Professional Documents
Culture Documents
This is to certify the following students have successfully complete project work on14-MAY-2015 has
been submitted to Rajasthan Technical University, Kota in submitted in partial fulfillment of the
requirements for the award of Bachelor of Technology in Mechanical Engineering Gaurav Sharma
(11eaeme021),Digember Singh(11eaeme020),Mahipal Singh Yadav(11eaeme030),Imtiyaz Mo. Khan
(11eaeme024),ImtazHasan(11eaeme023),Deepak Gupta(11eaeme015) Under my guidance.
Asst. Professor
H.O.D.
Department of ME
Department of ME
AIET Alwar
AIET Alwar
CANDIDATES DECLARATION
We have declared that the work of project NON-METALLIC PEDAL DRILLING MACHINE is being
presented in the partial fulfillment of the requirement for the award of Bachelor of Technology in Mechanical
Engineering to Alwar Institute of Engineering & Technology, Alwar Affiliated to Rajasthan Technical
th
University, Kota is an authentic record of our work carried out during 8 semester under the supervision of our
guide Mr. Hemant Bansal Asst. Professor Department of Mechanical Engineering, Alwar Institute of
Engineering & Technology, Alwar.
The matter embodied in this report has not been submitted by us for the award of any other degree or diploma.
Date: 14-MAY-2015
Acknowledgement
The satisfaction that accompanies the successful completion of any task would be incomplete without the
mention of people whose ceaseless cooperation made it possible, whose constant guidance crowns all the efforts
with success.
It gives us immense pleasure to express my deep sense of gratitude to
Mr. Anil Kumar Mahawar, who gave opportunity to make this project pedal power Drilling, we have
appreciation and regards for their constant encouragement, constructive criticism and sympathetic
understanding throughout the course of this Project.
We would also like to thank to all members of Mechanical Department Of Alwar Institute of Engineering &
Technology specially Mr. Hemant Bansalfor providing us the relevant information in preparing my report. We
thank them for taking keen interest in our Project and guiding us.
My Special thanks to Mr. Hemant Bansal Sir of AIET Mech. Dept. for helping us throughout this entire project.
We also extent my warm thanks to our parents , who always encouraged us to work earnestly during the project
work.
Date:Place- MIA Alwar
Gaurav Sharma (11EAEME021)
Digember Singh (11EAEME020)
Mahipal Singh Yadav (11EAEME030)
Imtiyaz Mo. Khan (11EAEME024)
Imtaz Hasan(11EAEME023)
Deepak Gupta (11EAEME015)
Abstract
This is manually used for cutting metals and plastics. It is manually pedal operated system. In this rotator
motion of pedal is converted into reciprocating motion for cutting metal and plastics. Principle of pedal power
Drilling is to change circulatory motion or cyclic motion into translator motion with the help of metal
connecting rod. If we use dynamo then we can produce electricity which will be help to lighting the work piece
area when electricity is not available in mechanical workshop. Pedal power Drilling is easy machined tool and
is save power and time as compared to manually operated Drilling.
In this Pedal operated Drilling machine which can be used for industrial applications and Household needs in
which no specific input energy or power is needed. This project consists of a crank and slider mechanism. In the
mechanism pedal is directly connected to the Drilling through crank and slider mechanism for the processing of
cutting the wooden blocks, metal bars, pvc materials. The objective of the modal is using the conventional
mechanical process which plays a vital role. The main aim is to reduce the human effort for machining various
materials such as wooden blocks, steel, PVC etc. The power Drilling machine, which runs on human power,
works on the principle of the conversion of rotational motion to oscillatory motion. Importance of this project
lies in the very fact that it is green project and helps us to reduce our electricity need. Secondly, this cutter can
be used and transferred to our working place easily. Moreover, if we want we can generate electricity with our
project by connecting it to dynamo, diode and battery.
LIST OF CONTENTS
1.Subtitle
2.Subtitle.
ii
3.Certificate
iii
4.Candidates declaration.......
iv
5.Aknowledgement.
6.Abstract.......
vi
7.List of content.
vii
8.List of figures..
.ix
9.List of tables.....
10.List of abbreviations..
xi
Chapter 1 Introduction
1.1 Introduction:
1.2 History.........
2.5 Gear:.
10
3.2 Calculations:
10
3.3 Applications:...
11
14
14
14
15
16
17
18
20
21
22
4.3 Accessories.
22
23
24
List of Figure
Figure no.
2.1
Description
Page No.
5
Chain drive
bicycle frame
Gear
2.2
2.3
3.1
7
8
11
3.2
3.3
12
13
4.1
4.2
15
16
4.3
4.4
4.5
4.6
Hammer drill
Rotary hammer drill
Drill press
Geared head drill press
17
18
20
21
4.7
22
5.1
5.2
5.3
5.4
5.5
5.6
5.7
25
25
26
26
27
27
28
1
0
List of Table
Table No.
1
Description
Drilling capacity
Page No.
23
1
1
List of abbreviations
Sr.no.
1
2
3
4
name of symbol
m
fig
ft
rpm
Description
meter
figure
feet
revolution per minute
xii