (6)
AS1042 (7)
AS1036
AS1044
AS1033
AS1041
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1043 (6)
AS1045 (7)
AS1033
AS1032
AS1034
AS1032 (6)
AS1034 (7)
AS1036
AS1035
AS1031
AS1041
AS1040
AS1042
AS1040 (6)
AS1042 (7)
AS1039
AS1039
AS1044
AS1043
AS1045
AS1043 (6)
AS1045 (7)
AS1032
AS1033
AS1034
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045

AS1033
AS1032 (6)
AS1034 (7)
AS1156
AS1036
AS1032
AS1034
AS1152
AS1153
AS1041
AS1040 (6)
AS1042 (7)

Gunite Clevis
Kit Part
Number

AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3001
AS3003
AS3002
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000

AS3000
AS3000
AS3000

Gunite
Production
Part Number
SA00903
SA00904
SA00905
SA00906
SA00907
SA00908
SA01001
SA01002
SA01003
SA01101
SA01102
SA01103
SA01201
SA01202
SA01203
SA01204
SA01301
SA01302
SA01303
SA01304
SA01401
SA01403
SA01501
SA01601
SA01701
SA01901
SA02001
SA02101
SA02104
SA02105
SA02106
SA02110
SA02111
SA02112
SA02113
SA02114
SA02115
SA02201
SA02203
SA02204
SA02205
SA02206
SA02207
SA02210
SA02211
SA02212
SA02213
SA02301
SA02302
SA02303
SA02304
SA02304
SA02401
SA02402
SA02403
SA02501
SA02502
SA02503
SA02601

Gunite
Aftermarket
Part Number
AS1040
AS1042
AS1040
AS1040
AS1041
AS1040
AS1044
AS1043
AS1045
AS1032
AS1033
AS1034
AS1040
AS1041
AS1042
AS1040
AS1043
AS1044
AS1045
AS1044

AS1040
AS1044
AS1133
AS1132
AS1134
AS1131
AS1156
AS1156
AS1031
AS1031
AS1033
AS1033
AS1141
AS1140
AS1142
AS1139
AS1041
AS1040
AS1041
AS1041
AS1157
AS1157
AS1044
AS1043
AS1045
AS1043
AS1045
AS1132
AS1133
AS1134
AS1140
AS1141
AS1142
AS1043

Gunite Clevis
Kit Part
Number
AS3000
AS3000
AS3003
AS3001
AS3021
AS3021
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3000
AS3015
AS3003
AS3002
AS3001
AS3000
AS3000

AS3002
AS3002
AS3003
AS3003

AS3021
AS3021
AS3003
AS3003

AS3019
AS3019
AS3019
AS3019
AS3019

AS3019

(6) For 5.5" arm lengths only.


(7) For 6.5" arm lengths only.

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Gunite Production to Gunite Aftermarket (continued)


Gunite
Production
Part Number
SA02602
SA02603
SA02701
SA02702
SA02712
SA02713
SA02801
SA02901
SA03001
SA03002
SA03003
SA03101
SA03102
SA03103
SA03112
SA03113
SA03114
SA03301
SA03401
SA03501
SA03601
SA03602
SA04101
SA04103
SA04201
SA04202
SA04203
SA04301
SA04331
SA04332
SA04333
SA04401
SA04431
SA04432
SA04532
SA04632
SA04701
SA04702
SA04801
SA04802
SA04803
SA04901
SA04902
SA05301
SA05401
SA05402
SA05403
SA05501
SA05502
SA05503
SA05504
SA05505
SA05601
SA05602
SA05603
SA05701
SA05702
SA05703
SA05704

Gunite
Gunite Clevis
Aftermarket
Kit Part
Part Number
Number
AS1044
AS3019
AS1045
AS3019
AS1136
AS1135
AS1153
AS1153
AS3000
AS3001
AS1038
AS1037
AS1037
AS1138
AS1137
AS1038
AS3000
AS1155
AS1155
AS1038
AS3003
AS1038
AS1138
AS1040
AS1140
AS1141
AS1138
AS1137
AS1140
AS1141
AS1139
AS1038
AS4001
AS4007
AS4007
AS1040
AS4015
AS4005
AS4006
AS4008
AS1037
AS1038
AS1039
AS1040
AS1041
AS4004
AS4006
AS1038
AS3000
AS1032
AS3015
AS1033
AS3015
AS1034
AS3013
AS1040
AS3013
AS1041
AS3013
AS1042
AS3013
AS1040
AS3015
AS1041
AS3021
AS1043
AS3013
AS1044
AS3013
AS1045
AS3013
AS1146
AS1033
AS3018
AS1034
AS3018
AS1163

(6) For 5.5" arm lengths only.


(7) For 6.5" arm lengths only.

Gunite
Production
Part Number
SA05801
SA05802
SA05803
SA05804
SA05805
SA05901
SA05902
SA05903
SA06001
SA06002
SA06201
SA06401
SA06402
SA06403
SA06404
SA06502
SA06503
SA06504
SA06513
SA06601
SA06602
SA06702
SA06801
SA06802
SA06901
SA06902
SA07001
SA07002
SA07003
SA07004
SA07012
SA07013
SA07101
SA07102
SA07103
SA07202
SA07203
SA07204
SA07212
SA07213
SA07302
SA07303
SA07304
SA07402
SA07403
SA07404
SA07501
SA07502
SA07505
SA07601
SA07602
SA07701
SA07702
SA07705
SA07706
SA07801
SA07802
SA07803
SA07804

Gunite
Aftermarket
Part Number
AS1140
AS1041
AS1042
AS1040
AS1166
AS1143
AS1144
AS1145

AS1036
AS1131
AS1132
AS1133
AS1134
AS1146
AS1033
AS1034
AS1163
AS1135
AS1136
AS1036
AS1137
AS1138
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1040
AS1041
AS1139
AS1140
AS1141
AS1040
AS1041
AS1042
AS1040
AS1166
AS1043
AS1044
AS1045
AS1143
AS1144
AS1145

Gunite Clevis
Kit Part
Number
AS3018
AS3018
AS3018
AS3021

AS3013
AS3015
AS3018

AS3018
AS3018

AS3018

AS3021
AS3021

AS3018
AS3018
AS3018
AS3021
AS3019
AS3019
AS3019

AS3016
AS3017
AS3019
AS3018
AS3015
AS4013
AS4014
AS4013
AS4014
AS1031
AS1032
AS1033
AS1034

Gunite
Production
Part Number
SA07901
SA07902
SA08001
SA08002
SA08101
SA08102
SA08103
SA08104
SA08202
SA08203
SA08204
SA08301
SA08302
SA08401
SA08402
SA08403
SA08502
SA08602
SA08603
SA08604
SA08702
SA08802
SA08902
SA08903
SA08904
SA08912
SA08913
SA09002
SA09003
SA09004
SA09102
SA09103
SA09104
SA09202
SA09203
SA09204
SA09212
SA09213
SA09302
SA09303
SA09304
SA09402
SA09502
SA09503
SA09602
SA09702
SA09802
SA09901
SA09902
SA09903
SA09904
SA10001
SA10002
SA10101
SA10102
SA10201
SA10202
SA10203
SA10204

Gunite
Aftermarket
Part Number
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045
AS1037
AS1038
AS1039
AS1040
AS1041
AS1040
AS1032
AS1033
AS1034
AS1036
AS1038
AS1040
AS1041
AS1042
AS1040
AS1041
AS1043
AS1044
AS1045
AS1032
AS1033
AS1034
AS1040
AS1041
AS1042
AS1040
AS1041
AS1043
AS1044
AS1045
AS1152
AS1156
AS1033
AS1153
AS1155
AS1040
AS1131
AS1132
AS1133
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142

Gunite Clevis
Kit Part
Number

AS3001
AS3000
AS3000
AS3013
AS3000
AS3000
AS3000
AS3000
AS3000
AS3021
AS3021
AS3000
AS3000
AS3000
AS3015
AS3015
AS3013
AS3013
AS3013
AS3013
AS3015
AS3021
AS3013
AS3013
AS3013

AS3003

AS3003

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Gunite Production to Gunite Aftermarket (continued)


Gunite
Production
Part Number
SA10212
SA10213
SA10302
SA10303
SA10304
SA10401
SA10402
SA10501
SA10502
SA10503
SA10602
SA10603
SA10604
SA10613
SA10702
SA10801
SA10802
SA10803
SA10804
SA10812
SA10813
SA10902
SA10903
SA10904
SA10913
SA11001
SA11002
SA11003
SA11101
SA11102
SA11103
SA11202
SA11203
SA11302
SA11303
SA11402
SA11502
SA11602
SA11603
SA11604
SA11702
SA11802
SA11902
SA11903
SA11904
SA12703
SA13003
SA13101
SA13201
SAS1000
SAS1001
SAS1002
SAS1003
SAS1003
SAS1004
SAS1004
SAS1005
SAS1006
SAS1006

Gunite
Aftermarket
Part Number
AS1040
AS1041
AS1043
AS1044
AS1045
AS1137
AS1138
AS1139
AS1140
AS1141
AS1146
AS1033
AS1034
AS1033
AS1036
AS1039
AS1040
AS1041
AS1042
AS1040
AS1166
AS1143
AS1144
AS1145
AS1160
AS1031
AS1146
AS1033
AS1039
AS1040
AS1041
AS1132
AS1133
AS1140
AS1141
AS1136
AS1138
AS1032
AS1169
AS1174
AS1170
AS1038
AS1172
AS1173
AS1175
AS1176
AS1179

Gunite Clevis
Kit Part
Number
AS3021
AS3021
AS3019
AS3019
AS3019

AS3018
AS3018
AS3015
AS3018
AS3018
AS3018
AS3018
AS3018
AS3015

AS3018
AS3018
AS3018
AS3018
AS3018

AS3023
AS3024
AS1033
AS1041
AS1044
AS1032 (6)
AS1034 (7)
AS1040 (6)
AS1042 (7)
AS1036
AS1043 (6)
AS1045 (7)

Gunite
Production
Part Number
SAS1007
SAS1008
SAS1009
SAS1010
SAS1011
SAS1012
SAS1013
SAS1014
SAS1015
SAS1016
SAS1017
SAS1018
SAS1019
SAS1020
SAS1021
SAS1022
SAS1023
SAS1024
SAS1025
SAS1026
SAS1027
SAS1028
SAS1029
SAS1030
SAS1031
SAS1032
SAS1033
SAS1034
SAS1035
SAS1036
SAS1037
SAS1038
SAS1039
SAS1040
SAS1041
SAS1042
SAS1043
SAS1044
SAS1045
SAS1046
SAS1047
SAS1048
SAS1049
SAS1050
SAS1051
SAS1052
SAS1053
SAS1054
SAS1055
SAS1056
SAS1057
SAS1058
SAS1059
SAS1060
SAS1061
SAS1062
SAS1131
SAS1132
SAS1133

Gunite
Aftermarket
Part Number
AS1038
AS1140
AS1140
AS1138
AS1038
AS1040
AS1035
AS1031
AS1037
AS1039
AS1037
AS1039
AS1032
AS1040
AS1043
AS1140
AS1140
AS1138
AS1034
AS1042
AS1045
AS1138
AS1140
AS1140
AS1031
AS1032
AS1033
AS1034
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045
AS1138
AS1140
AS1131
AS1132
AS1133
AS1136
AS1138
AS1139
AS1140
AS1141
AS1044
AS1141
AS1141
AS1040
AS1033
AS1140
AS1141
AS1131
AS1132
AS1133

Gunite Clevis
Kit Part
Number

AS3019

AS3000
AS3000

Gunite
Production
Part Number
SAS1134
SAS1135
SAS1136
SAS1137
SAS1138
SAS1139
SAS1140
SAS1141
SAS1142
SAS1143
SAS1144
SAS1145
SAS1146
SAS1147
SAS1148
SAS1149
SAS1150
SAS1151
SAS1152
SAS1153
SAS1154
SAS1155
SAS1156
SAS1157
SAS1159
SAS1160
SAS1161
SAS1162
SAS1163
SAS1164
SAS1165
SAS1166
SAS1167
SAS1168
SAS1169
SAS1170
SAS1171
SAS1172
SAS1173
SAS1174
SAS1175
SAS1176
SAS1179
SAS3000
SAS3001
SAS3002
SAS3003
SAS3004
SAS3005
SAS3011
SAS3012
SAS3013
SAS3015
SAS3016
SAS3017
SAS3018
SAS3019
SAS3021
SAS3022

Gunite
Gunite Clevis
Aftermarket
Kit Part
Part Number
Number
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143
AS1144
AS1145
AS1146
AS1147
AS1148
AS1149
AS1150
AS1151
AS1152
AS1153
AS1154
AS1155
AS1156
AS1157
AS1159
AS1160
AS1161
AS1162
AS1163
AS1164
AS1165
AS1166
AS1167
AS1168
AS1169
AS1170
AS1171
AS1172
AS1173
AS1174
AS1175
AS1176
AS1179
AS3000
AS3001
AS3002
AS3003
AS3016
AS3017
AS3011
AS3012
AS3013
AS3015
AS3016
AS3017
AS3018
AS3019
AS3021
AS3022

(6) For 5.5" arm lengths only.


(7) For 6.5" arm lengths only.

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Gunite Production to Gunite Aftermarket (continued)


Gunite
Production
Part Number
SAS3023
SAS3024
SAS4001
SAS4004
SAS4005
SAS4006
SAS4007
SAS4008
SAS4012
SAS4013
SAS4014
SAS4015

Gunite
Gunite Clevis
Aftermarket
Kit Part
Part Number
Number
AS3023
AS3024
AS4001
AS4004
AS4005
AS4006
AS4007
AS4008
AS4012
AS4013
AS4014
AS4015

(6) For 5.5" arm lengths only.


(7) For 6.5" arm lengths only.

