Professional Documents
Culture Documents
AGT-525
MC-monitoring SA
NEWS 2013:
Digital linearization
Enhanced temperature stability
Galvanically isolated output
Extended frequency response on request up to 20kHz
APPLICATIONS
FEATURES
DESCRIPTION
The Model AGT-525 Air Gap Transducer is a high
accuracy, high linearity and high stability noncontacting capacitive measuring transducer system.
Thanks its very low profile design, the sensor can be
mounted on the stator wall of generator and electrical motor having an air gap in the range of 5 to 25
mm.
The noncontact capacitive type sensor measures the
distance between its underlying surface and a target
using the capacitive measuring principle.
PHYSICAL DIMENSIONS
4 pin connector
MC-monitoring SA
Signal Conditioner
Type: AGC-525 M1
P/N: 04.525.200 M1
S/N: xxxx
Stator
Ground
Mounting hole
diameter
5.5mm Air Gap
ADAPTER
Straight polyamid gland
Flexa-Quick for flexible conduit
Flexible polyamid PA-6 conduit
external diameter 15.8 mm, internal diameter 12 mm
Operating temperature max +115C
Conditioner
AGC-525
GENERAL SPECIFICATIONS
ELECTRICAL
Linear measuring range:
Outputs (Insulated 1500Vrms)
Output voltage - Pole profile
Sensitivity to distance
Tolerance of sensitivity
Output resistance
Output current- Pole profile
Current sensitivity
Tolerance of sensitivity
Minimum Gap output
Sensitivity
Residual ripple
Linearity of outputs
8 to 20 mm
5-8 mm and 20-25 mm
5 to 25 mm
(0.2 to 1in.)
AGT-525
Humidity (non-condensing)
Vibration
Shock
2 to 10V
0.4V/mm
1 % at 15 mm
< 100 Ohm, s. c.
proof
4 to 20 mA
0.8 mA/mm
1 % at 15 mm
2 to 10V
0.4V /mm
< depends on rotor
speed
EMC
Fluid compatibility
MECHANICAL
Sensor dimensions
POWER
Voltage
Current consumption
140 mA typical
Sensor
< 2 % of reading
< 5% of reading
Adapter module
resistant to 95 % RH
IEC 68 2.27 standard
5g peak, 10 Hz to 150 Hz.
IEC 68 2.27 standard,
15 g peak, 11ms
Sensor withstands
1.5Tesla in a 50 or 60 Hz
magnetic field
withstands contact with
water, oil, solvents,acids
without degradation of material.
Conditioner module
ORDERING INFORMATION
Air Gap Transducer with AGA
Type: AGT-525
P/N: 04.525.000
Due to the continual development of our products we reserve the right to modify the specifications without notification.
Published: 05.11.2006
Revised: 28.06.2013
Filed: 04.525.101_W_AGT525_e.pub
LOCAL REPRESENTATIVE
MC-monitoring SA
Route des Daillettes 6 ; P.O. Box 198
CH-1709 Fribourg, Switzerland
Phone : +41 26 401 84 56 Fax : +41 26 401 84 57
Email : info@mc-monitoring.com
www.mc-monitoring.com