Professional Documents
Culture Documents
Observe the following WARNINGS before installing and using this product.
1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
2. Only use replacement parts Orlaco recommends.
3. The installation method and materials should be capable of supporting four times the weight of the camera, pan
and tilt, monitor and other peripherals
4. External or internal grounding connection must be provided for a minimum size conductor of 1.0 mm
5. When included in an end use installation, it must conform to the ATEX requirements.
6. If modifications are done on the listed and certified equipment and manuals without prior notification to Orlaco the
EEx Atex responsibility has changed and may possibly no longer be upon Orlaco.
7. The information in this manual is only intended for persons with an Orlaco product where this manual has been
provided. Orlaco is not responsible for errors in the manual or a wrong interpretation of this manual
ENGLISH
EC-Declaration of conformity
According to Annex XB, ATEX guidelines 94/9/EC
Name manufacturer: Orlaco Products BV
Adress manufacturer:
A.Plesmanstraat 42, 3771 MN, Barneveld
The Netherlands, Europe
Declares that the product:
Productname: 18331 Percy Johns Quad system V1.0
Modellnumber(s):
0103970 EEx zoomcamera with 0504760 controlbox (non-EEx)
0209700 EEx Display 15" Enclosure
0209600 EEx controlpanel 15" enclosure
0181000 Compact camera CCC EEx-M 107
comply with the following prductspecifications:
EEx: Cenelec EN50014-1992, EN50016-1995 and EN50028-1987
EEx & non EEx: EMC 95/54/EC
Extra information:
Products are tested as independent units
Contacts The Netherlands: mr. G. van Beusekom
+31 342 404555
Notified body CE0344: Kema Quality BV,
Utrechtseweg 310, 6812 AR ARNHEM
The Netherlands, Europe
V2.2
J16
Power
Input
Pin 1 110/230V/Ac in
Pin 2 110/230V/Ac in
Pin 3 Earth
J17
to
LCD
Display
Coax core
Screen coax
Red
Black
0.4mm
0.4mm
0.6mm
0.6mm
1
2
3
4
zoom in
zoom out
Internal
focus in
Zoom in pink
ORL524-C
focus out
Focus blue
Focus White
0-lux yellow
auto focus
on/off
o-lux
on/off
camera
selector
bright
function
Tilt up purple
Bleu
0.22mm
Brown
0.22mm
Not connected
Yellow
0.22mm
Coax center
Pink
0.22mm
white
0.22mm
Red/black
0.22mm
Black
0.40mm
Purple
0.22mm
Grey
Black/ white
Red
Green
tilt up
tilt down
pan left
pan right
1
2
3
4
5
6
7
8
9
10
0.40mm
0.22mm
0.40mm
0.6mm
1
2
3
4
to J8
to J9
Cable (122025) 5 m
red
black
yellow
red
bleu
Dipswitch setting S1
If camera input C1 and C2 are connected make setting #1
If camera input C1 and C2 an C3 are connected make setting #2
If camera input C1, C2, C3, C4 are connected make the following setting #3
ON
#1
1
ON
3 4
#2
1
ON
3 4
3 4
ON
Blue
0.22mm
Yellow
0.22mm
Pink
Purple
Red
White
Green
Gray
Black
Brown
0.22mm
0.22mm
0.22mm or Red/Black
0.22mm
0.22mm
0.22mm
0.22mm or
0.22mm
White
Blue
Red
Black
#3
Dipswitch setting S2
3 4
1
2
3
4
1
2
3
4
5
6
7
8
9
10
1
2
3
4
to J10
to J11
to J12
to J1
to J3
toJ5
to J2
to J4
to J6
Cable (122025)
Green
0.4mm
(must be connected in ex-d junction box boom tip
but NOT CONNECTED to housing controlbox)
tilt up
tilt down
pan left
pan right
neutral
ON
3 4
Coax core
Screen coax
Red
Black
0.4mm
0.4mm
0.6mm
0.6mm
Camera 4
1
2
3
4
to J7
ENGLISH
Pen 1 white
Pen 2 black
Pen 3 yellow
Pen 4 red
Pen 5 blue
white
340
360
330
480
450
170mm
zoom out
focus in
focus out
auto focus
on/off
o-lux
on/off
camera
selector
bright
function
tilt up
tilt down
pan left
pan right
90
340mm
zoom in
zoom in
zoom out
focus in
focus out
auto focus
on/off
o-lux
on/off
camera
selector
bright
function
tilt up
tilt down
pan left
pan right
EX
JUNCTIONBOX
Power input
250V/Ac or 115V/AC
EX
JUNCTIONBOX
EX
JUNCTIONBOX
EX
JUNCTIONBOX
EX
JUNCTIONBOX
EX
JUNCTIONBOX