10

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Arvin Meritor
1227S1553
2245D1200
A2-3275-N1079
A13-3275M1079
A15-3275M1079
A18-3275M1079
A24-3275M1079
A26 3275M1079
A27-3275M1079
A28-3275M1079
A30-3275M1079
A31-3275M1079
A32-3275M1079
A34-3275M1079
A35-3275M1079

SD06301
SD06201
SA03101
SA10102
SA10502
SA08903
SA08902
SA08502
SA09802
SA08103
SA08102
SA10202
SA10802
SA08104
SA10204
SA10202
SA09902
SA10203
SA07701
SA08903
SA09902
SA09903
SA10002
SA02101
SA11003
SA02201
SA11103
SA02104
SA11102
SA02105

055-011-05
055-040-04
055-040-05

SA02101
SA02201
SA05802

1191037
1191037
1191037

SA02201
SA05802
SA10803

AS1138
AS1138
AS1140
AS1041 (8)
AS1140 (8)
AS1140 (8)
AS1040 (8)
AS1041
AS1040
AS1140
AS1040 (8)
AS1042
AS1142
AS1140
AS1132
AS1141
AS4013
AS1041 (8)
AS1132
AS1133
AS1136
AS1133
AS1033 (8)
AS1141
AS1041 (8)
AS1132
AS1040 (8)
AS1134

Dexter Axle
AS1133
AS1141
AS1041 (8)

Dorsey Trailer
AS1141
AS1041 (8)
AS1041 (8)

Ford Motor Company


87HU2314AA
E7HZ2314A
E9HT2308B
E9HT2308BA
E9HT2308BB
E9HT2314AA
E9HT2314BA
E9HT2314BB
E9HZ2308B
E9HZ2314B
F1HS2314AA
F2HS-2N038-CA
F2HS-2N038-DA
F2HS-9825-CA
F2HS-9825-DA
F2HS2308BA
F2HS2308CA
F2HS2308DA
F2HS2314CA

SA02203
SA02203
SA03101
SA03401
SA04101
SA03602
SA03601
SA04201

SA04203
SD05001
SD00601
SD00501
SD00701
SA04801
SA04802
SA04803
SA04701

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Ford Motor Company (continued)

Dana Corporation
25QD51
25QD51P2
25QD51P3
25QD365
25QD415
974294
974295
974296
M16WR1331
M16WR1331
M16WR1332
M16WR1332
M16WR1333
M16WR1334
M16WR1335

OEM Part Number

AS1140
AS1140
AS1138
AS1138
AS1138
AS1141
AS1140
AS1140
AS1138
AS1140
AS1139
AS4006
AS4006
AS4006
AS4006
AS1039
AS1040
AS1041
AS1037

F2HS2314DA
F2HS2314EA
F8HT2314AA
F8HT2314BA
F8HZ2308AA
F8HZ2314AA
F8HZ2314BA
F8HZ2N220AA

SA04702
SA04703
SA10502
SA10503
SAS1046
SAS1047
SAS1058
SAS3019

AS1038
n/a
AS1140
AS1141
AS1138
AS1140
AS1141
AS3019

Freightliner LLC
6814100849
6814200849
6814201949
6814202049
6814202149
6814205538
6814205539
6814205638
6814205738
6814230050
76404-3410
76404-3412
76404-3413
76401-3509
76401-3510
76401-3505
76401-3506
76401-3508
76401-3526
76401-3527
F8HT 2314 AA
F8HT 2314 BA
GUN AS1031
GUN AS1032
GUN AS1033
GUN AS1034
GUN AS1035
GUN AS1036
GUN AS1037
GUN AS1038
GUN AS1039
GUN AS1040
GUN AS1041
GUN AS1042
GUN AS1043
GUN AS1044
GUN AS1045
GUN AS1131
GUN AS1132
GUN AS1133
GUN AS1134
GUN AS1135
GUN AS1136
GUN AS1137
GUN AS1138
GUN AS1139
GUN AS1140
GUN AS1141
GUN AS1142
GUN AS1143
GUN AS1144

SA03101
SA03101
SA02204
SA02212
SA02213
SA02701
SA02701
SA02203
SA02104
SD04401
SD06201
SA07702
SA07701
SA10203
SA10204
SA09902
SA09903
SA10202
SA09502
SA09802
SA10502
SA10503

AS1138
AS1138
AS1142
AS1157
AS1157
AS1136
AS1136
AS1140
AS1132
AS3000
n/a
n/a
n/a
AS1141
AS1142
AS1132
AS1133
AS1140
AS1156
AS1040 (8)
AS1140
AS1141
AS1031
AS1032
AS1033
AS1034
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045
AS1131
AS1132
AS1133
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143
AS1144

Gunite Production part numbers that are shaded are for reference only, and used only on original equipment installation.
(8) Consult either the Numerical Listing or the Gunite Production to Gunite Aftermarket Part Number listings to determine the appropriate Gunite Clevis Kit required.

11

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

OEM Part Number

Freightliner LLC (continued)


GUN AS1145
GUN AS1146
GUN AS1147
GUN AS1148
GUN AS1149
GUN AS1150
GUN AS1151
GUN AS1152
GUN AS1153
GUN AS1154
GUN AS1155
GUN AS1156
GUN AS1157
GUN AS1159
GUN AS1160
GUN AS1161
GUN AS1162
GUN AS1163
GUN AS1164
GUN AS1165
GUN AS1166
GUN AS1167
GUN AS1168
GUN AS1169
GUN AS1170
GUN AS1171
GUN AS1172
GUN AS1173
GUN AS1174
GUN AS1175
GUN AS1176
GUN AS1179
GUN AS3000
GUN AS3001
GUN AS3002
GUN AS3003
GUN AS3011
GUN AS3012
GUN AS3013
GUN AS3015
GUN AS3016
GUN AS3017
GUN AS3018
GUN AS3019
GUN AS3021
GUN AS3022
GUN AS3023
GUN AS3024
GUN AS4001
GUN AS4004
GUN AS4005
GUN AS4006
GUN AS4007
GUN AS4008
GUN AS4012
GUN AS4013
GUN AS4014
GUN AS4015

AS1145
AS1146
AS1147
AS1148
AS1149
AS1150
AS1151
AS1152
AS1153
AS1154
AS1155
AS1156
AS1157
AS1159
AS1160
AS1161
AS1162
AS1163
AS1164
AS1165
AS1166
AS1167
AS1168
AS1169
AS1170
AS1171
AS1172
AS1173
AS 1174
AS1175
AS1176
AS1179
AS3000
AS3001
AS3002
AS3003
AS3011
AS3012
AS3013
AS3015
AS3016
AS3017
AS3018
AS3019
AS3021
AS3022
AS3023
AS3024
AS4001
AS4004
AS4005
AS4006
AS4007
AS4008
AS4012
AS4013
AS4014
AS4015

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Freightliner LLC (continued)


GUNASA02110
GUNASA02111
GUNASD06001
GUNASD06001
GUNASD06201
GUNASD06202
GUNASD06301
GUNASF00301
GUNASF01502
GUNSA085 02
GUNSA089 02
GUNSA095 02
GUNSA098 02
GUNSA099 02
GUNSA099 03
GUNSA100 02
GUNSA102 02
GUNSA102 03
GUNSA11602
GUNSA11603
GUNSA11702
GUNSA11902
GUNSA11903
GUNSD004 01
GUNSD004 02
GUNSD006 01
GUNSD006 02

SA02110
SA02111
SD06001
SD06001
SD06201
SD06202
SD06301
SA01501
SA07501
SA08502
SA08902
SA09502
SA09802
SA09902
SA09903
SA10002
SA10202
SA10203
SA11602
SA11603
SA11702
SA11902
SA11903
SD00401
SD00402
SD00601
SD00602

AS1156
AS1156

AS3003
AS3016
AS1040 (8)
AS1040 (8)
AS1156
AS1040 (8)
AS1132
AS1133
AS1136
AS1140
AS1141
AS1146
AS1033 (8)
AS1170
AS1172
AS1173

Fruehauf Corporation
00-20105
00-20106
00-20114
00-20115
00-20116
00-20124
00-20125
00-20126
ACF004205810
ACF004205828
ACF004205937
ACF004205810
ACF004205828
ACF004205837
ACF3411-1
ACF3411-2
ACF3411-2
ANB25191

SA01201
SA01101
SA01302
SA01202
SA01002
SA01303
SA01203
SA01103
SA02402
SA02502
SA02601
SA09103
SA09203
SA09302
SA02301
SA05601
SA02302
SA05901

AS1040 (8)
AS1032 (8)
AS1044 (8)
AS1041 (8)
AS1043 (8)
AS1045 (8)
AS1042 (8)
AS1034 (8)
AS1133
AS1141
AS1043 (8)
AS1033 (8)
AS1041 (8)
AS1043 (8)
AS1044 (8)
AS1043 (8)
AS1043 (8)
AS1143

Great Dane Trailer


42521
40501501
40501502
40501502
40501502

SA02201
SA05802
SA05801
SA10803
SA10802

AS1141
AS1041 (8)
AS1040 (8)
AS1041 (8)
AS1040 (8)

Hendrickson Trailer Suspension


A-15156
A-15189
A-8651
A-14767
A-14768
006126

SA09903
SA10602
SA10603
SA10802
SA10803
SA10101

AS1133
AS1146
AS1033 (8)
AS1040 (8)
AS1041 (8)
AS1137

Gunite Production part numbers that are shaded are for reference only, and used only on original equipment installation.
(8) Consult either the Numerical Listing or the Gunite Production to Gunite Aftermarket Part Number listings to determine the appropriate Gunite Clevis Kit required.

12

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Hyundai Translead
10000031
10000033
10000083
10000084
10009560
10007048
10010717
10010800
10010801
10010802
10012509

SA10803
SA10802
SD00402
SD00602
SA07601
SD02801
SA10602
SA10603
SA07801
SA07601
SA10903
SA01401
SA01701
SA01501
SA01601

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

International Truck & Engine (continued)


AS1041 (8)
AS1040 (8)

AS3018
AS1146
AS1033 (8)
AS1031
AS3018
AS1144

International Truck & Engine


2014290C1
2014291C1
2014292C1
2014293C1
ZBRAS1031
ZBRAS1032
ZBRAS1033
ZBRAS1034
ZBRAS1035
ZBRAS1036
ZBRAS1037
ZBRAS1038
ZBRAS1039
ZBRAS1040
ZBRAS1041
ZBRAS1042
ZBRAS1043
ZBRAS1044
ZBRAS1045
ZBRAS1131
ZBRAS1132
ZBRAS1133
ZBRAS1134
ZBRAS1135
ZBRAS1136
ZBRAS1137
ZBRAS1138
ZBRAS1139
ZBRAS1140
ZBRAS1141
ZBRAS1142
ZBRAS1143
ZBRAS1144
ZBRAS1145
ZBRAS1146
ZBRAS1147
ZBRAS1148
ZBRAS1149
ZBRAS1150
ZBRAS1151
ZBRAS1152
ZBRAS1153
ZBRAS1154
ZBRAS1155
ZBRAS1156
ZBRAS1157
ZBRAS1159

OEM Part Number

AS3000
AS3001
AS3003
AS3002
AS1031
AS1032
AS1033
AS1034
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045
AS1131
AS1132
AS1133
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143
AS1144
AS1145
AS1146
AS1147
AS1148
AS1149
AS1150
AS1151
AS1152
AS1153
AS1154
AS1155
AS1156
AS1157
AS1159

ZBRAS1160
ZBRAS1161
ZBRAS1162
ZBRAS1163
ZBRAS1164
ZBRAS1165
ZBRAS1166
ZBRAS1167
ZBRAS1168
ZBRAS1169
ZBRAS1170
ZBRAS1171
ZBRAS1172
ZBRAS1173
ZBRAS1174
ZBRAS1175
ZBRAS1176
ZBRAS1179
ZBRAS3000
ZBRAS3001
ZBRAS3002
ZBRAS3003
ZBRAS3011
ZBRAS3012
ZBRAS3013
ZBRAS3015
ZBRAS3016
ZBRAS3017
ZBRAS3018
ZBRAS3019
ZBRAS3021
ZBRAS3022
ZBRAS3023
ZBRAS3024
ZBRAS4001
ZBRAS4004
ZBRAS4005
ZBRAS4006
ZBRAS4007
ZBRAS4008
ZBRAS4012
ZBRAS4013
ZBRAS4014
ZBRAS4015
3820002201
3820002203
3820007202
3820010802
3820010803

SA02201
SA02203
SA07203
SA10802
SA10803

AS1160
AS1161
AS1162
AS1163
AS1164
AS1165
AS1166
AS1167
AS1168
AS1169
AS1170
AS1171
AS1172
AS1173
AS 1174
AS1175
AS1176
AS1179
AS3000
AS3001
AS3002
AS3003
AS3011
AS3012
AS3013
AS3015
AS3016
AS3017
AS3018
AS3019
AS3021
AS3022
AS3023
AS3024
AS4001
AS4004
AS4005
AS4006
AS4007
AS4008
AS4012
AS4013
AS4014
AS4015
AS1141
AS1140
AS1041 (8)
AS1040 (8)
AS1041 (8)

Mack Trucks Incorporated


25QD51
25QD51P2
25QD51P3
25QD365
25QD365P3
25QD415
25QD419
25QD419P2
25QD419P3

SA10202
SA09902
SA10203
SA07701
SA07703
SA08903
SA11602
SA11902
SA11603

AS1140
AS1132
AS1141
AS4013
n/a
AS1041 (8)
AS1168
AS1172
AS1169

Gunite Production part numbers that are shaded are for reference only, and used only on original equipment installation.
(8) Consult either the Numerical Listing or the Gunite Production to Gunite Aftermarket Part Number listings to determine the appropriate Gunite Clevis Kit required.

13

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Mack Trucks Incorporated (continued)


25QD419P4
3398-AS1031
3398-AS1032
3398-AS1033
3398-AS1034
3398-AS1035
3398-AS1036
3398-AS1037
3398-AS1038
3398-AS1039
3398-AS1040
3398-AS1041
3398-AS1042
3398-AS1043
3398-AS1044
3398-AS1045
3398-AS1131
3398-AS1132
3398-AS1133
3398-AS1134
3398-AS1135
3398-AS1136
3398-AS1137
3398-AS1138
3398-AS1139
3398-AS1140
3398-AS1141
3398-AS1142
3398-AS1143
3398-AS1144
3398-AS1145
3398-AS1146
3398-AS1147
3398-AS1148
3398-AS1149
3398-AS1150
3398-AS1151
3398-AS1152
3398-AS1153
3398-AS1154
3398-AS1155
3398-AS1156
3398-AS1157
3398-AS1159
3398-AS1160
3398-AS1161
3398-AS1162
3398-AS1163
3398-AS1164
3398-AS1165
3398-AS1166
3398-AS1167
3398-AS1168
3398-AS1169
3398-AS1170
3398-AS1171
3398-AS1172
3398-AS1173
3398-AS1174
3398-AS1175
3398-AS1176

SA11903

AS1173
AS1031
AS1032
AS1033
AS1034
AS1035
AS1036
AS1037
AS1038
AS1039
AS1040
AS1041
AS1042
AS1043
AS1044
AS1045
AS1131
AS1132
AS1133
AS1134
AS1135
AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143
AS1144
AS1145
AS1146
AS1147
AS1148
AS1149
AS1150
AS1151
AS1152
AS1153
AS1154
AS1155
AS1156
AS1157
AS1159
AS1160
AS1161
AS1162
AS1163
AS1164
AS1165
AS1166
AS1167
AS1168
AS1169
AS1170
AS1171
AS1172
AS1173
AS 1174
AS1175
AS1176

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Mack Trucks Incorporated (continued)


3398-AS1179
3398-AS3000
3398-AS3001
3398-AS3002
3398-AS3003
3398-AS3011
3398-AS3012
3398-AS3013
3398-AS3015
3398-AS3016
3398-AS3017
3398-AS3018
3398-AS3019
3398-AS3021
3398-AS3022
3398-AS3023
3398-AS3024
3398-AS4001
3398-AS4004
3398-AS4005
3398-AS4006
3398-AS4007
3398-AS4008
3398-AS4012
3398-AS4013
3398-AS4014
3398-AS4015

AS1179
AS3000
AS3001
AS3002
AS3003
AS3011
AS3012
AS3013
AS3015
AS3016
AS3017
AS3018
AS3019
AS3021
AS3022
AS3023
AS3024
AS4001
AS4004
AS4005
AS4006
AS4007
AS4008
AS4012
AS4013
AS4014
AS4015

Peterbilt Motors Corporation


10480701
10480801
02-01736
02-02245
03-05136
03-05229
03-05459
03-06008

SA02104
SA02203
SA02701
SA02701
SA02203
SA02203
SA02204
SA02104

046034700100

SA10802

AS1132
AS1140
AS1136
AS1136
AS1140
AS1140
AS1142
AS1132

Stoughton
AS1149

Strick Corporation
03637/16167
R21097003
R21097004

SA05801
SA02203
SA02201

AS1040 (8)
AS1140
AS1141

Trailmobile Incorporated
17A23127
17A2314355
17A2314355
17A2314360
4017A23665

SA02203
SA07202
SA10802
SA10803
SA02201

AS1140
AS1040 (8)
AS1040 (8)
AS1041 (8)
AS1141

Volvo Trucks North America


1090339
1090340
1090341
1090342
1090343
1090344
1090345
1091671
1092019
1092020
1099346

AS1033
AS1041
AS1044
AS1032
AS1040
AS3000
AS3001
AS1038
AS1040
AS1038
AS4001

Gunite Production part numbers that are shaded are for reference only, and used only on original equipment installation.
(8) Consult either the Numerical Listing or the Gunite Production to Gunite Aftermarket Part Number listings to determine the appropriate Gunite Clevis Kit required.

