Professional Documents
Culture Documents
Contents
8
8
8
9
10
10
10
11
11
12
12
13
13
13
14
15
Variable-speed gearmotors
VARIGEAR wide V-belt variable speed gearmotors
VARIMOT friction-disc variable speed gearmotors
16
16
17
18
Servomotors
Synchronous servomotors
19
20
21
21
22
23
Additional features:
Low maintenance and long-term
reliability due to high brake service life
Fail-safe braking
Selectable braking torque
Noise-suppressed brake
Inverter duty
MOVIMOT drive motors up to 5 hp
with integrated frequency inverter
(see page 21)
MOVI-SWITCH drive motors up to 5 hp
with integrated switching function and
protection feature (see page 21)
0.08 to 100
two-speed
Frequency [Hz]
60 Hz (50 Hz optional)
208 to 575
200, 230 / 460, 575 for 2-, 4-, 6-, 8-pole motors
Enclosures
RX-Series1) (single-stage)
Output speed range
90 to 2,700 rpm
Output torque
Up to 7,350 lb-in
0.08 to 112 hp
Output torque
0.08 to 434 hp
Snuggler F-Series compact parallel shaft helical gearmotors are ideally suited for applications
where mounting space is restricted. Available in foot, flange and shaft mounted versions.
Output torque
0.08 to 337 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combined outputs achieved using SEW-Eurodrive single-stage
or multi-stage gear units with 2-, 4-, 6- and 8-pole or two-speed AC motors.
Low backlash PSF/PSKF planetary servo gear units with solid shaft
Size
MN
Nm / lb-in
Ratios
single-stage
two-stage
Circumferential
backlash[]
120
25 / 221
3, 4, 5, 7, 10
8, 4, 2
220
55 / 487
6, 3, 1
320
110 / 977
100
520
300 / 2,655
620
600 / 5,310
720
1,000 / 8,850
820
1,750 / 15,488
920
3,000 / 26,550
4, 5, 7, 10
4, 2, 1
Low backlash PSBF planetary servo gear units with flange-block shaft
Size
MN
Nm / lb-in
Ratios
single-stage
220
55 / 487
5, 7, 10
320
110 / 977
520
300 / 2,655
40, 49, 70
620
600 / 5,310
820
1,750 / 15,488
two-stage
20, 25, 28, 35, 40,
49, 70, 100
Circumferential
backlash[]
6, 3, 1
4, 2, 1
10
K-Series1) (three-stage)
Output speed range
Output torque
0.08 to 616 hp
S-Series1) (two-stage)
Output speed range
Output torque
Up to 35,400 lb-in
0.08 to 47 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combined outputs achieved using SEW-Eurodrive single-stage
or multi-stage gear units with 2-, 4-, 6- and 8-pole or two-speed AC motors.
TorqLOC
SEW-Eurodrives TorqLOC patented keyless hollow shaft design
simplifies shaft mounting with the F-Series (theSNUGGLER), K-Series
(helical-bevel) and S-Series (helical-worm) reducers, resulting in
time and cost savings for users and OEMs.
11
SPIROPLAN gearmotors
Thanks to their unique steel-on-steel gearing and wear-free, low-noise engineering, SEW single-stage SPIROPLAN right angle gearmotors
develop their power extremely reliably and quietly. The SPIROPLANs compact and rugged, lightweight aluminum housing makes installation
easy in applications where space is limited. Can be mounted vertically or horizontally.
11 to 210 rpm
Output torque
Up to 620 lb-in
0.08 to 1.0 hp
1) The values listed refer to a supply frequency of 60 Hz and reflect the combination options of SEW-Eurodrive gear units
with 4-, 6- and 8-pole or two-speed AC motors.
