Professional Documents
Culture Documents
INTRODUCTION
These says, it's hard to image the production landscape without industrial automation systems. Growing
requirements of high product quality, paired with expectations of equally high -volume production,
mean that the scale of industrial automation will continue to grow. Much of what previously produced
by human hand can no longer be achieved in terns of cost and quality. Energy efficiency, mobility and
security arethe main challenges facing modern society.
Mitra Morakarya Tehnik, PT industrial automation product address all of these needs. Providing
outstanding reliability and rebustness, exellent quality and leading-edge innovations. Rich Funtionality
and extensive integration capabilities ensure easy design-in and fast time-to-market, The Industral
automation application is presented in the following level: The automation level illustrates the three main
levels as wll as the intercommunication between them.
Supervisor Level
(e.g.,IPC)
Office Network
(Mainly Ethernet based)
Control Level
(e.g.,PLC)
Factory Network(Field Bus Based)
Field Level
(e.g.,Peripheral Module)
Sensor, Actuator Interface
(Mainly point-to-point)Field Bus )
Head Office:
Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi 17836;
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
Scope of Business
Industrial Automation Unit
INSERTING PRESSING PIN MACHINE
This machine is the improvement on the speed and the precision that applicable in the
production of compressor crankcase that used for Motor Car Air Conditioning , The
advatage of this machine on such below features:
* The production capacity will increase five time compare with manuals
system. This is a result combining two process such as pin inserting and
crankcase pressing process
Head Office:
Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
Scope of Business
Industrial Automation Unit
AUTO SOLDERING MACHINE
"Mitra Morakarya Tehnik" auto soldering machine is the combination of automation
technology and mechanical and electrical system with some beneficial features as :
* The moving part using motor servo as driver with pointing precisian can achieve
0,0002mm and using PLC control program type C1JM-CPU23.
*The relay production capacity can achieve 20 pcs take in-out.
* Can detect the soldering quality as on setting standard.
* Featured with weekly timer for it is heater machine.
CURLING MACHINE
This machine is using for twisting the yarn for making hair of " Barbie Doll" manually
that complete with some features such as :
* Temperature sensor that using for detecting the temperature during
twisting process by application of some save hold relay or relay
scanner.
* Good quality of mechanical and cashing that using corm plating,
TRAINNING KIT
This machine is using for trainning kit that support by component
such as :
* Proximity sensors that function for detect the Relay-leg and support
by
PLC control type CP1A-30CDR.
* The machine can automatically split the good output and no good
output trainning.
* This machine using good quality for casing and other mechanical
Head Office:
Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
Scope of Business
Industrial Automation Unit
MANUAL COUNTIUNITY MACHINE
This machine is function for detecting relay contact (continuity) manually
with good precision and this machine is complete with flicker speed quality
adjustment with below specifications:
* This machine is using control type CPM1A-30CDT.
* The machine complete with pressure safety sensor.
* Good quality of mechanical and casing that using corm plating, aluminium
profile, "Misumi" parts, and support by surface teratment precision of
UNLOADER MACHINE
This machine is using for checking the precision of Relay-leg size
automatically that support by component such as :
* Proximity sensors that function for detect the Relay-leg and support by
PLC control type CJ1M-CPU11.
* The machine can automatically split the good output and no good output
for the amount 4 pcs at the same time.
Head Office:
Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
Head Office:
Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
CNC Lathe
CNC Center
CNC Lathe
Hand Cutting
Grinding Machine
Head Office:
Ruko Sentra Niaga Square F-28 Graha Asri
Cikarang-Bekasi 17836;
Tel : 021-89142788, 021-98131447,fax 021-89142788
E-mail : adm.mitratehnik@yahoo.com
CNC Lathe
Manual Lathe
Hand Drilling
Head Office
: 021-89142788, 021-98131447
: 021-89142788
: adm.mitratehnik@yahoo.com
Work Shop
: adm.mitratehnik@yahoo.com