14

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Volvo Trucks North America (continued)


20434458
20527305
20527306
20527307
20714924
20714928
3918358
3918359
3918360
3918361
3918364
3918977
3919764
3919765
3936094
3936096
3936102
3936103
3947846
3947847
3947848
3947849
3948150
3948970
3949413
3949441
3949442
76401-0100
76401-0103
76401-0110
76401-0111
76401-0134
76401-0149
76401-3805
76401-3806
76403-0003
76403-0004
8060850
8060851
8060852
8060853
8060858
8060859
8060999
8061000
8084128
8084129
8084131
8084132
8084133
8084136
8084138
8160525
8160526

SA10204
SA11602
SA11702
SA11902
AS11903
SA11603

SA00105
SA00102
SA01701
SA01401

SA02201
SA02101
SA02203
SA02701
SA02104
SA03101
SA02104
SA02204
SD04401
SD04402
SA02101
SA02104
SA03101
SA02701
SA02201
SA02203
SA02212
SA02213
SA09903
SA09902
SA10002
SA10203
SA10202
SD06301
SD06203
SD06002
SD06001

AS1142
AS1032
AS1170
AS1172
AS1173
AS1169
AS1032
AS1034
AS1040
AS1042
AS3000
AS3001
AS3003
AS3002
AS1036
AS1032
AS3001
AS3000
AS1033
AS1032
AS1036
AS1041
AS1040
AS1038
AS1042
AS1034
AS1044
AS1141
AS1133
AS1140
AS1136
AS1132
AS1138
AS1132
AS1142
AS3000
AS3001
AS1133
AS1132
AS1138
AS1136
AS1141
AS1140
AS1157
AS1157
AS1133
AS1132
AS1136
AS1141
AS1140
n/a
n/a
AS4011
AS4010

OEM Part Number

Gunite Production
Part Number

Gunite
Aftermarket
Part Number

Western Star Truck (continued)


76401-3462
76401-3469
76401-3498
76401-3499
76401-3501
76401-3502
76401-3505
76401-3506
76401-3507
76401-3508
76401-3509
76401-3510

SA02203
SA03101
SA06402
SA06403
SA06602
SA07002
SA09902
SA09903
SA10002
SA10202
SA10203
SA10204

AS1140
AS1138
AS1132
AS1133
AS1136
AS1140
AS1132
AS1133
AS1136
AS1140
AS1141
AS1142

Wabash National Corporation


10600055
10600059
10600361

SA02201
SA10802
SA05502

AS1141
AS1149
AS1041 (8)

Western Star Truck


76401-3455
76401-3457

SA02104
SA02701

AS1132
AS1136

Gunite Production part numbers that are shaded are for reference only, and used only on original equipment installation.
(8) Consult either the Numerical Listing or the Gunite Production to Gunite Aftermarket Part Number listings to determine the appropriate Gunite Clevis Kit required.

15

PRODUCTS CATALOG
CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Bendix Corporation
065162
065163
065163
065164

AS1035
AS1036
AS1153
AS1036

065164
065166
065167

AS1136
AS1037
AS1038

065167
065168
065169
065169
065170

AS1138
AS1031
AS1032
AS1156
AS1032

065170
065172

AS1132
AS1033

065172
065173
065174

AS1133
AS1039
AS1040

065174
065175

AS1140
AS1041

065175
065176

AS1141
AS1041

065176
065177

AS1141
AS1044

065178

AS1043

065179

AS1044

065182

AS1043

065221

AS1040

065221
065244
065244
065245
065247

AS1140
AS1036
AS1152
AS1040
AS1040

065247
065274

AS1140
AS1038

065274
065276
065306
065306
065335

AS1138
AS1041
AS1038
AS1154
AS1038

065335
065344

AS1138
AS1033

065344
065403

AS1133
AS1038

065403
065488
065508

AS1138
AS1032
AS1031

065508
065700

AS1131
AS1032

065700
101261

AS1132
AS1040

Requires the use of AS3002 clevis kit.

Gunite
Aftermarket
Part Number

Bendix Corporation (continued)

Requires the use of AS3003 clevis kit.

101261
101262

AS1140
AS1040

Requires the use of either AS3001 or AS3017


clevis kits.

101262
101453

AS1140
AS1036

Requires the use of AS3002 clevis kit.

101453
101454

AS1136
AS1036

101454
101539

AS1136
AS1036

101539
101540

AS1136
AS1036

101540
101628
101628
101629
101629
101769

AS1136
AS1032
AS1156
AS1032
AS1156
AS1040

101769
101770

AS1140
AS1040

101770
106900
106902
106194

AS1140
AS1039
AS1039
AS1033

106194
106195

AS1133
AS1032

106195
106196
106197
106197
106198
106198
106201

AS1132
AS1031
AS1036
AS1153
AS1036
AS1153
AS1041

106201
106202

AS1141
AS1044

106203

AS1036

106203
106204

AS1136
AS1040

Requires the use of AS3002 clevis kit.

106204
106205

AS1140
AS1032

Requires the use of either AS3001 or AS3017


clevis kits.

106205
106206

AS1132
AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

106206
106207

AS1136
AS1040

Requires the use of either AS3000 or AS3016


clevis kits.

106207
106208
106208
106209
106209
106321
106321
106322
106322
106901

AS1140
AS1036
AS1152
AS1036
AS1152
AS1032
AS1156
AS1032
AS1156
AS1031

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3002 clevis kit.

Requires the use of AS3003 clevis kit.


Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Special Information

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3001 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3001 clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

16

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Bendix Corporation (continued)


106903
106905
106906
106908
106926

AS1037
AS1037
AS1037
AS1037
AS1041

106926
107100

AS1141
AS1033

107100
107101

AS1133
AS1041

107101
107102

AS1141
AS1044

107103

AS1032

107103
107104

AS1132
AS1036

107104
107105

AS1136
AS1040

107105
107106

AS1140
AS1032

107106
107107

AS1132
AS1036

107107
107108

AS1136
AS1040

107108
107109
107110
107111
107112
107113
107113
107114
107114
107115
107115
107116
107116
107117
107117
107118
107118
107120
107122
107124
107126
107127

AS1140
AS1031
AS1039
AS1031
AS1039
AS1036
AS1153
AS1036
AS1152
AS1032
AS1156
AS1036
AS1153
AS1036
AS1152
AS1032
AS1156
AS1037
AS1037
AS1037
AS1037
AS1041

107127
107142

AS1141
AS1038

107142
107143

AS1138
AS1040

107143
107144

AS1140
AS1040

107144
107176

AS1140
AS1032

107176

AS1132

Requires the use of AS3002 clevis kit.

Gunite
Aftermarket
Part Number

Bendix Corporation (continued)


107177

AS1036

107177
107178

AS1136
AS1038

Requires the use of either AS3000 or AS3016


clevis kits.

107178
107179

AS1138
AS1040

Requires the use of either AS3000 or AS3016


clevis kits.

107179
107246

AS1140
AS1038

Requires the use of either AS3000 or AS3016


clevis kits.

107246
107247

AS1138
AS1038

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

107247
107254

AS1138
AS1043

107256

AS1038

Requires the use of either AS3001 or AS3017


clevis kits.

107256
107262

AS1138
AS1032

Requires the use of either AS3000 or AS3016


clevis kits.

107262
107263

AS1132
AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

107263
107264

AS1136
AS1044

Requires the use of either AS3001 or AS3017


clevis kits.

107265

AS1044

107267

AS1036

107267
107269
107270

AS1136
AS1037
AS1038

107270
107271
107272
107272
107273

AS1138
AS1031
AS1032
AS1156
AS1032

107273
107274

AS1132
AS1033

107274
107275
107276

AS1133
AS1039
AS1040

107276
107277

AS1140
AS1041

107277
107278

AS1141
AS1041

Requires the use of AS3002 clevis kit.

107278
107279

AS1141
AS1044

Requires the use of either AS3000 or AS3016


clevis kits.

107280

AS1043

107281

AS1044

Requires the use of AS3002 clevis kit.


Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3001 clevis kit.
Requires the use of AS3001 clevis kit.
Requires the use of AS3001 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.

Requires the use of either AS3001 or AS3017


clevis kits.

Special Information

107297

AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

107297
107297

AS1136
AS1032

Requires the use of either AS3000 or AS3016


clevis kits.

107297
107400

AS1132
AS1033

Requires the use of either AS3000 or AS3016


clevis kits.

107400
107401

AS1133
AS1033

Requires the use of either AS3001 or AS3017


clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits. Check Spline diameter.
Check Spline diameter.
Requires the use of either AS3000 or AS3016
clevis kits. Check Spline diameter.
Check Spline diameter.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

17

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Bendix Corporation (continued)


107401
107402

AS1133
AS1040

107402
107403

AS1140
AS1040

107403
107407

AS1140
AS1043

107408

AS1043

107409

AS1043

107420

AS1038

107420
107421

AS1138
AS1040

107421
107477

AS1140
AS1036

107477
107536

AS1136
AS1040

107536
107687

AS1140
AS1040

107687
107688

AS1140
AS1040

107688
107689

AS1140
AS1040

107689
107729
107729
107730
107730
107734
107735
107736

AS1140
AS1036
AS1152
AS1036
AS1152
AS1040
AS1040
AS1041

107736
107739

AS1141
AS1040

107739
107772

AS1140
AS1041

107772
107773

AS1141
AS1041

107773
107774
107775
107787

AS1141
AS1041
AS1041
AS1041

107787
107788

AS1141
AS1040

107788
107789
107790
107907
107944

AS1140
AS1040
AS1040
AS1031
AS1033

107944
107991

AS1133
AS1040

107991
107992

AS1140
AS1038

Gunite
Aftermarket
Part Number

Bendix Corporation (continued)


107992
107993

AS1138
AS1033

107993
107994

AS1133
AS1041

107994
107995

AS1141
AS1032

107995
107996

AS1132
AS1040

107996
107997

AS1140
AS1040

Requires the use of either AS3000 or AS3016


clevis kits.

107997
107998

AS1140
AS1036

Requires the use of either AS3001 or AS3017


clevis kits.

107998
107999

AS1136
AS1032

Requires the use of either AS3000 or AS3016


clevis kits.

107999
108000

AS1132
AS1038

108000
108001
108068

AS1138
AS1031
AS1040

108068
108091

AS1140
AS1041

108091
108092

AS1141
AS1033

Requires the use of AS3002 clevis kit.

108092
108093

AS1133
AS1041

Requires the use of AS3002 clevis kit.

108093
108117

AS1141
AS1041

108117
108118

AS1141
AS1040

108118
108119
108120
108292
108292
108293
108293
108371

AS1140
AS1040
AS1040
AS1038
AS1154
AS1038
AS1154
AS1040

108371
108430

AS1140
AS1041

108430
108431

AS1141
AS1033

108431
108555

AS1133
AS1038

108555
108617

AS1138
AS1033

108617
108644

AS1133
AS1036

108644
108645

AS1136
AS1040

108645

AS1140

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Requires the use of either AS3001 or AS3017


clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3002 clevis kit.

Requires the use of AS3002 clevis kit.


Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3001 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Special Information

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

18

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Bendix Corporation (continued)


108646

AS1038

108646
108647

AS1138
AS1032

108647
108966
108966
108967
108967
108974

AS1132
AS1038
AS1154
AS1038
AS1154
AS1038

108974
109038

AS1138
AS1038

109038
109271
109272
109277
109277
109278
108278
109357

AS1138
AS1032
AS1032
AS1038
AS1154
AS1038
AS1154
AS1031

109357
109344
109344
109345
109345
109516
109517
109517
109518

AS1131
AS1032
AS1156
AS1032
AS1156
AS1040
AS1038
AS1154
AS1040

109518
109519

AS1140
AS1041

109519
109627
109628
131026

AS1141
AS1041
AS1041
AS1032

131026
289304
289304
289305
289305
289312

AS1132
AS1036
AS1152
AS1036
AS1152
AS1041

289312
289313

AS1141
AS1041

289313
289314

AS1141
AS1040

289314
289315

AS1140
AS1040

289315
289325

AS1140
AS1044

289652

AS1033

289652
289653

AS1133
AS1033

289653

AS1133

Requires the use of either AS3000 or AS3016


clevis kits.

Gunite
Aftermarket
Part Number

Bendix Corporation (continued)


289654

AS1032

289654
289655

AS1132
AS1032

289655
289741

AS1132
AS1033

Requires the use of AS3002 clevis kit.

289741
289742

AS1133
AS1033

Requires the use of either AS3001 or AS3017


clevis kits.

289742
289746

AS1133
AS1032

Requires the use of either AS3001 or AS3017


clevis kits.

289746
289747

AS1132
AS1032

Requires the use of AS3003 clevis kit.

289747
289748

AS1132
AS1032

289748
289749

AS1132
AS1032

289749
289933

AS1132
AS1041

289933
289934

AS1141
AS1041

289934
5001334

AS1141
AS1036

Requires the use of AS3002 clevis kit.

5001334
801351

AS1136
AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

801351
801352

AS1136
AS1031

Requires the use of either AS3000 or AS3016


clevis kits.

801352
801353

AS1131
AS1032

801353
801354

AS1132
AS1039

Requires the use of either AS3000 or AS3016


clevis kits.

801354
801355

AS1139
AS1040

Requires the use of AS3002 clevis kit.

801355
801356
801357
801358
801359

AS1140
AS1041
AS1037
AS1032
AS1035

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of AS3002 clevis kit.