Size
MN
Nm / lb-in
Ratios
two-stage
Circumferential
backlash[]
202
40 / 354
6, 3
302
80 / 707
402
160 / 1,415
502
320 / 2,830
602
640 / 5,660
802
1500 / 13,265
Design versions:
BSF with B5 flange and solid shaft
BSBF with B5 flange and flange-block shaft
BSHF with B5 flange and hollow shaft with shrink disc
12
2- and 3-stage
Reduction ratios of 7:1 to 112:1
Up to 600,000 lb-in
Power Range
1 to 180 hp
Up to 4,000,000 lb-in
The M Series is often referred to as the big brother of the MC Compact. A compact drive
with three times the torque of the MC, the M Series delivers a whole lot of power, considering
the small space it requires. Available in up to nine sizes, depending on mounting position, the
M Series is easily adapted to industrial applications in the water treatment, pulp & paper and
mining/aggregate industries, to name just a few.
Helical, bevel-helical:
In the worlds largest applications where giant parabolic mirrors scan the sky, or huge
observatory and stadium roofs must be opened, enormous forces are necessary to move
the heavy loads involved. In these and equally demanding industrial applications, our
ultra-powerful Q Series planetary gear units get the job done. Whats more, their versatility
makes them easily customizable for special applications.
Up to 10,500,000
The CN Series helical and bevel-helical gear units are the perfect platform for customer-specific
applications and highly customized machines or systems where a standard gear unit might
not do the job. Various auxiliary modules are available which mount easily on the input and
output side of the unit to provide unmatched versatility for applications from mining to crane
construction to chemical processing.
Up to 6,034,000 lb-in
13
14
Light load
Type
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
620
SPIROPLANgear unit HW30
1,260
29 to 267
8.2:1 to 75:1
20 x 35 /
25 x 35
Helical-worm
1,150
gear unit HS40
1,460
11 to 299
7.28:1 to 201:1
20 x 35 /
25 x 35
* With wheel diameter 4.9 in. and input speed = 1,700 rpm
All sizes
Suitable for maximum loading (wheel
loads up to 8,100 lbs)
Gear ratios for precise speed matching
Heavy load
Type
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
HS41
1,635
2,250
17 to 483
7.28:1 to 201:1
25 x 35
HS50
5,310
4,160
17 to 483
7.28:1 to 201:1
30 x 60 /
35 x 70
HS60
5,310
5,620
16 to 465
7.56:1 to 217.41:1
45 x 90
Type
[in]
Maximum
torque
[lb-in]
Permitted
wheel
load [lbs]
Speed
* [fpm]
Ratios
Shaft
dxl
[mm]
HK30
1,770
2,250
33 to 656
5.36:1 to 106.38:1
25 x 35
HK40
3,540
4,160
27 to 605
5.81:1 to 131.87:1
30 x 60 /
35 x 70
HK50
5,310
5,620
24 to 266
13.25:1 to 145.14:1
45 x 90
HK60
7,250
8,100
24 to 266
13.22:1 to 144.79:1
55 x 110
* With wheel diameter 7.9 in. and input speed = 1,700 rpm
15
16
Variable-speed gearmotors
VARIGEAR
Maximum
motor power
Possible
configuration
VU/VZ 01
1 hp
U or Z
1:5
1:5
VU/VZ 11
2 hp
U or Z
1:7
1:6
VU/VZ 21
5 hp
U or Z
1:8
1:6
VU/VZ 31
7.5 hp
U or Z
1:8
1:6
VU/VZ 41
15 hp
U or Z
1:6
1:6
VU 51
30 hp
1:6
VU 6
60 hp
1:4
VARIMOT
Maximum
motor power
Maximum
speed range
D 16
1 hp
1:5
D 26
3 hp
1:5
D 36
7.5 hp
1:5
D 46
15 hp
1:4
feature. For all applications, IPOS plus makes no compromises when it comes to precision because
it uses the exact and highly-dynamic control properties of the drive inverter. The user can set the
programming to either Windows programming or high-level language. Thanks to the direct access
to all the internal inverter parameters, IPOS plus is fast and flexible. The result is a diverse movement
controller that can be tailored to meet the individual requirements of the system. The variety of
options available in MOVIDRIVE means that the system can be extended at any time in accordance
with the modular concept.
