Professional Documents
Culture Documents
2. Project Requirements
Part A: Design
In this part the student should provide the QoS design.
A1. It is assumed that the traffic sources for HDTV, VOD, VOIP and
Internet are connected to switch NYCORE1 to four different ports.
The following are the requirements: (10 points)
-
Traffic Type
COS
Note that the answers for COS assignments can be slightly different from
student to student, as we have 8 classes but only 4 types of traffic to classify.
A2. Explain in a short answer how or why you picked the highest
priority traffic and the lowest priority traffic? (5 points)
Calculate and provide the total bandwidth required for the customer
based on his subscribed package above:
A5. The switch has four queues on each port: 1, 2, 3 and 4. Assign a
queue to each type of traffic based on their COS. Assign the
percentage of the total bandwidth that should be reserved for each
2
queue, based on the bandwidth required for each type of traffic, use
the subscribe package description in A3. Provide your answer in the
form of the following table: (15 points)
Traffic Type
COS
Queue Number
% of total
bandwidth
Note that the queue assignment can be different from student to student,
and for the case of the project, we assume it is not important which queue is
assigned to each traffic type, as long as it has the right bandwidth
percentage for the corresponding COS.
Part B: Implementation
In this part, the student will provide the configuration.
Note 3: Make sure that the QoS is enabled on the switch you are configuring
QoS on.
Note 4: Configurations on switch NYCOR1 and switch NYCORE2 are
independent, meaning they can be done in different days for each switch.
B1. It is assumed that traffic sources are connected to NYCORE1
switch. Access iLab NYCORE1 and enable QoS on NYCORE1. (5
points)
-
B6. Reserve the bandwidth for each type of traffic, use the Shared
Round Robing method and your table from A5. (5 points)
-