Requires the use of AS3003 clevis kit.


Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.
Requires the use of AS3002 clevis kit.

Requires the use of AS3002 clevis kit.


Requires the use of AS3002 clevis kit.

Requires the use of AS3002 clevis kit.


Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Special Information

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of AS3001 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of AS3003 clevis kit.
Requires the use of AS3003 clevis kit.

Crewson Industries
CB21102

AS1032

CB21102
CB21102

AS1132
AS1034

CB21102
CB21103

AS1134
AS1031

CB21103
CB21103

AS1131
AS1033

CB21103
CB21104

AS1133
AS1033

CB21104
CB21182

AS1133
AS1032

CB21182

AS1132

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

19

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Crewson Industries (continued)


CB21182

AS1034

CB21182
CB21184

AS1134
AS1033

CB21184
CB21183

AS1133
AS1031

CB21183
CB21183

AS1131
AS1033

CB21183
CB21952

AS1133
AS1032

CB21952
CB21952

AS1132
AS1034

CB21952
CB21953

AS1134
AS1031

CB21953
CB21953

AS1131
AS1033

CB21953
CB22102

AS1133
AS1040

CB22102
CB22102

AS1140
AS1042

CB22102
CB22103

AS1142
AS1039

CB22103
CB22103

AS1139
AS1041

CB22103
CB22104

AS1141
AS1041

CB22104
CB22182

AS1141
AS1040

CB22182
CB22182

AS1140
AS1042

CB22182
CB22183

AS1142
AS1039

CB22183
CB22183

AS1139
AS1041

CB22183
CB22184

AS1141
AS1041

CB22184
CB22952

AS1141
AS1040

CB22952
CB22952

AS1140
AS1042

CB22952
CB22953

AS1142
AS1039

CB22953
CB22953

AS1139
AS1041

CB22953
CB23102

AS1141
AS1043

CB23102
CB23106

AS1143
AS1044

CB23106

AS1144

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

Gunite
Aftermarket
Part Number

Crewson Industries (continued)


CB23952

AS1043

CB23952
CB23952

AS1143
AS1045

CB23952
CB23953

AS1145
AS1044

CB23953
CB24102

AS1144
AS1036

CB24102
CB24103

AS1136
AS1035

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

CB24103
CB24300
CB25102

AS1135
AS1036
AS1038

Requires the use of either AS3000 or AS3016


clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.

CB25102
CB25103

AS1138
AS1037

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.

CB25103
CB25300
CB34100

AS1137
AS1038
AS1036

CB34100
CB34200

AS1136
AS1036

CB34200
CB35100

AS1136
AS1038

CB35100
CB35200

AS1138
AS1038

CB35200
CB41100

AS1138
AS1032

CB41100
CB41101

AS1132
AS1034

CB41101
CB41106

AS1134
AS1033

CB41106
CB41180

AS1133
AS1032

CB41180
CB41186

AS1132
AS1033

CB41186
CB42100

AS1133
AS1040

CB42100
CB42101

AS1140
AS1042

CB42101
CB42106

AS1142
AS1041

CB42106
CB42180

AS1141
AS1040

CB42180
CB42186

AS1140
AS1041

CB42186
CB43100

AS1141
AS1043

CB43100
CB43106

AS1143
AS1044

CB43106

AS1144

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits.

Special Information

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of AS3003 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of AS3003 clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

20

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Crewson Industries (continued)


CB43180

AS1043

CB43180
CB43186

AS1143
AS1044

CB43186
CB71100

AS1144
AS1032

CB71100
CB71106

AS1132
AS1033

CB71106
CB72100

AS1133
AS1040

CB72100
CB72106

AS1140
AS1041

CB72106
CB73106

AS1141
AS1044

CB73106
CI21102

AS1144
AS1032

CI21102
CI21102

AS1132
AS1034

CI21102
CI211A2

AS1134
AS1032

CI211A2
CI211A2

AS1132
AS1034

CI211A2
CI21103

AS1134
AS1031

CI21103
CI21103

AS1131
AS1033

CI21103
CI211A3

AS1133
AS1031

CI211A3
CI211A3

AS1131
AS1033

CI211A3
CI22102

AS1133
AS1040

CI22102
CI22102

AS1140
AS1042

CI22102
CI221A2

AS1142
AS1040

CI221A2
CI221A2

AS1140
AS1042

CI221A2
CI22103

AS1142
AS1039

CI22103
CI22103

AS1139
AS1041

CI22103
CI22122

AS1141
AS1178

CI221A3

AS1039

CI221A3
CI221A3

AS1139
AS1041

CI221A3
CI23103

AS1141
AS1044

Gunite
Aftermarket
Part Number

Crewson Industries (continued)

Requires the use of either AS3000 or AS3016


clevis kits.

CI23103
CI24102

AS1144
AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

CI24102
CI24103

AS1136
AS1035

Requires the use of either AS3000 or AS3016


clevis kits.

CI24103
CI25102

AS1135
AS1038

Requires the use of either AS3000 or AS3016


clevis kits.

CI25102
CI25103

AS1138
AS1037

Requires the use of either AS3000 or AS3016


clevis kits.

CI25103
CI34100

AS1137
AS1036

Requires the use of either AS3000 or AS3016


clevis kits.

CI34100
CI34200

AS1136
AS1038

Requires the use of either AS3000 or AS3016


clevis kits.

CI34200
CI41100

AS1138
AS1032

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

CI41100
CI411A0

AS1132
AS1032

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

CI411A0
CI41106

AS1132
AS1033

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

CI41106
CI411A6

AS1133
AS1033

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

CI411A6
CI42100

AS1133
AS1040

Requires the use of either AS3000 or AS3016


clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.

CI42100
CI421A0

AS1140
AS1040

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.

CI421A0
CI42106

AS1140
AS1041

Requires the use of either AS3000 or AS3016


clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.

CI42106
CI421A6

AS1141
AS1041

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.

CI421A6
CI43100

AS1141
AS1043

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

CI43100
CI43106

AS1143
AS1044

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

CI43106
CI71100

AS1144
AS1032

Requires the use of either AS3000 or AS3016


clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.

CI71100
CI71106

AS1132
AS1033

Requires the use of either AS3000 or AS3016


clevis kits. 6.5 inch arm length only.
6.5 inch arm length only.

CI71106
CI72100

AS1133
AS1040

Requires the use of either AS3000 or AS3016


clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.

CI72100
CI72106

AS1140
AS1041

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.

CI72106
CI73106

AS1141
AS1044

Requires the use of a clevis with a 1.3 pin


center distance. For 5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.

CI73106

AS1144

52510
52510
52511
52511
52512
52512

AS1032
AS1132
AS1033
AS1133
AS1032
AS1132

Requires the use of either AS3000 or AS3016


clevis kits. 6.0 inch arm length only.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 6.0 inch arm length only.

Special Information

6.0 inch arm length only.


Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.5 inch arm length only.
5.5 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits. 5.0 inch arm length only.
5.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Eagle
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

21

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Eagle (continued)
52513
52513
52528
52528
52529
52529
52530
52530
52538
52538

AS1036
AS1136
AS1040
AS1140
AS1041
AS1141
AS1040
AS1140
AS1044
AS1144

808140

AS1033

Requires the use of a Gunite clevis kit.

808141

AS1040

808141

AS1042

808142

AS1039

808142

AS1041

808143

AS1032

808143

AS1034

808147

AS1038

808148

AS1033

808149

AS1041

808150

AS1031

808150

AS1033

808151

AS1040

808151

AS1042

808152

AS1032

808156

AS1032

808157

AS1032

808158

AS1036

808159

AS1036

808160

AS1036

808161

AS1031

808161

AS1033

808162

AS1032

808162

AS1034

808163

AS1041

808166

AS1039

808166

AS1041

808168

AS1040

808169

AS1040

808169

AS1042

808170

AS1044

808171

AS1040

808171

AS1042

808172

AS1033

808173

AS1032

808174

AS1041

808175

AS1040

808176

AS1032

808176

AS1034

808177

AS1031

Requires the use of a Gunite clevis kit.


Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.

AS1042
AS1033

808113

AS1041

808114

AS1031

808114

AS1033

808115

AS1040

808115

AS1042

808116

AS1032

808119

AS1032

808120

AS1032

808121

AS1036

808122

AS1036

808123

AS1036

808124

AS1031

808124

AS1033

808125

AS1032

808125

AS1034

808126

AS1041

808129

AS1039

808129

AS1041

808131

AS1040

808132

AS1040

808132

AS1042

808133

AS1044

808134

AS1040

808134

AS1042

808135

AS1033

808136

AS1032

808137

AS1041

808138

AS1040

808139

AS1032

808139

AS1034

808140

AS1031

Requires the use of a Gunite clevis kit.


Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.

Special Information

Dana Corporation (continued)

Requires the use of a Gunite clevis kit.

Dana Corporation
805812
808112

Gunite
Aftermarket
Part Number

Haldex ASA. 6.0 inch arm length only.


Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

22

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Dana Corporation (continued)


808177

AS1033

808178

AS1040

808178

AS1042

808179

AS1039

808179

AS1041

808180

AS1032

808180

AS1034

808184

AS1038

808254

AS1140

808254
808255
808255
808354

AS1142
AS1031
AS1131
AS1033

808375

AS1033

808382

AS1033

808679

AS1032

808679

AS1034

808684

AS1032

808685

AS1039

808685

AS1041

808687
808687
808688

AS1033
AS1133
AS1032

808688

AS1034

808689

AS1036

808690

AS1036

808691

AS1040

808691

AS1042

808692

AS1040

808692

AS1042

808693

AS1036

808694

AS1031

808694
808694

AS1131
AS1033

808694
808695

AS1133
AS1036

808746

AS1038

809490
809490
809609

AS1038
AS1138
AS1032

809610

AS1032

809611

AS1040

809612

AS1040

Haldex ASA. 6.0 inch arm length only.


Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
6.5 inch arm length only.

AS1032

809614

AS1039

809614
809614

AS1139
AS1041

809614
809615

AS1141
AS1031

809615
809615

AS1131
AS1033

809615
809616
809616
809617
809617
809754

AS1133
AS1033
AS1133
AS1033
AS1133
AS1036

809774

AS1036

809774
809775

AS1136
AS1036

809775
810047

AS1136
AS1040

810047

AS1042

810180

AS1032

810180

AS1034

810336
810336
810358

AS1040
AS1140
AS1038

810359

AS1038

810600

AS1040

810600

AS1042

810601

AS1039

810601

AS1041

810602

AS1040

810602

AS1042

810603

AS1039

810603

AS1041

810686

AS1043

810728

AS1032

810728

AS1034

Requires a Gunite straight style

810729
810729
810730
810730
810731

AS1036
AS1136
AS1038
AS1138
AS1040

Requires a Gunite straight style

810731

AS1042

Requires a Gunite straight style

810815

AS1032

Requires a Gunite straight style

810815

AS1034

Haldex ASA. Requires a Gunite straight style


clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Requires the use of a Gunite clevis kit.

Special Information

Dana Corporation (continued)


809613

Requires the use of a Gunite clevis kit.

Haldex ASA.
clevis kit.
Haldex ASA.
clevis kit.
Haldex ASA.
clevis kit.
Haldex ASA.
clevis kit.

Gunite
Aftermarket
Part Number

Haldex ASA. Requires a Gunite straight style


clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

23

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Dana Corporation (continued)


810838

AS1031

810838

AS1033

810843

AS1040

810843

AS1042

811120

AS1040

811120
811120
811120
811121

AS1140
AS1042
AS1142
AS1040

811121

AS1042

811336

AS1040

812351

AS1040

812351

AS1042

812642
812642
812643
812643
812926

AS1036
AS1136
AS1036
AS1136
AS1038

812927

AS1038

813246
813246
813247
813247
813638

AS1032
AS1132
AS1032
AS1132
AS1040

813639

AS1041

813640

AS1043

813641

AS1044

813642

AS1032

813643

AS1033

813648

AS1040

813649

AS1041

813650

AS1043

813651

AS1044

813652

AS1032

813653

AS1033

813654

AS1178

815787

AS1039

815787
815787

AS1139
AS1041

815787
815788

AS1141
AS1040

815788
815788
815788
815789

AS1140
AS1042
AS1142
AS1031

815789

AS1131

Haldex ASA. 5.0 inch arm length only.


Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.

Gunite
Aftermarket
Part Number

Dana Corporation (continued)


815789

AS1033

815789
815790

AS1133
AS1032

815790
815790
815790
815792
815792
815793

AS1132
AS1034
AS1134
AS1041
AS1141
AS1040

815793
815793
815793
815794
815794
815795
815795
815796
815796
815797
815797
815798
815798
815799
815799
815800
815800
815801
815801
815802
815802
815806

AS1140
AS1042
AS1142
AS1033
AS1133
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1032
AS1132
AS1040
AS1140
AS1039

815806

AS1041

815807

AS1040

815807

AS1042

815808

AS1031

815808

AS1033

815809

AS1032

815809

AS1034

815811

AS1041

815812

AS1040

815812

AS1042

815813

AS1033

815814

AS1036

815815

AS1036

815816

AS1036

815817

AS1038

6.5 inch arm length only.

815818

AS1038

6.5 inch arm length only.

815819

AS1038

815820

AS1032

6.5 inch arm length only.


6.5 inch arm length only.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Haldex ASA. Requires a Gunite .625" offset
style clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires the use of Gunite
AS3022 clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.

5.0 inch arm length only. Requires the use of


a Gunite clevis kit.
5.0 inch arm length only.

Special Information

6.0 inch arm length only. Requires the use of


a Gunite clevis kit.
6.0 inch arm length only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of a Gunite clevis kit.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.0 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. 5.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. 6.5 inch arm length only.
Requires a Gunite straight style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. Requires a Gunite .625 offset
style clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

24

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Dana Corporation (continued)


815821

AS1040

815829

AS1041

Haldex ASA. Requires a Gunite straight style


clevis kit.
Haldex ASA. Requires a Gunite straight style
clevis kit.

Gunite
Aftermarket
Part Number

Euclid (continued)
E-135K

AS1032

E-135K

AS1034

E-146K

AS1039

E-146K

AS1041

E-149K

AS1039

E-149K

AS1041

E-150K

AS1040

E-167K

AS1039

E-167K

AS1041

E-167K1

AS1039

E-167K1

AS1041

E-168K

AS1040

E-168K

AS1042

E-168K1

AS1040

E-168K1

AS1042

E-211K

AS1031

E-211K
E-211K

AS1131
AS1033

E-211K
E-215K

AS1133
AS1040

E-215K

AS1042

E-218K

AS1044

E-229K

AS1040

E-229K

AS1042

E-230K

AS1031

E-230K

AS1033

E-231K

AS1031

E-231K

AS1033

E-232K

AS1032

Euclid
E-051K

AS1031

E-051K

AS1033

E-070K

AS1041

E-086K

AS1031

E-086K
E-086K

AS1131
AS1033

E-086K
E-091K

AS1133
AS1040

E-091K
E-091K
E-091K
E-099K

AS1140
AS1042
AS1142
AS1044

E-108K

AS1032

E-108K

AS1034

E-108K1

AS1032

E-108K1

AS1034

E-111K

AS1031

E-111K
E-111K

AS1131
AS1033

E-111K
E-112K

AS1133
AS1032

E-112K1

AS1032

E-113K

AS1032

E-113K1

AS1032

E-114K

AS1036

E-114K1

AS1036

E-115K

AS1036

E-115K1

AS1036

E-128K

AS1036

E-128K1

AS1036

E-129K

AS1031

E-129K
E-129K

AS1131
AS1033

E-129K
E-130K

AS1133
AS1031

E-130K

AS1033

Haldex ASA. For 5.00" arm length only.


Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
Haldex ASA. 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
.625" offset style clevis kit.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.

Special Information

Haldex ASA. For 5.50" arm length only.


Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
Haldex ASA. 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Haldex ASA. 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. Requires the use of a Gunite
straight style clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

25

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Euclid (continued)
E-232K

AS1034

E-233K

AS1032

E-233K

AS1034

E-234K

AS1039

E-234K

AS1041

E-235K

AS1039

E-235K

AS1041

E-236K

AS1040

E-236K

AS1042

E-237K

AS1040

E-237K

AS1042

E-238K

AS1032

E-238K

AS1034

E-239K

AS1031

E-239K

AS1033

E-240K

AS1040

E-240K

AS1042

E-241K

AS1039

E-241K

AS1041

E-247K

AS1031

E-247K

AS1033

E-294K

AS1032

E-294K
E-294K
E-294K
E-318K

AS1132
AS1034
AS1134
AS1031

E-318K
E-318K

AS1131
AS1033

E-318K
E-319K
E-319K
E-325K
E-325K

AS1133
AS1038
AS1138
AS1036
AS1136

Gunite
Aftermarket
Part Number

Euclid (continued)

Haldex ASA. For 6.50" arm length only.


Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.50" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 5.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
Haldex ASA. For 6.00" arm length only.
Requires the use of a Gunite straight style
clevis kit.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.

E-10779A

AS1040

E-10779A
E-10780A

AS1140
AS1032

E-10780A
E-10781A

AS1132
AS1041

E-10781A
E-10782A

AS1141
AS1033

E-10782A
E-10783A

AS1133
AS1044

E-10783A
E-10784A

AS1144
AS1036

E-10784A
E-10785A

AS1136
AS1040

E-10785A
E-10786A

AS1140
AS1032

E-10786A
E-10787A

AS1132
AS1044

E-10787A
E-10788A

AS1144
AS1041

E-10788A
E-10789A

AS1141
AS1033

E-10789A
E-10892

AS1133
AS1032

E-10892
E-10893

AS1132
AS1040

E-10893
E-11395

AS1140
AS1036

E-11395
E-11396

AS1136
AS1038

E-11396
E-11398

AS1138
AS1032

E-11398
E-11399

AS1132
AS1033

E-11399
E-11400

AS1133
AS1040

E-11400
E-11401

AS1140
AS1040

E-11401
E-11402

AS1140
AS1041

6.5 inch arm length only.

E-11402
E-11403

AS1141
AS1042

E-11403
E-11404

AS1142
AS1040

E-11404
E-11405

AS1140
AS1043

E-11405
E-11406

AS1143
AS1044

E-11406

AS1144

6.5 inch arm length only.


5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.

Special Information

Crewson Industries ASA. Requires the use of


either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Requires the use of either AS3000 or AS3001
clevis kits.
Requires the use of either AS3000 or AS3001
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

26

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Euclid (continued)
E-11407

AS1038

E-11407
E-11408

AS1138
AS1038

E-11408
E-11409

AS1138
AS1032

E-11409
E-11410

AS1132
AS1032

E-11410
E-11411

AS1132
AS1032

E-11411
E-11412

AS1132
AS1032

E-11412
E-11415

AS1132
AS1040

E-11415
E-11416

AS1140
AS1040

E-11416
E-11417

AS1140
AS1040

E-11417
E-11418

AS1140
AS1040

E-11418
E-11419
E-11419
E-11420

AS1140
R802462
R802462
AS1040

E-11420
E-11421

AS1140
AS1041

E-11421
E-11422

AS1141
AS1041

E-11422
E-11423

AS1141
AS1041

E-11423
E-11424

AS1141
AS1041

E-11424
E-11425

AS1141
AS1032

E-11425
E-11426

AS1032
AS1032

E-11426
E-11873

AS1132
AS1042

E-11875

AS1045

E-11877

AS1038

E-11877
E-11879

AS1138
AS1038

E-11879
E-11880

AS1138
AS1036

E-11880
E-11902

AS1136
AS1042

E-11902
E-6900

AS1142
AS1036

E-6900

AS1136

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
AS1040
AS1140
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Gunite
Aftermarket
Part Number

Euclid (continued)
E-6900A

AS1036

E-6900A
E-6901

AS1136
AS1036

E-6901
E-6902

AS1136
AS1038

E-6902
E-6902A

AS1138
AS1038

E-6902A
E-6903

AS1138
AS1032

E-6903
E-6903A

AS1132
AS1032

E-6903A
E-6904

AS1132
AS1039

E-6904
E-6904

AS1139
AS1041

E-6904
E-6905

AS1141
AS1040

E-6905
E-6905A

AS1140
AS1040

E-6905A
E-6906

AS1140
AS1036

E-6906A

AS1036

E-6907

AS1036

E-6907A

AS1036

E-6908

AS1032

E-6908
E-6909

AS1132
AS1032

E-6909
E-6914

AS1132
AS1033

E-6914A

AS1033

E-6915

AS1032

E-6915

AS1132

E-6918

AS1041

E-6918
E-6918A

AS1141
AS1041

E-6918A
E-6919

AS1141
AS1040

E-6919
E-6919

AS1140
AS1042

E-6919
E-6919A

AS1142
AS1040

E-6919A
E-6919A

AS1140
AS1042

Requires the use of either AS3000 or AS3016


clevis kits.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA. Requires the use of
either AS3001 or AS3017 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3001 or AS3017 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3001 or AS3017 clevis kits.
Crewson Industries ASA.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3001
clevis kits.

Special Information

Haldex ASA. Requires the use of either


AS3000 or AS3001 clevis kits.
Haldex ASA.
Requires the use of either AS3000 or AS3001
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Requires the use of either AS3000 or AS3016
clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Requires the use of either AS3000 or AS3016
clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Requires the use of either AS3002 or AS3003
clevis kits.
Haldex ASA. Requires the use of either
AS3002 or AS3003 clevis kits.
Requires the use of either AS3002 or AS3003
clevis kits.
Haldex ASA. Requires the use of either
AS3002 or AS3003 clevis kits.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

27

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Euclid (continued)
E-6919A
E-6920

AS1142
AS1040

E-6920

AS1042

E-6923

AS1031

E-6923

AS1033

E-6923A

AS1031

E-6923A

AS1033

E-6923B

AS1031

E-6923B

AS1033

E-6924

AS1032

E-6924

AS1034

E-6924A

AS1032

E-6924A

AS1034

E-6924B

AS1032

E-6924B

AS1034

E-6925

AS1039

E-6925

AS1041

E-6925A

AS1039

E-6925A

AS1041

E-6925B

AS1039

E-6925B

AS1041

E-6926
E-6926
E-6927

AS1040
AS1140
AS1040

E-6927

AS1042

E-6927A

AS1040

E-6927A

AS1042

E-6927B

AS1040

E-6927B

AS1042

Haldex ASA. For 6.50" arm lengths only.


Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.00" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Requires the use of a Gunite clevis kit.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 5.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.
Haldex ASA. For 6.50" arm lengths only.
Requires the use of either AS3000 or AS3001
clevis kits.

Gunite
Aftermarket
Part Number

Special Information

Euclid (continued)
E-6932
E-6936

AS1178
AS1033

E-6936
E-6937
E-6937
E-6938

AS1133
AS1033
AS1133
AS1031

E-6938
E-6938

AS1131
AS1033

E-6938
E-6939

AS1133
AS1033

E-6939
E-6940

AS1133
AS1032

E-6940
E-6941

AS1132
AS1032

E-6941
E-6942

AS1132
AS1041

E-6943

AS1041

E-6944

AS1040

E-6944
E-6945
E-6945
E-6946

AS1140
AS1040
AS1140
AS1044

E-6947

AS1043

E-6948
E-6948
E-6949
E-6949
E-6981

AS1044
AS1144
AS1031
AS1131
AS1038

E-6982

AS1038

E-6987
E-6987
E-6987A

AS1036
AS1136
AS1036

E-6987A
E-6988
E-6988

AS1136
AS1036
AS1036

E-6988A

AS1036

E-6989
E-6989A

AS1038
AS1038

E-6989A
E-6990
E-6990
E-6990A

AS1138
AS1038
AS1138
AS1038

E-6990A
E-6991

AS1138
AS1031

E-6991
E-6991

AS1131
AS1033

E-6991
E-6991A

AS1133
AS1031

Requires the use of Gunite AS3022 clevis kit.


Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Requires the use of a Gunite clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Haldex ASA. Requires the use of either
AS3000 or AS3001 clevis kits.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Haldex ASA. Requires the use of either
AS3002 or AS3003 clevis kits.
Haldex ASA. Requires the use of either
AS3002 or AS3003 clevis kits.
Requires the use of a Gunite clevis kit.
Crewson Industries ASA. Requires the use of
AS3001 or AS3016 clevis kit.
Crewson Industries ASA.
Requires the use of a Gunite clevis kit.
Requires the use of a Gunite clevis kit.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
Requires the use of a Gunite clevis kit.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
Requires the use of a Gunite clevis kit.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

28

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Euclid (continued)
E-6991A

AS1131

E-6991A

AS1033

E-6991A

AS1133

E-6992

AS1032

E-6992
E-6992
E-6992
E-6992A

AS1132
AS1034
AS1134
AS1032

E-6992A

AS1132

E-6992A

AS1034

E-6992A

AS1134

E-6993

AS1039

E-6993
E-6993

AS1139
AS1041

E-6993
E-6993A

AS1141
AS1039

E-6993A

AS1139

E-6993A

AS1041

E-6993A

AS1141

E-6994

AS1040

E-6994
E-6994
E-6994
E-6994A

AS1140
AS1042
AS1142
AS1040

E-6994A

AS1140

E-6994A

AS1042

E-6994A

AS1142

E-6995

AS1044

E-6995
E-6995A

AS1144
AS1044

E-6995A

AS1144

E-6996

AS1043

E-6996
E-6996
E-6996
E-6996A

AS1143
AS1045
AS1145
AS1043

E-6996A

AS1143

E-6996A

AS1045

E-6996A

AS1145

Crewson Industries ASA. 5.0 inch arm length


only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
5.0 inch arm length only. Requires the use of
a Gunite clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
6.0 inch arm length only. Requires the use of
a Gunite clevis kit.
6.0 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
5.5 inch arm length only. Requires the use of
a Gunite clevis kit.
5.5 inch arm length only.
6.5 inch arm length only.
6.5 inch arm length only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems


400-10001
400-10002
400-10003
400-10004
400-10005
400-10006
400-10007
400-10008
400-10011

AS1036
AS1036
AS1036
AS1038
AS1032
AS1032
AS1032
AS1040
AS1040

400-10011

AS1042

400-10012

AS1032

400-10012

AS1034

400-10040
400-10041
400-10067

AS1038
AS1038
AS1039

400-10067

AS1041

400-10070
400-10071
400-10072
400-10073
400-10100

AS1040
AS1032
AS1036
AS1038
AS1039

400-10100

AS1041

400-10101

AS1040

400-10101

AS1042

400-10102

AS1031

400-10102

AS1033

400-10103

AS1032

400-10103

AS1034

400-10104
400-10105
400-10106

AS1041
AS1033
AS1040

400-10106

AS1042

400-10140

AS1039

400-10140

AS1041

400-10141
400-10142

AS1040
AS1031

400-10142

AS1033

400-10143

AS1032

400-10143

AS1034

400-10144
400-10145
400-10146

AS1041
AS1033
AS1040

400-10146

AS1042

400-10155
400-10156
400-10200
400-10201
400-10202

AS1032
AS1040
AS1041
AS1040
AS1033

Requires a Gunite straight style clevis kit.


Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

29

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems (continued)


400-10203
400-10204
400-10205
400-10206
400-10207

AS1032
AS1044
AS1043
AS1033
AS1031

400-10207

AS1033

400-10211
400-10212
400-10213
400-10214
400-10215
400-10216
400-10304
400-20211
400-20212
400-20213
400-20214
400-20215
400-20216
409-10011
409-10051

AS1040
AS1041
AS1043
AS1044
AS1032
AS1033
AS1178
AS1040
AS1041
AS1043
AS1044
AS1032
AS1033
AS1033
AS1031

409-10051

AS1033

409-10070
409-10071
409-10085
409-10086

AS1041
AS1033
AS1032
AS1031

409-10086

AS1033

409-10091

AS1040

409-10091

AS1042

409-10093

AS1039

409-10093

AS1041

409-10094

AS1040

409-10094

AS1042

409-10099
409-10101

AS1044
AS1032

409-10101

AS1034

409-10102

AS1031

409-10102

AS1033

409-10108

AS1032

409-10108

AS1034

409-10112
409-10113
409-10114
409-10115
409-10120
409-10121
409-10124
409-10125

AS1032
AS1032
AS1036
AS1036
AS1036
AS1036
AS1033
AS1039

409-10125

AS1041

409-10126

AS1040

Requires a Gunite straight style clevis kit.

Gunite
Aftermarket
Part Number

Haldex Brake Systems (continued)


409-10126

AS1042

Requires a Gunite straight style clevis kit.

409-10128

AS1036

Requires a Gunite straight style clevis kit.

409-10130

AS1031

409-10130

AS1033

409-10134

AS1032

409-10134

AS1034

409-10135

AS1032

409-10135

AS1034

409-10146

AS1039

409-10146

AS1041

409-10149

AS1039

409-10149

AS1041

409-10150
409-10167

AS1040
AS1039

409-10167

AS1041

409-10168

AS1040

409-10168

AS1042

409-10172
409-10174
409-10178

AS1036
AS1040
AS1039

409-10178

AS1041

409-10197

AS1040

409-10197

AS1042

409-10215

AS1040

409-10215

AS1042

409-10218
409-10221

AS1044
AS1031

409-10221

AS1033

409-10222

AS1040

409-10222

AS1042

409-10223
409-10224
409-10225

AS1032
AS1036
AS1039

409-10225

AS1041

409-10226

AS1031

409-10226

AS1033

Requires a Gunite .625 offset style clevis kit.

409-10228

AS1040

Requires a Gunite .625 offset style clevis kit.

409-10228

AS1042

Requires a Gunite .625 offset style clevis kit.

409-10229

AS1040

Requires a Gunite straight style clevis kit.

409-10229

AS1042

409-10230

AS1031

409-10230

AS1033

Requires a Gunite straight style clevis kit.

