Professional Documents
Culture Documents
COMPANY
BORETS
COMPANY
BORETS COMPANY
Operating Conditions
Parameter
Specifications
5 to 8.5
0.2
0.5 (1.0*)
0.01
1.25
150**
25
65
99
Pump Size
338
mm
inches
85.8
50 Hz
60 Hz
m3/day
BPD
m3/day
BPD
3.38**
30 - 370
189 - 2327
36 - 445
226 - 2800
92
3.62*
10 - 250
63 - 1572
12 - 300
75 - 1886
400
101.6
4.00**
10 - 994
63 - 6252
12 - 1193
75 - 7500
103
4.06*
15 - 966
94 - 6075
18 - 1159
113 - 7290
114
4.49*
650 - 1500
4088 - 9434
780 - 1800
4905 - 11320
130
5.12*
640 - 1800
4025 - 11320
768 - 2160
4830 - 13584
538
136.7
5.38**
139 - 2617
874 - 16459
167 - 3140
1050 - 19750
675
171.5
6.75**
530 - 2253
3333 - 14166
636 - 2703
4000 - 17000
172
6.77*
1280 - 4800
8050 - 30189
1536 - 5760
9660 - 36226
862
218.9
8.62**
1590 - 4305
10000 - 27083
1908 - 5168
12000 - 32500
950
241.3
9.50**
3640 - 6128
22917 - 38542
4273 - 7354
27500 - 46250
Our company offers several pump configurations depending on pump construction and pump stage design
to deliver reliable and efficient performance in real downhole conditions and meet the most demanding requirements of our clients.
The following configurations of Borets Electric Submersible Pumps are available and can be selected based
on pump construction, stage design and well conditions:
Configuration Options
Assembly Type
Pump Size
Pump Configuration
338
floater
compression
abrasion-resistant
compression type
packet
SA-FP-CT
ESPD
ESPM
ESPDP
400
SA-FP-CT
ESPD
ESPM
ESPMIK
ESPDP
ESPMIK
6B
ESPMIK
SA-FP-CT
538
SA-CP-CT
TA-CP-CT
SA-CP-CT
TA-CP-CT
ESPMIK
SA-CP-S
TA-CP-S
TA-CP-CT
5A
675
8
862
950
Borets ESP can be deployed in any operating environments, including more demanding downhole conditions such as high solids content, GOR and increased temperatures of process fluids.
In order to improve operation reliability in harsh abrasive conditions Borets offers
different pump configurations, namely compression, abrasion-resistant compression
and packet assembly pumps.
www.borets.com
BORETS
COMPANY
BORETS
COMPANY
Materials
Operating Conditions
Pump Stage Material
Standard
Complicated
Aggressive
(abrasive, corrosive)
Ni-resist Type 1
Ni-resist Type 4
+
+
Co-resist
Powdered Metal X100Cu25
+
+
+
+
ESP stages manufactured with powder metallurgy methods ensure high resistance to corrosion, friction pairs
wear and hydro-abrasive wear. Furthermore, pumps with powder metal stages are more energy efficient due to
finely finished surfaces of impeller flow channels.
The recommended operating range of all pump configurations is determined. It is essential to operate the
pump within this recommended range to achieve optimum efficiency and increase time between failures.
Pump head and base are made of high-strength steel. The heads and bases of pumps operated in aggressive well conditions are made of corrosion-resistant steel.
To avoid radial wear and vibration when operated in harsh environments, pumps are fitted with radial tungsten carbide bearings.
Borets offers corrosion and wear-resistant metal coatings applied to ESP housings, heads and bases that
effectively address aggressive well conditions. Increased hardness and ductility prevent these coatings from flex
cracking when installing and pulling out the downhole equipment.
Borets Company has developed anti-scaling polymer coating that allows for reduced scaling and low corrosion of ESP components that are used in high-temperature aggressive environments. This coating is applied to
pump stages, tubes, fasteners, heads and bases. Anti-scaling polymer coating protects ESP stages from scaling
and improves corrosion, wear and chemical resistance.