Professional Documents
Culture Documents
TC670
General Description
Applications
A CLEAR option can be used to reset the ALERT signal, allowing the flexibility of connecting the ALERT
output of the TC670 with other ALERT/FAULT interrupts in the system. This feature can be implemented
so that false fan fault conditions do not initiate system
shutdown.
Package Type
THRESHOLD
GND
CLEAR
TC670
SOT-23A-6
6
SENSE
ALERT
VDD
ALERT
LED
4 V
DD
R4
0.1 F
3
CLEAR
From
R3
Microcontroller
1
R2
C
THRESHOLD
6 SENSE
SENSE
GND
2
+12V
ALERT 5
DC
DC
FAN
FAN
RSENSE
DS21688C-page 1
TC670
1.0
ELECTRICAL
CHARACTERISTICS
TABLE 1-1:
Symbol
THRESHOLD
GND
VDD...................................................................................6.0V
CLEAR
VDD
Description
Analog Input
Ground Terminal
Digital Input
Bias Supply Input
ALERT
SENSE
Analog Input
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise specified, all limits are specified at +25C, VDD = 3.0V to 5.5V,
CLEAR = Low. Boldface type specifications apply for temperature range of -40C to +85C.
Parameters
Sym
Min
Typ
Max
Units
Conditions
Supply Voltage
VDD
3.0
5.5
Supply Current
IDD
90
150
VIH
0.8VDD
VIL
0.2VDD
VTH(SENSE)
124
mV
RSENSE
50
0.0
2.4
Input Resistance
100
ALERTACC
-10
+10
VDD = 3.0V
VLOW
0.3
ISINK = 2.5 mA
tDELAY
176
ms
TA
-40
+85
TA
-40
+125
JA
230
C/W
Power Supply
CLEAR Input
SENSE Input
Input Level Threshold Voltage
Input Resistance
THRESHOLD Input
Temperature Ranges
Note 1: The TC670 will operate properly over the entire power supply range of 3.0V to 5.5V. As VDD varies from
3.0V, accuracy will degrade based on the percentage of VDD, as shown in Section 2.0, Typical
Performance Curves.
DS21688C-page 2
TC670
2.0
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
Note: Unless otherwise indicated, all limits are specified at +25C, VDD = 3.0V to 5.5V, CLEAR = Low.
115
110
160
+90C
100
+25C
95
90
-45C
85
140
105
80
75
100
80
60
40
3.0
3.3
3.6
3.9
4.2
4.5
4.8
5.1
5.4
5.7
VDD = 5.5V
20
0
0.5
70
2.7
VDD = 3.0V
120
1.5
VDD = 3.0V
VDD = 2.7V
VDD = 3.3V
0.00
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
177
VDD = 5.5V
VDD = 5.0V
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
FIGURE 2-3:
Voltage.
FIGURE 2-5:
VDD = 3.6V
0.25
4.5
ALERTACC (%)
0.00
2.50
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3.5
13000
12000
TA = -40C
11000
TA = +25C
10000
9000
8000
TA = +90C
7000
6000
5000
VDD = 3.0V
4000
3000
-10.0 -8.0 -6.0 -4.0 -2.0 0.0 2.0 4.0 6.0 8.0 10.0
FIGURE 2-2:
Voltage.
FIGURE 2-4:
ISINK.
15000
14000
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
2.5
FIGURE 2-1:
Voltage.
6.0
176
175
174
173
172
171
170
169
168
2.5
3.0
3.5
4.0
4.5
5.0
FIGURE 2-6:
ALERT Output Delay vs.
Power Supply Voltage.
DS21688C-page 3
TC670
Note: Unless otherwise indicated, all limits are specified at +25C, VDD = 3.0V to 5.5V, CLEAR = Low.
FIGURE 2-7:
CLEAR pin high to ALERT
pin high Timing Diagram.
DS21688C-page 4
TC670
3.0
PIN DESCRIPTIONS
TABLE 3-1:
Pin
No.
Symbol
THRESHOLD
GND
CLEAR
VDD
ALERT
SENSE
Analog Input
Description
Analog Input
Ground Terminal
Digital Input
Bias Supply Input
3.3
3.4
3.5
3.2
3.6
3.1
Ground (GND)
DS21688C-page 5
TC670
4.0
DETAILED DESCRIPTION
+5V
ALERT
Logic
R2
Frequency-toVoltage
GND
Bandgap
Oscillator
50 k
C
THRESHOLD
6 SENSE
SENSE
DC
FAN
FAN
RSENSE
SENSE
124 mV
DS21688C-page 6
+12V
ALERT 5
GND
2
FIGURE 4-2:
FIGURE 4-1:
CLEAR
R3
CLEAR
THRESHOLD
R4
0.1 F
3
VDD
ALERT
LED
4 V
DD
4.1
SENSE Input
TC670
The design of the proper input SENSE circuitry is a
matter of scaling RSENSE to provide the necessary
amount of gain and proper selection of the sensing
capacitor. The following table (Table 4-1) lists some
recommended values for RSENSE according to the
nominal operating current of the fan. Please note that
the current draw specified by the fan manufacturer may
be a worst-case rating and not the fans nominal operating current. If the fan current falls between two of the
values listed, it is recommended that the higher value
resistor is used.
TABLE 4-1:
RECOMMENDED VALUES
FOR RSENSE PER FIGURE 4-2
RSENSE ()
100
4.7
200
2.4
300
1.8
400
1.3
500
1.0
600
0.8
4.2.1
4.2.2
For a more exact fan fault trip point, the user can run
the fan at its minimum allowed speed. At this speed,
the threshold voltage can be adjusted until the ALERT
output is asserted.
4.3
CLEAR Input
4.2
4.4
THRESHOLD Input
ALERT Output
4.5
4.6
DS21688C-page 7
TC670
5.0
PACKAGE INFORMATION
5.1
cdef
1
Code
TC670ECH
DA
5.2
Taping Form
Component Taping Orientation for 6-Pin SOT-23A (EIAJ SC-74) Devices
PIN 1
DS21688C-page 8
Pitch (P)
Reel Size
8 mm
4 mm
3000
7 in.
TC670
5.3
p1
c
A
Units
Dimension Limits
n
p
MIN
A2
A1
INCHES*
NOM
MAX
MILLIMETERS
NOM
6
0.95
1.90
0.90
1.18
0.90
1.10
0.00
0.08
2.60
2.80
1.50
1.63
2.80
2.95
0.35
0.45
0
5
0.09
0.15
0.35
0.43
0
5
0
5
MIN
Number of Pins
6
Pitch
.038
p1
Outside lead pitch (basic)
.075
Overall Height
A
.035
.046
.057
Molded Package Thickness
.035
.043
.051
A2
Standoff
.000
.003
.006
A1
Overall Width
E
.102
.110
.118
Molded Package Width
.059
.064
.069
E1
Overall Length
D
.110
.116
.122
Foot Length
L
.014
.018
.022
Foot Angle
0
5
10
c
Lead Thickness
.004
.006
.008
Lead Width
B
.014
.017
.020
Mold Draft Angle Top
0
5
10
*Controlling Parameter
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not
exceed .005" (0.127mm) per side.
MAX
1.45
1.30
0.15
3.00
1.75
3.10
0.55
10
0.20
0.50
10
10
DS21688C-page 9
TC670
NOTES:
DS21688C-page 10
TC670
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
XXXX
Device
Temperature
Range
Package
Device:
TC670:
Temperature Range:
Package:
Examples:
a)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
DS21688C-page11
TC670
NOTES:
DS21688C-page 12
Note the following details of the code protection feature on Microchip devices:
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as unbreakable.
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break microchips code protection feature may be a violation of the Digital Millennium Copyright Act. If such
acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Trademarks
The Microchip name and logo, the Microchip logo, KEELOQ,
MPLAB, PIC, PICmicro, PICSTART, PRO MATE and
PowerSmart are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL
and The Embedded Control Solutions Company are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
Accuron, Application Maestro, dsPIC, dsPICDEM,
dsPICDEM.net, ECONOMONITOR, FanSense, FlexROM,
fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC,
microPort, Migratable Memory, MPASM, MPLIB, MPLINK,
MPSIM, PICC, PICkit, PICDEM, PICDEM.net, PowerCal,
PowerInfo, PowerMate, PowerTool, rfLAB, rfPIC, Select Mode,
SmartSensor, SmartShunt, SmartTel and Total Endurance are
trademarks of Microchip Technology Incorporated in the U.S.A.
and other countries.
Serialized Quick Turn Programming (SQTP) is a service mark of
Microchip Technology Incorporated in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
2003, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received QS-9000 quality system
certification for its worldwide headquarters,
design and wafer fabrication facilities in
Chandler and Tempe, Arizona in July 1999
and Mountain View, California in March 2002.
The Companys quality system processes and
procedures are QS-9000 compliant for its
PICmicro 8-bit MCUs, KEELOQ code hopping
devices, Serial EEPROMs, microperipherals,
non-volatile memory and analog products. In
addition, Microchips quality system for the
design and manufacture of development
systems is ISO 9001 certified.