5.0 inch arm length only. Requires a Gunite


straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires the use of Gunite AS3022 clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.50 inch arm length only. Requires a Gunite
straight style clevis kit.
6.50 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite .625 offset style clevis kit.
Requires a Gunite .625 offset style clevis kit.

Requires a Gunite .625 offset style clevis kit.

5.0 inch arm length only. Requires a Gunite


straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.

Special Information

6.5 inch arm length only. Requires a Gunite


straight style clevis kit.
5.50 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.50 inch arm length only. Requires a Gunite
straight style clevis kit.
6.50 inch arm length only. Requires a Gunite
straight style clevis kit.
5.50 inch arm length only. Requires a Gunite
straight style clevis kit.
6.50 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.50 inch arm length only. Requires a Gunite
straight style clevis kit.
6.50 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.

Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

30

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems (continued)


409-10231

AS1031

409-10231

AS1033

409-10232

AS1032

409-10232

AS1034

409-10233

AS1032

409-10233

AS1034

409-10234

AS1038

409-10234

AS1041

409-10235

AS1038

409-10235

AS1041

409-10236

AS1040

409-10236

AS1042

409-10237

AS1040

409-10237

AS1042

409-10238

AS1032

409-10238

AS1034

409-10239

AS1031

409-10239

AS1033

409-10240

AS1040

409-10240

AS1042

409-10241

AS1039

409-10241

AS1041

409-10247

AS1031

409-10247

AS1033

409-10249
409-10250
409-10257
409-10258
409-10263
409-10264
409-10282
409-10287
409-10288
409-10293

AS1036
AS1036
AS1032
AS1040
AS1032
AS1032
AS1178
AS1033
AS1041
AS1032

409-10293

AS1034

409-10294

AS1032

409-10294

AS1034

409-10312

AS1040

409-10312

AS1042

409-10313

AS1032

409-10313

AS1034

409-10314

AS1039

409-10314

AS1041

5.0 inch arm length only. Requires a Gunite


straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires the use of Gunite AS3022 clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.

Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems (continued)


409-10315

AS1031

409-10315

AS1033

409-10317

AS1031

409-10317

AS1033

409-10319
409-10325
409-10326
409-10334
409-10335
409-10343

AS1038
AS1036
AS1036
AS1038
AS1038
AS1039

409-10343

AS1041

409-10351
409-10352
409-10360

AS1043
AS1041
AS1039

409-10360

AS1041

409-10361
409-10362
409-10363
409-10364
409-10365
409-10370
409-10384
409-10385
409-10386
409-10390
409-10391
409-10392
409-10393
409-10394
409-10395
409-10396
409-10397
409-10398
409-10399
409-10404
409-10405

AS1038
AS1040
AS1178
AS1038
AS1033
AS1032
AS1040
AS1038
AS1040
AS1040
AS1036
AS1033
AS1033
AS1032
AS1032
AS1041
AS1041
AS1040
AS1040
AS1041
AS1039

409-10405

AS1041

409-10406
409-10407
409-10408

AS1040
AS1040
AS1040

409-10408

AS1042

409-10410

AS1031

409-10410

AS1033

409-10412

AS1032

409-10412

AS1034

409-10416

AS1040

409-10416

AS1042

409-10417

AS1032

409-10417

AS1034

409-10426

AS1039

5.0 inch arm length only. Requires a Gunite


straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires the use of Gunite AS3022 clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.

Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

31

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems (continued)


409-10426

AS1041

409-10429
409-10430
409-10432
409-10443
409-10444

AS1040
AS1040
AS1043
AS1041
AS1040

409-10444

AS1042

409-10455
409-10457

AS1033
AS1039

409-10457

AS1041

409-10458

AS1031

409-10458

AS1033

409-10465
409-10466
409-10471
409-10472
409-10473
409-10474
409-10475
409-10476
409-10490
409-10495
409-10496
409-10497
409-10498
409-10499
409-10502
409-10504
409-10505
409-10506

AS1038
AS1040
AS1040
AS1041
AS1043
AS1044
AS1032
AS1033
AS1178
AS1036
AS1038
AS1036
AS1036
AS1032
AS1040
AS1033
AS1033
AS1040

409-10506

AS1042

409-10509

AS1032

409-10509

AS1034

409-10512
409-10529
409-10530

AS1040
AS1041
AS1040

409-10530

AS1042

409-10531

AS1039

409-10531

AS1041

409-10532

AS1040

409-10532

AS1042

409-10533

AS1031

409-10533

AS1033

409-10535
409-10536
409-10548

AS1038
AS1038
AS1032

409-10548

AS1034

409-10551

AS1040

409-10551

AS1042

6.0 inch arm length only. Requires a Gunite


straight style clevis kit.
Requires a Gunite straight style clevis kit.

Gunite
Aftermarket
Part Number

Haldex Brake Systems (continued)


409-10552

AS1039

409-10552

AS1041

Requires a Gunite straight style clevis kit.

409-10553

AS1040

Requires a Gunite straight style clevis kit.

409-10553

AS1042

409-10561

AS1039

409-10561

AS1041

409-10564

AS1031

409-10564

AS1033

409-10565

AS1032

409-10565

AS1034

409-10566

AS1039

409-10566

AS1041

409-10579
409-10580

AS1041
AS1040

409-10580

AS1042

409-10581
409-10605
409-10615

AS1033
AS1040
AS1039

409-10615

AS1041

409-10626

AS1031

Requires a Gunite straight style clevis kit.

409-10626

AS1033

Requires a Gunite straight style clevis kit.

Requires a Gunite straight style clevis kit.

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires the use of Gunite AS3022 clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625 offset style clevis kit.
Requires a Gunite .625 offset style clevis kit.

409-10627

AS1032

Requires a Gunite straight style clevis kit.

409-10627

AS1034

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.

409-10628
409-10635
409-10637
409-10648
409-10649

AS1040
AS1032
AS1040
AS1040
AS1032

409-10649

AS1034

Requires a Gunite straight style clevis kit.

Requires a Gunite

409-10650
409-10653
409-10654
409-10658
409-10659
409-10660
409-10661
409-10662
409-10663
409-10664
409-10665
409-10670
409-10673
409-10674
409-10675
409-10678
409-10679

AS1040
AS1040
AS1178
AS1036
AS1038
AS1036
AS1036
AS1032
AS1040
AS1038
AS1038
AS1040
AS1041
AS1044
AS1033
AS1041
AS1040

Requires a Gunite

409-10679

AS1042

Requires a Gunite

409-10680

AS1033

Requires a Gunite straight style clevis kit.

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.
5.5 inch arm length only.
straight style clevis kit.
6.5 inch arm length only.
straight style clevis kit.

Requires a Gunite

Special Information

5.0 inch arm length only. Requires a Gunite


straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires the use of Gunite AS3022 clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite .625" offset style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

32

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems (continued)


409-10682

AS1040

409-10682

AS1042

409-10683
409-10684
409-10685
409-10731

AS1040
AS1043
AS1032
AS1031

409-10731

AS1033

409-10732

AS1039

409-10732

AS1041

409-10733

AS1032

409-10733

AS1034

409-10741

AS1031

409-10741

AS1033

409-10742

AS1039

409-10742

AS1041

409-10759
409-10760
409-10761
409-10762
409-10774
409-10775
409-10787
409-10797

AS1040
AS1032
AS1036
AS1038
AS1032
AS1032
AS1032
AS1032

409-10797

AS1034

409-10813

AS1032

409-10813

AS1034

409-10814
409-10815

AS1040
AS1031

409-10815

AS1033

409-10816

AS1039

409-10816

AS1041

409-10843

AS1031

409-10843

AS1033

409-10858

AS1039

409-10858

AS1041

409-10859

AS1031

409-10859

AS1033

409-10860

AS1032

409-10860

AS1034

409-10861
409-10862

AS1040
AS1031

409-10862

AS1033

409-10868

AS1039

409-10868

AS1041

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.

Gunite
Aftermarket
Part Number

Haldex Brake Systems (continued)


409-10869

AS1032

409-10869

AS1034

409-10870
409-10871

AS1040
AS1032

409-10871

AS1034

409-10872
409-10890
409-10893
409-10894
409-10895
409-10896

AS1040
AS1040
AS1040
AS1040
AS1040
AS1039

409-10896

AS1041

409-10909

AS1032

409-10909

AS1034

409-10910

AS1031

409-10910

AS1033

409-10946

AS1039

Requires a Gunite straight style clevis kit.

409-10946

AS1041

Requires a Gunite straight style clevis kit.

409-10947

AS1039

Requires a Gunite .625" offset style clevis kit.

409-10947

AS1041

Requires a Gunite straight style clevis kit.

409-10948

AS1031

409-10948

AS1033

409-10949
409-10979
409-10980
409-10983

AS1040
AS1040
AS1041
AS1039

409-10983

AS1041

409-10984

AS1039

409-10984

AS1041

409-20000
409-20002
409-20004
409-20006
409-20024
409-20025
409-10224
429-10228
429-10238

AS1032
AS1040
AS1033
AS1041
AS1043
AS1044
AS1036
AS1040
AS1032

429-10238

AS1034

429-10257
429-10370
CS52315

AS1032
AS1032
AS1031

CS52315

AS1131

CS52315

AS1033

CS52315

AS1133

Requires a Gunite straight style clevis kit.


Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.

Requires a Gunite .625" offset style clevis kit.

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.
5.0 inch arm length only.
straight style clevis kit.
6.0 inch arm length only.
straight style clevis kit.

Requires a Gunite
Requires a Gunite
Requires a Gunite
Requires a Gunite

Special Information

5.5 inch arm length only. Requires a Gunite


straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
5.0 inch arm length only. Requires a Gunite
straight style clevis kit.
6.0 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
5.5 inch arm length only. Requires a Gunite
straight style clevis kit.
6.5 inch arm length only. Requires a Gunite
straight style clevis kit.
Requires a Gunite straight style clevis kit.
Requires a Gunite straight style clevis kit.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

33

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems (continued)


CS52316

AS1032

CS52316

AS1132

CS52316

AS1034

CS52316

AS1134

CS52320

AS1040

CS52320

AS1140

CS52320

AS1042

CS52320

AS1142

CS52321

AS1039

CS52321

AS1139

CS52321

AS1041

CS52321

AS1141

CS52330

AS1036

CS52330

AS1136

CS52331

AS1036

CS52332

AS1035

CS52332

AS1135

CS52335

AS1038

CS52335

AS1138

CS52337

AS1037

CS52337

AS1137

CS52340

AS1178

Crewson Industries ASA. Requires the use of


either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
a clevis with a 1.3 pin center distance. For
5.5 inch arm length only.

Meritor
A-3275-X-596

AS1039

A-3275-X-596
A-3275-X-596

AS1139
AS1041

A-3275-X-596
A1-3275A1119
A1-3275A1119
A1-3275A599S
A1-3275A599S
A1-3275B600S
A1-3275B600S
A1-3275C601S
A1-3275C601S
A1-3275K1051S
A1-3275K1051S
A1-3275L792S
A1-3275L792S
A1-3275N716S

AS1141
AS1042
AS1142
AS1032
AS1132
AS1033
AS1133
AS1034
AS1134
AS1031
AS1131
AS1033
AS1133
AS1033

5.0 inch arm length only. Requires a Gunite


clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
A1-3275N716S
A1-3275N768S
A1-3275N768S
A1-3275P718S
A1-3275P718S
A1-3275Q1083S
A1-3275Q1083S
A1-3275R1084S
A1-3275R1084S
A1-3275S1085
A1-3275S1085
A1-3275T1086
A1-3275T1086
A1-3275T592S
A1-3275T592S
A1-3275U593S
A1-3275U593S
A1-3275V1139S
A1-3275V1139S
A1-3275V594S
A1-3275V594S
A1-3275W1089S
A1-3275W1089S
A1-3275W595S
A1-3275W595S
A1-3275X1090S
A1-3275X1090S
A1-3275Y1091S
A1-3275Y1091S
A1-3275Z1092S
A1-3275Z1092S
A1-3275Z1118S
A1-3275Z1118S
A1-3275Z598S
A1-3275Z598S
A2-3275A1119S
A2-3275A1119S
A2-3275A599S
A2-3275A599S
A2-3275B600S
A2-3275B600S
A2-3275C601S
A2-3275C601S
A2-3275K1051S
A2-3275K1051S
A2-3275L792S
A2-3275L792S
A2-3275N1079
A2-3275N1079
A2-3275N716S
A2-3275N716S
A2-3275N768S
A2-3275N768S
A2-3275P718S
A2-3275P718S
A2-3275Q1083
A2-3275Q1083
A2-3275R1084
A2-3275R1084
A2-3275T592S

AS1133
AS1032
AS1132
AS1034
AS1134
AS1040
AS1140
AS1040
AS1140
AS1039
AS1139
AS1039
AS1139
AS1031
AS1131
AS1032
AS1132
AS1032
AS1132
AS1033
AS1133
AS1040
AS1140
AS1034
AS1134
AS1040
AS1140
AS1033
AS1133
AS1033
AS1133
AS1042
AS1142
AS1031
AS1131
AS1042
AS1142
AS1040
AS1140
AS1041
AS1141
AS1042
AS1142
AS1039
AS1139
AS1041
AS1141
AS1038
AS1138
AS1041
AS1141
AS1040
AS1140
AS1042
AS1142
AS1032
AS1132
AS1032
AS1132
AS1039

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

34

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
A2-3275T592S
A2-3275U1087S
A2-3275U1087S
A2-3275U1139S
A2-3275U1139S
A2-3275U593S
A2-3275U593S
A2-3275V1088S
A2-3275V1088S
A2-3275V594S
A2-3275V594S
A2-3275W1089S
A2-3275W1089S
A2-3275W595S
A2-3275W595S
A2-3275W59S
A2-3275W59S
A2-3275X1090S
A2-3275X1090S
A2-3275Y1091S
A2-3275Y1091S
A2-3275Z1092S
A2-3275Z1092S
A2-3275Z598S
A2-3275Z598S
A2-3276A599S
A2-3276A599S
A3-3275B1042S
A3-3275B1042S
A3-3275N716S
A3-3275N716S
A3-3275P718S
A3-3275P718S
A3-3275W1089S
A3-3275W1089S
A3-3275X1090S
A3-3275X1090S
A4-3275B1042S
A4-3275B1042S
A4-3275N716S
A4-3275N716S
A4-3275N768S
A4-3275N768S
A4-3275P718S
A4-3275P718S
A4-3275W1089S
A4-3275W1089S
A4-3275X1090S
A4-3275X1090S
A4-3780A27
A4-3780A27
A4-3780B28
A4-3780B28
A4-3780C29
A4-3780C29
A4-3780H8
A4-3780H8
A4-3780K11
A4-3780K11
A4-3780M13

AS1139
AS1039
AS1139
AS1040
AS1140
AS1040
AS1140
AS1039
AS1139
AS1041
AS1141
AS1040
AS1140
AS1042
AS1142
AS1042
AS1142
AS1040
AS1140
AS1041
AS1141
AS1041
AS1141
AS1039
AS1139
AS1040
AS1140
AS1039
AS1139
AS1044
AS1144
AS1034
AS1134
AS1032
AS1132
AS1032
AS1132
AS1031
AS1131
AS1033
AS1133
AS1036
AS1136
AS1042
AS1142
AS1032
AS1132
AS1032
AS1132
AS1036
AS1136
AS1032
AS1132
AS1032
AS1132
AS1036
AS1136
AS1032
AS1132
AS1032

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
A4-3780M13
A4-3780Z26
A4-3780Z26
A5-3275-A-599S
A5-3275-A-599S
A5-3275-B-600S
A5-3275-B-600S
A5-3275-C-601S
A5-3275-C-601S
A5-3275-N-716S
A5-3275-N-716S
A5-3275-N-768S
A5-3275-N-768S
A5-3275-U-593S
A5-3275-U-593S
A5-3275-V-594S
A5-3275-V-594S
A5-3275-W-595S
A5-3275-W-595S
A6-3275-A-599S
A6-3275-A-599S
A6-3275-N-768S
A6-3275-N-768S
A6-3275-T-592S
A6-3275-T-592S
A6-3275-Z-598S
A6-3275-Z-598S
A7-3275-A-599S
A7-3275-A-599S
A7-3275-N-768S
A7-3275-N-768S
A7-3275-T-592S
A7-3275-T-592S
A7-3275-U-593S
A7-3275-U-593S
A7-3275-Z-592S
A7-3275-Z-592S
A7-3275-Z-598S
A7-3275-Z-598S
A8-3275-A-599S
A8-3275-A-599S
A8-3275-N-716S
A8-3275-N-716S
A8-3275-N-768S
A8-3275-N-768S
A8-3275-T-592S
A8-3275-T-592S
A8-3275-U-593S
A8-3275-U-593S
A8-3275-Z-598S
A8-3275-Z-598S
A9-3275-A-599S
A9-3275-A-599S
A9-3275-N-716S
A9-3275-N-716S
A9-3275-T-592S
A9-3275-T-592S
A9-3275-U-593S
A9-3275-U-593S
A9-3275-Z-598S

AS1132
AS1036
AS1136
AS1043
AS1143
AS1044
AS1144
AS1045
AS1145
AS1041
AS1141
AS1040
AS1140
AS1043
AS1143
AS1044
AS1144
AS1045
AS1145
AS1032
AS1132
AS1040
AS1140
AS1035
AS1135
AS1035
AS1135
AS1036
AS1136
AS1032
AS1132
AS1035
AS1135
AS1032
AS1132
AS1035
AS1135
AS1036
AS1136
AS1036
AS1136
AS1033
AS1133
AS1040
AS1140
AS1031
AS1131
AS1036
AS1136
AS1031
AS1131
AS1037
AS1137
AS1033
AS1133
AS1031
AS1131
AS1036
AS1136
AS1031

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

35

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
A9-3275-Z-598S
A10-3275A599S
A10-3275A599S
A10-3275E1045S
A10-3275E1045S
A10-3275F1046S
A10-3275F1046S
A10-3275N716S
A10-3275N716S
A10-3275T592S
A10-3275T592S
A10-3275U593S
A10-3275U593S
A10-3275Z598S
A10-3275Z598S
A11-3275A599S
A11-3275A599S
A11-3275C601S
A11-3275C601S
A11-3275N716S
A11-3275N716S
A11-3275N768S
A11-3275N768S
A11-3275U593S
A11-3275U593S
A11-3275W595S
A11-3275W595S
A12-3275A599S
A12-3275A599S
A12-3275C601S
A12-3275C601S
A12-3275N716S
A12-3275N716S
A12-3275N768S
A12-3275N768S
A12-3275T592S
A12-3275T592S
A12-3275U593S
A12-3275U593S
A12-3275W595S
A12-3275W595S
A12-3275Z598S
A12-3275Z598S
A13-3275A599S
A13-3275A599S
A13-3275C601S
A13-3275C601S
A13-3275N716S
A13-3275N716S
A13-3275N768S
A13-3275N768S
A13-3275U593S
A13-3275U593S
A13-3275W595S
A13-3275W595S
A14-3275A599S
A14-3275A599S
A14-3275B600S
A14-3275B600S
A14-3275C601S

AS1131
AS1032
AS1132
AS1036
AS1136
AS1036
AS1136
AS1041
AS1141
AS1039
AS1139
AS1032
AS1132
AS1039
AS1139
AS1036
AS1136
AS1034
AS1134
AS1041
AS1141
AS1036
AS1136
AS1032
AS1132
AS1034
AS1134
AS1036
AS1136
AS1042
AS1142
AS1044
AS1144
AS1036
AS1136
AS1039
AS1139
AS1036
AS1136
AS1042
AS1142
AS1039
AS1139
AS1036
AS1136
AS1045
AS1145
AS1033
AS1133
AS1040
AS1140
AS1036
AS1136
AS1045
AS1145
AS1036
AS1136
AS1033
AS1133
AS1034

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
A14-3275C601S
A14-3275N716S
A14-3275N716S
A14-3275U593S
A14-3275U593S
A14-3275V594S
A14-3275V594S
A14-3275W595S
A14-3275W595S
A15-3275A599S
A15-3275A599S
A15-3275B600S
A15-3275B600S
A15-3275C601S
A15-3275C601S
A15-3275N716S
A15-3275N716S
A15-3275U593S
A15-3275U593S
A15-3275V594S
A15-3275V594S
A15-3275W595S
A15-3275W595S
A16-3275A599S
A16-3275A599S
A16-3275B600S
A16-3275B600S
A16-3275N716S
A16-3275N716S
A16-3275N768S
A16-3275N768S
A16-3275U593S
A16-3275U593S
A16-3275V594S
A16-3275V594S
A16-3276A599S
A16-3276A599S
A17-3275A599S
A17-3275A599S
A17-3275B600S
A17-3275B600S
A17-3275N716S
A17-3275N716S
A17-3275U593S
A17-3275U593S
A17-3275V594S
A17-3275V594S
A18-3275B600S
A18-3275B600S
A18-3275N716S
A18-3275N716S
A18-3275N768S
A18-3275N768S
A18-3275U593S
A18-3275U593S
A18-3275V594S
A18-3275V594S
A19-3275N716S
A19-3275N716S
A19-3275N768S

AS1134
AS1033
AS1133
AS1036
AS1136
AS1033
AS1133
AS1034
AS1134
AS1032
AS1132
AS1033
AS1133
AS1042
AS1142
AS1041
AS1141
AS1036
AS1136
AS1033
AS1133
AS1042
AS1142
AS1040
AS1140
AS1041
AS1141
AS1041
AS1141
AS1038
AS1138
AS1032
AS1132
AS1041
AS1141
AS1040
AS1140
AS1040
AS1140
AS1041
AS1141
AS1044
AS1144
AS1040
AS1140
AS1041
AS1141
AS1044
AS1144
AS1044
AS1144
AS1040
AS1140
AS1040
AS1140
AS1044
AS1144
AS1041
AS1141
AS1040

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

36

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
A19-3275N768S
A20-3275N716S
A20-3275N716S
A20-3275N768S
A20-3275N768S
A20-3275T592S
A20-3275T592S
A20-3275Z598S
A20-3275Z598S
A21-3275A599S
A21-3275A599S
A21-3275B600S
A21-3275B600S
A21-3275N768S
A21-3275N768S
A21-3275U593S
A21-3275U593S
A21-3275V594S
A21-3275V594S
A22-3275B600S
A22-3275B600S
A22-3275N768S
A22-3275N768S
A22-3275V594S
A22-3275V594S
A23-3275N768S
A23-3275N768S
A24-3275N768S
A24-3275N768S
A25-3275A599S
A25-3275A599S
A25-3275M1079
A25-3275M1079
A25-3275N768S
A25-3275N768S
A25-3275T592S
A25-3275T592S
A25-3275U593S
A25-3275U593S
A25-3275Z598S
A25-3275Z598S
A26-3275N768S
A26-3275N768S
A27-3275N768S
A27-3275N768S
A3275X596
A3275X596
A3275X596
A3275X596
A33-3275N768S
A33-3275N768S
A38-3275A599
A38-3275A599
A38-3275U593
A38-3275U593
A40-3275A599S
A40-3275A599S
A40-3275U593S
A40-3275U593S
A41-3275A599S

AS1140
AS1041
AS1141
AS1043
AS1143
AS1031
AS1131
AS1031
AS1131
AS1040
AS1140
AS1044
AS1144
AS1040
AS1140
AS1040
AS1140
AS1044
AS1144
AS1041
AS1141
AS1032
AS1132
AS1041
AS1141
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1041
AS1141
AS1038
AS1138
AS1031
AS1131
AS1040
AS1140
AS1031
AS1131
AS1032
AS1132
AS1036
AS1136
AS1039
AS1139
AS1041
AS1141
AS1040
AS1140
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
A41-3275A599S
A41-3275U593S
A41-3275U593S
A42-3275A599S
A42-3275A599S
A42-3275G501
A42-3275G501
A42-3275U593S
A42-3275U593S
A43-3275A599S
A43-3275A599S
A43-3275G501
A43-3275G501
A43-3275U593S
A43-3275U593S
A44-3275A599S
A44-3275A599S
A44-3275U593S
A44-3275U593S
A45-3275A599S
A45-3275A599S
A45-3275U593S
A45-3275U593S
A46-3275A599S
A46-3275A599S
A46-3275U593S
A46-3275U593S
A47-3275A599S
A47-3275A599S
A47-3275U593S
A47-3275U593S
A49-3275A599S
A49-3275A599S
A49-3275U593S
A49-3275U593S
A51-3275A599
A51-3275A599
A51-3275U593
A51-3275U593
A52-3275A599S
A52-3275A599S
A52-3275U593S
A52-3275U593S
A53-3275A599
A53-3275A599
A53-3275U593
A53-3275U593
A55-3275A599S
A55-3275A599S
A55-3275U593S
A55-3275U593S
A56-3275A599S
A56-3275A599S
A56-3275U593S
A56-3275U593S
A58-3275A599S
A58-3275A599S
A58-3275U593S
A58-3275U593S
A59-3275A599S

AS1138
AS1038
AS1138
AS1032
AS1132
AS1036
AS1136
AS1032
AS1132
AS1032
AS1132
AS1036
AS1136
AS1032
AS1132
AS1040
AS1140
AS1040
AS1140
AS1043
AS1143
AS1043
AS1143
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1032
AS1132
AS1032
AS1132
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

37

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
A59-3275A599S
A59-3275U593S
A59-3275U593S
A60-3275A599S
A60-3275A599S
A60-3275U593S
A60-3275U593S
A85-3275G501
A85-3275G501
A86-3275G501
A86-3275G501
A92-3275G501

AS1140
AS1040
AS1140
AS1032
AS1132
AS1032
AS1132
AS1036
AS1136
AS1036
AS1136
AS1031

A92-3275G501
A92-3275G501

AS1131
AS1033

A92-3275G501
B17-3275G501

AS1133
AS1031

B17-3275G501
B17-3275G501

AS1131
AS1033

B17-3275G501
R801001

AS1133
AS1036

R801001
R801002

AS1136
AS1038

R801002
R801004
R801004
R801005
R801005
R801006
R801006
R801040
R801040
R801041

AS1138
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1033
AS1133
AS1032

R801041
R801042

AS1132
AS1033

R801042
R801043
R801043
R801044
R801044
R801045
R801045
R801046
R801046
R801047
R801047
R801048
R801048
R801049
R801049
R801050
R801050
R801069
R801069
R801070
R801070
R801071

AS1133
AS1032
AS1132
AS1033
AS1133
AS1034
AS1134
AS1031
AS1131
AS1031
AS1131
AS1034
AS1134
AS1033
AS1133
AS1032
AS1132
AS1041
AS1141
AS1040
AS1140
AS1041

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
5.0 inch arm length only. Requires a Gunite
clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only.
5.0 inch arm length only. Requires a Gunite
clevis kit.
5.0 inch arm length only.
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires the use of either AS3001 or AS3017
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
R801071
R801072

AS1141
AS1040

R801072
R801073

AS1140
AS1040

R801073
R801074

AS1140
AS1041

R801074
R801075
R801075
R801076
R801076
R801077
R801077
R801078
R801078
R801079

AS1141
AS1041
AS1141
AS1042
AS1142
AS1039
AS1139
AS1039
AS1139
AS1040

R801079
R801080
R801080
R801081
R801081
R801082
R801082
R801083
R801083
R801084
R801084
R801085
R801085
R801086
R801086
R801087
R801087
R801088
R801088
R801100
R801100
R801101

AS1140
AS1040
AS1140
AS1042
AS1142
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1041
AS1141
AS1041
AS1141
AS1040
AS1140
AS1044
AS1144
AS1043

R801101
R801102

AS1143
AS1044

R801102
R802000
R802000
R802001
R802001
R802002
R802002
R802003
R802003
R802008
R802008
R802009
R802009
R802020
R802020
R802021
R802021

AS1144
AS1035
AS1135
AS1035
AS1135
AS1035
AS1135
AS1035
AS1135
AS1035
AS1135
AS1035
AS1135
AS1036
AS1136
AS1036
AS1136

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

38

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
R802022
R802022
R802023
R802023
R802030
R802030
R802031
R802031
R802032
R802032
R802033
R802033
R802040
R802040
R802041
R802041
R802042
R802042
R802043
R802043
R802044
R802044
R802045
R802045
R802050
R802050
R802051
R802051
R802052
R802052
R802053
R802053
R802060
R802060
R802061
R802061
R802062
R802062
R802063
R802063
R802070

AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038

R802070
R802071

AS1138
AS1038

R802071
R802072
R802072
R802073
R802073
R802074
R802074
R802075
R802075
R802260
R802260
R802261
R802261
R802262
R802262
R802263

AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1031
AS1131
AS1031
AS1131
AS1031
AS1131
AS1031

Requires a Gunite clevis kit.

Gunite
Aftermarket
Part Number

Meritor (continued)
R802263
R802270
R802270
R802271
R802271
R802276
R802276
R802277
R802277
R802280
R802280
R802281
R802281
R802290
R802290
R802291
R802291
R802292
R802292
R802293
R802293
R802300
R802300
R802301
R802301
R802302
R802302
R802303
R802303
R802310
R802310
R802311
R802311
R802312
R802312
R802313
R802313
R802314
R802314
R802315
R802315
R802316

AS1131
AS1031
AS1131
AS1031
AS1131
AS1031
AS1131
AS1031
AS1131
AS1031
AS1131
AS1031
AS1131
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032

Requires the use of either AS3000 or AS3016


clevis kits.

R802316
R802317

AS1132
AS1032

Requires a Gunite clevis kit.

