Professional Documents
Culture Documents
In physics the flow of energy, from a higher temperature to a lower temperature, due to
conduction, convection or radiation, is what we call heat. As heat is a form of energy it
is measured in the units of energy (Joules).
All bodies have internal energy. This is made up of the potential energy contained
within the inter-atomic bonds and the kinetic energy of the vibrations of the atoms.
The potential energy depends on the energy stored in the inter-atomic bonds and the
kinetic energy depends on the temperature.
The temperature of a body is a measure of the mean, random, kinetic energy of its
vibrating atoms.
The base SI unit of temperature is the Kelvin.
Absolute zero (0K) corresponds to a temperature of approximately -273 degree Celsius.
Specific heat capacity is the quantity of energy needed to raise the temperature of a
material, per kilogram per degree rise in temperature.
E = m*c*T
Electrical energy transferred by heater = increase in internal energy of material.
I*V*t = m*c*T
The sources of errors while measuring the specific heat capacity of solids are:
Energy is absorbed by the heater itself
Energy is lost to the surroundings, despite the lagging.
A little energy will be taken by the lagging
Inaccuracy of the thermometer, especially when temperature change is small
Inaccuracy of the meters.
One way of making allowance for the heat transferred to the surroundings is to
determine the gradient of a temperature-time graph line at the point where the line
first becomes linear.
Rate of electrical energy transferred by heater = rate of energy gained by
block.
Finding the specific heat capacity of a liquid poses a slight problem, as the liquid has to
be in some form of container, such as a glass beaker. This apparent difficulty can be
largely overcome by using an expanded polystyrene cup to contain the liquid.
The main sources of error when dealing with a liquid are:
Energy taken by the heater itself (making c too large)
Heat lost to the surroundings, mainly from the top of the cup (making c too
large)
Thermometer error, especially when temperature change is too small.
Meter errors
Small amount of energy taken by the thermometer and cup (making c too large)
In an ideal gas we assume that the inter-molecular forces are negligible, except during
collision. Furthermore, we assume that the collisions of the gas molecules with one
another and with the walls of any container are elastic.
As collisions between gas molecules take place randomly, there is a continuous
interchange of kinetic and potential energy in this way.
We also assume that the internal energy is entirely the kinetic energy. This means for
an ideal gas temperature is a measure of the total internal energy.
A hot body has a much greater concentration of internal energy compared with a cold
body.
We define heat as the random interchange of energy between two bodies in thermal
contact, resulting in energy flowing from hot to cold.
Energy can be transferred between two bodies in the form of work, irrespective of any
temperature difference; this work can either be mechanical or electrical.
Energy transfer by working is an ordered process and is independent of any
temperature difference.
The four states of matter are: solid, liquid, gas and plasma.
Because plasma is ionized, made up of charged particles, it can be controlled by
magnetic fields.
At the stage of phase change there is no rise in temperature although the material is
still receiving heat. This energy is used to break the potential bonds within the
molecules. It is called latent heat.
A temperature of 0K is called absolute zero because it is the lowest temperature that
can be reached.
A superconductor is a material that will conduct electricity without resistance when
cooled below a certain temperature.
This is how magnetic levitation works:
When the magnet is dropped and falls towards the superconductor, the change
in magnetic flux induces an electric current in the superconductor.
By Lenzs law the current flows in a direction such that its magnetic field opposes
that of the magnet and so the magnet is repelled.
As the superconductor has no resistance, the current in it continues to flow, even
though the magnet is no longer movies.
The magnet is permanently repelled and hovers above the superconductor.
Absolute zero is the temperature at which the molecules of matter have their lowest
possible average kinetic energy.
In practice, quantum mechanics requires that materials have a minimum kinetic energy
called the zero-point energy.
Assumptions
Gas molecules are in continuous random motion.
Experimental Evidence
Brownian motion