DS21688C - page 13
M
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
Corporate Office
Australia
Rocky Mountain
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7966 Fax: 480-792-4338
China - Beijing
Boston
China - Chengdu
Atlanta
Chicago
333 Pierce Road, Suite 180
Itasca, IL 60143
Tel: 630-285-0071 Fax: 630-285-0075
Dallas
4570 Westgrove Drive, Suite 160
Addison, TX 75001
Tel: 972-818-7423 Fax: 972-818-2924
Detroit
Tri-Atria Office Building
32255 Northwestern Highway, Suite 190
Farmington Hills, MI 48334
Tel: 248-538-2250 Fax: 248-538-2260
Kokomo
2767 S. Albright Road
Kokomo, Indiana 46902
Tel: 765-864-8360 Fax: 765-864-8387
Los Angeles
18201 Von Karman, Suite 1090
Irvine, CA 92612
Tel: 949-263-1888 Fax: 949-263-1338
San Jose
Microchip Technology Inc.
2107 North First Street, Suite 590
San Jose, CA 95131
Tel: 408-436-7950 Fax: 408-436-7955
Toronto
6285 Northam Drive, Suite 108
Mississauga, Ontario L4V 1X5, Canada
Tel: 905-673-0699 Fax: 905-673-6509
China - Fuzhou
Microchip Technology Consulting (Shanghai)
Co., Ltd., Fuzhou Liaison Office
Unit 28F, World Trade Plaza
No. 71 Wusi Road
Fuzhou 350001, China
Tel: 86-591-7503506 Fax: 86-591-7503521
China - Shanghai
Microchip Technology Consulting (Shanghai)
Co., Ltd.
Room 701, Bldg. B
Far East International Plaza
No. 317 Xian Xia Road
Shanghai, 200051
Tel: 86-21-6275-5700 Fax: 86-21-6275-5060
China - Shenzhen
Microchip Technology Consulting (Shanghai)
Co., Ltd., Shenzhen Liaison Office
Rm. 1812, 18/F, Building A, United Plaza
No. 5022 Binhe Road, Futian District
Shenzhen 518033, China
Tel: 86-755-82901380 Fax: 86-755-82966626
China - Qingdao
Rm. B505A, Fullhope Plaza,
No. 12 Hong Kong Central Rd.
Qingdao 266071, China
Tel: 86-532-5027355 Fax: 86-532-5027205
India
Microchip Technology Inc.
India Liaison Office
Marketing Support Division
Divyasree Chambers
1 Floor, Wing A (A3/A4)
No. 11, OShaugnessey Road
Bangalore, 560 025, India
Tel: 91-80-2290061 Fax: 91-80-2290062
Japan
Microchip Technology Japan K.K.
Benex S-1 6F
3-18-20, Shinyokohama
Kohoku-Ku, Yokohama-shi
Kanagawa, 222-0033, Japan
Tel: 81-45-471- 6166 Fax: 81-45-471-6122
Korea
Microchip Technology Korea
168-1, Youngbo Bldg. 3 Floor
Samsung-Dong, Kangnam-Ku
Seoul, Korea 135-882
Tel: 82-2-554-7200 Fax: 82-2-558-5934
Singapore
Microchip Technology Singapore Pte Ltd.
200 Middle Road
#07-02 Prime Centre
Singapore, 188980
Tel: 65-6334-8870 Fax: 65-6334-8850
Taiwan
Microchip Technology (Barbados) Inc.,
Taiwan Branch
11F-3, No. 207
Tung Hua North Road
Taipei, 105, Taiwan
Tel: 886-2-2717-7175 Fax: 886-2-2545-0139
EUROPE
Austria
Microchip Technology Austria GmbH
Durisolstrasse 2
A-4600 Wels
Austria
Tel: 43-7242-2244-399
Fax: 43-7242-2244-393
Denmark
Microchip Technology Nordic ApS
Regus Business Centre
Lautrup hoj 1-3
Ballerup DK-2750 Denmark
Tel: 45 4420 9895 Fax: 45 4420 9910
France
Microchip Technology SARL
Parc dActivite du Moulin de Massy
43 Rue du Saule Trapu
Batiment A - ler Etage
91300 Massy, France
Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79
Germany
Microchip Technology GmbH
Steinheilstrasse 10
D-85737 Ismaning, Germany
Tel: 49-089-627-144-100
Fax: 49-089-627-144-44
Italy
Microchip Technology SRL
Via Quasimodo, 12
20025 Legnano (MI)
Milan, Italy
Tel: 39-0331-742611 Fax: 39-0331-466781
United Kingdom
Microchip Ltd.
505 Eskdale Road
Winnersh Triangle
Wokingham
Berkshire, England RG41 5TU
Tel: 44 118 921 5869 Fax: 44-118 921-5820
02/12/03
DS21688B-page 14