R802317
R802318
R802318
R802319
R802319
R802320
R802320
R802321
R802321
R802330
R802330
R802331
R802331
R802332

AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032
AS1132
AS1032

R802332

AS1132

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Special Information

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

39

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Meritor (continued)
R802333

AS1032

R802333
R802350
R802350
R802351
R802351
R802354
R802354
R802355
R802355
R802356
R802356
R802357
R802357
R802360
R802360
R802361
R802361
R802362
R802362
R802363
R802363
R802370
R802370
R802371
R802371
R802400
R802400
R802401
R802401
R802402
R802402
R802403
R802403
R802410
R802410
R802411
R802411
R802412
R802412
R802413
R802413
R802414
R802414
R802415
R802415
R802416
R802416
R802417
R802417
R802420
R802420
R802421
R802421
R802422
R802422
R802423
R802423
R802430
R802430

AS1132
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1034
AS1134
AS1034
AS1134
AS1034
AS1134
AS1034
AS1134
AS1034
AS1134
AS1034
AS1134
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1039
AS1139
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140

Requires the use of either AS3000 or AS3016


clevis kits.

Gunite
Aftermarket
Part Number

Meritor (continued)

Requires a Gunite clevis kit.

R802431
R802431
R802432
R802432
R802433
R802433
R802440
R802440
R802441
R802441
R802442
R802442
R802443
R802443
R802444

AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040

Requires a Gunite clevis kit.

R802444
R802445

AS1140
AS1040

R802445
R802446

AS1140
AS1040

R802446
R802447

AS1140
AS1040

R802447
R802448
R802448
R802449
R802449
R802450
R802450
R802451
R802451
R802452
R802452
R802453
R802453
R802462

AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040
AS1140
AS1040

R802462

AS1140

R802463

AS1040

R802463
R802470
R802470
R802471
R802471
R802480
R802480
R802481
R802481
R802482
R802482
R802483
R802483
R802486

AS1140
AS1040
AS1140
AS1040
AS1140
AS1041
AS1141
AS1041
AS1141
AS1041
AS1141
AS1041
AS1141
AS1041

R802486
R802487

AS1141
AS1041

R802487
R802488
R802488

AS1141
AS1041
AS1141

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Special Information

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.

Requires the use of either AS3000 or AS3016


clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

40

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Meritor (continued)
R802489
R802489
R802490

AS1041
AS1141
AS1041

R802490
R802491

AS1141
AS1041

R802491
R802492
R802492
R802493
R802493
R802500
R802500
R802501
R802501
R802502
R802502
R802503
R802503
R802504
R802504
R802505
R802505
R802510
R802510
R802511
R802511
R802512

AS1141
AS1041
AS1141
AS1041
AS1141
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042
AS1142
AS1042

R802512
R802513

AS1142
AS1042

R802513
R802610
R802610
R802611
R802611
R802616
R802616
R802617
R802617
R802620
R802620
R802621
R802621
R802630
R802630
R802631
R802631
R802666

AS1142
AS1043
AS1143
AS1043
AS1143
AS1044
AS1144
AS1044
AS1144
AS1044
AS1144
AS1044
AS1144
AS1045
AS1145
AS1045
AS1145
AS1032

R802666
R802667

AS1032
AS1032

R802667

Requires a Gunite clevis kit.

Requires a Gunite clevis kit.

CS52315

AS1131

Requires a Gunite clevis kit.

CS52315

AS1033

Requires a Gunite clevis kit.

CS52315

AS1133

CS52316

AS1032

CS52316

AS1132

CS52316

AS1034

CS52316

AS1134

CS52317

AS1033

Requires the use of either AS3000 or AS3016


clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

CS52317

AS1133

Requires the use of either AS3000 or AS3016


clevis kits.

CS52320

AS1040

Requires the use of either AS3000 or AS3016


clevis kits.

CS52320

AS1140

CS52320

AS1042

CS52320

AS1142

CS52321

AS1039

CS52321

AS1139

CS52321

AS1041

CS52321

AS1141

CS52322

AS1041

CS52322

AS1141

CS52325

AS1043

CS52325

AS1143

CS52326

AS1044

CS52326
CS52330

AS1144
AS1036

CS52330

AS1136

CS52331

AS1036

CS52332

AS1035

Requires a Gunite clevis kit.


Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires the use of either AS3000 or AS3016
clevis kits.
Requires the use of either AS3000 or AS3016
clevis kits.

Special Information

Haldex Brake Systems - Midland (continued)


AS3001
AS3017
AS3003
AS3012
AS3011
AS3002
AS3013
AS4001
AS3019
AS1031

AS1132
AS4015
AS4006
AS4004
AS3000
AS3016
AS3018

Gunite
Aftermarket
Part Number

CQ36551
CQ36555
CQ36561
CQ36563
CQ36564
CQ36571
CQ36591
CQ36592
CQ36593
CS52315

Haldex Brake Systems - Midland


C365930
CQ19112
CQ19113
CQ36541
CQ36544
CQ36545

Industry Part
Number

Crewson Industries ASA. Requires the use of


either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

41

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems - Midland (continued)


CS52332

AS1135

CS52335

AS1038

CS52335

AS1138

CS52336

AS1038

CS52337

AS1037

CS52337

AS1137

CS52344

AS1033

CS52344

AS1133

CS52345

AS1041

CS52345

AS1141

CS52346

AS1032

CS52346
CS52347

AS1132
AS1040

CS52347
CS52348

AS1140
AS1033

CS52348
CS52349

AS1133
AS1041

CS52349
CS52350

AS1141
AS1044

CS52350
CS52353

AS1144
AS1031

CS52353

AS1131

CS52353

AS1033

CS52353

AS1133

CS52354

AS1032

CS52354

AS1132

CS52354

AS1034

CS52354

AS1134

CS52355

AS1039

CS52355

AS1139

CS52355

AS1041

CS52355

AS1141

CS52356

AS1040

CS52356

AS1140

CS52356

AS1042

CS52356

AS1142

Crewson Industries ASA. 5.0 inch arm length


only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
AS3003 clevis kit.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.0 inch
arm length only.
Crewson Industries ASA. 5.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.0 inch
arm length only.
Crewson Industries ASA. 6.0 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 5.5 inch
arm length only.
Crewson Industries ASA. 5.5 inch arm length
only.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits. 6.5 inch
arm length only.
Crewson Industries ASA. 6.5 inch arm length
only.

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems - Midland (continued)


CS52357

AS1043

CS52357
CS52358

AS1143
AS1036

CS52358
CS52359

AS1136
AS1038

CS52359
CS52360

AS1138
AS1036

CS52360
CS52361

AS1136
AS1038

CS52361
CS52362

AS1138
AS1032

CS52362
CS52363

AS1132
AS1033

CS52363
CS52364

AS1133
AS1040

CS52364
CS52365

AS1140
AS1041

CS52365
CS52366

AS1141
AS1044

CS52366
CS56000
CS56000
CS56001
CS56001
CS56002
CS56002
CS56003
CS56003
CS56004
CS56004
CS56005
CS56005
CS56006
CS56006
CS56007
CS56007
CS56008
CS56008
CS56009
CS56009
CS56010
CS56010
CS56011
CS56011
CS56012
CS56012
CS56013
CS56013
CS56014
CS56014
CS56031
CS56032
CS56033
CS56034
CS56035

AS1144
AS1034
AS1134
AS1042
AS1142
AS1045
AS1145
AS1033
AS1133
AS1041
AS1141
AS1044
AS1144
AS1032
AS1132
AS1040
AS1140
AS1043
AS1143
AS1035
AS1135
AS1031
AS1131
AS1037
AS1137
AS1039
AS1139
AS1036
AS1136
AS1038
AS1138
AS1131
AS1132
AS1133
AS1134
AS1135

Crewson Industries ASA. Requires the use of


either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3001 or AS3017 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Crewson Industries ASA. Requires the use of
either AS3000 or AS3016 clevis kits.
Crewson Industries ASA.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

42

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems - Midland (continued)


CS56036
CS56037
CS56038
CS56039
CS56040
CS56041
CS56042
CS56043
CS56044
CS56045
CS56046
CS56047
CS56048
CS56049
CS56050
CS56051
CS56052
CS56053
CS56054
CS56055
CS56056
CS56057
KN36540
KN36550
KN36560
KN36570
KN36580
KN36581
KN44041
KN44041
KN44051
KN44051
KN44061

AS1136
AS1137
AS1138
AS1139
AS1140
AS1141
AS1142
AS1143
AS1144
AS1145
AS1146
AS1147
AS1148
AS1149
AS1150
AS1151
AS1152
AS1153
AS1154
AS1155
AS1156
AS1157
AS3000
AS3001
AS3003
AS3002
AS4001
AS4009
AS1044
AS1144
AS1041
AS1141
AS1040

KN44061
KN44061

AS1140
AS1042

KN44061
KN47001
KN47001
KN47011

AS1142
AS1033
AS1133
AS1032

KN47011
KN47011

AS1132
AS1034

KN47011
KN47081
KN47081
KN48031
KN48031
KN52200
KN52200
KN52201
KN52201
KN52202
KN52202
KN52203
KN52203
KN52204
KN52204
KN52210
KN52210

AS1134
AS1033
AS1133
AS1036
AS1136
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1033
AS1133
AS1041
AS1141

Industry Part
Number

Gunite
Aftermarket
Part Number

Haldex Brake Systems - Midland (continued)


KN52211
KN52211
KN52212
KN52212
KN52213
KN52213
KN52214
KN52214
KN52220
KN52220
KN52221
KN52221
KN52222
KN52222
KN52223
KN52223
KN52224
KN52224
KN52230

AS1041
AS1141
AS1041
AS1141
AS1041
AS1141
AS1041
AS1141
AS1044
AS1144
AS1044
AS1144
AS1044
AS1144
AS1044
AS1144
AS1044
AS1144
AS1032

KN52230
KN52230

AS1132
AS1034

KN52230
KN52231

AS1134
AS1032

KN52231
KN52231

AS1132
AS1034

KN52231
KN52232

AS1134
AS1032

Requires a Gunite clevis kit

KN52232
KN52232

AS1132
AS1034

5.5 inch arm length only. Requires a Gunite


clevis kit
5.5 inch arm length only.

KN52232
KN52233

AS1134
AS1032

6.5 inch arm length only. Requires a Gunite


clevis kit
6.5 inch arm length only.

KN52233
KN52233

AS1132
AS1034

Requires a Gunite clevis kit

KN52233
KN52234

AS1134
AS1032

5.5 inch arm length only. Requires a Gunite


clevis kit
5.5 inch arm length only.

KN52234
KN52234

AS1132
AS1034

6.5 inch arm length only. Requires a Gunite


clevis kit
6.5 inch arm length only.

KN52234
KN52240

AS1134
AS1040

KN52240
KN52240

AS1140
AS1042

KN52240
KN52241

AS1142
AS1040

KN52241
KN52241

AS1140
AS1042

KN52241
KN52242

AS1142
AS1040

KN52242
KN52242

AS1140
AS1042

KN52242
KN52243

AS1142
AS1040

KN52243

AS1140

Requires a Gunite clevis kit

Requires a Gunite clevis kit


Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit

Special Information

Requires a Gunite clevis kit


Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

43

PRODUCTS CATALOG

CROSS REFERENCES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

Industry Part
Number

Gunite
Aftermarket
Part Number

Special Information

Industry Part
Number

Haldex Brake Systems - Midland (continued)


KN52243

AS1042

KN52243
KN52244

AS1142
AS1040

KN52244
KN52244

AS1140
AS1042

KN52244
KN52250
KN52250
KN52251
KN52251
KN52252
KN52252
KN52253
KN52253
KN52254
KN52254
KN52260

AS1142
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1036
AS1136
AS1043

KN52260
KN52260

AS1143
AS1045

KN52260
KN52261

AS1145
AS1043

KN52261
KN52261

AS1143
AS1045

KN52261
KN52262

AS1145
AS1043

KN52262
KN52262

AS1143
AS1045

KN52262
KN52263

AS1145
AS1043

KN52263
KN52263

AS1143
AS1045

KN52263
KN52264

AS1145
AS1043

KN52264
KN52264

AS1143
AS1045

KN52264
KN52270
KN52270
KN52271
KN52271

AS1145
AS1038
AS1138
AS1038
AS1138

6.5 inch arm length only. Requires a Gunite


clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit

Gunite
Aftermarket
Part Number

Special Information

Haldex Brake Systems - Midland (continued)


KN52272
KN52272
KN52273
KN52273
KN52274
KN52274
KN52280
KN52280
KN52290
KN52290
KN52300
KN52300
KN52310
KN52310
N12684C
N12684C

AS1038
AS1138
AS1038
AS1138
AS1038
AS1138
AS1035
AS1135
AS1031
AS1131
AS1037
AS1137
AS1039
AS1139
AS1040
AS1140

2010

AS1031

2010
2010

AS1131
AS1033

2010
2011

AS1133
AS1039

2011
2011

AS1139
AS1041

2011
2012
2012
2014

AS1141
AS1044
AS1144
AS1031

2014
2014

AS1131
AS1033

2014
2020

AS1133
AS1032

2020
2020
2020
2035
2035
2045
2045
2046
2046

AS1132
AS1034
AS1134
AS1035
AS1135
AS1033
AS1133
AS1033
AS1133

Requires a Gunite clevis kit


Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit
Requires a Gunite clevis kit

Sloan
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
5.5 inch arm length only. Requires a Gunite
clevis kit
5.5 inch arm length only.
6.5 inch arm length only. Requires a Gunite
clevis kit
6.5 inch arm length only.
Requires a Gunite clevis kit
Requires a Gunite clevis kit

5.0 inch arm length only. Requires a Gunite


clevis kit.
5.0 inch arm length only/
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only/
5.0 inch arm length only. Requires a Gunite
clevis kit.
5.0 inch arm length only/
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only/
Requires a Gunite clevis kit.
5.0 inch arm length only. Requires a Gunite
clevis kit.
5.0 inch arm length only/
6.0 inch arm length only. Requires a Gunite
clevis kit.
6.0 inch arm length only/
5.5 inch arm length only. Requires a Gunite
clevis kit.
5.5 inch arm length only/
6.5 inch arm length only.
6.5 inch arm length only.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.
Requires a Gunite clevis kit.

Replacement of other brands of slack adjusters should be done in axle sets.


Industry Part Numbers referencing more than a single interchange is the result of the Gunite Corporation offering the option of ordering its Automatic Slack Adjusters
with or without the clevis kit.

44

PRODUCTS CATALOG

NOTES
AUTOMATIC SLACK ADJUSTERS
FLEET LINE PRODUCTS

45

Gunite Corporation
FLEET LINE PRODUCTS
302 Peoples Avenue
Rockford, IL 61104-7092
Phone: 815.964.3301
Toll-Free: 800.677.3786
Fax: 815.964.0775
www.gunite.com

GUN1.0004 03/07

2007 Accuride Corporation

Accuride Corporation
7140 Office Circle
P.O. Box 15600
Evansville, IN 47716
Phone: 812.962.5000
Toll-Free: 800.823.8332
Fax: 812.962.5400
www.accuridecorp.com

You might also like