It is also possible to use the pre-programmed control programs, the application modules.
These application modules or the technology functions "electronic cam disc" and "internal
synchronous operation" enable MOVIDRIVE to take over the function of a position controller,
flying saw or other application solutions. At the same time, it offers quick parameter settings
rather than time-consuming programming. Simply enter the mechanical data and load the
program in the drive inverter, and it is ready for operation!
230V equipment
460V equipment
3 x 200 to 240 10 %
@ 50/60 Hz 5%
3 x 380 to 500 10 %
@ 50/60 Hz 5%
2 to 50
2 to 175
Fieldbus interface
17
18
MOVITRAC 07
230V equipment
Up to 5,500 max.
0.5 to 3
0.5 to 40
MOVITRAC 07
460V equipment
Up to 5,500 max.
0.75 to 40
Servomotors
Synchronous servomotors
2000 rpm
3000 rpm
4500 rpm
6000 rpm
Motor
Brakemotor
5 ... 68 Nm
1 ... 68 Nm
1 ... 68 Nm
1 ... 21 Nm
44 to 600 lb-in
9 to 600 lb-in
9 to 600 lb-in
9 to 186 lb-in
1.14 to 448
1.97 to 496
19
20
2 to 100
Enclosure
Ambient temperature
-25C to +40C
INTERBUS
Diagnostics
21
22
Classroom and
hands-on training
23
With uncompromising
quality that reduces the
cost and complexity of
daily operations.
With comprehensive
knowledge in virtually
every branch of
industry today.
With industry-leading
training and 24-hour
technical support, nationwide.
SEW-EURODRIVE
Driving the world
With a worldwide
service network that is
always close at hand.
Northeast Region
Assembly Center
SEW-Eurodrive, Inc.
Bridgeport, NJ
Tel. (856) 467-2277
Fax (856) 845-3179
csbridgeport@seweurodrive.com
Southeast Region
Assembly Center
SEW-Eurodrive, Inc.
Lyman, SC
Tel. (864) 439-7537
Fax (864) 439-7830
cslyman@seweurodrive.com
Southwest Region
Assembly Center
SEW-Eurodrive, Inc.
Dallas, TX
Tel. (214) 330-4824
Fax (214) 330-4724
csdallas@seweurodrive.com
Mexico
SEW-Eurodrive Sales and
Distribution SA de CV
Queretaro, Mexico
Tel. (011) 52-442-103-0300
Fax (011) 52-442-103-0301
scmexico@seweurodrive.com.mx
SEW-Eurodrive Co.
of Canada Ltd.
Bramalea, Ontario
Tel. (905) 791-1553
Fax (905) 791-2999
marketing@sew-eurodrive.ca
SEW-Eurodrive Co.
of Canada Ltd.
Delta, B.C.
Tel. (604) 946-5535
Fax (604) 946-2513
marketing@sew-eurodrive.ca
SEW-Eurodrive Co.
of Canada Ltd.
LaSalle, Quebec
Tel. (514) 367-1124
Fax (514) 367-3677
marketing@sew-eurodrive.ca
MOVIMOT, theSNUGGLER, SPIROPLAN, MOVILINK, MOVITRAC, IPOSPLUS and PT Pilot are registered trademarks of SEW-Eurodrive.
PROFIBUS is a registered trademark of PROFIBUS International. DeviceNet is a trademark of Open DeviceNet Vendor Association.
Windows is a registered trademark of Microsoft Corporation. National Electrical Code is a registered trademark of the National Fire Protection Association.
Western Region
Assembly Center
SEW-Eurodrive, Inc.
Hayward, CA
Tel. (510) 487-3560
Fax (510) 487-6381
cshayward@seweurodrive.com
www.seweurodrive.com (U.S.)
www.sew-eurodrive.ca (Canada)
North America: