Professional Documents
Culture Documents
Copyright 2001 - 2009 MTain except where otherwise noted. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
MTain Inc.
Reliability, Maintainability, Testability, Safety and Logistics - Engineering Services
Data Element Description
Seq.#
Data Element
Identification
1
2
3
4
Operation Phase
Fault Symptom(s)
Date
Log No.:
WRA Reference
Designator
WRA:
Nomenclature
WRA Serial
Number
WRA Cum. Op
Hours
SRA Reference
Designator
6
7
8
9
10
11
SRA:
Nomenclature
SRA Serial
Number
Notes/ Comments
e.g. Flight, Test, Operational Deployment.
e.g. Loss of Transmitter
This may be allocated automatically by a
database utility
If a WRA is removed due to failure.
If a WRA is removed due to failure.
12
Description of
Failure Effects
13
Description of
Failure Cause
14
Fault detection/
isolation "OnEquipment"
15
Maintainers
Provisions
16
"On-Equipment"
Name
17
"On-Equipment"
Task time
18
"On-Equipment"
Maintainer
Improvements/
recommendations
Copyright 2001 - 2009 MTain except where otherwise noted. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
MTain Inc.
Reliability, Maintainability, Testability, Safety and Logistics - Engineering Services
Seq.#
19
Data Element
Identification
Fault detection/
isolation
"Off-Equipment"
20
Maintainers
Provisions
"Off-Equipment"
21
Name
22
"Off-Equipment"
MTTR
23
24
"Off-Equipment"
Fault detection/
isolation "OffEquipment"
Maintainer
Improvements/
recommendations
25
Disposition
26
Date
27
Names
28
CA No.:
Notes/ Comments
diagnostics was required
Provide details on BIT, use of support
equipment etc. that was used to aid in the fault
detect/ isolate task. To the SRA level, as the
WRA would of been removed from its
operational position
Provide details such as accessibility, handling
and tools used.
If required, as the remove unit (WRA/ SRA)
may be directly returned to the subcontractor,
vendor or Customer
If required, as the remove unit (WRA/ SRA)
may be directly returned to the subcontractor,
vendor or Customer
If required, as the remove unit (WRA/ SRA)
may be directly returned to the subcontractor,
vendor or Customer
Provide details on BIT, use of support
equipment etc. that was used to aid in the fault
detect/ isolate task
e.g. SRA was difficult to remove from its
operational position due to... or, the BIT/ test
points were ineffective and the use of additional
SE for diagnostics was required
The Reliability Engineer will enter the
disposition information.
Copyright 2001 - 2009 MTain except where otherwise noted. All rights reserved.
Reproduction in whole or in part without permission is prohibited.